- Move updateTick onto BlockGeneric/TileGeneric instead of the full
wired modem, as it is used by several tiles now.
- Make *Cable extend from *Generic, and schedule ticks instead of
running every tick.
We currently generate the crafting item once when the upgrade is first
created, and cache it for the duration of the game. As the item never
changes throughout the game, and constructing a stack is a little
expensive (we need to fire an event, etc...), the caching is worth
having.
However, some mods may register capabilities after we've constructed our
ItemStack. This means the capability will be present on other items but
not ours, meaning they are not considered equivalent, and thus the item
cannot be equipped.
In order to avoid this, we use compare items using their share-tag, like
Forge's IngredientNBT. This means the items must still be "mostly" the
same (same enchantements, etc...), but allow differing capabilities.
See NillerMedDild/Enigmatica2Expert#655 for the original bug report -
in this case, Astral Sourcery was registering the capability in init,
but we construct upgrades just before then.
- Move IDirectionalTile constraint from IPeripheralTile to
TilePeripheralBase.
- Make *WiredModemFull no longer inherit from *PeripheralBase. While
there is still some shared logic (namely in the syncing of "anim"),
it's largely fine as we don't store label or direction in NBT.
- Add a TickScheduler. This is a thread-safe version of
World.scheduleUpdate. We simply build a set of all TEs, and schedule
them to be updated the next tick.
- Make ModemState receive an "onChanged" listener, which is fired
whenever the modem changes.
- Make WiredModemFull no longer tick, instead scheduling updates when
it is first loaded and whenever the modem changes.
This is done in 1.13+ for items and blocks, so we might as well do it
for upgrades now. Note we can't do it for ender pocket modems, as the
upgrade ID is spelled incorrectly there.
- For those where placement is stored in the metadata (computers),
don't also set it in onBlockPlacedBy.
- Remove .getDefaultState(int, EnumFacing) override, as this means we
have more control over what is passed to us (namely, placer's
direction too).
"/computercraf" auto-completes to "/computercraft_copy" instead of
"/computercraft", which is rather annoying, as the former is not meant
to be used normally.
It's rather embarassing that it's been restructured _again_, but I think
this is a nice middle-ground. The previous implementation was written
mostly for Fabric, which doesn't always map perfectly to Forge.
- Move the message identifier into the registration phrase. It's not
really a property of the message itself, rather a property of the
registry, so better suited there.
- Move message handling into the message itself. Honestly, it was just
ending up being rather messy mixing the logic in two places.
This also means we can drop some proxy methods, as it's easier to
have conditionally loaded methods.
- Move network registry into a dedicated class, as that's what we're
doing for everything else.
This means we can avoid several rather ugly instances of getItemBlock
and a cast. We also derive the ItemBlock's registered name from the
block's name, which makes the register a little less ugly.
- Move the "world directory" getter out of the proxy - we can just use
Forge's code here.
- Remove the server proxies, as both were empty. We don't tend to
register any dedicated-server specific code, so I think we can leave
them out.
- All "named" entries (blocks, items, recipes, TEs and pocket/turtle
upgrades) are registeredin one place.
- Most client side models/textures are registered in ClientRegistry -
we can't do item colours or TEs for now, as these aren't event based.
- A little cleanup to how we handle ItemPocketComputer models.
This offers several advantages
- Less registration code: the subscribers are reigstered automatically,
and we don't need to worry about sided-proxies.
- We no longer have so many .instance() calls.
- Move SpeakerPeripheral's TileSpeaker functionality to a sub-class.
- Use Vec3d instead of BlockPos for speaker's positions.
- Use WorldUtil.dropItemStack to spawn in items.
- Remove redundant lock on ModemPeripheral.
- Move all HTTP tasks to a unified "MonitoredResource" model. This
provides a uniform way of tracking object's lifetimes and disposing
of them when complete.
- Rewrite HTTP requests to use Netty instead of standard Java. This
offers several advantages:
- We have access to more HTTP verbs (mostly PATCH).
- We can now do http -> https redirects.
- We no longer need to spawn in a new thread for each HTTP request.
While we do need to run some tasks off-thread in order to resolve
IPs, it's generally a much shorter task, and so is less likely to
inflate the thread pool.
- Introduce several limits for the http API:
- There's a limit on how many HTTP requests and websockets may exist
at the same time. If the limit is reached, additional ones will be
queued up until pending requests have finished.
- HTTP requests may upload a maximum of 4Mib and download a maximum
of 16Mib (configurable).
- .getResponseCode now returns the status text, as well as the status
code.
While Plethora has been updated to no longer require these, it's
probably worth keeping them around a little longer, as people may not
upgrade them in sync.
We've had this on SC for most of a year now (and SC 1 for most of its
lifetime) and not seen any issues. I'm fairly confident that it does not
allow breaking the sandbox.
- Move configuration loading into a separate file, just so it doesn't
clutter up ComputerCraft.java.
- Normalise property names, so they're all snake_case.
- Split properties into separate categories (http, turtle, peripheral),
so the main one is less cluttered.
- Define an explicit ordering of each category.
- Remove redundant constructors and super calls
- Standardise naming of texture fields
- Always use postfix notations for loops
- Cleanup several peripheral classes
Previously we would send computer state (labels, id, on/off) through the
ClientComputer rather than as part of the TE description. While this
mostly worked fine, it did end up making things more complex than they
needed to be.
We sync most data to the tile each tick, so there's little risk of
things getting out of date.
There's several reasons for this change:
- Try to make ComputerCraft.java less monolithic by moving
functionality into separate module-specific classes.
- Hopefully make the core class less Minecraft dependent, meaning
emulators are a little less dependent on anything outside of /core.
Note we still need /some/ methods in the main ComputerCraft class in
order to maintain backwards compatibility with Plethora and
Computronics.
Many bits of IInventory (open/close, fields, etc...) are not actually
needed most implementations, so we can clean things up a little with a
common interface.
Some methods act the same on both sides, and so can be in utility
classes. Others are only needed on one side, and so do not really need
to be part of the proxy.
- Remove TurtleVisionCamera. It would be possible to add this back in
the future, but for now it is unused and so should be removed.
- Move frame info (cursor blink, current render frame) into a
FrameInfo class.
- Move record methods (name, playing a record) into a RecordUtil class.
- getPickBlock is now implemented directly on computers and turtles,
rather than on the tile.
- Bounding boxes are handled on the block rather than tile. This ends
up being a little ugly in the case of BlockPeripheral, but it's not
the end of the world.
- Explosion resistance is only implemented for turtles now.
- Replace BlockCableCableVariant with a boolean, removing any custom
logic around it.
- Replace our previous cable Forge-blockstate with a vanilla one, which
handles cable connections in the model logic.
This ends up being slightly cleaner as we can rely on Minecraft's own
model dependency system. Also reduces reliance on Forge's APIs, which
_potentially_ makes porting a little easier.
- Remove the two redstone commands. These are not used (maybe only by
CCEdu), and so are somewhat redundant.
- Inline the select command, converting it to a lambda.
- Inline the attack/dig commands, as they did little more than wrap the
tool command.
As CCEdu has not been updated, and is unlikely to be updated as Dan does
not have the rights to open source it, we're removing explicit support
for now.
If an alternative arises in the future, it would be good to support, but
in a way which requires less workarounds in CC's core.
Most upgrades provides a couple of constant getters (upgrade ID,
adjective, crafting item). We move the getters into a parent class and
pass the values in via the constructor instead.
Also do a tiny bit of cleanup to the upgrades. Mostly just reducing
nesting, renaming fields, etc...
- Only generate resource pack mounts if the desired directory exists.
- Allow mounting files, as well as directories (fixes#90).
As always, also a wee bit of cleanup to some of the surrounding code.
This is implemented in a rather ugly way: we register a client command
(/computercraft_copy) which updates the clipboard, and run that via a
click handler on the chat message.
This hopefully makes wired modems a little easier to use. We'll see.
I don't think anyone has actually ended up using this, so it's unlikely
to break anything (though do tell me if this is the case). On the flip
side, this allows us to queue events on multiple computers, and means
we can provide a little more documentation.
Using turtle.suck on an inventory filled with tools would fill the
entire chest with said item, rather than extracting a single item. In
order to avoid that, we clamp the extract limit to the max stack size
when first extracting an item.
This also inlines the makeSlotList logic, which means we can avoid
creating an array for each inventory operation. This probably won't
have any meaninful performance impact (even on large inventories), but
is a nice optimisation to make.
- Remove a redundant logger
- Provide a getter for the ComputerCraft thread group. This allows us
to monitor child threads within prometheus.
- Replace a deprecated call with a fastutils alternative.
- Introduce a ModemState, which shares the open channels across all
modem instances of a wired modem.
- Keep a set of computers for all modem peripherals.
- Keep a map of computers -> (string, peripheral) for wired modem
peripherals. We shouldn't need this one, as you cannot attach one
modem to another, but it's good to be consistent.
One major change here is that modems will continue to be "on", even if
no computers are attached. This would substantially increase
implementation complexity, so I think this is an acceptable compromise
for now.
Should fix#74
We'd somehow added spaces, which means they weren't registered under the
computercraft domain (rather, the "computercraft " one). We also create
a datafixer to ensure old worlds are handled correctly.
The method to register new SoundEvents is private, which means that few
(if any) mods actually register them. Consequently, one could not use
the speaker to play any modded sound, as they weren't registered on the
server side.
Using SPacketCustomSound does mean we can no longer determine if a sound
exists or not, but I think a price I'm willing to pay in order to allow
playing modded sounds.
A lot of these don't actually have any effect as they'll only be called
on the main thread or they are getters where the state is guaranteed to
be consistent whenever it is accessed.
Hopefully this'll reduce the chance of world updates being blocked by
waiting for peripheral locks to be released.
- Bump MinecraftForge version so we don't crash on load. Oh boy, all
the deprecation warnings.
- Inject IBundledEmitter and IBundledReceiver capabilities onto all
TileGenerics.
- Register a IBundledRedstoneProvider instance for IBundledEmitter.
This is a preliminary for updating to 1.13, as many of the name changes
apply to both. This will make it harder to remain consistent with
actual CC, though that will be less of a consideration when 1.13 hits.
When placing a sign against a tile entity (such as a turtle or chest),
we would consider that block the "placed" one instead, meaning the text
was never set. This solution isn't entirely ideal either, but short of
capturing block snapshots I'm not sure of a better solution.
Fixes#552
Effectively shift extracting the computer away from Plethora into CC:T.
Ideally we wouldn't need this at all, but Plethora does some funky
things with tick timings.
See SquidDev-CC/plethora#125
Player construction can get a little expensive, and this is exacerbated
by Sponge. We now cache a turtle's fake player (updating the position
every time it is requested) in order to reduce this overhead.
- Try to make drop capturing a little more generic. This now allows for
capturing a block's drop at a given position, as well as any drop
within a bounding box (for things which don't play nicely).
- Use as much of Minecraft's block breaking logic as possible,
hopefully simplifying things and making it more consistent with other
mods.
As we only send the terminal to players using the GUI, the map interface
was never updated. We now will also send the terminal state to whoever
has the computer in their inventory.
This also marks the terminal as dirty when a new player picks the pocket
computer up, hopefully preventing any desync issues which might occur
then.
Fixes#42.
- Fix text table only showing the first row (fixes#40)
- Do not emit alignment characters in monospace environments
- Reduce padding in monospace environments
Also make the output of dump consistent with that of the profiler: we
provide tp and view shortcuts for each computer.
This uses a custom ComputerCraft packet to send chat messages to the
client. When received, we delete all messages of the same category
before sending the new ones.
This avoids cluttering the chat with near-identical messages, and helps
make working with the "individual dump" command easier, as the previous
computer's dump output is deleted.
Also change the max height of the TextTable to 18, so it fits within
Minecraft's default chat limit.
Whilst the legacy ones are important for backwards compatibility, they
cannot have an ID of 0, which introduces issues when they are the first
disk created in the world.
- Add additional maven metadata and strip dependencies
- Shift ICommand registration into the proxy, to avoid class loading
issues. This is probably rather temperamental, but classloading
always is.
- Trackers are created per-user, meaning multiple people can run
/computercraft track at once.
- Allow sorting the tracking information by arbitrary fields.
- Add support for tracking arbitrary fields (though none are currently
implemented).
- Abstract peripheral ID and type checking into separate class
- Update peripherals directly rather than marking as invalid then
fetching from the network.
- Update peripherals when adjacent tiles change
This does result in a slightly more ugly interface, but reduces the
amount of work needed to perform partial updates of peripherals, such as
those done by neighbouring tile updates.
Forge's default fake player implementation doesn't override all methods
which use the connection. As it is not set, we get an NPE and thus crash
the server. We simply stub those methods out ourselves to prevent such
an issue.
When initially attaching a modem, the adjacent computer would not show
up on its own peripheral list (like in vanilla CC). However, it would
show up when the chunk was reloaded as peripherals were added through a
different method.
This prevents such behaviour, always hiding the remote peripheral from
the object which provides it.
Closes#20
Shader mods may perform multiple passes when rendering a tile, so
monitors will be drawn transparently on later passes. In order to
prevent this we allow drawing the a single tile multiple times in a
tick.
The two recipes are pretty similar, so this allows us to substantially
simplify the code. This now introduces the additional requirement that
computers must be used to create turtles, rather than pocket computers
or another turtle.
This adds IComputerItem.withFamily(ItemStack, ComputerFamily) as well as
a ComputerFamilyRecipe class. Each type of computer (normal, turtle,
pocket) defines a recipe using this class, as they require a different
number of gold ingots to upgrade.
These act similarly to conventional wired modems, but with the advantage
that they are a full block. This means they can be attached to
peripherals which are not solid (such as chests). Further more, as they
do not have a direction, they allow wrapping peripherals on all 6 sides.
It's worth noting that wired modems do not require a cable - they will
automatically form connections to adjacent network elements when placed.
There are several important things to note here:
- The network element is associated with the cable, whilst the
peripheral (and so packet sender/receiver) is associated with the
modem. This allows us to have the main element be in the centre of
the cable block, whilst the modem is in the centre of the adjacent
computer.
- Cables will connect to any adjacent network element, not just
other cables.
- Rednet messages are now sent on the computer thread, rather than the
cable tick.
This provides a mechanism for peripherals to see what else a computer is
connected to - and then interact with those peripherals.
We also add the ability to query what block or tile a peripheral
targets. This allows one to interact with the original block of adjacent
peripherals instead.
Mostly intended for those people who don't like .inspect() or
.getItemDetail(), but could allow modpacks to block equipping upgrades,
placing blocks, etc...
The main aim of this is to allow for greater extensibility for other
mods. For instance, you can now prevent turtles placing dirt blocks, or
turning when on gravel.
As of #458, BlockPeripheral will act as a full/opaque block for some
peripherals and a transparent one for others. However, some Block
methods use the default state rather than the current one. This means
modems report being a full block when they are not, leading to
suffocating entities and lighting glitches.
As of #458, BlockPeripheral will act as a full/opaque block for some
peripherals and a transparent one for others. However, some Block
methods use the default state rather than the current one. This means
modems report being a full block when they are not, leading to
suffocating entities and lighting glitches.
This restructures monitor in order to make it thread-safe: namely
removing any world interaction from the computer thread.
Instead of each monitor having their own terminal, resize flag, etc...
we use a monitor "multiblock" object. This is constructed on the origin
monitor and propagated to other monitors when required.
We attempt to construct the multiblock object (and so the corresponding
terminal) as lazily as posible. Consequently, we only create the
terminal when fetching the peripheral (not when attaching, as that is
done on the computer thread).
If a monitor is resized (say due to placing/breaking a monitor) then we
will invalidate all references to the multiblock object, construct a new
one if required, and propagate it to all component monitors.
This commit also fixes several instances of glLists not being deleted
after use. It is not a comprehensive fix, but that is outside the scope
of this commit.
- Ensure usage is consistent
- Allow computer selectors to return multiple values
- Fix commands being marked as usable when it isn't
- Add /computercraft turn-on, a counter to /computercraft shutdown
As tiles outside the world border are not ticked, turtles are rendered
entirely useless. Furthermore, the turtle animation will never progress
resulting in visual glitches.
In order to avoid this, we ensure the target position is within the
world border when moving to it.
When a player places a turtle, they are marked as its owner. Any actions
they perform (such as breaking blocks, moving, etc...) are performed
using this player's game profile.
This allows turtles to work correctly with various permissions mods.
Previously you would have to whitelist all turtles in order for them to
function within a claim.
This means one can call .getFamily() in a thread-safe manner, ensuring
turtle.getFuelLimit() does not cause issues. As we use a specialist
TE class for each family this does not require any specialist caching.
This adds several commands which may be useful for server owners. It'd
be nice to integrate this into ComputerCraft itself, but the associated
command framework is quite large so we'd have to think about it.
ILuaAPI has been moved to dan200.computercraft.api.lua. One creates
a new API by registering an instance of ILuaAPIFactory. This takes an
instance of IComputerSystem and returns such an API.
IComputerSystem is an extension of IComputerAccess, with methods to
access additional information about the the computer, such as its label
and filesystem.
- Ensure pocket computers and turtles are distinguished by upgrades and
computer family.
- Ensure disks are distinguished by colour.
- Hide treasure disks from the list
This splits the computer state (blinking, label, etc...) and terminal
state into two separate packets. When a computer changes, the computer
state is sent to all players and the terminal state is sent to players
who are curerntly using the computer.
This reduces network usage by a substantial amount.
When printing on top of an already printed page, the previous contents
should be preserved. However, this did not occur as the stack had been
shrunk and so the item was no longer considered a printout.
ClosesSquidDev-CC/ComputerCraft#2
- Cable and modem can be broken individually
- Ray tracing will go through "holes" in the cable.
- Pick block will determine which part you are looking at.
- Selection box will only highlight the region you are looking at:
modem or cable.
This meant one could perform various illogical actions to
non-full-blocks, such as connecting fences and placing paitings.
We also modify the behaviour of isOpaqueCube and isFullCube for
peripherals, only returning false for the case of modems and cables.
Breaking a disk drive was not stopping the record being played as the
block event never reached the client. Instead, we send a custom packet
which starts/stops music at a given location.
We also remove all the plumbing for eventReceived/sendBlockEvent from
the generic block/tile classes, as they are no longer used.
Closes#443
- Convert most recipes to JSON
- Add JSON factories for impostor and turtle recipes.
- Several mappings changes
- Migrate to Forge's new registry system
Computer now delegates to IComputerEnvironment which, by default, looks
in the following locations:
- Resouce pack files
- The "debug" folder
- The original ComputerCraft jar
This makes use of new pocket computer light access peripherals have and adds said functionality to speaker. If noisy pocket has made sound the pocket computer light will turn dark blue for a second.
This uses a new utility class ArgumentHelper, which provides convenience
methods for parsing arguments from an array of Objects.
The format of error messages has also changed. It now follows a format
similar to Lua's native error messages - including the invalid argument
index, the expected type and the type actually received.
- BlockEvent.BreakEvent and BlockEvent.HarvestDropsEvent are fired when
digging.
- AttackEntityEvent is fired when attacking.
- Various PlayerInteractEvent.* events are fired when placing.
Closes#103, closes#100
Printers use a Terminal to store the page currently being printed.
Printers saved in an older version of ComputerCraft would be missing the
term_palette field, resulting in an NPE when loading the tile.
As a new SoundEvent was being created each time, the actual sound was
not in the registry, resulting in the sound -> id mapping yielding
incorrect values.
