The HTTP filtering system becomes even more complex! Though in this
case, it's pretty minimal, and definitely worth doing.
For instance, the following rule will allow connecting to localhost on
port :8080.
[[http.rules]]
host = "127.0.0.1"
port = 8080
action = "allow"
# Other rules as before.
Closes#540
Doesn't fix#515 (arguably makes it worse in the sense that it's more
likely to throw). However it should provide better error reporting, and
make it more clear that it's not CC:T's fault.
We can just scrape them from the @AutoService annotation, which saves us
having to duplicate any work. Hopefully fixes#501, but I haven't tested
in a non-dev environment yet.
When dealing with invalid paths (for instance, ones which are too long
or malformed), Java may throw a FileSystemException. This contains the
absolute path (i.e. C:/Users/Moi/.../.minecraft/...), which is printed
to the user within CC - obviously not ideal!
We simply catch this exception within the MountWrapper and map it back
to the local path. The disadvantage of doing it here is that we can't
map the path in the exception back to the computer - we'd need to catch
it in FileMount for that - so we just assume it referrs to the original
path instead.
Doing it in FileMount ends up being a little uglier, as we already do
all the exception wrangling in FileWrapper, so this'll do for now.
Fixes#495
It's no longer possible to implement this on the tile, due to the
conflict in getType. Given this is a really bad idea, it's not a big
issue, but we should mention it in the documentation.
Fixes#496.
This PR adds some documentation for APIs that did not have docs in the
source yet. This includes the:
* drive peripheral
* FS API
* OS PAI
* printer peripheral
* speaker peripheral
illuaminate does not handle Java files, for obvious reasons. In order to
get around that, we have a series of stub files within /doc/stub which
mirrored the Java ones. While this works, it has a few problems:
- The link to source code does not work - it just links to the stub
file.
- There's no guarantee that documentation remains consistent with the
Java code. This change found several methods which were incorrectly
documented beforehand.
We now replace this with a custom Java doclet[1], which extracts doc
comments from @LuaFunction annotated methods and generates stub-files
from them. These also contain a @source annotation, which allows us to
correctly link them back to the original Java code.
There's some issues with this which have yet to be fixed. However, I
don't think any of them are major blockers right now:
- The custom doclet relies on Java 9 - I think it's /technically/
possible to do this on Java 8, but the API is significantly uglier.
This means that we need to run javadoc on a separate JVM.
This is possible, and it works locally and on CI, but is definitely
not a nice approach.
- illuaminate now requires the doc stubs to be generated in order for
the linter to pass, which does make running the linter locally much
harder (especially given the above bullet point).
We could notionally include the generated stubs (or at least a cut
down version of them) in the repo, but I'm not 100% sure about that.
[1]: https://docs.oracle.com/javase/9/docs/api/jdk/javadoc/doclet/package-summary.html
- Refer to this as "data" rather than "metadata". I'm still not sure
where the meta came from - blame OpenPeripheral I guess.
- Likewise, use getItemDetail within inventory methods, rather than
getItemMeta.
- Refactor common data-getting code into one class. This means that
turtle.getItemDetail, turtle.inspect and commands.getBlockInfo all
use the same code.
- turtle.getItemDetail now accepts a second "detailed" parameter which
will include the full metadata (#471, #452).
- Tags are now only included in the detailed list. This is a breaking
change, however should only affect one version (1.89.x) and I'm not
convinced that the previous behaviour was safe.
This allows for configuring the size of computers and pocket computers,
as well as the max size of monitors.
There's several limitations with the current implementation, but it's
still "good enough" for an initial release:
- Turtles cannot be resized.
- GUIs do not scale themselves, so "large" sizes will not render within
the default resolution.
This exposes a basic peripheral for any tile entity which does not have methods
already registered. We currently provide the following methods:
- Inventories: size, list, getItemMeta, pushItems, pullItems.
- Energy storage: getEnergy, getEnergyCapacity
- Fluid tanks: tanks(), pushFluid, pullFluid.
These methods are currently experimental - it must be enabled through
`experimental.generic_peripherals`. While this is an initial step towards
implementing #452, but is by no means complete.
Well, mostly. We currently don't do recipe serializers as I'm a little
too lazy. For items, blocks and TE types this does make registration
nicer - we've some helper functions which help reduce duplication.
Some types (containers, TEs, etc..) are a little less nice, as we now
must define the registry object (i.e. the WhateverType<?>) in a separate
class to the class it constructs. However, it's probably a worthwhile
price to pay.
I'm really not very good at this modding lark am I? I've done a basic
search for other missing methods, and can't see anything, but goodness
knows.
Fixes#480
When calling .flip(), we limit the size of the buffer. However, this
limit is not reset when writing the next time, which means we get
out-of-bounds errors, even if the buffer is /technically/ big enough.
Clearing the buffer before drawing (rather than just resetting the
position) is enough to fix this.
Fixes#476 (and closes#477, which is a duplicate)
We never added back replacing of ${version} strings, which means that CC
was reporting incorrect version numbers in _HOST, the user agent and
network versions. This meant we would allow connections even on
mismatched versions (#464).
We shift all version handling into ComputerCraftAPI(Impl) - this now
relies on Forge code, so we don't want to run it in emulators.
This is simply exposed as a table from tag -> true. While this is less
natural than an array, it allows for easy esting of whether a tag is
present.
Closes#461
- Use texture over texture2D - the latter was deprecated in GLSL 1.30.
- Cache the tbo buffer - this saves an allocation when monitors update.
Closes#455. While the rest of the PR has some nice changes, it
performs signlificantly worse on my system.
This moves monitor networking into its own packet, rather than serialising
using NBT. This allows us to be more flexible with how monitors are
serialised.
We now compress terminal data using gzip. This reduces the packet size
of a max-sized-monitor from ~25kb to as little as 100b.
On my test set of images (what I would consider to be the extreme end of
the "reasonable" case), we have packets from 1.4kb bytes up to 12kb,
with a mean of 6kb. Even in the worst case, this is a 2x reduction in
packet size.
While this is a fantastic win for the common case, it is not abuse-proof.
One can create a terminal with high entropy (and so uncompressible). This
will still be close to the original packet size.
In order to prevent any other abuse, we also limit the amount of monitor
data a client can possibly receive to 1MB (configurable).
timetout, max_upload, max_download and max_websocket_message may now be
configured on a domain-by-domain basis. This uses the same system that
we use for the block/allow-list from before:
Example:
[[http.rules]]
host = "*"
action = "allow"
max_upload = 4194304
max_download = 16777216
timeout = 30000
This registers IPeripheral as a capability. As a result, all (Minecraft
facing) functionality operates using LazyOptional<_>s instead.
Peripheral providers should now return a LazyOptional<IPeripheral> too.
Hopefully this will allow custom peripherals to mark themselves as
invalid (say, because a dependency has changed).
While peripheral providers are somewhat redundant, they still have their
usages. If a peripheral is applied to a large number of blocks (for
instance, all inventories) then using capabilities does incur some
memory overhead.
We also make the following changes based on the above:
- Remove the default implementation for IWiredElement, migrating the
definition to a common "Capabilities" class.
- Remove IPeripheralTile - we'll exclusively use capabilities now.
Absurdly this is the most complex change, as all TEs needed to be
migrated too.
I'm not 100% sure of the correctness of this changes so far - I've
tested it pretty well, but blocks with more complex peripheral logic
(wired/wireless modems and turtles) are still a little messy.
- Remove the "command block" peripheral provider, attaching a
capability instead.
When creating a peripheral or custom Lua object, one must implement two
methods:
- getMethodNames(): String[] - Returns the name of the methods
- callMethod(int, ...): Object[] - Invokes the method using an index in
the above array.
This has a couple of problems:
- It's somewhat unwieldy to use - you need to keep track of array
indices, which leads to ugly code.
- Functions which yield (for instance, those which run on the main
thread) are blocking. This means we need to spawn new threads for
each CC-side yield.
We replace this system with a few changes:
- @LuaFunction annotation: One may annotate a public instance method
with this annotation. This then exposes a peripheral/lua object
method.
Furthermore, this method can accept and return a variety of types,
which often makes functions cleaner (e.g. can return an int rather
than an Object[], and specify and int argument rather than
Object[]).
- MethodResult: Instead of returning an Object[] and having blocking
yields, functions return a MethodResult. This either contains an
immediate return, or an instruction to yield with some continuation
to resume with.
MethodResult is then interpreted by the Lua runtime (i.e. Cobalt),
rather than our weird bodgey hacks before. This means we no longer
spawn new threads when yielding within CC.
- Methods accept IArguments instead of a raw Object array. This has a
few benefits:
- Consistent argument handling - people no longer need to use
ArgumentHelper (as it doesn't exist!), or even be aware of its
existence - you're rather forced into using it.
- More efficient code in some cases. We provide a Cobalt-specific
implementation of IArguments, which avoids the boxing/unboxing when
handling numbers and binary strings.
This uses the system described in #409, to render monitors in a more
efficient manner.
Each monitor is backed by a texture buffer object (TBO) which contains
a relatively compact encoding of the terminal state. This is then
rendered using a shader, which consumes the TBO and uses it to index
into main font texture.
As we're transmitting significantly less data to the GPU (only 3 bytes
per character), this effectively reduces any update lag to 0. FPS appears
to be up by a small fraction (10-15fps on my machine, to ~110), possibly
as we're now only drawing a single quad (though doing much more work in
the shader).
On my laptop, with its Intel integrated graphics card, I'm able to draw
120 full-sized monitors (with an effective resolution of 3972 x 2330) at
a consistent 60fps. Updates still cause a slight spike, but we always
remain above 30fps - a significant improvement over VBOs, where updates
would go off the chart.
Many thanks to @Lignum and @Lemmmy for devising this scheme, and helping
test and review it! ♥
Unknown blit colours, such as " " will be translated to black for the
background or white for the foreground. This restores the behaviour from
before #412.
- Write to a PacketBuffer instead of generating an NBT tag. This is
then converted to an NBT byte array when we send across the network.
- Pack background/foreground colours into a single byte.
This derives from some work I did back in 2017, and some of the changes
made/planned in #409. However, this patch does not change how terminals
are represented, it simply makes the transfer more compact.
This makes the patch incredibly small (100 lines!), but also limited in
what improvements it can make compared with #409. We send 26626 bytes
for a full-sized monitor. While a 2x improvement over the previous 58558
bytes, there's a lot of room for improvement.
- Remove the parenthesis around the text (so it's now
"Computer ID: 12"), rather than "(Computer ID: 12").
- Show the tooltip if the computer has an ID and no label (as well as
when in advanced mode).
This replaces the allow/block lists with a series of rules. Each rule
takes the form
[[http.rules]]
host = "127.0.0.0/8"
action = "block"
This is pretty much the same as the previous config style, in that hosts
may be domains, wildcards or in CIDR notation. However, they may also be
mixed, so you could allow a specific IP, and then block all others.
This is a backport of 1.15's terminal rendering code with some further
improvements. This duplicates a fair bit of code, and is much more
efficient.
I expect the work done in #409 will supersede this, but that's unlikely
to make its way into the next release so it's worth getting this in for
now.
- Refactor a lot of common terminal code into
`FixedWithFontRenderer`. This shouldn't change any behaviour, but
makes a lot of our terminal renderers (printed pages, terminals,
monitors) a lot cleaner.
- Terminal rendering is done using a single mode/vertex format. Rather
than drawing an untextured quad for the background colours, we use an
entirely white piece of the terminal font. This allows us to batch
draws together more elegantly.
- Some minor optimisations:
- Skip rendering `"\0"` and `" "` characters. These characters occur
pretty often, especially on blank monitors and, as the font is empty
here, it is safe to skip them.
- Batch together adjacent background cells of the same colour. Again,
most terminals will have large runs of the same colour, so this is a
worthwhile optimisation.
These optimisations do mean that terminal performance is no longer
consistent as "noisy" terminals will have worse performance. This is
annoying, but still worthwhile.
- Switch monitor rendering over to use VBOs.
We also add a config option to switch between rendering backends. By
default we'll choose the best one compatible with your GPU, but there
is a config option to switch between VBOS (reasonable performance) and
display lists (bad).
When benchmarking 30 full-sized monitors rendering a static image, this
improves my FPS[^1] from 7 to 95. This is obviously an extreme case -
monitor updates are still slow, and so more frequently updating screens
will still be less than stellar.
[^1]: My graphics card is an Intel HD Graphics 520. Obviously numbers
will vary.
This would return true for any block with a fluid in it, including
waterlogged blocks. This resulted in much broken behaviour
- Turtles cannot place blocks when waterlogged (fixedd #385)
- Turtles could move into waterlogged blocks (such as fences),
replacing them.
- Remove stub for table.pack/table.unpack.
- Remove Lua 5.3 bitlib stub. We're not on 5.3, there's no
point emulating it.
- Change peripheral.call to correctly adjust the error level. This is a
terrible hack, but I believe the only good option.
It'd be good to remove load as well, but it's a little more complex due
to our injecting of _ENV.
Closes#363
It hasn't been http_enable for yonks - slightly worried I didn't notice
this earlier.
Also don't refer to ComputerCraft.cfg - the name has changed several
times across versions, so let's leave it ambiguous.
- Return EPOCH if a zip entry's creation/modification/access time is
missing.
- If a BasicFileAttributes.*Time method returns null, use 0 as our
time. This shouldn't happen, but is a good sanity check.
Fixes#371
This means we are already provided with file attributes, which halfs[^1]
the time taken to scan folders.
[^1]: This dropped the fastest scan time from ~1.3s to ~0.6. It's by no
means a perfect benchmark, but this is still an obvious improvement.
- fs.getCapacity just returns the capacity of the current drive, if
available. This will be nil on rom mounts.
- fs.attributes returns an lfs like table of various file attributes.
Currently, this contains:
- access, modification, created: When this file was last accessed,
modified and created. Time is measured in milliseconds since the
epoch, same as os.epoch("utc") and what is accepted by os.date.
- size: Same as fs.getSize
- isDir: same as fs.isDir
Closes#262
- Move timer handling to IAPIEnvironment, rather than OSAPI. This means
the environment is reset on startup/shutdown, much like normal APIs.
- Websocket.receive now accepts an optional timetout (much like
rednet.receive). This starts a timer, and waits for it to complete.
Closes#201
- contains now performs a case-insensitive comparison. While this is a
little dubious, it's required for systems like Windows, where foo and
Foo are the same folder.
- Impose a depth limit on copyRecursive. If there are any other cases
where we may try to copy a folder into itself, this should prevent
the computer entirely crashing.
See #354
- Remove Lua script to generate recipes/advancements for coloured
disks, turtle upgrades and pocket upgrades. Replacing them with Lua
ones.
- Generate most block drops via the data generator system. Aside from
cables, they all follow one of two templates.
- Remove *Stream methods on IMount/IWritableMount, and make the channel
ones the primary.
- Fix location of AbstractTurtleUpgrade
- Make IComputerAccess.getAvailablePeripheral and .getMainThreadMonitor
mandatory.
- IComputerAccess throws a specialised NotAttachedException
Most of the port is pretty simple. The main problems are regarding
changes to Minecraft's rendering system.
- Remove several rendering tweaks until Forge's compatibility it
brought up-to-date
- Map rendering for pocket computers and printouts
- Item frame rendering for printouts
- Custom block outlines for monitors and cables/wired modems
- Custom breaking progress for cables/wired modems
- Turtle "Dinnerbone" rendering is currently broken, as normals are not
correctly transformed.
- Rewrite FixedWidthFontRenderer to to the buffer in a single sweep.
In order to do this, the term_font now also bundles a "background"
section, which is just a blank region of the screen.
- Render monitors using a VBO instead of a call list. I haven't
compared performance yet, but it manages to render a 6x5 array of
_static_ monitors at almost 60fps, which seems pretty reasonable.
Unfortunately we can't apply the config changes due to backwards
compatibility. This'll be something we may need to PR into Forge.
CraftTweaker support still needs to be added.
It appears that WB opens containers manually, and thus all of our stubs
network stubs are entirely ignored. Thus the only solution here is to
stub out the whole network handler code.
Thankfully this is simple enough - we do the same for Plethora and 1.14.
Fixes#328
This provides the following methods:
- dan200.computercraft.turtle.removeUpgrade(id: String)
- dan200.computercraft.turtle.removeUpgrade(stack: IItemStack)
- dan200.computercraft.turtle.addTool(id: String, craftItem: IItemStack[, toolItem: IItemStack][, kind: string])
While it's pretty minimal, it should allow for a reasonable amount of
functionality.
Closes#327 and #97.
Before it would remain the same across world reloads, and thus would be
out-of-date after leaving the first world. This architecture technically
allows for running multiple servers at once, though that's not going to
matter that soon.
This fixes them not rendering particles when broken. Particle rendering
is a little janky right now, as it uses the whole texture - we should
probably split up the texture into smaller images. Fixes#315
This should fix several issues (see #304, etc...). I'll try to get round
to PRing this into Forge at some point, though on the other hand this is
/super/ ugly.
This shouldn't matter either way - we don't expose it in the creative
menu, and there's no recipes for it. This should shut up a log message
though. Fixes#305.
This fixes monitor rendering underwater (closes#314). By default,
isSolid returns true if the render layer is SOLID. As we use CUTOUT due
to our funky TE rendering, we need to override this to return true
anyway.
This will cause some side effects, as monitors now blocking light
propagation, but I don't think that's the end of the world.
This is sufficiently useful a class, that it's worthwhile exposing it.
Hopefully we can slowly encourage other mods to migrate to it (well, at
least in 1.14), and so make error messages more consistent.
Also:
- Add Javadoc for all public methods
- Clarify the method names a little (getNumber -> getDouble,
getReal -> getFiniteDouble).
- Make the *Table methods return a Map<?,?> instead of
Map<Object, Object>.
Previously we were just returning the current tile. However, if someone
was holding a reference to this inventory (such as a GUI), then it'd be
outdated and invalid once the turtle had moved.
This caused a couple of issues:
- turtle_inventory events would not be fired when moving items in the
turtle GUI.
- As of 75e2845c01, turtles would no
longer share their inventory state after moving. Thus, removing items
from a GUI using an invalid inventory would move them from an old
tile, duplicating the items.
Fixes#298, fixes#300
Not quite sure when this changed, but I'm fairly sure isMouseOver wasn't
a thing when I wrote this. Or I'm a plonker. Both are possible.
Also fixes mouse dragging not being handled in turtles.
Fixes#299
Closes#293. Doesn't really solve anything there aside from exposing the
number, but sadly there's not really anything obvious I can do on my end
- the command API just doesn't expose anything else.
It appears several mods inject their own drops on the LOWEST priority,
meaning that we capture the existing drops, and the other mod will clear
the (now empty) drop list and add its own, resulting in dupe bugs.
While I'd argue it's somewhat dubious doing this on the LOWEST priority,
it's not a battle I'm prepared to fight. For now, we just remove the
block/entity drop handlers, and handle all drop logic when entities are
spawned.
Fixes#288
