1
0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-11-18 07:44:57 +00:00
gnss-sdr/CMakeLists.txt

3421 lines
158 KiB
CMake
Raw Normal View History

# GNSS-SDR is a Global Navigation Satellite System software-defined receiver.
# This file is part of GNSS-SDR.
#
# SPDX-FileCopyrightText: 2010-2022 C. Fernandez-Prades cfernandez(at)cttc.es
# SPDX-License-Identifier: BSD-3-Clause
################################################################################
# Project setup
################################################################################
if(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR})
2019-04-02 00:41:20 +00:00
message(FATAL_ERROR "Prevented in-tree build, it is bad practice.\nTry 'cd build && cmake ..' instead.")
2018-11-24 17:40:34 +00:00
endif()
# Select the release build type by default to get optimization flags.
# This has to come before project() which otherwise initializes it.
# Build type can still be overridden by setting -DCMAKE_BUILD_TYPE=
set(CMAKE_BUILD_TYPE "Release" CACHE STRING "")
2022-01-03 09:57:03 +00:00
cmake_minimum_required(VERSION 2.8.12...3.22)
project(gnss-sdr CXX C)
list(APPEND CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/Modules)
2016-11-27 22:47:45 +00:00
################################################################################
# Determine optional blocks/libraries to be built (default: not built)
# Enable them at the command line by doing 'cmake -DENABLE_XXX=ON ..'
################################################################################
2019-03-09 00:39:32 +00:00
include(FeatureSummary)
2015-05-03 08:15:51 +00:00
# Support of optional RF front-ends
option(ENABLE_UHD "Enable the use of UHD (driver for all USRP devices)" ON)
2019-03-09 00:39:32 +00:00
option(ENABLE_OSMOSDR "Enable the use of OsmoSDR and other front-ends (RTL-based dongles, HackRF, bladeRF, etc.) as signal source" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_LIMESDR "Enable the use of LimeSDR and Custom LimeSDR as signal source" OFF)
2017-10-31 14:40:14 +00:00
option(ENABLE_FMCOMMS2 "Enable the use of FMCOMMS4-EBZ + ZedBoard hardware, requires gr-iio" OFF)
2019-03-09 00:39:32 +00:00
2017-10-30 21:31:20 +00:00
option(ENABLE_PLUTOSDR "Enable the use of ADALM-PLUTO Evaluation Boards (Analog Devices Inc.), requires gr-iio" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_AD9361 "Enable the use of AD9361 direct to FPGA hardware, requires libiio" OFF)
option(ENABLE_RAW_UDP "Enable the use of high-optimized custom UDP packet sample source, requires libpcap" OFF)
2015-05-03 08:15:51 +00:00
option(ENABLE_FLEXIBAND "Enable the use of the signal source adater for the Teleorbit Flexiband GNU Radio driver" OFF)
option(ENABLE_ARRAY "Enable the use of CTTC's antenna array front-end as signal source (experimental)" OFF)
2015-05-03 08:15:51 +00:00
# Performance analysis tools
option(ENABLE_GPERFTOOLS "Enable linking to Gperftools libraries (tcmalloc and profiler)" OFF)
2019-03-09 00:39:32 +00:00
2015-05-03 08:15:51 +00:00
option(ENABLE_GPROF "Enable the use of the GNU profiler tool 'gprof'" OFF)
# Code correctness
option(ENABLE_CLANG_TIDY "Enable the use of clang-tidy when compiling" OFF)
2015-05-03 08:15:51 +00:00
# Acceleration
option(ENABLE_PROFILING "Enable execution of volk_gnsssdr_profile at the end of the building" OFF)
2019-03-09 00:39:32 +00:00
2015-05-03 08:15:51 +00:00
option(ENABLE_OPENCL "Enable building of processing blocks implemented with OpenCL (experimental)" OFF)
2019-03-09 00:39:32 +00:00
2015-08-25 17:01:02 +00:00
option(ENABLE_CUDA "Enable building of processing blocks implemented with CUDA (experimental, requires CUDA SDK)" OFF)
2019-03-09 00:39:32 +00:00
2019-08-12 09:53:53 +00:00
option(ENABLE_FPGA "Enable building of processing blocks implementing FPGA offloading" OFF)
2015-05-03 08:15:51 +00:00
# Building and packaging options
option(ENABLE_GENERIC_ARCH "Builds a portable binary" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_PACKAGING "Enable software packaging" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_OWN_GLOG "Download glog and link it to gflags" OFF)
2019-03-09 00:39:32 +00:00
2017-02-03 11:04:15 +00:00
option(ENABLE_OWN_ARMADILLO "Download and build Armadillo locally" OFF)
2019-03-09 00:39:32 +00:00
2015-05-23 09:20:26 +00:00
option(ENABLE_LOG "Enable logging" ON)
2019-03-09 00:39:32 +00:00
option(ENABLE_ARMA_NO_DEBUG OFF)
2020-06-10 21:01:26 +00:00
option(ENABLE_STRIP "Create stripped binaries without debugging symbols (in Release build mode only)" OFF)
option(Boost_USE_STATIC_LIBS "Use Boost static libs" OFF)
if(ENABLE_PACKAGING)
set(ENABLE_GENERIC_ARCH ON)
set(ENABLE_ARMA_NO_DEBUG ON)
set(CMAKE_VERBOSE_MAKEFILE ON)
set(ENABLE_STRIP OFF)
2018-11-24 17:40:34 +00:00
endif()
# Testing
option(ENABLE_UNIT_TESTING "Build unit tests" ON)
2019-03-09 00:39:32 +00:00
option(ENABLE_UNIT_TESTING_MINIMAL "Build a minimal set of unit tests" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_UNIT_TESTING_EXTRA "Download external files and build extra unit tests" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_SYSTEM_TESTING "Build system tests" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_SYSTEM_TESTING_EXTRA "Download external tools and build extra system tests" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_GNSS_SIM_INSTALL "Enable the installation of gnss_sim on the fly" ON)
option(ENABLE_OWN_CPUFEATURES "Force the building of the cpu_features library even if it is already installed" ON)
if(NOT (ENABLE_UNIT_TESTING_EXTRA OR ENABLE_SYSTEM_TESTING_EXTRA OR ENABLE_FPGA))
set(ENABLE_GNSS_SIM_INSTALL OFF)
endif()
if(ENABLE_SYSTEM_TESTING_EXTRA)
set(ENABLE_SYSTEM_TESTING ON)
2018-11-24 17:40:34 +00:00
endif()
option(ENABLE_OWN_GPSTK "Force to download, build and link GPSTk for system tests, even if it is already installed" OFF)
2019-03-09 00:39:32 +00:00
option(ENABLE_INSTALL_TESTS "Install QA code system-wide" OFF)
if(ENABLE_FPGA)
set(ENABLE_INSTALL_TESTS ON)
2018-11-24 17:40:34 +00:00
endif()
2016-11-27 22:47:45 +00:00
2020-06-21 19:10:22 +00:00
option(ENABLE_BENCHMARKS "Build code snippets benchmarks" OFF)
if(CMAKE_VERSION VERSION_LESS 3.5.1)
2020-06-21 19:10:22 +00:00
set(ENABLE_BENCHMARKS OFF)
endif()
2016-11-27 22:47:45 +00:00
option(ENABLE_EXTERNAL_MATHJAX "Use MathJax from an external CDN in HTML docs" ON)
option(ENABLE_ORC "Use (if available) the Optimized Inner Loop Runtime Compiler (ORC)" OFF)
################################################################################
2015-03-20 16:02:41 +00:00
# GNSS-SDR version information
################################################################################
set(THIS_IS_A_RELEASE OFF) # only related to version name, no further implications.
2015-01-13 10:11:23 +00:00
if(NOT ${THIS_IS_A_RELEASE})
find_package(Git)
set_package_properties(Git PROPERTIES
URL "https://git-scm.com"
DESCRIPTION "A free and open source distributed version control system (found: v${GIT_VERSION_STRING})"
PURPOSE "Manage version control, get MINOR_VERSION name for version number."
TYPE REQUIRED
2015-01-13 10:11:23 +00:00
)
2019-03-10 19:08:49 +00:00
if(GIT_FOUND)
# was this info set in the CMake commandline?
if(NOT GIT_BRANCH)
# no: try to find it
execute_process(
COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_BRANCH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
# was this info set in the CMake commandline?
if(NOT GIT_COMMIT_HASH)
# Get the latest abbreviated commit hash of the working branch
execute_process(
COMMAND ${GIT_EXECUTABLE} log -1 --format=%h
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_HASH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
endif()
2018-11-24 17:40:34 +00:00
endif()
set(VERSION_INFO_MAJOR_VERSION 0)
2018-11-24 17:40:34 +00:00
set(VERSION_INFO_API_COMPAT 0)
2015-01-13 10:11:23 +00:00
if(${THIS_IS_A_RELEASE})
2021-08-23 12:28:30 +00:00
set(VERSION_INFO_MINOR_VERSION 15)
2018-11-24 17:40:34 +00:00
else()
2021-08-23 12:28:30 +00:00
set(VERSION_INFO_MINOR_VERSION 15.git-${GIT_BRANCH}-${GIT_COMMIT_HASH})
2018-11-24 17:40:34 +00:00
endif()
2015-01-13 10:11:23 +00:00
set(VERSION ${VERSION_INFO_MAJOR_VERSION}.${VERSION_INFO_API_COMPAT}.${VERSION_INFO_MINOR_VERSION})
2016-11-27 22:47:45 +00:00
################################################################################
# Environment setup
################################################################################
include(ExternalProject)
2019-03-09 00:39:32 +00:00
# Detect 64-bits machine
2018-11-24 17:40:34 +00:00
if(CMAKE_SIZEOF_VOID_P EQUAL 8)
2018-11-19 07:51:05 +00:00
set(ARCH_64BITS TRUE)
2018-11-24 17:40:34 +00:00
endif()
# Set prefix path for PyBOMBS and Snaps, if defined in environment variables
if(NOT CMAKE_PREFIX_PATH)
if(DEFINED ENV{PYBOMBS_PREFIX})
set(CMAKE_PREFIX_PATH $ENV{PYBOMBS_PREFIX})
endif()
if(DEFINED ENV{SNAP})
set(CMAKE_PREFIX_PATH $ENV{SNAP})
endif()
endif()
2015-03-20 16:02:41 +00:00
# Detect Linux Distribution
2019-08-11 12:43:26 +00:00
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
include(DetectLinuxDistro)
2020-02-03 21:39:52 +00:00
if(CMAKE_CROSSCOMPILING)
message(STATUS "Configuring GNSS-SDR v${VERSION} to be cross-compiled on ${LINUX_DISTRIBUTION} ${LINUX_VER} (${CMAKE_HOST_SYSTEM_PROCESSOR}) for ${CMAKE_SYSTEM_PROCESSOR} ${ARCHITECTURE_STRING}")
else()
message(STATUS "Configuring GNSS-SDR v${VERSION} to be built on GNU/Linux ${LINUX_DISTRIBUTION} ${LINUX_VER} ${ARCHITECTURE_STRING}")
endif()
2018-11-24 17:40:34 +00:00
endif()
# Detect macOS / Mac OS X Version
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
include(DetectMacOSVersion)
message(STATUS "Configuring GNSS-SDR v${VERSION} to be built on ${MACOS_DISTRIBUTION}")
2018-11-24 17:40:34 +00:00
endif()
2018-08-16 08:02:51 +00:00
# Define extra build types and select Release by default to get optimization flags
include(GnsssdrBuildTypes)
# Available options:
# - None: nothing set
# - Debug: -O2 -g
# - Release: -O3
# - RelWithDebInfo: -O3 -g
# - MinSizeRel: -Os
# - Coverage: -Wall -pedantic -pthread -g -O0 -fprofile-arcs -ftest-coverage
# - NoOptWithASM: -O0 -g -save-temps
# - O2WithASM: -O2 -g -save-temps
# - O3WithASM: -O3 -g -save-temps
# - ASAN: -Wall -Wextra -g -O2 -fsanitize=address -fno-omit-frame-pointer
2018-11-24 17:40:34 +00:00
gnsssdr_check_build_type(${CMAKE_BUILD_TYPE})
message(STATUS "Build type set to ${CMAKE_BUILD_TYPE}.")
if(NOT (${CMAKE_BUILD_TYPE} STREQUAL "Release"))
set(ENABLE_STRIP OFF)
endif()
# Enable optimization options in GCC for Release and RelWithDebInfo build types
if((${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU") AND (CMAKE_CXX_COMPILER_ID STREQUAL "GNU"))
if(NOT (${LINUX_DISTRIBUTION} MATCHES "Fedora") AND NOT (${LINUX_DISTRIBUTION} MATCHES "Gentoo"))
# flag -O3 enables tree vectorization
# See https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-O3 -g -DNDEBUG")
set(CMAKE_C_FLAGS_RELEASE "-O3 -DNDEBUG")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "-O3 -g -DNDEBUG")
endif()
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
# Fix for Debug and None modes in macOS
# without this, get get a runtime error
include(CheckCXXCompilerFlag)
check_cxx_compiler_flag(-fstandalone-debug HAVE_STANDALONE_DEBUG)
check_cxx_compiler_flag(-Og HAVE_OG_FLAG)
if(HAVE_STANDALONE_DEBUG AND HAVE_OG_FLAG)
set(CMAKE_CXX_FLAGS_DEBUG "-Og -g -fstandalone-debug")
set(CMAKE_C_FLAGS_DEBUG "-Og -g -fstandalone-debug")
if(CMAKE_BUILD_TYPE STREQUAL "None")
add_compile_options(-Og -fstandalone-debug)
endif()
endif()
endif()
endif()
# allow 'large' files in 32 bit builds
if(UNIX)
2018-11-19 07:51:05 +00:00
add_definitions(-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES)
2018-11-24 17:40:34 +00:00
endif()
# If this is an out-of-tree build, do not pollute the original source directory
if(${CMAKE_BINARY_DIR} MATCHES ${CMAKE_SOURCE_DIR})
set(LOCAL_INSTALL_BASE_DIR ${CMAKE_SOURCE_DIR})
else()
set(LOCAL_INSTALL_BASE_DIR ${CMAKE_BINARY_DIR})
endif()
# Determine if CMake scripts make use of target_sources()
if(CMAKE_VERSION VERSION_GREATER 3.13)
set(USE_CMAKE_TARGET_SOURCES ON)
endif()
# Determine if we are using make or ninja
if(CMAKE_MAKE_PROGRAM MATCHES "make")
2018-11-19 07:51:05 +00:00
set(CMAKE_MAKE_PROGRAM_PRETTY_NAME "make")
2018-11-24 17:40:34 +00:00
endif()
if(CMAKE_MAKE_PROGRAM MATCHES "ninja")
2018-11-19 07:51:05 +00:00
set(CMAKE_MAKE_PROGRAM_PRETTY_NAME "ninja")
2018-11-24 17:40:34 +00:00
endif()
if(CMAKE_MAKE_PROGRAM MATCHES "xcodebuild")
set(CMAKE_MAKE_PROGRAM_PRETTY_NAME "xcodebuild")
endif()
if(NOT CMAKE_MAKE_PROGRAM_PRETTY_NAME)
2018-11-19 07:51:05 +00:00
set(CMAKE_MAKE_PROGRAM_PRETTY_NAME "${CMAKE_MAKE_PROGRAM}")
2018-11-24 17:40:34 +00:00
endif()
2020-01-28 23:29:09 +00:00
if(CMAKE_VERSION VERSION_LESS 3.12)
2020-01-28 23:56:19 +00:00
if(POLICY CMP0057) # required by FindDoxygen.cmake module
cmake_policy(SET CMP0057 NEW) # Support if() IN_LIST operator, added in CMake 3.3
2020-01-28 23:29:09 +00:00
endif()
endif()
2020-01-28 23:56:19 +00:00
2016-11-27 22:47:45 +00:00
################################################################################
# Minimum required versions
################################################################################
set(GNSSSDR_GCC_MIN_VERSION "4.7.2")
set(GNSSSDR_CLANG_MIN_VERSION "3.4.0")
set(GNSSSDR_APPLECLANG_MIN_VERSION "500")
set(GNSSSDR_GNURADIO_MIN_VERSION "3.7.3")
set(GNSSSDR_BOOST_MIN_VERSION "1.53")
set(GNSSSDR_PYTHON_MIN_VERSION "2.7")
set(GNSSSDR_PYTHON3_MIN_VERSION "3.4")
set(GNSSSDR_MAKO_MIN_VERSION "0.4.2")
set(GNSSSDR_ARMADILLO_MIN_VERSION "5.300.0")
set(GNSSSDR_GFLAGS_MIN_VERSION "2.1.2")
2018-02-24 17:01:10 +00:00
set(GNSSSDR_MATIO_MIN_VERSION "1.5.3")
set(GNSSSDR_PROTOBUF_MIN_VERSION "3.0.0")
################################################################################
# Versions to download and build (but not installed) if not found
################################################################################
2018-11-12 10:03:50 +00:00
set(GNSSSDR_GFLAGS_LOCAL_VERSION "2.2.2")
set(GNSSSDR_GLOG_LOCAL_VERSION "0.5.0")
2022-01-04 10:33:06 +00:00
set(GNSSSDR_ARMADILLO_LOCAL_VERSION "10.8.x")
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0) OR
(CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.0))
set(GNSSSDR_GTEST_LOCAL_VERSION "1.10.x")
else()
set(GNSSSDR_GTEST_LOCAL_VERSION "1.11.0")
endif()
set(GNSSSDR_GNSS_SIM_LOCAL_VERSION "master")
set(GNSSSDR_GPSTK_LOCAL_VERSION "8.0.0")
2021-03-28 16:16:29 +00:00
set(GNSSSDR_MATIO_LOCAL_VERSION "1.5.21")
set(GNSSSDR_PUGIXML_LOCAL_VERSION "1.12")
set(GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION "3.19.4")
2022-01-17 08:50:51 +00:00
set(GNSSSDR_BENCHMARK_LOCAL_VERSION "1.6.1")
set(GNSSSDR_MATHJAX_EXTERNAL_VERSION "2.7.7")
if(CMAKE_VERSION VERSION_LESS "3.3")
set(GNSSSDR_GLOG_LOCAL_VERSION "0.4.0") # Fix for Debian 8
endif()
if(CMAKE_VERSION VERSION_LESS "3.0.2")
set(GNSSSDR_GFLAGS_LOCAL_VERSION "2.2.1") # Fix for CentOS 7
set(GNSSSDR_GLOG_LOCAL_VERSION "0.3.4") # Fix for Ubuntu 14.04
2018-11-24 17:40:34 +00:00
endif()
################################################################################
# Check compiler version
################################################################################
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
2018-11-19 07:51:05 +00:00
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${GNSSSDR_GCC_MIN_VERSION})
message(STATUS "Your GCC version is too old and does not support some C++ features required by GNSS-SDR. GCC version must be at least ${GNSSSDR_GCC_MIN_VERSION}")
message(FATAL_ERROR "Fatal error: GCC >= ${GNSSSDR_GCC_MIN_VERSION} required.")
2018-11-24 17:40:34 +00:00
endif()
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
execute_process(COMMAND
${CMAKE_CXX_COMPILER} -v
RESULT_VARIABLE _res ERROR_VARIABLE _err
2019-04-02 00:41:20 +00:00
ERROR_STRIP_TRAILING_WHITESPACE
)
if(${_res} STREQUAL "0")
# output is in error stream
string(REGEX MATCH "^Apple.*" IS_APPLE ${_err})
if("${IS_APPLE}" STREQUAL "")
set(MIN_VERSION ${GNSSSDR_CLANG_MIN_VERSION})
set(APPLE_STR "")
# retrieve the compiler's version from it
string(REGEX MATCH "clang version [0-9.]+" CLANG_OTHER_VERSION ${_err})
string(REGEX MATCH "[0-9.]+" CLANG_VERSION ${CLANG_OTHER_VERSION})
2018-11-24 17:40:34 +00:00
else()
set(MIN_VERSION ${GNSSSDR_APPLECLANG_MIN_VERSION})
set(APPLE_STR "Apple ")
# retrieve the compiler's version from it
string(REGEX MATCH "(clang-[0-9.]+)" CLANG_APPLE_VERSION ${_err})
string(REGEX MATCH "[0-9.]+" CLANG_VERSION ${CLANG_APPLE_VERSION})
2018-11-24 17:40:34 +00:00
endif()
if(${CLANG_VERSION} VERSION_LESS "${MIN_VERSION}")
message(WARNING "\nThe compiler selected to build GNSS-SDR (${APPLE_STR}Clang version ${CLANG_VERSION} : ${CMAKE_CXX_COMPILER}) is older than that officially supported (${MIN_VERSION} minimum). This build may or not work. We highly recommend using Apple Clang version ${APPLECLANG_MIN_VERSION} or more recent, or Clang version ${CLANG_MIN_VERSION} or more recent.")
2018-11-24 17:40:34 +00:00
endif()
else()
message(WARNING "\nCannot determine the version of the compiler selected to build GNSS-SDR (${APPLE_STR}Clang : ${CMAKE_CXX_COMPILER}). This build may or not work. We highly recommend using Apple Clang version ${APPLECLANG_MIN_VERSION} or more recent, or Clang version ${CLANG_MIN_VERSION} or more recent.")
2018-11-24 17:40:34 +00:00
endif()
endif()
# Determine if we use lambdas
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS "6.1.1")
set(DO_NOT_USE_LAMBDAS ON)
endif()
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
if(CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang")
if(CLANG_VERSION VERSION_LESS "600")
set(DO_NOT_USE_LAMBDAS ON)
endif()
else()
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS "3.5.0")
set(DO_NOT_USE_LAMBDAS ON)
endif()
endif()
endif()
# Determine if we try to use generic lambdas
if(NOT DO_NOT_USE_LAMBDAS)
if(CMAKE_VERSION VERSION_GREATER 3.1 AND NOT ((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND
(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 7.0)))
set(USE_GENERIC_LAMBDAS ON)
endif()
endif()
2016-11-27 22:47:45 +00:00
2014-09-30 23:09:44 +00:00
################################################################################
2019-06-16 07:37:04 +00:00
# Set minimal C and C++ standards
2014-09-30 23:09:44 +00:00
################################################################################
if(NOT (CMAKE_VERSION VERSION_LESS "3.1"))
set(CMAKE_C_STANDARD 11)
set(CMAKE_CXX_STANDARD 14)
set(CMAKE_CXX_EXTENSIONS OFF)
else()
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,C>:-std=gnu11>")
set(CMAKE_C_STANDARD 11) # set variable just for reporting
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS "6.1.1")
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++11>")
set(CMAKE_CXX_STANDARD 11) # set variable just for reporting
else()
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++14>")
set(CMAKE_CXX_STANDARD 14) # set variable just for reporting
endif()
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
2019-06-16 07:37:04 +00:00
if(CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang")
if(CLANG_VERSION VERSION_LESS "600")
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++11>")
set(CMAKE_CXX_STANDARD 11)
else()
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++14>")
set(CMAKE_CXX_STANDARD 14)
endif()
else()
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS "3.5.0")
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++11>")
set(CMAKE_CXX_STANDARD 11)
else()
2019-02-24 18:17:32 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++14>")
set(CMAKE_CXX_STANDARD 14)
endif()
endif()
endif()
endif()
# Visibility
# See https://gcc.gnu.org/wiki/Visibility
2019-03-10 22:07:31 +00:00
if(POLICY CMP0063)
cmake_policy(SET CMP0063 NEW)
set(CMAKE_CXX_VISIBILITY_PRESET hidden)
set(CMAKE_C_VISIBILITY_PRESET hidden)
set(CMAKE_VISIBILITY_INLINES_HIDDEN 1)
else()
if((CMAKE_CXX_COMPILER_ID MATCHES "Clang" OR CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
add_definitions(-fvisibility=hidden)
2018-11-24 17:40:34 +00:00
endif()
endif()
2014-09-30 23:09:44 +00:00
2016-11-27 22:47:45 +00:00
2014-09-30 23:09:44 +00:00
################################################################################
# Check if the compiler defines the architecture as ARM
################################################################################
if(NOT (${CMAKE_SYSTEM_NAME} MATCHES "Darwin"))
2016-12-20 01:35:52 +00:00
if(CMAKE_CROSSCOMPILING)
set(IS_ARM TRUE)
2019-02-03 20:12:24 +00:00
if(NOT CMAKE_NO_SYSTEM_FROM_IMPORTED)
set(CMAKE_NO_SYSTEM_FROM_IMPORTED TRUE)
endif()
2018-11-24 17:40:34 +00:00
else()
2019-11-01 22:27:10 +00:00
if(NOT IS_ARM)
include(TestForARM)
endif()
2018-11-24 17:40:34 +00:00
endif()
else()
if(CMAKE_SYSTEM_PROCESSOR MATCHES "(^aarch64)|(arm64)")
set(IS_ARM TRUE)
endif()
2018-11-24 17:40:34 +00:00
endif()
2014-09-30 23:09:44 +00:00
################################################################################
# pkg-config - Helper tool used when compiling applications and libraries.
################################################################################
set(PKG_CONFIG_USE_CMAKE_PREFIX_PATH TRUE)
2020-05-14 21:17:09 +00:00
set(FPHSA_NAME_MISMATCHED ON)
find_package(PkgConfig)
2014-09-30 23:09:44 +00:00
2016-11-27 22:47:45 +00:00
2017-11-25 19:09:10 +00:00
################################################################################
2017-11-25 23:18:21 +00:00
# Find the POSIX thread (pthread) libraries
2017-11-25 19:09:10 +00:00
################################################################################
2017-11-25 23:18:21 +00:00
if(CMAKE_VERSION VERSION_LESS 3.1)
2019-02-07 14:21:47 +00:00
# Workaround for CMake < 3.1
2017-11-25 20:47:39 +00:00
find_package(Threads REQUIRED)
2019-02-07 14:21:47 +00:00
add_library(Threads::Threads SHARED IMPORTED)
set_property(TARGET Threads::Threads PROPERTY INTERFACE_LINK_LIBRARIES "${CMAKE_THREAD_LIBS_INIT}")
set_property(TARGET Threads::Threads PROPERTY IMPORTED_LINK_INTERFACE_LANGUAGES "CXX")
include(GNUInstallDirs)
# Fix bug in Debian 8.11
if(${LINUX_DISTRIBUTION} MATCHES "Debian")
if(${LINUX_VER} VERSION_LESS 8.12)
if(ARCH_64BITS)
set(FIX_PTHREADS_LOCATION "x86_64-linux-gnu/")
endif()
endif()
endif()
set_property(TARGET Threads::Threads PROPERTY IMPORTED_LOCATION /usr/${CMAKE_INSTALL_LIBDIR}/${FIX_PTHREADS_LOCATION}${CMAKE_FIND_LIBRARY_PREFIXES}pthread${CMAKE_SHARED_LIBRARY_SUFFIX})
2018-11-24 17:40:34 +00:00
else()
2017-11-25 23:18:21 +00:00
set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
if(CMAKE_CROSSCOMPILING)
set(THREADS_PREFER_PTHREAD_FLAG FALSE)
2018-11-24 17:40:34 +00:00
else()
2017-11-25 23:18:21 +00:00
set(THREADS_PREFER_PTHREAD_FLAG TRUE)
2018-11-24 17:40:34 +00:00
endif()
2017-11-25 23:18:21 +00:00
find_package(Threads REQUIRED)
2018-11-24 17:40:34 +00:00
endif()
2019-03-09 00:39:32 +00:00
set_package_properties(Threads PROPERTIES
URL "https://computing.llnl.gov/tutorials/pthreads/"
DESCRIPTION "Implements the POSIX Threads execution model"
PURPOSE "Used to implement parallelism."
TYPE REQUIRED
2019-03-09 00:39:32 +00:00
)
2016-11-27 22:47:45 +00:00
################################################################################
2015-08-24 11:17:48 +00:00
# Googletest - https://github.com/google/googletest
################################################################################
enable_testing()
if(ENABLE_UNIT_TESTING OR ENABLE_SYSTEM_TESTING)
2019-04-02 01:31:46 +00:00
if(NOT GTEST_DIR)
if(DEFINED ENV{GTEST_DIR})
set(GTEST_DIR $ENV{GTEST_DIR})
message(STATUS "Googletest root folder set at ${GTEST_DIR}")
2018-11-24 17:40:34 +00:00
endif()
endif()
endif()
2019-03-09 00:39:32 +00:00
find_package(GOOGLETEST)
set_package_properties(GOOGLETEST PROPERTIES
PURPOSE "Used for Unit and System Tests."
2019-03-09 00:39:32 +00:00
TYPE REQUIRED
)
if(NOT GOOGLETEST_FOUND)
2019-03-09 00:39:32 +00:00
set_package_properties(GOOGLETEST PROPERTIES
PURPOSE "Googletest v${GNSSSDR_GTEST_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-03-09 00:39:32 +00:00
)
endif()
################################################################################
# VOLK - Vector-Optimized Library of Kernels
################################################################################
find_package(VOLK)
if(NOT VOLK_FOUND)
message(FATAL_ERROR "*** VOLK is required to build gnss-sdr")
endif()
set_package_properties(VOLK PROPERTIES
PURPOSE "Provides an abstraction of optimized math routines targeting several SIMD processors."
TYPE REQUIRED
)
################################################################################
# GNU Radio - https://www.gnuradio.org
################################################################################
2019-04-27 15:28:49 +00:00
set(GR_REQUIRED_COMPONENTS RUNTIME PMT BLOCKS FFT FILTER ANALOG)
2019-03-09 00:39:32 +00:00
find_package(UHD)
set_package_properties(UHD PROPERTIES
PURPOSE "Used for communication with front-ends of the USRP family."
TYPE OPTIONAL
)
2019-03-09 00:39:32 +00:00
if(ENABLE_UHD)
if(NOT UHD_FOUND)
set(ENABLE_UHD OFF)
2018-11-24 17:40:34 +00:00
else()
2019-03-09 00:39:32 +00:00
set(GR_REQUIRED_COMPONENTS ${GR_REQUIRED_COMPONENTS} UHD)
endif()
endif()
2018-11-21 07:28:50 +00:00
find_package(GNURADIO)
set_package_properties(GNURADIO PROPERTIES
PURPOSE "Implements flowgraph scheduler, provides some processing blocks and classes to create new ones."
TYPE REQUIRED
)
2019-03-09 00:39:32 +00:00
2020-06-13 08:56:49 +00:00
if(NOT (GNURADIO_VERSION VERSION_LESS "3.8"))
set(GNURADIO_IS_38_OR_GREATER ON)
endif()
################################################################################
# Log4cpp - http://log4cpp.sourceforge.net/
################################################################################
if(GNURADIO_USES_LOG4CPP)
find_package(LOG4CPP)
set_package_properties(LOG4CPP PROPERTIES
PURPOSE "Required by GNU Radio."
TYPE REQUIRED
)
endif()
################################################################################
# spdlog - https://github.com/gabime/spdlog
################################################################################
if(GNURADIO_USES_SPDLOG)
find_package(SPDLOG REQUIRED)
set_package_properties(SPDLOG PROPERTIES
PURPOSE "Required by GNU Radio."
TYPE REQUIRED
)
endif()
################################################################################
# fmt - https://github.com/fmtlib/fmt
################################################################################
if(GNURADIO_USES_SPDLOG)
find_package(FMT REQUIRED)
set_package_properties(FMT PROPERTIES
PURPOSE "Required by GNU Radio."
TYPE REQUIRED
)
endif()
################################################################################
2019-06-16 07:37:04 +00:00
# Detect availability of std::filesystem and set C++ standard accordingly
################################################################################
set(FILESYSTEM_FOUND FALSE)
if(NOT ENABLE_OWN_GPSTK)
find_package(GPSTK)
set_package_properties(GPSTK PROPERTIES
PURPOSE "Used in some Extra Tests."
)
endif()
2021-11-23 17:53:56 +00:00
if(NOT (GNURADIO_VERSION VERSION_LESS 3.8) AND (LOG4CPP_READY_FOR_CXX17 OR GNURADIO_USES_SPDLOG))
# Check if we have std::filesystem
if(NOT (CMAKE_VERSION VERSION_LESS 3.8))
if(NOT GPSTK_FOUND OR NOT (GPSTK_FOUND AND GPSTK_OLDER_THAN_8)) # Fix for GPSTk < 8.0.0
find_package(FILESYSTEM COMPONENTS Final Experimental)
set_package_properties(FILESYSTEM PROPERTIES
URL "https://en.cppreference.com/w/cpp/filesystem"
DESCRIPTION "Provides facilities for performing operations on file systems and their components"
PURPOSE "Work with paths, regular files, and directories."
TYPE OPTIONAL
)
endif()
if(FILESYSTEM_FOUND)
2021-04-26 07:33:36 +00:00
set(CMAKE_CXX_STANDARD 17)
# if(CMAKE_VERSION VERSION_GREATER 3.13)
2021-10-28 23:36:55 +00:00
# UHD 3.15.0.0-5 does not support C++20
# GNU Radio 3.10.0.git does not support C++20
# if(((NOT UHD_FOUND) OR (UHD_FOUND AND ("${UHD_VERSION}" VERSION_LESS 3.14.99))) AND (GNURADIO_VERSION VERSION_LESS 3.9.99))
# set(CMAKE_CXX_STANDARD 20)
# if(CMAKE_VERSION VERSION_GREATER 3.20.99)
# if(((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "11.0.0")) OR
# ((CMAKE_CXX_COMPILER_ID STREQUAL "Clang") AND NOT (CMAKE_CXX_COMPILER_VERSION VERSION_LESS "12.0")))
# set(CMAKE_CXX_STANDARD 23)
# endif()
# endif()
# endif()
# endif()
2019-10-30 10:50:02 +00:00
set(CMAKE_CXX_STANDARD_REQUIRED ON)
2018-11-24 17:40:34 +00:00
endif()
endif()
endif()
if((NOT PMT_USES_BOOST_ANY) AND (CMAKE_CXX_STANDARD VERSION_LESS 17))
message(FATAL_ERROR "GNU Radio v${GNURADIO_VERSION} requires C++17. Please update your environment.")
endif()
################################################################################
# Boost - https://www.boost.org
################################################################################
if(UNIX AND EXISTS "/usr/lib64")
list(APPEND BOOST_LIBRARYDIR "/usr/lib64") # Fedora 64-bit fix
2018-11-24 17:40:34 +00:00
endif()
# Boost_ADDITIONAL_VERSIONS is only used internally by cmake to know the
# formation of newer versions. No need to increase, not used anymore since newer
# Boost provides its own CMake configuration files.
set(Boost_ADDITIONAL_VERSIONS
"1.53.0" "1.53" "1.54.0" "1.54"
"1.55.0" "1.55" "1.56.0" "1.56" "1.57.0" "1.57" "1.58.0" "1.58" "1.59.0" "1.59"
"1.60.0" "1.60" "1.61.0" "1.61" "1.62.0" "1.62" "1.63.0" "1.63" "1.64.0" "1.64"
"1.65.0" "1.65" "1.66.0" "1.66" "1.67.0" "1.67" "1.68.0" "1.68" "1.69.0" "1.69"
"1.70.0" "1.70" "1.71.0" "1.71"
)
set(Boost_USE_MULTITHREAD ON)
set(BOOST_COMPONENTS atomic chrono date_time serialization system thread)
if(NOT ${FILESYSTEM_FOUND})
set(BOOST_COMPONENTS ${BOOST_COMPONENTS} filesystem)
endif()
find_package(Boost ${GNSSSDR_BOOST_MIN_VERSION} COMPONENTS ${BOOST_COMPONENTS} REQUIRED)
if(NOT Boost_FOUND)
2018-11-19 07:51:05 +00:00
message(FATAL_ERROR "Fatal error: Boost (version >=${GNSSSDR_BOOST_MIN_VERSION}) required.")
2018-11-24 17:40:34 +00:00
endif()
set_package_properties(Boost PROPERTIES
URL "https://www.boost.org"
PURPOSE "Used widely across the source code."
TYPE REQUIRED
)
if(CMAKE_VERSION VERSION_LESS 3.14)
set(Boost_VERSION_STRING "${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
endif()
if(POLICY CMP0093)
cmake_policy(SET CMP0093 NEW) # FindBoost reports Boost_VERSION in x.y.z format.
endif()
set_package_properties(Boost PROPERTIES
DESCRIPTION "Portable C++ source libraries (found: v${Boost_VERSION_STRING})"
)
2016-11-27 22:47:45 +00:00
# Define targets if CMake < 3.5
if(CMAKE_VERSION VERSION_LESS 3.5)
if(NOT TARGET Boost::date_time)
add_library(Boost::date_time SHARED IMPORTED)
set_target_properties(Boost::date_time PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_DATE_TIME_LIBRARIES}
IMPORTED_LOCATION ${Boost_DATE_TIME_LIBRARIES}
)
2018-11-24 17:40:34 +00:00
endif()
if(NOT TARGET Boost::system)
add_library(Boost::system SHARED IMPORTED)
set_target_properties(Boost::system PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_SYSTEM_LIBRARIES}
IMPORTED_LOCATION ${Boost_SYSTEM_LIBRARIES}
)
endif()
if(NOT TARGET Boost::thread)
add_library(Boost::thread SHARED IMPORTED)
set_target_properties(Boost::thread PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_THREAD_LIBRARIES}
IMPORTED_LOCATION ${Boost_THREAD_LIBRARIES}
)
endif()
if(NOT TARGET Boost::serialization)
add_library(Boost::serialization SHARED IMPORTED)
set_target_properties(Boost::serialization PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_SERIALIZATION_LIBRARIES}
IMPORTED_LOCATION ${Boost_SERIALIZATION_LIBRARIES}
)
endif()
if(NOT TARGET Boost::chrono)
add_library(Boost::chrono SHARED IMPORTED)
set_target_properties(Boost::chrono PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_CHRONO_LIBRARIES}
IMPORTED_LOCATION ${Boost_CHRONO_LIBRARIES}
)
endif()
if(NOT TARGET Boost::atomic)
add_library(Boost::atomic SHARED IMPORTED)
set_target_properties(Boost::atomic PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_ATOMIC_LIBRARIES}
IMPORTED_LOCATION ${Boost_ATOMIC_LIBRARIES}
)
endif()
if(NOT ${FILESYSTEM_FOUND})
if(NOT TARGET Boost::filesystem)
add_library(Boost::filesystem SHARED IMPORTED)
set_target_properties(Boost::filesystem PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
INTERFACE_LINK_LIBRARIES ${Boost_FILESYSTEM_LIBRARIES}
IMPORTED_LOCATION ${Boost_FILESYSTEM_LIBRARIES}
)
endif()
2018-11-24 17:40:34 +00:00
endif()
endif()
# Define Boost::headers target if CMake < 3.15
if(CMAKE_VERSION VERSION_LESS 3.15)
if(NOT TARGET Boost::headers)
2019-09-07 11:35:43 +00:00
if(CMAKE_VERSION VERSION_LESS 3.0)
2019-09-07 12:21:15 +00:00
add_library(Boost::headers SHARED IMPORTED) # Trick for CMake 2.8.12
set_target_properties(Boost::headers PROPERTIES
2019-09-07 11:35:43 +00:00
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
IMPORTED_LOCATION ${Boost_DATE_TIME_LIBRARIES}
)
else()
add_library(Boost::headers INTERFACE IMPORTED)
2019-09-07 11:39:48 +00:00
set_target_properties(Boost::headers PROPERTIES
INTERFACE_INCLUDE_DIRECTORIES ${Boost_INCLUDE_DIR}
2019-09-07 11:35:43 +00:00
)
endif()
endif()
endif()
# Provide package descriptions if Boost >= 1.71.00
if(Boost_VERSION_STRING VERSION_GREATER 1.70.99)
set_package_properties(boost_headers PROPERTIES
URL "https://www.boost.org/"
DESCRIPTION "Header files of Boost libraries"
PURPOSE "Used widely across the source code."
TYPE REQUIRED
)
set_package_properties(boost_atomic PROPERTIES
URL "https://www.boost.org/doc/libs/release/doc/html/atomic.html"
DESCRIPTION "Provides atomic data types and operations on those types"
PURPOSE "Required by Boost Thread."
TYPE REQUIRED
)
set_package_properties(boost_chrono PROPERTIES
URL "https://www.boost.org/doc/libs/release/doc/html/chrono.html"
DESCRIPTION "Useful time utilities"
PURPOSE "Required by Boost Thread."
TYPE REQUIRED
)
set_package_properties(boost_date_time PROPERTIES
URL "https://www.boost.org/doc/libs/release/doc/html/date_time.html"
DESCRIPTION "A set of date-time libraries"
PURPOSE "Required by Boost Thread."
TYPE REQUIRED
)
set_package_properties(boost_serialization PROPERTIES
URL "https://www.boost.org/doc/libs/release/libs/serialization/doc/index.html"
DESCRIPTION "Reversible deconstruction of C++ data structures to sequences of bytes"
PURPOSE "Used for serializing data."
TYPE REQUIRED
)
set_package_properties(boost_system PROPERTIES
URL "https://www.boost.org/doc/libs/release/libs/system/doc/html/system.html"
DESCRIPTION "Extensible error reporting library"
PURPOSE "Used for error reporting."
TYPE REQUIRED
)
set_package_properties(boost_thread PROPERTIES
URL "https://www.boost.org/doc/libs/release/doc/html/thread.html"
DESCRIPTION "Portable C++ multi-threading"
PURPOSE "Used by GNU Radio multi-threading system."
TYPE REQUIRED
)
if(NOT ${FILESYSTEM_FOUND})
set_package_properties(boost_filesystem PROPERTIES
URL "https://www.boost.org/doc/libs/release/libs/filesystem/doc/index.htm"
DESCRIPTION "Portable facilities to manipulate paths and files"
PURPOSE "Used for output file handling."
TYPE REQUIRED
)
endif()
endif()
if(Boost_VERSION_STRING VERSION_LESS 1.58.0)
set(USE_OLD_BOOST_MATH_COMMON_FACTOR ON)
endif()
if(Boost_VERSION_STRING VERSION_GREATER 1.65.99)
set(USE_BOOST_ASIO_IO_CONTEXT ON)
endif()
if(Boost_VERSION_STRING VERSION_LESS 1.73)
# Disable concepts to address https://github.com/boostorg/asio/issues/312
if(((CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 9.9) OR
CMAKE_CXX_COMPILER_ID MATCHES "Clang") AND (CMAKE_VERSION VERSION_GREATER 3.11))
target_compile_definitions(Boost::headers
INTERFACE
-DBOOST_ASIO_DISABLE_CONCEPTS
)
endif()
endif()
# Workaround for https://github.com/boostorg/format/issues/67
2020-06-06 18:07:00 +00:00
if((Boost_VERSION_STRING VERSION_GREATER 1.71) AND (Boost_VERSION_STRING VERSION_LESS 1.73))
if(CMAKE_CXX_STANDARD VERSION_GREATER 17)
set(CMAKE_CXX_STANDARD 17)
endif()
endif()
# Fix for Boost Asio < 1.70 when using Clang in macOS
if(Boost_VERSION_STRING VERSION_LESS 1.70.0)
# Check if we have std::string_view
unset(has_string_view CACHE)
include(CheckCXXSourceCompiles)
check_cxx_source_compiles("
#include <string_view>
int main()
{ std::string_view sv; }"
has_string_view
)
endif()
# Fox for CentOS 7 with cmake3 and gcc8
if(Boost_VERSION_STRING VERSION_LESS "1.60")
2020-08-19 15:24:43 +00:00
set(USE_GENERIC_LAMBDAS OFF)
endif()
# Fix for Boost >= 1.73
if(Boost_VERSION_STRING VERSION_GREATER 1.72.99)
set(USE_BOOST_BIND_PLACEHOLDERS ON)
endif()
################################################################################
# Detect availability of std::span
################################################################################
unset(has_span CACHE)
2020-06-16 11:07:13 +00:00
include(CheckCXXSourceCompiles)
check_cxx_source_compiles("
#include <span>
int main()
{ std::span<float> s; }"
has_span
)
################################################################################
# Detect availability of std::rotl
################################################################################
unset(has_rotl CACHE)
if(CMAKE_CXX_STANDARD VERSION_GREATER 17)
check_cxx_source_compiles("
#include <bit>
#include <cstdint>
int main()
{
std::uint8_t i = 0b00011101;
auto k = std::rotl(i,0);
}"
has_rotl
)
endif()
################################################################################
# Detect availability of std::put_time (Workaround for gcc < 5.0)
################################################################################
check_cxx_source_compiles("
#include <iomanip>
int main()
{ std::put_time(nullptr, \"\"); }"
has_put_time
)
2020-06-30 11:41:20 +00:00
################################################################################
# Detect availability of std::plus without class specifier
################################################################################
unset(has_std_plus_void CACHE)
if(CMAKE_CXX_STANDARD VERSION_GREATER 11)
include(CheckCXXSourceCompiles)
check_cxx_source_compiles("
2020-07-02 05:08:53 +00:00
#include <functional>
2020-06-30 11:41:20 +00:00
int main()
{ [](float a=1, float b=0){return std::plus<>();}; };"
has_std_plus_void
)
endif()
2020-07-01 21:05:33 +00:00
################################################################################
# Detect availability of std::transform_reduce
################################################################################
unset(has_transform_reduce CACHE)
unset(has_transform_reduce_with_execution_policy CACHE)
if(CMAKE_CXX_STANDARD VERSION_GREATER 14)
include(CheckCXXSourceCompiles)
check_cxx_source_compiles("
2020-07-01 21:28:00 +00:00
#include <functional>
2020-07-01 21:05:33 +00:00
#include <numeric>
#include <vector>
int main()
{
std::vector<float> a(5);
std::vector<float> b(5);
auto c = std::transform_reduce(cbegin(a), cend(a), cbegin(b), 0, std::plus<>{}, std::multiplies<>{}); };"
has_transform_reduce
)
check_cxx_source_compiles("
#include <execution>
2020-07-01 21:28:00 +00:00
#include <functional>
2020-07-01 21:05:33 +00:00
#include <numeric>
#include <vector>
int main()
{
std::vector<float> a(5);
std::vector<float> b(5);
auto c = std::transform_reduce(std::execution::par, cbegin(a), cend(a), cbegin(b), 0, std::plus<>{}, std::multiplies<>{}); };"
has_transform_reduce_with_execution_policy
)
endif()
################################################################################
2014-11-07 17:23:59 +00:00
# volk_gnsssdr module - GNSS-SDR's own VOLK library
################################################################################
2018-11-21 07:28:50 +00:00
find_package(VOLKGNSSSDR)
set_package_properties(VOLKGNSSSDR PROPERTIES
PURPOSE "Accelerates math routines targeting several SIMD processors."
TYPE REQUIRED
)
2018-11-21 07:28:50 +00:00
if(NOT VOLKGNSSSDR_FOUND)
2019-03-09 00:39:32 +00:00
message(STATUS " volk_gnsssdr will be built along with gnss-sdr when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'.")
2016-12-25 19:40:29 +00:00
###############################
# Find Python required modules
###############################
include(SetupPython) # sets PYTHON_EXECUTABLE and search for required modules
2016-12-25 19:40:29 +00:00
if(NOT PYTHON_MIN_VER_FOUND)
message(FATAL_ERROR "Python ${GNSSSDR_PYTHON_MIN_VERSION} or greater required to build VOLK_GNSSSDR")
2016-12-25 19:40:29 +00:00
endif()
if(${PYTHON3})
set(PYTHON_NAME "python3")
2018-11-24 17:40:34 +00:00
else()
set(PYTHON_NAME "python")
2018-11-24 17:40:34 +00:00
endif()
2016-12-25 19:40:29 +00:00
# Mako
if(NOT MAKO_FOUND)
2020-02-05 09:20:32 +00:00
message(STATUS "Mako template library not found. See https://www.makotemplates.org/")
message(STATUS " You can try to install it by typing:")
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(STATUS " sudo yum install ${PYTHON_NAME}-mako")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(STATUS " sudo zypper install ${PYTHON_NAME}-Mako")
else()
message(STATUS " sudo apt-get install ${PYTHON_NAME}-mako")
endif()
2018-11-24 17:40:34 +00:00
endif()
2016-12-25 19:40:29 +00:00
message(FATAL_ERROR "Mako templates required to build VOLK_GNSSSDR")
2018-11-24 17:40:34 +00:00
endif()
2016-12-26 11:42:20 +00:00
if(PYTHON_NAME STREQUAL "python")
# Six
if(NOT SIX_FOUND)
message(STATUS "python-six not found. See https://pythonhosted.org/six/")
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
message(STATUS " You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(STATUS " sudo yum install ${PYTHON_NAME}-six")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(STATUS " sudo zypper install ${PYTHON_NAME}-six")
else()
message(STATUS " sudo apt-get install ${PYTHON_NAME}-six")
endif()
endif()
message(FATAL_ERROR "six - python 2 and 3 compatibility library required to build VOLK_GNSSSDR")
2018-11-24 17:40:34 +00:00
endif()
endif()
2019-06-19 10:46:15 +00:00
if(CMAKE_VERSION VERSION_GREATER 3.12)
2019-06-19 09:59:41 +00:00
set_package_properties(Python3 PROPERTIES
URL "https://www.python.org/"
PURPOSE "Required to build volk_gnsssdr."
TYPE REQUIRED
)
2019-06-19 10:46:15 +00:00
if(Python3_FOUND)
set_package_properties(Python3 PROPERTIES
2019-06-26 19:07:59 +00:00
DESCRIPTION "An interpreted, high-level, general-purpose programming language (found: v${Python3_VERSION})"
2019-06-19 10:46:15 +00:00
)
else()
set_package_properties(Python3 PROPERTIES
DESCRIPTION "An interpreted, high-level, general-purpose programming language"
PURPOSE "Another Python version will be used."
)
endif()
if(Python2_FOUND)
set_package_properties(Python2 PROPERTIES
URL "https://www.python.org/"
2019-06-26 19:07:59 +00:00
DESCRIPTION "An interpreted, high-level, general-purpose programming language (found: v${Python2_VERSION})"
2019-06-19 10:46:15 +00:00
PURPOSE "Required to build volk_gnsssdr."
TYPE REQUIRED
)
endif()
endif()
2019-03-09 18:45:24 +00:00
if(PYTHONINTERP_FOUND)
set_package_properties(PythonInterp PROPERTIES
URL "https://www.python.org/"
2019-06-26 19:07:59 +00:00
DESCRIPTION "An interpreted, high-level, general-purpose programming language (found: v${PYTHON_VERSION_STRING})"
PURPOSE "Required to build volk_gnsssdr."
TYPE REQUIRED
)
endif()
2016-12-26 11:42:20 +00:00
set(STRIP_VOLK_GNSSSDR_PROFILE "")
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
set(STRIP_VOLK_GNSSSDR_PROFILE "-DENABLE_STRIP=${ENABLE_STRIP}")
if(ENABLE_PACKAGING)
set(STRIP_VOLK_GNSSSDR_PROFILE "${STRIP_VOLK_GNSSSDR_PROFILE} -DCMAKE_VERBOSE_MAKEFILE=ON")
2018-11-24 17:40:34 +00:00
endif()
endif()
2016-12-26 11:42:20 +00:00
set(VOLK_GNSSSDR_BUILD_COMMAND "${CMAKE_MAKE_PROGRAM}")
2016-12-25 19:40:29 +00:00
if(PYTHON_EXECUTABLE)
set(USE_THIS_PYTHON "-DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}")
2018-11-24 17:40:34 +00:00
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
2016-12-25 19:40:29 +00:00
if(CMAKE_GENERATOR STREQUAL Xcode)
2020-01-19 23:35:00 +00:00
set(VOLK_GNSSSDR_BUILD_COMMAND "xcodebuild"
"-configuration" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>
"-target"
)
2018-11-24 17:40:34 +00:00
endif()
endif()
2016-12-26 11:42:20 +00:00
if(CMAKE_TOOLCHAIN_FILE)
2020-01-13 01:08:50 +00:00
set(VOLK_GNSSSDR_COMPILER "")
else()
set(VOLK_GNSSSDR_COMPILER -DCMAKE_C_COMPILER=${CMAKE_C_COMPILER} -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER})
endif()
if(ENABLE_ORC)
find_package(ORC)
set_package_properties(ORC PROPERTIES
PURPOSE "Used by volk_gnsssdr."
TYPE OPTIONAL
)
if(ORC_FOUND)
set(ORC_ENABLED ON)
else()
set(ORC_ENABLED OFF)
set(ENABLE_ORC OFF)
endif()
2019-11-17 12:42:29 +00:00
else()
set(ORC_ENABLED OFF)
set(ENABLE_ORC OFF)
2019-11-17 12:42:29 +00:00
endif()
2016-12-20 01:35:52 +00:00
set(VOLK_GNSSSDR_CMAKE_ARGS ${VOLK_GNSSSDR_COMPILER}
-DCMAKE_INSTALL_PREFIX=${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install
2018-11-19 07:51:05 +00:00
-DENABLE_STATIC_LIBS=ON
-DENABLE_OWN_CPUFEATURES=${ENABLE_OWN_CPUFEATURES}
2018-11-19 07:51:05 +00:00
-DENABLE_PROFILING=${ENABLE_PROFILING}
2019-11-17 12:42:29 +00:00
-DENABLE_ORC=${ORC_ENABLED}
2018-11-19 07:51:05 +00:00
${STRIP_VOLK_GNSSSDR_PROFILE}
${USE_THIS_PYTHON}
)
if(CMAKE_VERSION VERSION_GREATER 3.18.99 AND CMAKE_GENERATOR STREQUAL Xcode)
if(XCODE_VERSION VERSION_GREATER 11)
set(VOLK_GNSSSDR_CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS} -T buildsystem=1)
endif()
endif()
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{OECORE_TARGET_SYSROOT})
2017-04-06 19:16:44 +00:00
set(VOLK_GNSSSDR_CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
-DCROSSCOMPILE_MULTILIB=TRUE
-DBOOST_ROOT=$ENV{OECORE_TARGET_SYSROOT}/usr
)
if(NOT CMAKE_TOOLCHAIN_FILE)
set(VOLK_GNSSSDR_CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
-DCMAKE_TOOLCHAIN_FILE=${CMAKE_SOURCE_DIR}/cmake/Toolchains/oe-sdk_cross.cmake
)
else()
set(VOLK_GNSSSDR_CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
-DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}
)
endif()
2019-11-01 18:29:28 +00:00
else()
if(CMAKE_TOOLCHAIN_FILE)
2020-01-13 01:08:50 +00:00
set(VOLK_GNSSSDR_CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
2019-11-01 18:29:28 +00:00
-DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}
)
endif()
2018-11-24 17:40:34 +00:00
endif()
if(CMAKE_SYSTEM_PROCESSOR MATCHES "^cortex")
set(CMAKE_SYSTEM_PROCESSOR arm-${CMAKE_SYSTEM_PROCESSOR})
endif()
include(GNUInstallDirs)
set(SUPPORTED_CPU_FEATURES_ARCH FALSE)
if(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
2020-12-02 15:19:56 +00:00
set(SUPPORTED_CPU_FEATURES_ARCH TRUE)
elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
2020-12-02 15:19:56 +00:00
set(SUPPORTED_CPU_FEATURES_ARCH TRUE)
elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^aarch64")
2020-12-02 15:19:56 +00:00
set(SUPPORTED_CPU_FEATURES_ARCH TRUE)
elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "(x86_64)|(AMD64|amd64)|(^i.86$)")
2020-12-02 15:19:56 +00:00
set(SUPPORTED_CPU_FEATURES_ARCH TRUE)
elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
2020-12-02 15:19:56 +00:00
set(SUPPORTED_CPU_FEATURES_ARCH TRUE)
endif()
2020-11-30 20:13:58 +00:00
if(${CMAKE_INSTALL_LIBDIR} MATCHES lib64)
set(VOLK_GNSSSDR_LIB_SUFFIX 64)
endif()
if(CMAKE_VERSION VERSION_LESS 3.2)
2018-11-24 17:40:34 +00:00
ExternalProject_Add(volk_gnsssdr_module
PREFIX ${CMAKE_BINARY_DIR}/volk_gnsssdr_module
SOURCE_DIR ${CMAKE_SOURCE_DIR}/src/algorithms/libs/volk_gnsssdr_module/volk_gnsssdr
BINARY_DIR ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/build
2020-01-19 23:35:00 +00:00
CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:None>:None>$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:NoOptWithASM>$<$<CONFIG:Coverage>:Coverage>$<$<CONFIG:O2WithASM>:O2WithASM>$<$<CONFIG:O3WithASM>:O3WithASM>$<$<CONFIG:ASAN>:ASAN>
2020-11-30 18:42:15 +00:00
-DCMAKE_INSTALL_LIBDIR=${CMAKE_INSTALL_LIBDIR}
2018-11-24 17:40:34 +00:00
DOWNLOAD_COMMAND ""
UPDATE_COMMAND ""
PATCH_COMMAND ""
2019-08-03 18:15:49 +00:00
BUILD_COMMAND ${VOLK_GNSSSDR_BUILD_COMMAND} volk_gnsssdr_profile
INSTALL_DIR ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install
2018-11-19 07:51:05 +00:00
)
2018-11-24 17:40:34 +00:00
else()
if(SUPPORTED_CPU_FEATURES_ARCH)
set(VOLK_GNSSSDR_BUILD_BYPRODUCTS
${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/lib${VOLK_GNSSSDR_LIB_SUFFIX}/${CMAKE_FIND_LIBRARY_PREFIXES}volk_gnsssdr${CMAKE_STATIC_LIBRARY_SUFFIX}
${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/bin/volk_gnsssdr_profile
)
if(NOT ENABLE_OWN_CPUFEATURES)
find_package(CpuFeatures QUIET)
set_package_properties(CpuFeatures PROPERTIES
URL "https://github.com/google/cpu_features"
PURPOSE "Used by the volk_gnsssdr library."
TYPE REQUIRED
)
endif()
if(CpuFeatures_FOUND)
message(STATUS "Found CpuFeatures: (found version ${CpuFeatures_VERSION})")
set_package_properties(CpuFeatures PROPERTIES
DESCRIPTION "A cross platform C99 library to get CPU features at runtime (found: v${CpuFeatures_VERSION})"
)
else()
set_package_properties(CpuFeatures PROPERTIES
DESCRIPTION "A cross platform C99 library to get CPU features at runtime"
PURPOSE "CpuFeatures will be built when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
)
set(VOLK_GNSSSDR_BUILD_BYPRODUCTS
${VOLK_GNSSSDR_BUILD_BYPRODUCTS}
${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/${CMAKE_INSTALL_LIBDIR}/${CMAKE_FIND_LIBRARY_PREFIXES}cpu_features${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
ExternalProject_Add(volk_gnsssdr_module
PREFIX ${CMAKE_BINARY_DIR}/volk_gnsssdr_module
SOURCE_DIR ${CMAKE_SOURCE_DIR}/src/algorithms/libs/volk_gnsssdr_module/volk_gnsssdr
BINARY_DIR ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/build
CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:None>:None>$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:NoOptWithASM>$<$<CONFIG:Coverage>:Coverage>$<$<CONFIG:O2WithASM>:O2WithASM>$<$<CONFIG:O3WithASM>:O3WithASM>$<$<CONFIG:ASAN>:ASAN>
2020-11-30 18:42:15 +00:00
-DCMAKE_INSTALL_LIBDIR=${CMAKE_INSTALL_LIBDIR}
DOWNLOAD_COMMAND ""
UPDATE_COMMAND ""
PATCH_COMMAND ""
BUILD_COMMAND ${VOLK_GNSSSDR_BUILD_COMMAND} volk_gnsssdr_profile
BUILD_BYPRODUCTS ${VOLK_GNSSSDR_BUILD_BYPRODUCTS}
INSTALL_DIR ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install
)
else()
ExternalProject_Add(volk_gnsssdr_module
PREFIX ${CMAKE_BINARY_DIR}/volk_gnsssdr_module
SOURCE_DIR ${CMAKE_SOURCE_DIR}/src/algorithms/libs/volk_gnsssdr_module/volk_gnsssdr
BINARY_DIR ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/build
CMAKE_ARGS ${VOLK_GNSSSDR_CMAKE_ARGS}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:None>:None>$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:NoOptWithASM>$<$<CONFIG:Coverage>:Coverage>$<$<CONFIG:O2WithASM>:O2WithASM>$<$<CONFIG:O3WithASM>:O3WithASM>$<$<CONFIG:ASAN>:ASAN>
2020-11-30 18:42:15 +00:00
-DCMAKE_INSTALL_LIBDIR=${CMAKE_INSTALL_LIBDIR}
DOWNLOAD_COMMAND ""
UPDATE_COMMAND ""
PATCH_COMMAND ""
BUILD_COMMAND ${VOLK_GNSSSDR_BUILD_COMMAND} volk_gnsssdr_profile
2020-11-30 20:13:58 +00:00
BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/lib${VOLK_GNSSSDR_LIB_SUFFIX}/${CMAKE_FIND_LIBRARY_PREFIXES}volk_gnsssdr${CMAKE_STATIC_LIBRARY_SUFFIX}
${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/bin/volk_gnsssdr_profile
INSTALL_DIR ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install
)
endif()
2018-11-24 17:40:34 +00:00
endif()
2020-12-02 15:19:56 +00:00
if(NOT ORC_LIBRARIES_STATIC)
set(ORC_LIBRARIES_STATIC "")
2018-11-19 07:51:05 +00:00
set(ORC_INCLUDE_DIRS "")
2018-11-24 17:40:34 +00:00
endif()
2015-03-20 16:02:41 +00:00
2014-11-07 20:44:44 +00:00
add_library(volk_gnsssdr UNKNOWN IMPORTED)
2020-11-30 20:13:58 +00:00
set_property(TARGET volk_gnsssdr PROPERTY IMPORTED_LOCATION ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/lib${VOLK_GNSSSDR_LIB_SUFFIX}/libvolk_gnsssdr${CMAKE_STATIC_LIBRARY_SUFFIX})
set(VOLK_GNSSSDR_INCLUDE_DIRS "${CMAKE_BINARY_DIR}/volk_gnsssdr_module/build/include/;${CMAKE_SOURCE_DIR}/src/algorithms/libs/volk_gnsssdr_module/volk_gnsssdr/include;${ORC_INCLUDE_DIRS}")
2020-12-02 15:19:56 +00:00
set(VOLK_GNSSSDR_LIBRARIES volk_gnsssdr ${ORC_LIBRARIES_STATIC})
if(CpuFeatures_FOUND)
set(VOLK_GNSSSDR_LIBRARIES ${VOLK_GNSSSDR_LIBRARIES} CpuFeatures::cpu_features)
endif()
2014-11-07 17:23:59 +00:00
2019-02-03 18:24:44 +00:00
if(NOT TARGET Volkgnsssdr::volkgnsssdr)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/build/include)
2019-02-03 18:24:44 +00:00
add_library(Volkgnsssdr::volkgnsssdr STATIC IMPORTED)
add_dependencies(Volkgnsssdr::volkgnsssdr volk_gnsssdr_module)
set_target_properties(Volkgnsssdr::volkgnsssdr PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
2020-11-30 20:13:58 +00:00
IMPORTED_LOCATION "${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/lib${VOLK_GNSSSDR_LIB_SUFFIX}/libvolk_gnsssdr${CMAKE_STATIC_LIBRARY_SUFFIX}"
2019-02-03 18:24:44 +00:00
INCLUDE_DIRECTORIES "${VOLK_GNSSSDR_INCLUDE_DIRS}"
INTERFACE_INCLUDE_DIRECTORIES "${VOLK_GNSSSDR_INCLUDE_DIRS}"
INTERFACE_LINK_LIBRARIES "${VOLK_GNSSSDR_LIBRARIES}"
)
if(CMAKE_VERSION VERSION_GREATER 3.0 AND SUPPORTED_CPU_FEATURES_ARCH)
if(NOT CpuFeatures_FOUND)
set_target_properties(Volkgnsssdr::volkgnsssdr PROPERTIES
INTERFACE_LINK_LIBRARIES ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/${CMAKE_INSTALL_LIBDIR}/${CMAKE_FIND_LIBRARY_PREFIXES}cpu_features${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
2020-08-21 14:31:57 +00:00
endif()
2019-02-03 18:24:44 +00:00
endif()
2017-06-22 18:59:45 +00:00
if(CMAKE_VERSION VERSION_LESS 3.2)
2018-11-24 17:40:34 +00:00
add_custom_command(TARGET volk_gnsssdr_module POST_BUILD
COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/bin/volk_gnsssdr_profile
${LOCAL_INSTALL_BASE_DIR}/install/volk_gnsssdr_profile
)
2018-11-24 17:40:34 +00:00
else()
add_custom_command(TARGET volk_gnsssdr_module POST_BUILD
COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/bin/volk_gnsssdr_profile
${LOCAL_INSTALL_BASE_DIR}/install/volk_gnsssdr_profile
BYPRODUCTS ${LOCAL_INSTALL_BASE_DIR}/install/volk_gnsssdr_profile
)
2018-11-24 17:40:34 +00:00
endif()
2017-07-13 15:28:08 +00:00
add_custom_command(TARGET volk_gnsssdr_module POST_BUILD
COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_BINARY_DIR}/volk_gnsssdr_module/install/bin/volk_gnsssdr-config-info
${LOCAL_INSTALL_BASE_DIR}/install/volk_gnsssdr-config-info
2019-03-09 00:39:32 +00:00
)
2019-03-09 00:39:32 +00:00
set_package_properties(VOLKGNSSSDR PROPERTIES
PURPOSE "volk_gnsssdr will be built when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-03-09 00:39:32 +00:00
)
else()
set(ENABLE_OWN_CPUFEATURES OFF)
set(ENABLE_ORC OFF)
2018-11-24 17:40:34 +00:00
endif()
2014-09-07 23:56:09 +00:00
2016-11-27 22:47:45 +00:00
################################################################################
2015-03-24 18:53:10 +00:00
# gflags - https://github.com/gflags/gflags
################################################################################
2019-09-08 11:56:20 +00:00
set(LOCAL_GFLAGS FALSE)
if(NOT ENABLE_OWN_GLOG)
find_package(GLOG)
if(GLOG_FOUND)
find_package(GFLAGS)
endif()
endif()
set_package_properties(GFLAGS PROPERTIES
PURPOSE "Used for commandline flags management."
TYPE REQUIRED
)
2018-11-21 07:28:50 +00:00
if(NOT GFLAGS_FOUND)
set(ENABLE_OWN_GLOG ON)
if(GFLAGS_VERSION)
message(STATUS " A version of the gflags library equal or higher than v${GNSSSDR_GFLAGS_MIN_VERSION} has not been found.")
else()
message(STATUS " The gflags library has not been found.")
endif()
message(STATUS " gflags v${GNSSSDR_GFLAGS_LOCAL_VERSION} will be downloaded, built, and statically linked automatically")
message(STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'.")
2020-01-19 23:35:00 +00:00
set(GFLAGS_BUILD_COMMAND ${CMAKE_COMMAND}
"--build" "${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}"
2020-01-19 23:35:00 +00:00
"--config" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
)
if(CMAKE_GENERATOR STREQUAL Xcode)
set(GFLAGS_BUILD_COMMAND "xcodebuild" "-configuration" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>)
2019-11-28 11:29:04 +00:00
endif()
if(CMAKE_TOOLCHAIN_FILE)
set(GFLAGS_TOOLCHAIN_FILE -DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE})
2019-11-28 14:20:57 +00:00
endif()
2018-11-19 07:51:05 +00:00
if(CMAKE_VERSION VERSION_LESS 3.2)
2018-11-24 17:40:34 +00:00
ExternalProject_Add(gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
GIT_REPOSITORY https://github.com/gflags/gflags.git
2018-11-24 17:40:34 +00:00
GIT_TAG v${GNSSSDR_GFLAGS_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/gflags/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS -DBUILD_SHARED_LIBS=OFF
-DBUILD_STATIC_LIBS=ON
-DBUILD_gflags_LIB=ON
-DBUILD_gflags_nothreads_LIB=ON
2020-01-19 23:35:00 +00:00
-DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
${GFLAGS_TOOLCHAIN_FILE}
-DGFLAGS_NAMESPACE=google
2020-01-19 23:35:00 +00:00
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
BUILD_COMMAND ${GFLAGS_BUILD_COMMAND}
2018-11-24 17:40:34 +00:00
UPDATE_COMMAND ""
PATCH_COMMAND ""
INSTALL_COMMAND ""
)
else()
set(GFLAGS_BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${CMAKE_STATIC_LIBRARY_SUFFIX})
if((CMAKE_BUILD_TYPE STREQUAL Debug) OR (CMAKE_BUILD_TYPE STREQUAL NoOptWithASM) OR
(CMAKE_BUILD_TYPE STREQUAL Coverage) OR (CMAKE_BUILD_TYPE STREQUAL ASAN)) # Workaround for Ninja generator
set(GFLAGS_BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags_debug${CMAKE_STATIC_LIBRARY_SUFFIX})
endif()
2019-12-06 13:36:53 +00:00
if((CMAKE_VERSION VERSION_GREATER 3.12.0) AND NOT (CMAKE_GENERATOR STREQUAL Xcode))
set(PARALLEL_BUILD "--parallel 2")
endif()
2018-11-24 17:40:34 +00:00
ExternalProject_Add(gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
GIT_REPOSITORY https://github.com/gflags/gflags.git
2019-11-28 14:29:27 +00:00
GIT_TAG v${GNSSSDR_GFLAGS_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/gflags/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS -DBUILD_SHARED_LIBS=OFF
-DBUILD_STATIC_LIBS=ON
-DBUILD_gflags_LIB=ON
-DBUILD_gflags_nothreads_LIB=ON
-DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
${GFLAGS_TOOLCHAIN_FILE}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
2020-06-21 19:59:05 +00:00
BUILD_COMMAND "${GFLAGS_BUILD_COMMAND} ${PARALLEL_BUILD}"
BUILD_BYPRODUCTS ${GFLAGS_BUILD_BYPRODUCTS}
2018-11-24 17:40:34 +00:00
UPDATE_COMMAND ""
PATCH_COMMAND ""
INSTALL_COMMAND ""
)
endif()
2019-11-28 14:20:57 +00:00
# Note: -DBUILD_gflags_nothreads_LIB=ON is required as a workaround to a bug in gflags 2.2.2. This is fixed in gflags master branch
2018-11-19 07:51:05 +00:00
set(GFlags_INCLUDE_DIRS
${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/include CACHE PATH "Local Gflags headers"
2018-11-19 07:51:05 +00:00
)
2019-11-28 14:20:57 +00:00
if(CMAKE_VERSION VERSION_LESS "3.0.2")
set(GFlags_LIBS
${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${CMAKE_STATIC_LIBRARY_SUFFIX}
2019-11-28 11:29:04 +00:00
)
endif()
2019-02-03 18:24:44 +00:00
if(NOT TARGET Gflags::gflags)
file(MAKE_DIRECTORY ${GFlags_INCLUDE_DIRS})
2019-02-03 18:24:44 +00:00
add_library(Gflags::gflags STATIC IMPORTED)
add_dependencies(Gflags::gflags gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION})
set_target_properties(Gflags::gflags PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_CONFIGURATIONS "None;Debug;Release;RelWithDebInfo;MinSizeRel"
MAP_IMPORTED_CONFIG_NOOPTWITHASM Debug
MAP_IMPORTED_CONFIG_COVERAGE Debug
MAP_IMPORTED_CONFIG_O2WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_O3WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_ASAN Debug
IMPORTED_LOCATION_NONE ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_DEBUG ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags_debug${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELEASE ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELWITHDEBINFO ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_MINSIZEREL ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${CMAKE_STATIC_LIBRARY_SUFFIX}
INTERFACE_INCLUDE_DIRECTORIES ${GFlags_INCLUDE_DIRS}
INTERFACE_LINK_LIBRARIES ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}gflags$<$<CONFIG:Debug>:_debug>${CMAKE_STATIC_LIBRARY_SUFFIX}
2019-02-03 18:24:44 +00:00
)
if((CMAKE_GENERATOR STREQUAL Xcode) OR MSVC)
if(MSVC)
set(MSVC_POSTFIX _static)
endif()
set_target_properties(Gflags::gflags PROPERTIES
IMPORTED_LOCATION_DEBUG ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/Debug/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${MSVC_POSTFIX}_debug${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELEASE ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/Release/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${MSVC_POSTFIX}${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELWITHDEBINFO ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/RelWithDebInfo/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${MSVC_POSTFIX}${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_MINSIZEREL ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/MinSizeRel/${CMAKE_FIND_LIBRARY_PREFIXES}gflags${MSVC_POSTFIX}${CMAKE_STATIC_LIBRARY_SUFFIX}
INTERFACE_LINK_LIBRARIES ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib/$<$<CONFIG:Debug>:Debug/>$<$<CONFIG:Release>:Release/>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo/>$<$<CONFIG:MinSizeRel>:MinSizeRel/>${CMAKE_FIND_LIBRARY_PREFIXES}gflags${MSVC_POSTFIX}$<$<CONFIG:Debug>:_debug>${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
2019-02-03 18:24:44 +00:00
endif()
2019-11-28 11:29:04 +00:00
if(MSVC)
target_link_libraries(Gflags::gflags INTERFACE shlwapi.lib)
endif()
set(LOCAL_GFLAGS TRUE CACHE STRING "GFlags downloaded, built, and statically linked automatically" FORCE)
2019-03-09 00:39:32 +00:00
set_package_properties(GFLAGS PROPERTIES
PURPOSE "Gflags v${GNSSSDR_GFLAGS_LOCAL_VERSION} and Glog v${GNSSSDR_GLOG_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-03-09 00:39:32 +00:00
)
if(CMAKE_VERSION VERSION_LESS 3.2)
set_property(TARGET Gflags::gflags APPEND PROPERTY
INTERFACE_COMPILE_DEFINITIONS GFLAGS_OLD_NAMESPACE=1
)
endif()
2018-11-24 17:40:34 +00:00
endif()
2016-11-27 22:47:45 +00:00
################################################################################
2015-03-24 20:44:03 +00:00
# glog - https://github.com/google/glog
################################################################################
set_package_properties(GLOG PROPERTIES
PURPOSE "Used for runtime internal logging."
TYPE REQUIRED
)
2018-11-19 07:51:05 +00:00
if(NOT GLOG_FOUND OR ${LOCAL_GFLAGS})
message(STATUS " glog library has not been found")
2018-11-21 07:28:50 +00:00
if(NOT GFLAGS_FOUND)
2018-11-19 07:51:05 +00:00
message(STATUS " or it is likely not linked to gflags.")
2018-11-24 17:40:34 +00:00
endif()
message(STATUS " glog v${GNSSSDR_GLOG_LOCAL_VERSION} will be downloaded, built, and statically linked automatically")
message(STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'.")
2018-11-19 07:51:05 +00:00
if(NOT ${LOCAL_GFLAGS})
if(NOT TARGET gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION})
add_library(gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION} UNKNOWN IMPORTED)
endif()
2018-11-19 07:51:05 +00:00
set_property(TARGET gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION} PROPERTY IMPORTED_LOCATION "${GFlags_LIBS}")
string(REPLACE /include "" GFLAGS_PREFIX_PATH ${GFlags_INCLUDE_DIRS})
else()
set(GFLAGS_PREFIX_PATH ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION})
2018-11-24 17:40:34 +00:00
endif()
2018-11-19 07:51:05 +00:00
set(TARGET_GFLAGS gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION})
2020-01-19 23:35:00 +00:00
set(GLOG_MAKE_PROGRAM ${CMAKE_COMMAND}
"--build" "${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}"
2020-01-19 23:35:00 +00:00
"--config" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
)
if(CMAKE_GENERATOR STREQUAL Xcode)
2020-01-19 23:35:00 +00:00
set(GLOG_MAKE_PROGRAM "xcodebuild" "-configuration"
$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>
)
2019-11-28 11:29:04 +00:00
endif()
if(CMAKE_TOOLCHAIN_FILE)
set(GLOG_TOOLCHAIN_FILE -DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE})
endif()
if(CMAKE_VERSION VERSION_LESS 3.3)
2019-11-10 18:45:55 +00:00
if(CMAKE_VERSION VERSION_LESS 3.0)
2019-12-06 18:12:36 +00:00
set(GLOG_MAKE_PROGRAM ${CMAKE_MAKE_PROGRAM})
set(GFLAGS_LIBRARIES_TO_LINK ${GFlags_LIBS})
2019-11-10 18:45:55 +00:00
if(${LOCAL_GFLAGS})
set(GFLAGS_LIBRARY_DIR_TO_LINK ${CMAKE_BINARY_DIR}/gflags-${GNSSSDR_GFLAGS_LOCAL_VERSION}/lib)
2019-11-10 18:45:55 +00:00
else()
set(GFLAGS_LIBRARY_DIR_TO_LINK ${GFlags_LIBRARY_DIRS})
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
2019-11-10 18:45:55 +00:00
set(GFLAGS_LIBRARIES_TO_LINK "${GFLAGS_LIBRARIES_TO_LINK} -lc++")
set(GLOG_EXPORT_CXX_LIBRARIES "export CXXFLAGS=\"-stdlib=libc++\"")
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
set(GLOG_EXPORT_C_COMPILER "export CC=clang")
set(GLOG_EXPORT_CXX_COMPILER "export CXX=clang++")
endif()
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
set(GLOG_EXPORT_C_COMPILER "export CC=gcc")
set(GLOG_EXPORT_CXX_COMPILER "export CXX=g++")
endif()
file(WRITE ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/tmp/configure_with_gflags
2019-11-10 18:45:55 +00:00
"#!/bin/sh
export CPPFLAGS=-I${GFlags_INCLUDE_DIRS}
export LDFLAGS=-L${GFLAGS_LIBRARY_DIR_TO_LINK}
export LIBS=\"${GFLAGS_LIBRARIES_TO_LINK}\"
${GLOG_EXPORT_CXX_LIBRARIES}
${GLOG_EXPORT_C_COMPILER}
${GLOG_EXPORT_CXX_COMPILER}
cd ${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/
2019-11-10 18:45:55 +00:00
aclocal
automake --add-missing
autoreconf -vfi
cd ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/configure --enable-shared=no"
2019-11-10 18:45:55 +00:00
)
file(COPY ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/tmp/configure_with_gflags
DESTINATION ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2019-11-10 18:45:55 +00:00
FILE_PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ
GROUP_EXECUTE WORLD_READ WORLD_EXECUTE
)
set(GLOG_CONFIGURE ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/configure_with_gflags)
2019-11-10 18:45:55 +00:00
# Ensure that aclocal and libtool are present
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
2019-11-10 18:45:55 +00:00
if(EXISTS "/usr/bin/libtoolize")
if(EXISTS "/usr/bin/aclocal" OR
EXISTS "/usr/bin/aclocal-1.16" OR
EXISTS "/usr/bin/aclocal-1.15" OR
EXISTS "/usr/bin/aclocal-1.14" OR
EXISTS "/usr/bin/aclocal-1.13" OR
EXISTS "/usr/bin/aclocal-1.11" OR
EXISTS "/usr/bin/aclocal-1.10")
# Everything ok, we can move on
else()
message(" aclocal has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum groupinstall 'Development Tools'")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install automake")
else()
message(" sudo apt-get install automake")
endif()
message(FATAL_ERROR "aclocal is required to build glog from source")
endif()
else()
message(" libtool has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum groupinstall 'Development Tools'")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install libtoool")
else()
message(" sudo apt-get install libtool")
endif()
message(FATAL_ERROR "libtool is required to build glog from source")
endif()
endif()
if(GLOG_MAKE_PROGRAM MATCHES "ninja")
find_program(GLOG_MAKE_EXECUTABLE make
PATHS
/usr/bin
/usr/local/bin
)
if(NOT GLOG_MAKE_EXECUTABLE)
message(FATAL_ERROR "make is required to build Glog from source.")
endif()
set(GLOG_MAKE_PROGRAM ${GLOG_MAKE_EXECUTABLE})
endif()
ExternalProject_Add(glog-${GNSSSDR_GLOG_LOCAL_VERSION}
DEPENDS ${TARGET_GFLAGS}
PREFIX ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2019-11-10 18:45:55 +00:00
GIT_REPOSITORY https://github.com/google/glog/
GIT_TAG v${GNSSSDR_GLOG_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2019-11-10 18:45:55 +00:00
CONFIGURE_COMMAND ${GLOG_CONFIGURE} --prefix=<INSTALL_DIR>
BUILD_COMMAND "${GLOG_MAKE_PROGRAM}"
UPDATE_COMMAND ""
PATCH_COMMAND ""
INSTALL_COMMAND ""
)
set(GLOG_LIBRARIES
${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/.libs/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
2019-11-10 18:45:55 +00:00
)
2019-12-06 18:24:42 +00:00
set(GLOG_INCLUDE_DIRS
${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/src
${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/src
2019-12-06 18:24:42 +00:00
)
else() # CMake > 3.0 but < 3.3
2019-11-10 18:45:55 +00:00
ExternalProject_Add(glog-${GNSSSDR_GLOG_LOCAL_VERSION}
DEPENDS ${TARGET_GFLAGS}
PREFIX ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2019-11-10 18:45:55 +00:00
GIT_REPOSITORY https://github.com/google/glog/
GIT_TAG v${GNSSSDR_GLOG_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
-DCMAKE_C_COMPILER=${CMAKE_C_COMPILER}
-DCMAKE_PREFIX_PATH=${GFLAGS_PREFIX_PATH}
${GLOG_TOOLCHAIN_FILE}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
BUILD_COMMAND ${GLOG_MAKE_PROGRAM}
2019-11-10 18:45:55 +00:00
UPDATE_COMMAND ""
PATCH_COMMAND ""
INSTALL_COMMAND ""
)
2019-12-06 18:24:42 +00:00
set(GLOG_INCLUDE_DIRS
${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/src
${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2019-12-06 18:24:42 +00:00
${GFlags_INCLUDE_DIRS}
)
2019-11-10 18:45:55 +00:00
endif()
else() # CMake > 3.3
set(GLOG_BUILD_BYPRODUCTS
${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
)
if((CMAKE_BUILD_TYPE STREQUAL Debug) OR (CMAKE_BUILD_TYPE STREQUAL NoOptWithASM) OR
(CMAKE_BUILD_TYPE STREQUAL Coverage) OR (CMAKE_BUILD_TYPE STREQUAL ASAN)) # Workaround for Ninja generator
set(GLOG_BUILD_BYPRODUCTS
${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glogd${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
2019-12-06 13:36:53 +00:00
if((CMAKE_VERSION VERSION_GREATER 3.12.0) AND NOT (CMAKE_GENERATOR STREQUAL Xcode))
set(PARALLEL_BUILD "--parallel 2")
endif()
2018-11-24 17:40:34 +00:00
ExternalProject_Add(glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2018-11-19 07:51:05 +00:00
DEPENDS ${TARGET_GFLAGS}
PREFIX ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2018-11-19 07:51:05 +00:00
GIT_REPOSITORY https://github.com/google/glog/
GIT_TAG v${GNSSSDR_GLOG_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
-DCMAKE_PREFIX_PATH=${GFLAGS_PREFIX_PATH}
${GLOG_TOOLCHAIN_FILE}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
-DBUILD_SHARED_LIBS=OFF
-DBUILD_TESTING=OFF
2020-06-21 19:59:05 +00:00
BUILD_COMMAND "${GLOG_MAKE_PROGRAM} ${PARALLEL_BUILD}"
BUILD_BYPRODUCTS ${GLOG_BUILD_BYPRODUCTS}
2018-11-19 07:51:05 +00:00
UPDATE_COMMAND ""
PATCH_COMMAND ""
INSTALL_COMMAND ""
)
2019-12-06 18:24:42 +00:00
set(GLOG_INCLUDE_DIRS
${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/src
${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}
2019-12-06 18:24:42 +00:00
${GFlags_INCLUDE_DIRS}
)
2018-11-24 17:40:34 +00:00
endif()
2018-11-19 07:51:05 +00:00
add_dependencies(glog-${GNSSSDR_GLOG_LOCAL_VERSION} Gflags::gflags)
2019-02-03 18:24:44 +00:00
# Create Glog::glog target
if(NOT TARGET Glog::glog)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/thirdparty/glog/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/src)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION})
2019-02-03 18:24:44 +00:00
add_library(Glog::glog STATIC IMPORTED)
add_dependencies(Glog::glog glog-${GNSSSDR_GLOG_LOCAL_VERSION})
if(CMAKE_VERSION VERSION_LESS 3.0)
set_target_properties(Glog::glog PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION "${GLOG_LIBRARIES}"
INCLUDE_DIRECTORIES "${GLOG_INCLUDE_DIRS}"
INTERFACE_INCLUDE_DIRECTORIES "${GLOG_INCLUDE_DIRS}"
INTERFACE_LINK_LIBRARIES "${GLOG_LIBRARIES}"
)
else()
set_target_properties(Glog::glog PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_CONFIGURATIONS "None;Debug;Release;RelWithDebInfo;MinSizeRel"
MAP_IMPORTED_CONFIG_NOOPTWITHASM Debug
MAP_IMPORTED_CONFIG_COVERAGE Debug
MAP_IMPORTED_CONFIG_O2WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_O3WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_ASAN Debug
IMPORTED_LOCATION_NONE ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_DEBUG ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glogd${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELEASE ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELWITHDEBINFO ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_MINSIZEREL ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
INTERFACE_INCLUDE_DIRECTORIES "${GLOG_INCLUDE_DIRS}"
INTERFACE_LINK_LIBRARIES ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}glog$<$<CONFIG:Debug>:d>${CMAKE_STATIC_LIBRARY_SUFFIX}
)
if((CMAKE_GENERATOR STREQUAL Xcode) OR MSVC)
set_target_properties(Glog::glog PROPERTIES
IMPORTED_LOCATION_DEBUG ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/Debug/${CMAKE_FIND_LIBRARY_PREFIXES}glogd${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELEASE ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/Release/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELWITHDEBINFO ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/RelWithDebInfo/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_MINSIZEREL ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/MinSizeRel/${CMAKE_FIND_LIBRARY_PREFIXES}glog${CMAKE_STATIC_LIBRARY_SUFFIX}
INTERFACE_LINK_LIBRARIES ${CMAKE_BINARY_DIR}/glog-${GNSSSDR_GLOG_LOCAL_VERSION}/$<$<CONFIG:Debug>:Debug/>$<$<CONFIG:Release>:Release/>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo/>$<$<CONFIG:MinSizeRel>:MinSizeRel/>${CMAKE_FIND_LIBRARY_PREFIXES}glog$<$<CONFIG:Debug>:d>${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
endif()
2019-02-03 18:24:44 +00:00
endif()
set(LOCAL_GLOG TRUE CACHE STRING "Glog downloaded, built, and statically linked automatically" FORCE)
2019-03-09 00:39:32 +00:00
set_package_properties(GLOG PROPERTIES
PURPOSE "Glog v${GNSSSDR_GLOG_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-03-09 00:39:32 +00:00
)
2018-11-24 17:40:34 +00:00
endif()
2015-05-23 09:20:26 +00:00
if(NOT ENABLE_LOG)
message(STATUS "Internal logging is not enabled")
if(CMAKE_VERSION VERSION_GREATER 3.11.0)
target_compile_definitions(Glog::glog INTERFACE -DGOOGLE_STRIP_LOG=1)
else()
set_property(TARGET Glog::glog APPEND PROPERTY
INTERFACE_COMPILE_DEFINITIONS GOOGLE_STRIP_LOG=1
)
endif()
2018-11-24 17:40:34 +00:00
endif()
2015-05-23 09:20:26 +00:00
2019-12-06 20:28:16 +00:00
################################################################################
# Check that BLAS (Basic Linear Algebra Subprograms) is found in the system
# See https://www.netlib.org/blas/
################################################################################
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
# Avoid using the implementation that comes with the Accelerate framework
include(AvoidAccelerate)
else()
if(NOT BLA_VENDOR)
set(BLA_VENDOR "Generic")
endif()
find_package(BLAS)
set_package_properties(BLAS PROPERTIES
URL "https://www.netlib.org/blas/"
DESCRIPTION "Basic Linear Algebra Subprograms"
PURPOSE "Used for matrix algebra computations."
TYPE REQUIRED
)
endif()
if(NOT BLAS_FOUND)
message(" The BLAS library has not been found.")
message(" You can try to install it by typing:")
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
message(" 'sudo port install lapack' if you are using Macports, or")
message(" 'brew install lapack' if you are using Homebrew.")
2018-11-24 17:40:34 +00:00
else()
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum install blas-devel")
else()
message(" sudo apt-get install libblas-dev")
endif()
2018-11-24 17:40:34 +00:00
endif()
message(FATAL_ERROR "BLAS is required to build gnss-sdr")
2018-11-24 17:40:34 +00:00
endif()
if(NOT TARGET BLAS::BLAS)
add_library(BLAS::BLAS SHARED IMPORTED)
set_target_properties(BLAS::BLAS PROPERTIES
IMPORTED_LOCATION ${BLAS_LIBRARIES}
INTERFACE_LINK_LIBRARIES ${BLAS_LIBRARIES}
)
endif()
################################################################################
# Check that LAPACK (Linear Algebra PACKage) is found in the system
# See https://www.netlib.org/lapack/
################################################################################
if(NOT (${CMAKE_SYSTEM_NAME} MATCHES "Darwin"))
find_package(LAPACK)
set_package_properties(LAPACK PROPERTIES
URL "https://www.netlib.org/lapack/"
DESCRIPTION "Linear Algebra PACKage"
PURPOSE "Used for matrix algebra computations."
TYPE REQUIRED
)
endif()
if(NOT LAPACK_FOUND)
message(" The LAPACK library has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum install lapack-devel")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install lapack-devel")
2018-11-24 17:40:34 +00:00
else()
message(" sudo apt-get install liblapack-dev")
2018-11-24 17:40:34 +00:00
endif()
message(FATAL_ERROR "LAPACK is required to build gnss-sdr")
2018-11-24 17:40:34 +00:00
endif()
if(NOT TARGET LAPACK::LAPACK)
add_library(LAPACK::LAPACK SHARED IMPORTED)
2020-06-13 12:09:20 +00:00
set_target_properties(LAPACK::LAPACK PROPERTIES
IMPORTED_LOCATION ${LAPACK_LIBRARIES}
INTERFACE_LINK_LIBRARIES ${LAPACK_LIBRARIES}
)
endif()
2017-11-25 19:09:10 +00:00
2017-11-25 19:09:10 +00:00
################################################################################
# Armadillo - http://arma.sourceforge.net/
################################################################################
find_package(Armadillo)
set_package_properties(Armadillo PROPERTIES
URL "http://arma.sourceforge.net/"
PURPOSE "Used for matrix computations."
TYPE REQUIRED
)
if(ARMADILLO_FOUND)
set_package_properties(Armadillo PROPERTIES
DESCRIPTION "C++ library for linear algebra and scientific computing (found: v${ARMADILLO_VERSION_STRING})"
)
if(${ARMADILLO_VERSION_STRING} VERSION_LESS ${GNSSSDR_ARMADILLO_MIN_VERSION})
2019-09-08 11:56:20 +00:00
set(ARMADILLO_FOUND FALSE)
set(ENABLE_OWN_ARMADILLO ON)
message(STATUS " Armadillo >= v${GNSSSDR_ARMADILLO_MIN_VERSION} has not been found.")
2019-02-03 18:24:44 +00:00
else()
2019-09-08 11:56:20 +00:00
if(NOT ENABLE_OWN_ARMADILLO)
add_library(Armadillo::armadillo SHARED IMPORTED)
set_target_properties(Armadillo::armadillo PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION "${ARMADILLO_LIBRARIES}"
INTERFACE_INCLUDE_DIRECTORIES "${ARMADILLO_INCLUDE_DIRS}"
INTERFACE_LINK_LIBRARIES "${ARMADILLO_LIBRARIES}"
)
endif()
2018-11-24 17:40:34 +00:00
endif()
2019-09-08 11:56:20 +00:00
else()
message(STATUS " Armadillo has not been found.")
2018-11-24 17:40:34 +00:00
endif()
2017-02-03 11:04:15 +00:00
if(NOT ARMADILLO_FOUND OR ENABLE_OWN_ARMADILLO)
message(STATUS " Armadillo ${GNSSSDR_ARMADILLO_LOCAL_VERSION} will be downloaded, built, and statically linked automatically")
2019-03-09 00:39:32 +00:00
message(STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'.")
2018-11-19 07:51:05 +00:00
set(armadillo_BRANCH ${GNSSSDR_ARMADILLO_LOCAL_VERSION})
set(armadillo_RELEASE ${armadillo_BRANCH})
#############################################
# Check if GFORTRAN is found in the system
#############################################
if(NOT (${CMAKE_SYSTEM_NAME} MATCHES "Darwin") AND NOT MSVC)
2018-11-19 07:51:05 +00:00
find_package(GFORTRAN)
set_package_properties(GFORTRAN PROPERTIES
PURPOSE "Required by Armadillo."
TYPE REQUIRED
)
2018-11-19 07:51:05 +00:00
if(NOT GFORTRAN)
message(STATUS "The gfortran library has not been found.")
message(STATUS " You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
2018-11-24 17:40:34 +00:00
message(STATUS " sudo yum install gcc-fortran")
2018-11-19 07:51:05 +00:00
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
2018-11-24 17:40:34 +00:00
message(STATUS " sudo zypper install gcc-fortran")
else()
message(STATUS " sudo apt-get install gfortran")
endif()
2018-11-19 07:51:05 +00:00
message(FATAL_ERROR "gfortran is required to build gnss-sdr")
2018-11-24 17:40:34 +00:00
endif()
endif()
2018-11-19 07:51:05 +00:00
#############################################
# Download and build Armadillo
#############################################
2020-01-19 23:35:00 +00:00
set(ARMADILLO_BUILD_COMMAND ${CMAKE_COMMAND}
"--build" "${CMAKE_BINARY_DIR}/armadillo-${armadillo_RELEASE}"
2020-01-19 23:35:00 +00:00
"--config" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
)
if(CMAKE_TOOLCHAIN_FILE)
set(ARMADILLO_TOOLCHAIN_FILE -DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE})
else()
set(ARMADILLO_TOOLCHAIN_FILE "")
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin" AND ENABLE_OWN_ARMADILLO)
set(DARWIN_DISABLE_HDF5 -DDETECT_HDF5=false)
else()
set(DARWIN_DISABLE_HDF5 "")
endif()
2020-04-22 12:44:53 +00:00
set(ARMADILLO_CXX_VERSION "")
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_LESS 4.8.3)
set(ARMADILLO_CXX_VERSION -DCMAKE_CXX_FLAGS=-std=c++11)
endif()
2018-11-19 07:51:05 +00:00
if(CMAKE_VERSION VERSION_LESS 3.2)
2018-11-24 17:40:34 +00:00
ExternalProject_Add(armadillo-${armadillo_RELEASE}
PREFIX ${CMAKE_BINARY_DIR}/armadillo-${armadillo_RELEASE}
2018-11-19 07:51:05 +00:00
GIT_REPOSITORY https://gitlab.com/conradsnicta/armadillo-code.git
GIT_TAG ${armadillo_BRANCH}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/armadillo/armadillo-${armadillo_RELEASE}
BINARY_DIR ${CMAKE_BINARY_DIR}/armadillo-${armadillo_RELEASE}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
-DBUILD_SHARED_LIBS=OFF
2020-04-22 12:44:53 +00:00
${ARMADILLO_CXX_VERSION}
${DARWIN_DISABLE_HDF5}
2020-01-19 23:35:00 +00:00
${ARMADILLO_TOOLCHAIN_FILE}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
BUILD_COMMAND ${ARMADILLO_BUILD_COMMAND}
2018-11-19 07:51:05 +00:00
UPDATE_COMMAND ""
INSTALL_COMMAND ""
)
2018-11-24 17:40:34 +00:00
else()
if(CMAKE_VERSION VERSION_GREATER 3.12.0)
set(PARALLEL_BUILD "--parallel 2")
endif()
2018-11-24 17:40:34 +00:00
ExternalProject_Add(armadillo-${armadillo_RELEASE}
PREFIX ${CMAKE_BINARY_DIR}/armadillo-${armadillo_RELEASE}
2018-11-19 07:51:05 +00:00
GIT_REPOSITORY https://gitlab.com/conradsnicta/armadillo-code.git
GIT_TAG ${armadillo_BRANCH}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/armadillo/armadillo-${armadillo_RELEASE}
BINARY_DIR ${CMAKE_BINARY_DIR}/armadillo-${armadillo_RELEASE}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
-DBUILD_SHARED_LIBS=OFF
2020-04-22 12:44:53 +00:00
${ARMADILLO_CXX_VERSION}
${DARWIN_DISABLE_HDF5}
2020-01-19 23:35:00 +00:00
${ARMADILLO_TOOLCHAIN_FILE}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
2020-06-21 19:59:05 +00:00
BUILD_COMMAND "${ARMADILLO_BUILD_COMMAND} ${PARALLEL_BUILD}"
BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/armadillo-${armadillo_RELEASE}/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}
2018-11-19 07:51:05 +00:00
UPDATE_COMMAND ""
INSTALL_COMMAND ""
)
2018-11-24 17:40:34 +00:00
endif()
2018-11-19 07:51:05 +00:00
# Create imported target
2018-11-19 07:51:05 +00:00
ExternalProject_Get_Property(armadillo-${armadillo_RELEASE} binary_dir)
if(NOT GFORTRAN)
set(GFORTRAN "")
2018-11-24 17:40:34 +00:00
endif()
set(ARMADILLO_STATIC_LIBRARY ${binary_dir}/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX})
set(LOCAL_ARMADILLO TRUE CACHE STRING "Armadillo downloaded, built, and statically linked automatically" FORCE)
2018-11-19 07:51:05 +00:00
set(ARMADILLO_VERSION_STRING ${armadillo_RELEASE})
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/thirdparty/armadillo/armadillo-${armadillo_RELEASE}/include)
2019-02-03 18:24:44 +00:00
add_library(Armadillo::armadillo STATIC IMPORTED)
add_dependencies(Armadillo::armadillo armadillo-${armadillo_RELEASE})
set_target_properties(Armadillo::armadillo PROPERTIES
2019-04-02 00:41:20 +00:00
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_CONFIGURATIONS "None;Debug;Release;RelWithDebInfo;MinSizeRel"
MAP_IMPORTED_CONFIG_NOOPTWITHASM Debug
MAP_IMPORTED_CONFIG_COVERAGE Debug
MAP_IMPORTED_CONFIG_O2WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_O3WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_ASAN Debug
IMPORTED_LOCATION_NONE ${ARMADILLO_STATIC_LIBRARY}
IMPORTED_LOCATION_DEBUG ${ARMADILLO_STATIC_LIBRARY}
IMPORTED_LOCATION_RELEASE ${ARMADILLO_STATIC_LIBRARY}
IMPORTED_LOCATION_RELWITHDEBINFO ${ARMADILLO_STATIC_LIBRARY}
IMPORTED_LOCATION_MINSIZEREL ${ARMADILLO_STATIC_LIBRARY}
INTERFACE_INCLUDE_DIRECTORIES ${CMAKE_BINARY_DIR}/thirdparty/armadillo/armadillo-${armadillo_RELEASE}/include
INTERFACE_LINK_LIBRARIES ${BLAS_LIBRARIES} ${LAPACK_LIBRARIES} ${GFORTRAN} ${ARMADILLO_STATIC_LIBRARY}
2019-02-03 18:24:44 +00:00
)
if((CMAKE_GENERATOR STREQUAL Xcode) OR MSVC)
set_target_properties(Armadillo::armadillo PROPERTIES
IMPORTED_LOCATION_DEBUG ${binary_dir}/Debug/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELEASE ${binary_dir}/Release/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELWITHDEBINFO ${binary_dir}/RelWithDebInfo/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_MINSIZEREL ${binary_dir}/MinSizeRel/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}
INTERFACE_LINK_LIBRARIES ${BLAS_LIBRARIES} ${LAPACK_LIBRARIES} ${GFORTRAN} ${binary_dir}/${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}/$<$<CONFIG:Debug>:Debug/>$<$<CONFIG:Release>:Release/>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo/>$<$<CONFIG:MinSizeRel>:MinSizeRel/>${CMAKE_FIND_LIBRARY_PREFIXES}armadillo${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
2019-03-09 00:39:32 +00:00
set_package_properties(Armadillo PROPERTIES
DESCRIPTION "C++ library for linear algebra and scientific computing"
PURPOSE "Armadillo ${GNSSSDR_ARMADILLO_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-03-09 00:39:32 +00:00
)
2018-11-24 17:40:34 +00:00
endif()
################################################################################
# GnuTLS - https://www.gnutls.org/
################################################################################
find_package(GnuTLS)
set_package_properties(GnuTLS PROPERTIES
URL "https://www.gnutls.org/"
PURPOSE "Used for the SUPL protocol implementation."
TYPE REQUIRED
)
if(GnuTLS_FOUND AND GNUTLS_VERSION_STRING)
set_package_properties(GnuTLS PROPERTIES
DESCRIPTION "Transport Layer Security Library (found: v${GNUTLS_VERSION_STRING})"
)
else()
set_package_properties(GnuTLS PROPERTIES
DESCRIPTION "Transport Layer Security Library"
)
endif()
2019-09-30 12:58:34 +00:00
find_library(GNUTLS_OPENSSL_LIBRARY
NAMES gnutls-openssl libgnutls-openssl.so.27
PATHS
/usr/lib
2018-11-24 17:40:34 +00:00
/usr/lib64
/usr/lib/x86_64-linux-gnu
/usr/lib/aarch64-linux-gnu
/usr/lib/arm-linux-gnueabihf
/usr/lib/arm-linux-gnueabi
/usr/lib/i386-linux-gnu
/usr/lib/alpha-linux-gnu
/usr/lib/hppa-linux-gnu
/usr/lib/i386-gnu
/usr/lib/i686-gnu
/usr/lib/i686-linux-gnu
/usr/lib/x86_64-kfreebsd-gnu
/usr/lib/i686-kfreebsd-gnu
/usr/lib/m68k-linux-gnu
/usr/lib/mips-linux-gnu
/usr/lib/mips64el-linux-gnuabi64
/usr/lib/mipsel-linux-gnu
/usr/lib/powerpc-linux-gnu
/usr/lib/powerpc-linux-gnuspe
/usr/lib/powerpc64-linux-gnu
/usr/lib/powerpc64le-linux-gnu
/usr/lib/s390x-linux-gnu
/usr/lib/riscv64-linux-gnu
2018-11-24 17:40:34 +00:00
/usr/lib/sparc64-linux-gnu
/usr/lib/x86_64-linux-gnux32
/usr/lib/sh4-linux-gnu
2019-09-30 12:58:34 +00:00
/usr/local/lib
/usr/local/lib64
/opt/local/lib
2018-11-24 17:40:34 +00:00
)
if(NOT GNUTLS_OPENSSL_LIBRARY)
if(GnuTLS_FOUND)
message(STATUS " But it was not built with openssl compatibility.")
endif()
message(STATUS " Looking for OpenSSL instead...")
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
set(OPENSSL_ROOT_DIR /usr/local/opt/openssl) # Trick for Homebrew
endif()
2018-11-19 07:51:05 +00:00
find_package(OpenSSL)
set_package_properties(OpenSSL PROPERTIES
URL "https://www.openssl.org"
DESCRIPTION "Cryptography and SSL/TLS Toolkit (found: v${OPENSSL_VERSION})"
PURPOSE "Used for the SUPL protocol implementation."
TYPE REQUIRED
)
2018-11-19 07:51:05 +00:00
if(OPENSSL_FOUND)
set_package_properties(GnuTLS PROPERTIES
PURPOSE "Not found, but OpenSSL can replace it."
)
set(GNUTLS_INCLUDE_DIR ${OPENSSL_INCLUDE_DIR})
set(GNUTLS_LIBRARIES "")
set(GNUTLS_OPENSSL_LIBRARY ${OPENSSL_SSL_LIBRARY})
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
message(" The GnuTLS library with openssl compatibility enabled has not been found.")
message(" You can try to install the required libraries by typing:")
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum install openssl-devel")
2018-11-24 17:40:34 +00:00
else()
message(" sudo apt-get install libgnutls28-dev")
2018-11-24 17:40:34 +00:00
endif()
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
message(" 'sudo port install gnutls', if you are using Macports, or")
message(" 'brew install openssl', if you are using Homebrew.")
2018-11-24 17:40:34 +00:00
endif()
2018-11-19 07:51:05 +00:00
message(FATAL_ERROR "GnuTLS libraries with openssl compatibility are required to build gnss-sdr")
2018-11-24 17:40:34 +00:00
endif()
endif()
2016-11-27 22:47:45 +00:00
################################################################################
# Matio - https://github.com/tbeu/matio
################################################################################
find_package(MATIO)
set_package_properties(MATIO PROPERTIES
PURPOSE "Used to store processing block's results in MAT files readable from MATLAB/Octave."
TYPE REQUIRED
)
2018-02-24 17:01:10 +00:00
if(NOT MATIO_FOUND OR MATIO_VERSION_STRING VERSION_LESS ${GNSSSDR_MATIO_MIN_VERSION})
if(MATIO_FOUND)
2018-11-19 07:51:05 +00:00
message(STATUS " Matio installed version (${MATIO_VERSION_STRING}) is too old (>= ${GNSSSDR_MATIO_MIN_VERSION} is required).")
2018-11-24 17:40:34 +00:00
endif()
message(STATUS " Matio v${GNSSSDR_MATIO_LOCAL_VERSION} will be downloaded, built, and statically linked automatically")
2019-03-09 00:39:32 +00:00
message(STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'.")
set_package_properties(MATIO PROPERTIES
PURPOSE "Matio v${GNSSSDR_MATIO_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
)
# Find ZLIB library https://github.com/madler/zlib
find_package(ZLIB)
2019-03-09 00:39:32 +00:00
set_package_properties(ZLIB PROPERTIES
URL "https://www.zlib.net/"
PURPOSE "Required to build Matio."
TYPE REQUIRED
)
if(ZLIB_FOUND AND ZLIB_VERSION_STRING)
set_package_properties(ZLIB PROPERTIES
2019-06-26 19:07:59 +00:00
DESCRIPTION "A Massively Spiffy Yet Delicately Unobtrusive Compression Library (found: v${ZLIB_VERSION_STRING})"
)
else()
set_package_properties(ZLIB PROPERTIES
DESCRIPTION "A Massively Spiffy Yet Delicately Unobtrusive Compression Library"
)
endif()
if(NOT ZLIB_FOUND)
message(FATAL_ERROR "*** The zlib library is required to build Matio from source.")
endif()
# Find HDF5 library
find_package(HDF5)
set_package_properties(HDF5 PROPERTIES
URL "https://support.hdfgroup.org/HDF5/"
PURPOSE "Required to build Matio."
TYPE REQUIRED
)
if(HDF5_FOUND AND HDF5_VERSION)
set_package_properties(HDF5 PROPERTIES
DESCRIPTION "A versatile data model, a portable file format and a software library (found: v${HDF5_VERSION})"
)
else()
set_package_properties(HDF5 PROPERTIES
DESCRIPTION "A versatile data model, a portable file format and a software library"
)
endif()
if(NOT HDF5_FOUND)
message(STATUS " The hdf5 library has not been found in your system.")
message(STATUS " Please try to install it by doing:")
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
message(STATUS " $ sudo port install hdf5")
message(STATUS " or")
message(STATUS " $ brew install hdf5")
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat" OR ${LINUX_DISTRIBUTION} MATCHES "CentOS")
message(STATUS " sudo yum install hdf5-devel")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(STATUS " sudo zypper install hdf5-devel")
else()
message(STATUS " sudo apt-get install libhdf5-dev")
endif()
endif()
message(FATAL_ERROR "*** The hdf5 library is required to build Matio from source.")
endif()
if(CMAKE_VERSION VERSION_LESS 3.7 OR "${HDF5_VERSION}" VERSION_LESS "1.8.13")
get_filename_component(ZLIB_BASE_DIR ${ZLIB_INCLUDE_DIRS} DIRECTORY)
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
if(NOT EXISTS "/usr/bin/libtoolize")
message(" libtool has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum groupinstall 'Development Tools'")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install libtoool")
2018-11-24 17:40:34 +00:00
else()
message(" sudo apt-get install libtool")
2018-11-24 17:40:34 +00:00
endif()
message(FATAL_ERROR "libtool is required to build matio from source.")
2018-11-24 17:40:34 +00:00
endif()
if(EXISTS "/usr/bin/aclocal" OR
EXISTS "/usr/bin/aclocal-1.16" OR
EXISTS "/usr/bin/aclocal-1.15" OR
EXISTS "/usr/bin/aclocal-1.14" OR
EXISTS "/usr/bin/aclocal-1.13" OR
EXISTS "/usr/bin/aclocal-1.11" OR
EXISTS "/usr/bin/aclocal-1.10")
message(STATUS "Automake found.")
2018-11-24 17:40:34 +00:00
else()
message(" aclocal has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum groupinstall 'Development Tools'")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install automake")
2018-11-24 17:40:34 +00:00
else()
message(" sudo apt-get install automake")
2018-11-24 17:40:34 +00:00
endif()
message(FATAL_ERROR "aclocal is required to build matio from source.")
2018-11-24 17:40:34 +00:00
endif()
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
if((NOT EXISTS /usr/local/bin/glibtoolize AND NOT EXISTS /opt/local/bin/glibtoolize) OR
(NOT EXISTS /usr/local/bin/aclocal AND NOT EXISTS /opt/local/bin/aclocal))
message(" libtool/automake tools have not been found.")
message(" You can try to install them by typing:")
message(" 'sudo port install libtool automake', if you use Macports, or 'brew install libtool automake', if you use Homebrew")
message(FATAL_ERROR "libtool/automake tools are required to build matio from source")
endif()
if(CMAKE_GENERATOR STREQUAL Xcode)
if(EXISTS /opt/local/bin/glibtoolize OR EXISTS /opt/local/bin/aclocal)
if(NOT EXISTS /usr/local/bin/glibtoolize OR NOT EXISTS /usr/local/bin/aclocal)
message(" WARNING: libtool/atomake binaries cannot be found by Xcode. Please do:")
message("sudo ln -s /opt/local/bin/glibtoolize /usr/local/bin/")
message("sudo ln -s /opt/local/bin/aclocal /usr/local/bin/")
message("sudo ln -s /opt/local/bin/autom4te /usr/local/bin/")
message("sudo ln -s /opt/local/bin/automake /usr/local/bin/")
message("sudo ln -s /opt/local/bin/autoconf /usr/local/bin/")
message("sudo ln -s /opt/local/bin/autoreconf /usr/local/bin/") # not needed by Matio, but by Protocol Buffers
message(FATAL_ERROR "libtool/automake tools cannot be found by Xcode")
endif()
endif()
endif()
endif()
list(GET HDF5_LIBRARIES 0 HDF5_FIRST_DIR)
get_filename_component(HDF5_BASE_DIR2 ${HDF5_FIRST_DIR} DIRECTORY)
get_filename_component(HDF5_BASE_DIR ${HDF5_BASE_DIR2} DIRECTORY)
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
if(EXISTS /opt/local/include/hdf5.h)
set(HDF5_BASE_DIR /opt/local)
2018-11-24 17:40:34 +00:00
endif()
if(EXISTS /usr/local/include/hdf5.h)
set(HDF5_BASE_DIR /usr/local)
2018-11-24 17:40:34 +00:00
endif()
endif()
set(MATIO_MAKE_PROGRAM ${CMAKE_MAKE_PROGRAM})
if(MATIO_MAKE_PROGRAM MATCHES "ninja" OR CMAKE_GENERATOR STREQUAL Xcode)
find_program(MATIO_MAKE_EXECUTABLE make
PATHS
/usr/bin
/usr/local/bin
)
if(NOT MATIO_MAKE_EXECUTABLE)
message(FATAL_ERROR "make is required to build Matio from source.")
2018-11-24 17:40:34 +00:00
endif()
set(MATIO_MAKE_PROGRAM ${MATIO_MAKE_EXECUTABLE})
2018-11-24 17:40:34 +00:00
endif()
set(MATIO_STATIC_LIB ${CMAKE_BINARY_DIR}/matio/lib/${CMAKE_FIND_LIBRARY_PREFIXES}matio${CMAKE_STATIC_LIBRARY_SUFFIX})
ExternalProject_Add(matio-${GNSSSDR_MATIO_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/matio
GIT_REPOSITORY https://github.com/tbeu/matio
GIT_TAG v${GNSSSDR_MATIO_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/matio/matio-${GNSSSDR_MATIO_LOCAL_VERSION}
UPDATE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/matio/matio-${GNSSSDR_MATIO_LOCAL_VERSION}/autogen.sh
CONFIGURE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/matio/matio-${GNSSSDR_MATIO_LOCAL_VERSION}/configure --with-hdf5=${HDF5_BASE_DIR} --with-zlib=${ZLIB_BASE_DIR} --with-default-file-ver=7.3 --enable-mat73=yes --prefix=<INSTALL_DIR>
BUILD_COMMAND ${MATIO_MAKE_PROGRAM}
)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/matio/lib)
else() # CMake >= 3.7
include(GNUInstallDirs)
set(MATIO_STATIC_LIB ${CMAKE_BINARY_DIR}/matio/${CMAKE_INSTALL_LIBDIR}/${CMAKE_FIND_LIBRARY_PREFIXES}matio${CMAKE_STATIC_LIBRARY_SUFFIX})
if("${HDF5_VERSION}" VERSION_GREATER "1.8.18" AND "${HDF5_VERSION}" VERSION_LESS "1.10.4")
# weird workaround, but it works in all tested distros (Ubuntu, Debian, Fedora, CentOS, OpenSUSE)
set(EXTRA_MATIO_BUILD_FLAGS -DMATIO_WITH_ZLIB=OFF -DHAVE_ZLIB=1)
endif()
ExternalProject_Add(matio-${GNSSSDR_MATIO_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/matio
GIT_REPOSITORY https://github.com/tbeu/matio
GIT_TAG v${GNSSSDR_MATIO_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/matio/matio-${GNSSSDR_MATIO_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/matio
CMAKE_ARGS -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
-DCMAKE_C_COMPILER=${CMAKE_C_COMPILER}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
-DMATIO_SHARED=OFF
"${EXTRA_MATIO_BUILD_FLAGS}"
-DHDF5_USE_STATIC_LIBRARIES=OFF
-DMATIO_DEFAULT_FILE_VERSION:STRING=7.3
-DMATIO_MAT73=ON
-DCMAKE_INSTALL_PREFIX=${CMAKE_BINARY_DIR}/matio
BUILD_COMMAND ${CMAKE_COMMAND}
"--build" "${CMAKE_BINARY_DIR}/matio"
"--config" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
BUILD_BYPRODUCTS ${MATIO_STATIC_LIB}
)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/matio/${CMAKE_INSTALL_LIBDIR})
endif()
if(NOT TARGET Matio::matio)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/matio/include)
add_library(Matio::matio STATIC IMPORTED)
add_dependencies(Matio::matio matio-${GNSSSDR_MATIO_LOCAL_VERSION})
set_target_properties(Matio::matio PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION ${MATIO_STATIC_LIB}
INTERFACE_INCLUDE_DIRECTORIES ${CMAKE_BINARY_DIR}/matio/include
INTERFACE_LINK_LIBRARIES "${MATIO_STATIC_LIB};${HDF5_LIBRARIES};${ZLIB_LIBRARIES}"
)
2018-11-24 17:40:34 +00:00
endif()
endif()
################################################################################
# PugiXML - https://pugixml.org/
################################################################################
2019-03-09 00:39:32 +00:00
find_package(PUGIXML)
set_package_properties(PUGIXML PROPERTIES
PURPOSE "Used to handle Galileo almanac XML files published by the European GNSS Service Centre."
TYPE REQUIRED
)
if(NOT PUGIXML_FOUND)
message(STATUS " PugiXML v${GNSSSDR_PUGIXML_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'.")
set(PUGIXML_COMPILER -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER})
set(PUGIXML_CMAKE_FLAGS "")
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{OECORE_TARGET_SYSROOT})
set(PUGIXML_COMPILER "")
if(NOT CMAKE_TOOLCHAIN_FILE)
set(PUGIXML_CMAKE_FLAGS "-DCMAKE_TOOLCHAIN_FILE=${CMAKE_SOURCE_DIR}/cmake/Toolchains/oe-sdk_cross.cmake")
else()
set(PUGIXML_CMAKE_FLAGS "-DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}")
endif()
2019-11-01 18:29:28 +00:00
else()
if(CMAKE_TOOLCHAIN_FILE)
set(PUGIXML_CMAKE_FLAGS "-DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}")
2019-11-01 18:29:28 +00:00
endif()
2018-11-24 17:40:34 +00:00
endif()
2020-01-19 23:35:00 +00:00
set(PUGIXML_BUILD_COMMAND ${CMAKE_COMMAND}
"--build" "${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}"
2020-01-19 23:35:00 +00:00
"--config" $<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
)
if(CMAKE_VERSION VERSION_LESS 3.2)
2018-11-24 17:40:34 +00:00
ExternalProject_Add(pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
2018-11-24 17:40:34 +00:00
GIT_REPOSITORY https://github.com/zeux/pugixml
GIT_TAG v${GNSSSDR_PUGIXML_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/pugixml/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS ${PUGIXML_COMPILER}
${PUGIXML_CMAKE_FLAGS}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
2018-11-24 17:40:34 +00:00
UPDATE_COMMAND ""
PATCH_COMMAND ""
BUILD_COMMAND ${PUGIXML_BUILD_COMMAND}
2018-11-24 17:40:34 +00:00
INSTALL_COMMAND ""
)
2018-11-24 17:40:34 +00:00
else()
if(CMAKE_VERSION VERSION_GREATER 3.12.0)
set(PARALLEL_BUILD "--parallel 2")
endif()
2018-11-24 17:40:34 +00:00
ExternalProject_Add(pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
2018-11-24 17:40:34 +00:00
GIT_REPOSITORY https://github.com/zeux/pugixml
GIT_TAG v${GNSSSDR_PUGIXML_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/pugixml/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}
2020-01-19 23:35:00 +00:00
CMAKE_ARGS ${PUGIXML_COMPILER}
${PUGIXML_CMAKE_FLAGS}
-DCMAKE_BUILD_TYPE=$<$<CONFIG:Debug>:Debug>$<$<CONFIG:Release>:Release>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo>$<$<CONFIG:MinSizeRel>:MinSizeRel>$<$<CONFIG:NoOptWithASM>:Debug>$<$<CONFIG:Coverage>:Debug>$<$<CONFIG:O2WithASM>:RelWithDebInfo>$<$<CONFIG:O3WithASM>:RelWithDebInfo>$<$<CONFIG:ASAN>:Debug>
2018-11-24 17:40:34 +00:00
UPDATE_COMMAND ""
PATCH_COMMAND ""
2020-06-21 19:59:05 +00:00
BUILD_COMMAND "${PUGIXML_BUILD_COMMAND} ${PARALLEL_BUILD}"
BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX}
2018-11-24 17:40:34 +00:00
INSTALL_COMMAND ""
)
2018-11-24 17:40:34 +00:00
endif()
2019-02-03 18:24:44 +00:00
set(PUGIXML_LIBRARIES ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX})
2019-02-03 18:24:44 +00:00
if(NOT TARGET Pugixml::pugixml)
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/thirdparty/pugixml/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/src)
2019-02-03 18:24:44 +00:00
add_library(Pugixml::pugixml STATIC IMPORTED)
add_dependencies(Pugixml::pugixml pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION})
set_target_properties(Pugixml::pugixml PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_CONFIGURATIONS "None;Debug;Release;RelWithDebInfo;MinSizeRel"
MAP_IMPORTED_CONFIG_NOOPTWITHASM Debug
MAP_IMPORTED_CONFIG_COVERAGE Debug
MAP_IMPORTED_CONFIG_O2WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_O3WITHASM RelWithDebInfo
MAP_IMPORTED_CONFIG_ASAN Debug
IMPORTED_LOCATION_NONE ${PUGIXML_LIBRARIES}
IMPORTED_LOCATION_DEBUG ${PUGIXML_LIBRARIES}
IMPORTED_LOCATION_RELEASE ${PUGIXML_LIBRARIES}
IMPORTED_LOCATION_RELWITHDEBINFO ${PUGIXML_LIBRARIES}
IMPORTED_LOCATION_MINSIZEREL ${PUGIXML_LIBRARIES}
INTERFACE_INCLUDE_DIRECTORIES ${CMAKE_BINARY_DIR}/thirdparty/pugixml/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/src
INTERFACE_LINK_LIBRARIES ${PUGIXML_LIBRARIES}
2019-02-03 18:24:44 +00:00
)
if((CMAKE_GENERATOR STREQUAL Xcode) OR MSVC)
set_target_properties(Pugixml::pugixml PROPERTIES
IMPORTED_LOCATION_DEBUG ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/Debug/${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELEASE ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/Release/${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_RELWITHDEBINFO ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/RelWithDebInfo/${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX}
IMPORTED_LOCATION_MINSIZEREL ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/MinSizeRel/${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX}
INTERFACE_LINK_LIBRARIES ${CMAKE_BINARY_DIR}/pugixml-${GNSSSDR_PUGIXML_LOCAL_VERSION}/$<$<CONFIG:Debug>:Debug/>$<$<CONFIG:Release>:Release/>$<$<CONFIG:RelWithDebInfo>:RelWithDebInfo/>$<$<CONFIG:MinSizeRel>:MinSizeRel/>${CMAKE_FIND_LIBRARY_PREFIXES}pugixml${CMAKE_STATIC_LIBRARY_SUFFIX}
)
endif()
2019-02-03 18:24:44 +00:00
endif()
2019-03-09 00:39:32 +00:00
set_package_properties(PUGIXML PROPERTIES
PURPOSE "PugiXML v${GNSSSDR_PUGIXML_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-03-09 00:39:32 +00:00
)
2018-11-24 17:40:34 +00:00
endif()
2016-11-27 22:47:45 +00:00
################################################################################
# Protocol Buffers https://github.com/protocolbuffers/protobuf
################################################################################
2019-04-21 09:51:49 +00:00
find_package(Protobuf)
set_package_properties(Protobuf PROPERTIES
URL "https://developers.google.com/protocol-buffers/"
PURPOSE "Used to serialize output data in a way that can be read by other applications."
TYPE REQUIRED
)
if(NOT Protobuf_VERSION)
set(Protobuf_VERSION "0.0.0")
endif()
if(CMAKE_VERSION VERSION_LESS 3.6)
if(PROTOBUF_FOUND)
set(Protobuf_FOUND ${PROTOBUF_FOUND})
endif()
endif()
2019-04-21 09:51:49 +00:00
if(Protobuf_FOUND AND CMAKE_VERSION VERSION_LESS 3.9)
if(PROTOBUF_INCLUDE_DIR)
set(Protobuf_INCLUDE_DIR ${PROTOBUF_INCLUDE_DIR})
endif()
if(PROTOBUF_LIBRARY)
set(Protobuf_LIBRARY ${PROTOBUF_LIBRARY})
endif()
if(PROTOBUF_PROTOC_EXECUTABLE)
set(Protobuf_PROTOC_EXECUTABLE ${PROTOBUF_PROTOC_EXECUTABLE})
endif()
if(PROTOBUF_PROTOC_LIBRARY)
set(Protobuf_PROTOC_LIBRARY ${PROTOBUF_PROTOC_EXECUTABLE})
endif()
2019-04-21 09:51:49 +00:00
add_library(protobuf::libprotobuf SHARED IMPORTED)
set_target_properties(protobuf::libprotobuf PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION "${Protobuf_LIBRARY}"
INTERFACE_INCLUDE_DIRECTORIES "${Protobuf_INCLUDE_DIR}"
INTERFACE_LINK_LIBRARIES "${Protobuf_LIBRARY}"
)
2019-04-21 09:51:49 +00:00
add_executable(protobuf::protoc IMPORTED)
set_target_properties(protobuf::protoc PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION "${Protobuf_PROTOC_EXECUTABLE}"
INTERFACE_LINK_LIBRARIES "${Protobuf_PROTOC_LIBRARY}"
)
if(${Protobuf_VERSION} VERSION_EQUAL "0.0.0")
set(_PROTOBUF_COMMON_HEADER ${Protobuf_INCLUDE_DIR}/google/protobuf/stubs/common.h)
set(Protobuf_VERSION "")
set(Protobuf_LIB_VERSION "")
file(STRINGS ${_PROTOBUF_COMMON_HEADER} _PROTOBUF_COMMON_H_CONTENTS REGEX "#define[ \t]+GOOGLE_PROTOBUF_VERSION[ \t]+")
if(_PROTOBUF_COMMON_H_CONTENTS MATCHES "#define[ \t]+GOOGLE_PROTOBUF_VERSION[ \t]+([0-9]+)")
set(Protobuf_LIB_VERSION "${CMAKE_MATCH_1}")
endif()
unset(_PROTOBUF_COMMON_H_CONTENTS)
math(EXPR _PROTOBUF_MAJOR_VERSION "${Protobuf_LIB_VERSION} / 1000000")
math(EXPR _PROTOBUF_MINOR_VERSION "${Protobuf_LIB_VERSION} / 1000 % 1000")
math(EXPR _PROTOBUF_SUBMINOR_VERSION "${Protobuf_LIB_VERSION} % 1000")
set(Protobuf_VERSION "${_PROTOBUF_MAJOR_VERSION}.${_PROTOBUF_MINOR_VERSION}.${_PROTOBUF_SUBMINOR_VERSION}")
endif()
2019-04-21 09:51:49 +00:00
endif()
if(Protobuf_FOUND)
set_package_properties(Protobuf PROPERTIES
DESCRIPTION "Structured data serialization mechanism (found: v${Protobuf_VERSION})"
)
else()
set_package_properties(Protobuf PROPERTIES
DESCRIPTION "Structured data serialization mechanism"
)
endif()
2019-04-21 09:51:49 +00:00
if(Protobuf_FOUND AND CMAKE_CROSSCOMPILING)
find_program(PROTOC_EXECUTABLE protoc)
if(NOT PROTOC_EXECUTABLE)
find_program(PROTOC_EXECUTABLE protoc
2019-10-10 18:05:14 +00:00
PATHS
/usr/bin
/usr/local/bin
)
endif()
2019-04-21 09:51:49 +00:00
if(PROTOC_EXECUTABLE)
2019-04-21 08:08:39 +00:00
set_target_properties(protobuf::protoc PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
2019-04-21 09:51:49 +00:00
IMPORTED_LOCATION ${PROTOC_EXECUTABLE}
2019-04-21 08:08:39 +00:00
)
set(Protobuf_PROTOC_EXECUTABLE ${PROTOC_EXECUTABLE})
2018-11-24 17:40:34 +00:00
else()
message(FATAL_ERROR "Please install the Protocol Buffers compiler v${Protobuf_VERSION} in the host machine")
2019-04-21 08:08:39 +00:00
endif()
2019-04-21 09:51:49 +00:00
endif()
2019-04-21 09:51:49 +00:00
if((NOT Protobuf_FOUND) OR (NOT Protobuf_PROTOC_EXECUTABLE) OR (${Protobuf_VERSION} VERSION_LESS ${GNSSSDR_PROTOBUF_MIN_VERSION}))
unset(Protobuf_PROTOC_EXECUTABLE)
if(CMAKE_CROSSCOMPILING)
if(NOT Protobuf_FOUND)
ExternalProject_Add(protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
2019-04-21 09:51:49 +00:00
GIT_REPOSITORY https://github.com/protocolbuffers/protobuf
GIT_TAG v${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
UPDATE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/autogen.sh
CONFIGURE_COMMAND "${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/configure --prefix=${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION} --host=$ENV{OECORE_TARGET_ARCH} --with-protoc=${PROTOC_EXECUTABLE}"
2019-04-21 09:51:49 +00:00
BUILD_COMMAND ${CMAKE_MAKE_PROGRAM}
INSTALL_COMMAND ${CMAKE_MAKE_PROGRAM} DESTDIR= install
BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}protobuf${CMAKE_STATIC_LIBRARY_SUFFIX}
${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/bin/protoc
)
set(PROTOBUF_PROTOC_EXECUTABLE "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/bin/protoc")
endif()
2019-04-21 09:51:49 +00:00
else()
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
if(NOT EXISTS "/usr/bin/libtoolize")
message(" libtool has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum groupinstall 'Development Tools'")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install libtoool")
else()
message(" sudo apt-get install libtool")
endif()
message(FATAL_ERROR "libtool is required to build Protocol Buffers from source")
endif()
if(EXISTS "/usr/bin/aclocal" OR
EXISTS "/usr/bin/aclocal-1.16" OR
EXISTS "/usr/bin/aclocal-1.15" OR
EXISTS "/usr/bin/aclocal-1.14" OR
EXISTS "/usr/bin/aclocal-1.13" OR
EXISTS "/usr/bin/aclocal-1.11" OR
EXISTS "/usr/bin/aclocal-1.10")
message(STATUS "Automake found.")
else()
message(" aclocal has not been found.")
message(" You can try to install it by typing:")
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(" sudo yum groupinstall 'Development Tools'")
elseif(${LINUX_DISTRIBUTION} MATCHES "openSUSE")
message(" sudo zypper install automake")
else()
message(" sudo apt-get install automake")
endif()
message(FATAL_ERROR "aclocal is required to build Protocol Buffers from source")
endif()
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
if((NOT EXISTS /usr/local/bin/glibtoolize AND NOT EXISTS /opt/local/bin/glibtoolize) OR
(NOT EXISTS /usr/local/bin/aclocal AND NOT EXISTS /opt/local/bin/aclocal))
message(" libtool/automake tools have not been found.")
message(" You can try to install them by typing:")
message(" 'sudo port install libtool automake', if you use Macports, or 'brew install libtool automake', if you use Homebrew")
message(FATAL_ERROR "libtool/automake tools are required to build Protocol Buffers from source")
endif()
if(CMAKE_GENERATOR STREQUAL Xcode)
if(EXISTS /opt/local/bin/glibtoolize OR EXISTS /opt/local/bin/aclocal)
if(NOT EXISTS /usr/local/bin/glibtoolize OR NOT EXISTS /usr/local/bin/aclocal)
message(" WARNING: libtool/automake binaries cannot be found by Xcode. Please do:")
message("sudo ln -s /opt/local/bin/glibtoolize /usr/local/bin/")
message("sudo ln -s /opt/local/bin/aclocal /usr/local/bin/")
message("sudo ln -s /opt/local/bin/autom4te /usr/local/bin/")
message("sudo ln -s /opt/local/bin/automake /usr/local/bin/")
message("sudo ln -s /opt/local/bin/autoconf /usr/local/bin/")
message("sudo ln -s /opt/local/bin/autoreconf /usr/local/bin/")
message(FATAL_ERROR "libtool/automake tools cannot be found by Xcode")
endif()
endif()
endif()
endif()
set(PROTOBUF_MAKE_PROGRAM ${CMAKE_MAKE_PROGRAM})
if(PROTOBUF_MAKE_PROGRAM MATCHES "ninja" OR CMAKE_GENERATOR STREQUAL Xcode)
find_program(MAKE_EXECUTABLE make
2019-10-10 18:05:14 +00:00
PATHS
/usr/bin
/usr/local/bin
)
if(NOT MAKE_EXECUTABLE)
message(FATAL_ERROR "make is required to build Protocol Buffers from source.")
endif()
set(PROTOBUF_MAKE_PROGRAM ${MAKE_EXECUTABLE})
endif()
2019-04-21 09:51:49 +00:00
if(CMAKE_VERSION VERSION_LESS 3.2)
ExternalProject_Add(protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
2019-04-21 09:51:49 +00:00
GIT_REPOSITORY https://github.com/protocolbuffers/protobuf
GIT_TAG v${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
UPDATE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/autogen.sh
CONFIGURE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/configure --prefix=${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
BUILD_COMMAND ${PROTOBUF_MAKE_PROGRAM}
INSTALL_COMMAND ${PROTOBUF_MAKE_PROGRAM} DESTDIR= install
2019-04-21 09:51:49 +00:00
)
else()
if(CMAKE_MAKE_PROGRAM MATCHES "make")
include(ProcessorCount)
ProcessorCount(NUMBER_OF_PROCESSORS)
if(NUMBER_OF_PROCESSORS GREATER 1)
set(PROTOBUF_PARALLEL_BUILD "-j${NUMBER_OF_PROCESSORS}")
endif()
endif()
2019-04-21 09:51:49 +00:00
ExternalProject_Add(protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
PREFIX ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
2019-04-21 09:51:49 +00:00
GIT_REPOSITORY https://github.com/protocolbuffers/protobuf
GIT_TAG v${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
SOURCE_DIR ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
BINARY_DIR ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
UPDATE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/autogen.sh
CONFIGURE_COMMAND ${CMAKE_BINARY_DIR}/thirdparty/protobuf/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/configure --prefix=${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}
2020-06-21 20:19:47 +00:00
BUILD_COMMAND ${PROTOBUF_MAKE_PROGRAM} ${PROTOBUF_PARALLEL_BUILD}
INSTALL_COMMAND ${PROTOBUF_MAKE_PROGRAM} DESTDIR= install
BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}protobuf${CMAKE_STATIC_LIBRARY_SUFFIX}
${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/bin/protoc
)
endif()
2019-04-21 09:51:49 +00:00
if(NOT TARGET protobuf::protoc)
add_executable(protobuf::protoc IMPORTED)
add_dependencies(protobuf::protoc protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION})
endif()
2019-04-21 09:51:49 +00:00
unset(Protobuf_PROTOC_EXECUTABLE)
set(PROTOBUF_PROTOC_EXECUTABLE "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/bin/protoc")
2019-04-21 09:51:49 +00:00
set_target_properties(protobuf::protoc PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/bin/protoc"
INTERFACE_LINK_LIBRARIES "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}protoc${CMAKE_STATIC_LIBRARY_SUFFIX}"
)
2019-04-21 09:51:49 +00:00
endif()
file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/include)
2019-04-21 09:51:49 +00:00
if(NOT TARGET protobuf::libprotobuf)
add_library(protobuf::libprotobuf STATIC IMPORTED)
add_dependencies(protobuf::libprotobuf protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION})
2018-11-24 17:40:34 +00:00
endif()
2019-04-21 09:51:49 +00:00
set_target_properties(protobuf::libprotobuf PROPERTIES
IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
IMPORTED_LOCATION "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}protobuf${CMAKE_STATIC_LIBRARY_SUFFIX}"
INTERFACE_INCLUDE_DIRECTORIES "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/include"
INTERFACE_LINK_LIBRARIES "${CMAKE_BINARY_DIR}/protobuf-${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION}/lib/${CMAKE_FIND_LIBRARY_PREFIXES}protobuf${CMAKE_STATIC_LIBRARY_SUFFIX}"
2019-04-21 09:51:49 +00:00
)
if(CMAKE_VERSION VERSION_LESS 3.10)
set(Protobuf_PROTOC_EXECUTABLE ${PROTOBUF_PROTOC_EXECUTABLE})
endif()
2019-04-21 09:51:49 +00:00
if(${Protobuf_VERSION} VERSION_LESS ${GNSSSDR_PROTOBUF_MIN_VERSION})
if(NOT (${Protobuf_VERSION} EQUAL "0.0.0"))
set_package_properties(Protobuf PROPERTIES
PURPOSE "Protocol Buffers found (v${Protobuf_VERSION}) is too old (> v${GNSSSDR_PROTOBUF_MIN_VERSION} needed)."
)
endif()
endif()
2019-04-21 09:51:49 +00:00
set_package_properties(Protobuf PROPERTIES
PURPOSE "Protocol Buffers v${GNSSSDR_PROTOCOLBUFFERS_LOCAL_VERSION} will be downloaded, built, and statically linked when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'."
2019-04-21 09:51:49 +00:00
)
endif()
if(${Protobuf_VERSION} VERSION_EQUAL "0.0.0")
unset(Protobuf_VERSION)
2018-11-24 17:40:34 +00:00
endif()
2019-08-04 21:15:31 +00:00
2016-11-27 22:47:45 +00:00
################################################################################
# Doxygen - https://www.doxygen.nl (OPTIONAL, used if found)
################################################################################
if(CMAKE_VERSION VERSION_LESS 3.6.9)
find_package(Doxygen)
else()
find_package(Doxygen OPTIONAL_COMPONENTS dot)
endif()
set_package_properties(Doxygen PROPERTIES
URL "https://www.doxygen.nl"
PURPOSE "Used to generate code documentation by doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc'"
TYPE OPTIONAL
)
if(DOXYGEN_FOUND AND DOXYGEN_VERSION)
set_package_properties(Doxygen PROPERTIES
DESCRIPTION "Generates documentation from annotated C++ sources (found: v${DOXYGEN_VERSION})"
)
else()
set_package_properties(Doxygen PROPERTIES
DESCRIPTION "Generates documentation from annotated C++ sources"
)
endif()
if(CMAKE_VERSION VERSION_LESS 3.2.3)
find_package(LATEX)
else()
find_package(LATEX COMPONENTS PDFLATEX)
endif()
set_package_properties(LATEX PROPERTIES
URL "https://www.latex-project.org"
DESCRIPTION "High-quality typesetting system"
PURPOSE "Used to generate a PDF manual by doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} pdfmanual'."
TYPE OPTIONAL
)
if(DEFINED MATHJAX2_ROOT)
set(ENABLE_EXTERNAL_MATHJAX OFF)
endif()
if(ENABLE_EXTERNAL_MATHJAX AND NOT DEFINED MATHJAX2_USE_ROOT)
set(MATHJAX2_USE_ROOT "https://cdnjs.cloudflare.com/ajax/libs/mathjax/${GNSSSDR_MATHJAX_EXTERNAL_VERSION}")
endif()
unset(MATHJAX2_FOUND CACHE)
find_package(MATHJAX2)
set_package_properties(MATHJAX2 PROPERTIES
URL "https://www.mathjax.org"
DESCRIPTION "Beautiful and accessible math in all browsers"
PURPOSE "Used to generate equations in HTML docs when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc'."
TYPE OPTIONAL
)
if(DOXYGEN_FOUND)
2018-11-19 07:51:05 +00:00
message(STATUS "Doxygen found.")
message(STATUS " You can build the documentation with '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc'.")
2020-10-30 11:39:05 +00:00
message(STATUS " When done, point your browser to ${CMAKE_BINARY_DIR}/docs/html/index.html")
if(CMAKE_VERSION VERSION_LESS 3.9.6)
if(DOXYGEN_DOT_FOUND)
set(HAVE_DOT "YES")
endif()
if(NOT TARGET Doxygen::doxygen)
add_executable(Doxygen::doxygen IMPORTED GLOBAL)
set_target_properties(Doxygen::doxygen PROPERTIES
IMPORTED_LOCATION "${DOXYGEN_EXECUTABLE}"
)
endif()
else()
if(TARGET Doxygen::dot)
set(HAVE_DOT "YES")
else()
set(HAVE_DOT "NO")
endif()
endif()
2018-11-19 07:51:05 +00:00
file(TO_NATIVE_PATH ${CMAKE_SOURCE_DIR} top_srcdir)
file(TO_NATIVE_PATH ${CMAKE_BINARY_DIR} top_builddir)
set(PDFMANUAL_MAKE_PROGRAM ${CMAKE_MAKE_PROGRAM})
if(PDFMANUAL_MAKE_PROGRAM MATCHES "ninja")
find_program(PDFMANUAL_MAKE_EXECUTABLE make
PATHS
/usr/bin
/usr/local/bin
)
if(NOT PDFMANUAL_MAKE_EXECUTABLE)
if(PDFLATEX_COMPILER)
message(STATUS "Warning: make is required to build the PDF manual, so target pdfmanual will not be generated.")
endif()
set(PDFLATEX_COMPILER FALSE)
endif()
set(PDFMANUAL_MAKE_PROGRAM ${PDFMANUAL_MAKE_EXECUTABLE})
endif()
2018-11-19 07:51:05 +00:00
if(PDFLATEX_COMPILER)
set(GENERATE_PDF_DOCUMENTATION "YES")
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
set(GENERATE_PDF_DOCUMENTATION "NO")
endif()
if(MATHJAX2_FOUND)
2018-11-19 07:51:05 +00:00
set(GNSSSDR_USE_MATHJAX "YES")
else()
set(GNSSSDR_USE_MATHJAX "NO")
2018-11-24 17:40:34 +00:00
endif()
2018-11-19 07:51:05 +00:00
configure_file(${CMAKE_SOURCE_DIR}/docs/doxygen/Doxyfile.in
${CMAKE_BINARY_DIR}/docs/doxygen/Doxyfile
@ONLY
)
add_custom_target(doc
Doxygen::doxygen ${CMAKE_BINARY_DIR}/docs/doxygen/Doxyfile
2018-11-19 07:51:05 +00:00
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
COMMENT "Generating HTML documentation from source code with Doxygen..." VERBATIM
2018-11-19 07:51:05 +00:00
)
2019-03-09 00:39:32 +00:00
if(PDFLATEX_COMPILER)
message(STATUS " '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} pdfmanual' will generate a manual at ${CMAKE_BINARY_DIR}/docs/GNSS-SDR_manual.pdf")
2018-11-19 07:51:05 +00:00
add_custom_target(pdfmanual
COMMAND ${PDFMANUAL_MAKE_PROGRAM}
2018-11-19 07:51:05 +00:00
COMMAND ${CMAKE_COMMAND} -E copy refman.pdf ${CMAKE_BINARY_DIR}/docs/GNSS-SDR_manual.pdf
COMMAND ${PDFMANUAL_MAKE_PROGRAM} clean
2018-11-19 07:51:05 +00:00
DEPENDS doc
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/docs/latex
COMMENT "Generating PDF manual with LaTeX and pdflatex..." VERBATIM
2018-11-19 07:51:05 +00:00
)
2018-11-24 17:40:34 +00:00
endif()
message(STATUS " '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc-clean' will clean the documentation.")
if(CMAKE_VERSION VERSION_LESS 3.17)
add_custom_target(doc-clean
COMMAND ${CMAKE_COMMAND} -E remove_directory ${CMAKE_BINARY_DIR}/docs/html
COMMAND ${CMAKE_COMMAND} -E remove_directory ${CMAKE_BINARY_DIR}/docs/latex
COMMAND ${CMAKE_COMMAND} -E remove ${CMAKE_BINARY_DIR}/docs/GNSS-SDR_manual.pdf
COMMENT "Cleaning documentation." VERBATIM
)
else()
add_custom_target(doc-clean
COMMAND ${CMAKE_COMMAND} -E rm -rf ${CMAKE_BINARY_DIR}/docs/html
COMMAND ${CMAKE_COMMAND} -E rm -rf ${CMAKE_BINARY_DIR}/docs/latex
COMMAND ${CMAKE_COMMAND} -E rm -f ${CMAKE_BINARY_DIR}/docs/GNSS-SDR_manual.pdf
COMMENT "Cleaning documentation." VERBATIM
)
endif()
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
message(STATUS " Doxygen has not been found in your system.")
message(STATUS " You can get nice code documentation by using it!")
message(STATUS " Get it from https://www.doxygen.nl/download.html")
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
2018-11-19 07:51:05 +00:00
if(${LINUX_DISTRIBUTION} MATCHES "Fedora" OR ${LINUX_DISTRIBUTION} MATCHES "Red Hat")
message(STATUS " or simply by doing 'sudo yum install doxygen-latex'.")
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
message(STATUS " or simply by doing 'sudo apt-get install doxygen-latex'.")
2018-11-24 17:40:34 +00:00
endif()
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
message(STATUS " or simply by doing 'sudo port install doxygen +docs', if you are using Macports,")
message(STATUS " or 'brew cask install mactex', then restart Terminal and do 'brew install graphviz doxygen', if you use Homebrew.")
2018-11-24 17:40:34 +00:00
endif()
set(ENABLE_EXTERNAL_MATHJAX OFF)
2018-11-24 17:40:34 +00:00
endif()
################################################################################
# OpenCL (OPTIONAL)
################################################################################
2019-03-09 00:39:32 +00:00
find_package(OPENCL QUIET)
set_package_properties(OPENCL PROPERTIES
PURPOSE "Used in some processing block implementations."
TYPE OPTIONAL
)
if(NOT OPENCL_FOUND)
set(ENABLE_OPENCL OFF)
endif()
if(ENABLE_OPENCL)
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{DISABLE_OPENCL})
set(DISABLE_OPENCL TRUE)
2018-11-24 17:40:34 +00:00
endif()
if(DISABLE_OPENCL)
set(ENABLE_OPENCL OFF)
2018-11-24 17:40:34 +00:00
else()
if(OPENCL_FOUND)
message(STATUS "OpenCL has been found and will be used by some processing blocks")
2019-06-26 21:20:12 +00:00
message(STATUS " You can disable OpenCL use by doing 'cmake -DENABLE_OPENCL=OFF ..'")
2018-11-24 17:40:34 +00:00
endif()
endif()
if(ENABLE_GENERIC_ARCH)
set(ENABLE_OPENCL OFF)
message(STATUS "ENABLE_GENERIC_ARCH is set to ON so the use of OpenCL has been disabled.")
2018-11-24 17:40:34 +00:00
endif()
if(NOT OPENCL_FOUND)
message(STATUS "Processing blocks using OpenCL will not be built.")
2018-11-24 17:40:34 +00:00
endif()
endif()
2016-11-27 22:47:45 +00:00
################################################################################
2015-08-25 17:01:02 +00:00
# CUDA (OPTIONAL)
################################################################################
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{CUDA_GPU_ACCEL})
2018-11-19 07:51:05 +00:00
message(STATUS "CUDA_GPU_ACCEL environment variable found.")
2015-08-25 17:01:02 +00:00
set(ENABLE_CUDA ON)
2018-11-24 17:40:34 +00:00
endif()
2015-08-25 17:01:02 +00:00
if(ENABLE_CUDA)
set(CMAKE_CUDA_STANDARD 14)
set(CMAKE_CUDA_EXTENSIONS ON)
2019-06-24 18:02:19 +00:00
if(CMAKE_VERSION VERSION_GREATER 3.11)
include(CheckLanguage)
check_language(CUDA)
if(CMAKE_CUDA_COMPILER)
enable_language(CUDA)
set(CUDA_FOUND TRUE)
else()
set(ENABLE_CUDA OFF)
endif()
else()
find_package(CUDA REQUIRED)
set_package_properties(CUDA PROPERTIES
URL "https://developer.nvidia.com/cuda-downloads"
PURPOSE "Used in some processing block implementations."
TYPE REQUIRED
)
if(CUDA_FOUND)
set_package_properties(CUDA PROPERTIES
DESCRIPTION "Library for parallel programming in Nvidia GPUs (found: v${CUDA_VERSION_STRING})"
)
set(CMAKE_CUDA_COMPILER_ID "NVIDIA") # only for reporting purposes
set(CMAKE_CUDA_COMPILER_VERSION ${CUDA_VERSION_STRING}) # only for reporting purposes
else()
set_package_properties(CUDA PROPERTIES
DESCRIPTION "Library for parallel programming in Nvidia GPUs"
)
2019-06-24 18:02:19 +00:00
set(ENABLE_CUDA OFF)
endif()
endif()
endif()
if(ENABLE_CUDA)
2018-11-19 07:51:05 +00:00
message(STATUS "NVIDIA CUDA GPU Acceleration will be enabled.")
message(STATUS " You can disable it with 'cmake -DENABLE_CUDA=OFF ..'")
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
message(STATUS "NVIDIA CUDA GPU Acceleration will be not enabled.")
2018-11-24 17:40:34 +00:00
endif()
2015-08-25 17:01:02 +00:00
################################################################################
# CUSTOM UDP PACKET SOURCE (OPTIONAL)
################################################################################
2019-03-09 00:39:32 +00:00
find_package(PCAP)
set_package_properties(PCAP PROPERTIES
PURPOSE "Used for the custom UDP IP packet source."
TYPE OPTIONAL
)
if(PCAP_FOUND)
set(ENABLE_RAW_UDP ON)
endif()
if(ENABLE_RAW_UDP)
message(STATUS "Highly-optimized custom UDP IP packet source is enabled.")
message(STATUS " You can disable it with 'cmake -DENABLE_RAW_UDP=OFF ..'")
2019-02-04 17:17:35 +00:00
if(NOT PCAP_FOUND)
message(FATAL_ERROR "PCAP required to compile custom UDP packet sample source (with ENABLE_RAW_UDP=ON)")
endif()
2018-11-24 17:40:34 +00:00
endif()
2019-02-04 17:17:35 +00:00
################################################################################
# FPGA (OPTIONAL)
################################################################################
if(ENABLE_FPGA)
2019-08-12 09:53:53 +00:00
message(STATUS "FPGA offloading will be enabled.")
message(STATUS " You can disable it with 'cmake -DENABLE_FPGA=OFF ..'")
2018-11-24 17:40:34 +00:00
else()
2019-08-12 09:53:53 +00:00
message(STATUS "FPGA offloading will be not enabled.")
message(STATUS " Enable it with 'cmake -DENABLE_FPGA=ON ..' to add support for FPGA offloading.")
2018-11-24 17:40:34 +00:00
endif()
################################################################################
# Setup of optional drivers
################################################################################
2019-02-04 21:44:45 +00:00
##########################################
2019-02-04 17:17:35 +00:00
# gr-osmosdr - OPTIONAL
2019-02-04 21:44:45 +00:00
# https://github.com/osmocom/gr-osmosdr
##########################################
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{RTLSDR_DRIVER})
2018-11-19 07:51:05 +00:00
message(STATUS "RTLSDR_DRIVER environment variable found.")
set(ENABLE_OSMOSDR ON)
2018-11-24 17:40:34 +00:00
endif()
2019-03-09 00:39:32 +00:00
find_package(GROSMOSDR)
set_package_properties(GROSMOSDR PROPERTIES
PURPOSE "Used for communication with OsmoSDR and other front-ends (HackRF, bladeRF, Realtek's RTL2832U-based dongles, etc.)."
TYPE OPTIONAL
)
if(ENABLE_OSMOSDR)
if(GROSMOSDR_FOUND)
2018-11-19 07:51:05 +00:00
message(STATUS "The driver for OsmoSDR and other front-ends (HackRF, bladeRF, Realtek's RTL2832U-based dongles, etc.) will be compiled.")
message(STATUS " You can disable it with 'cmake -DENABLE_OSMOSDR=OFF ..'")
2018-11-24 17:40:34 +00:00
else()
if(ENABLE_PACKAGING)
2018-11-24 17:40:34 +00:00
message(WARNING "gr-osmosdr has not been found. Source blocks depending on it will NOT be built.")
else()
message(FATAL_ERROR "gr-osmosdr required to build gnss-sdr with the optional OSMOSDR driver")
endif()
set(ENABLE_OSMOSDR OFF)
2018-11-24 17:40:34 +00:00
endif()
else()
2018-11-19 07:51:05 +00:00
message(STATUS "The (optional) driver for OsmoSDR and related front-ends is not enabled.")
message(STATUS " Enable it with 'cmake -DENABLE_OSMOSDR=ON ..' to add support for OsmoSDR and other front-ends (HackRF, bladeRF, Realtek's RTL2832U-based USB dongles, etc.)")
2018-11-24 17:40:34 +00:00
endif()
2019-02-04 17:17:35 +00:00
##########################################
# gr-limesdr - OPTIONAL
# https://github.com/myriadrf/gr-limesdr
##########################################
find_package(GRLIMESDR)
set_package_properties(GRLIMESDR PROPERTIES
PURPOSE "Used for communication with LimeSDR."
TYPE OPTIONAL
)
if(ENABLE_LIMESDR)
if(GRLIMESDR_FOUND)
message(STATUS "The driver for LimeSDR will be compiled.")
message(STATUS " You can disable it with 'cmake -DENABLE_LIMESDR=OFF ..'")
else()
if(ENABLE_PACKAGING)
message(WARNING "gr-limesdr has not been found. Source blocks depending on it will NOT be built.")
else()
message(FATAL_ERROR "gr-limesdr required to build gnss-sdr with the optional LIMESDR driver")
endif()
set(ENABLE_LIMESDR OFF)
endif()
else()
message(STATUS "The (optional) driver for LimeSDR is not enabled.")
message(STATUS " Enable it with 'cmake -DENABLE_LIMESDR=ON ..' to add support for LimeSDR.")
endif()
2019-02-04 17:17:35 +00:00
##############################################
# gr-iio - OPTIONAL
2019-02-04 21:44:45 +00:00
# IIO blocks for GNU Radio
# https://github.com/analogdevicesinc/gr-iio
2019-02-04 17:17:35 +00:00
##############################################
if(GNURADIO_IIO_FOUND)
set(GRIIO_FOUND TRUE)
set(GR_IIO_INCLUDE_HAS_GNURADIO TRUE)
set(GNURADIO_API_IIO TRUE)
else()
# Force to always search for gr-iio
unset(GRIIO_FOUND CACHE)
unset(IIO_INCLUDE_DIRS CACHE)
unset(IIO_LIBRARIES CACHE)
find_package(GRIIO)
set_package_properties(GRIIO PROPERTIES
PURPOSE "Used for communication with PlutoSDR and FMCOMMS devices."
TYPE OPTIONAL
)
endif()
find_package(LIBAD9361)
set_package_properties(LIBAD9361 PROPERTIES
2019-10-12 11:23:57 +00:00
PURPOSE "Used for configuring devices with the AD9361 chipset."
TYPE OPTIONAL
)
if(NOT LIBAD9361_FOUND)
2019-10-09 17:05:31 +00:00
set(ENABLE_AD9361 OFF)
2019-10-10 08:40:37 +00:00
set(ENABLE_FMCOMMS2 OFF)
endif()
if(ENABLE_PLUTOSDR OR ENABLE_FMCOMMS2)
if(NOT GRIIO_FOUND)
message(STATUS "gnuradio-iio not found, its installation is required.")
message(STATUS "Please build and install the following projects:")
message(STATUS " * libiio from https://github.com/analogdevicesinc/libiio")
message(STATUS " * libad9361-iio from https://github.com/analogdevicesinc/libad9361-iio")
message(STATUS " * gnuradio-iio from https://github.com/analogdevicesinc/gr-iio")
if(ENABLE_PACKAGING)
set(ENABLE_PLUTOSDR OFF)
set(ENABLE_FMCOMMS2 OFF)
else()
message(FATAL_ERROR "gnuradio-iio is required for building gnss-sdr with -DENABLE_PLUTOSDR=ON or -DENABLE_FMCOMMS2=ON.")
endif()
endif()
endif()
2019-02-04 17:17:35 +00:00
#####################################################################
2019-02-04 17:17:35 +00:00
# libiio - OPTIONAL
# A library for interfacing with local and remote Linux IIO devices
2019-02-04 21:44:45 +00:00
# https://github.com/analogdevicesinc/libiio
#####################################################################
2019-03-09 00:39:32 +00:00
find_package(LIBIIO)
set_package_properties(LIBIIO PROPERTIES
PURPOSE "Used for communication with the AD9361 chipset."
TYPE OPTIONAL
)
if(ENABLE_AD9361 OR ENABLE_FMCOMMS2)
if(NOT LIBIIO_FOUND)
message(STATUS "libiio not found, its installation is required.")
message(STATUS "Please build and install the following projects:")
message(STATUS " * libiio from https://github.com/analogdevicesinc/libiio")
message(STATUS " * libad9361-iio from https://github.com/analogdevicesinc/libad9361-iio")
message(STATUS " * gnuradio-iio from https://github.com/analogdevicesinc/gr-iio")
if(ENABLE_PACKAGING)
set(ENABLE_AD9361 OFF)
set(ENABLE_FMCOMMS2 OFF)
else()
message(FATAL_ERROR "libiio is required for building gnss-sdr with -DENABLE_AD9361=ON.")
endif()
endif()
endif()
2019-02-04 17:17:35 +00:00
2019-02-04 17:17:35 +00:00
##############################################
# TELEORBIT FLEXIBAND FRONTEND - OPTIONAL
##############################################
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{FLEXIBAND_DRIVER})
2018-11-19 07:51:05 +00:00
message(STATUS "FLEXIBAND_DRIVER environment variable found.")
set(ENABLE_FLEXIBAND ON)
2018-11-24 17:40:34 +00:00
endif()
if(FLEXIBAND_DRIVER)
set(ENABLE_FLEXIBAND ON)
2018-11-24 17:40:34 +00:00
endif()
if(ENABLE_FLEXIBAND)
2018-11-19 07:51:05 +00:00
message(STATUS "The Teleorbit Flexiband front-end source will be compiled.")
message(STATUS " You can disable it with 'cmake -DENABLE_FLEXIBAND=OFF ..'")
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
message(STATUS "The (optional) Teleorbit Flexiband front-end driver adapter is not enabled.")
message(STATUS " Enable it with 'cmake -DENABLE_FLEXIBAND=ON ..' to add support for the Teleorbit Flexiband front-end.")
2018-11-24 17:40:34 +00:00
endif()
2019-03-09 00:39:32 +00:00
find_package(TELEORBIT)
set_package_properties(TELEORBIT PROPERTIES
PURPOSE "Used for communication with the Flexiband front-end."
TYPE OPTIONAL
)
if(ENABLE_FLEXIBAND)
if(NOT TELEORBIT_FOUND)
message(FATAL_ERROR "Teleorbit Flexiband GNU Radio driver required to build gnss-sdr with the optional FLEXIBAND adapter")
endif()
endif()
2019-03-09 00:39:32 +00:00
2019-02-04 17:17:35 +00:00
2019-02-04 21:44:45 +00:00
#######################################################
# CTTC's digital array beamformer prototype - OPTIONAL
#######################################################
2019-04-02 01:31:46 +00:00
if(DEFINED ENV{RAW_ARRAY_DRIVER})
2019-02-04 17:17:35 +00:00
message(STATUS "RAW_ARRAY_DRIVER environment variable found.")
set(ENABLE_ARRAY ON)
endif()
if(RAW_ARRAY_DRIVER)
set(ENABLE_ARRAY ON)
endif()
2019-03-09 00:39:32 +00:00
find_package(GRDBFCTTC QUIET)
set_package_properties(GRDBFCTTC PROPERTIES
URL "https://github.com/gnss-sdr/gr-dbfcttcs"
DESCRIPTION "CTTC's array prototype GNU Radio block."
PURPOSE "Used for communication with CTTC's antenna array."
TYPE OPTIONAL
)
2019-02-04 17:17:35 +00:00
if(ENABLE_ARRAY)
message(STATUS "CTTC's Antenna Array front-end driver will be compiled.")
message(STATUS " You can disable it with 'cmake -DENABLE_ARRAY=OFF ..'")
2019-02-04 17:17:35 +00:00
else()
message(STATUS "The (optional) CTTC's Antenna Array front-end driver is not enabled.")
message(STATUS " Enable it with 'cmake -DENABLE_ARRAY=ON ..' to add support for the CTTC experimental array front-end.")
2018-11-24 17:40:34 +00:00
endif()
2016-11-27 22:47:45 +00:00
################################################################################
2019-02-04 21:44:45 +00:00
# GPerftools - https://github.com/gperftools/gperftools - OPTIONAL)
2016-11-27 22:47:45 +00:00
################################################################################
2019-03-09 00:39:32 +00:00
find_package(GPERFTOOLS)
set_package_properties(GPERFTOOLS PROPERTIES
PURPOSE "Used for performance analysis."
TYPE OPTIONAL
)
2016-11-27 22:47:45 +00:00
if(ENABLE_GPERFTOOLS)
2018-11-19 07:51:05 +00:00
if(NOT GPERFTOOLS_FOUND)
2016-11-27 22:47:45 +00:00
message(STATUS "Although ENABLE_GPERFTOOLS has been set to ON, GPerftools has not been found.")
message(STATUS " Binaries will be compiled without 'tcmalloc' and 'profiler' libraries.")
message(STATUS " You can install GPerftools from https://github.com/gperftools/gperftools")
2018-11-24 17:40:34 +00:00
else()
2018-11-19 07:51:05 +00:00
message(STATUS "GPerftools libraries found.")
message(STATUS " Binaries will be compiled with 'tcmalloc' and 'profiler' libraries.")
2018-11-24 17:40:34 +00:00
endif()
# Set GPerftools related flags if it is available
# See https://github.com/gperftools/gperftools/blob/master/README
if(GPERFTOOLS_FOUND)
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
2019-02-24 13:11:21 +00:00
add_compile_options(-fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free)
2018-11-24 17:40:34 +00:00
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
2019-02-24 13:11:21 +00:00
add_compile_options(-fno-builtin)
2018-11-24 17:40:34 +00:00
endif()
endif()
endif()
2016-11-27 22:47:45 +00:00
################################################################################
2016-11-27 22:47:45 +00:00
# GNU gprof (OPTIONAL) - https://sourceware.org/binutils/docs/gprof/
################################################################################
2015-05-03 08:15:51 +00:00
if(ENABLE_GPROF)
2019-02-24 13:11:21 +00:00
add_compile_options(-pg)
2018-11-19 07:51:05 +00:00
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -pg")
set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -pg")
2018-11-24 17:40:34 +00:00
endif()
2015-05-03 08:15:51 +00:00
2016-11-27 22:47:45 +00:00
################################################################################
2016-11-27 22:47:45 +00:00
# Set compiler flags
################################################################################
2019-08-23 21:18:40 +00:00
set(CXX_WARNING_FLAGS -Wall -Wextra)
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
2019-02-24 13:11:21 +00:00
# Add warning flags
# For "-Wall" see https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
2019-02-24 19:22:15 +00:00
if(NOT (CMAKE_VERSION VERSION_LESS "3.3"))
2019-08-23 21:18:40 +00:00
add_compile_options("$<$<COMPILE_LANGUAGE:CXX>:${CXX_WARNING_FLAGS}>")
2018-11-24 17:40:34 +00:00
else()
2019-08-23 21:18:40 +00:00
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:${CXX_WARNING_FLAGS}>")
2019-02-24 19:22:15 +00:00
endif()
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS "5.0")
add_compile_options(-Wno-missing-field-initializers)
endif()
2019-11-01 18:29:28 +00:00
if(CMAKE_CROSSCOMPILING OR NOT ENABLE_PACKAGING)
2020-08-27 12:57:44 +00:00
if(NOT ENABLE_CUDA)
add_compile_options(-Wno-psabi)
endif()
2018-11-24 17:40:34 +00:00
endif()
2019-11-01 18:29:28 +00:00
if(IS_ARM)
if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER "7.1.0") AND (CMAKE_VERSION VERSION_GREATER "3.1"))
if(CMAKE_CXX_STANDARD VERSION_LESS 17)
set(CXX_ALIGN_FLAG -faligned-new)
if(NOT (CMAKE_VERSION VERSION_LESS "3.3"))
add_compile_options("$<$<COMPILE_LANGUAGE:CXX>:${CXX_ALIGN_FLAG}>")
else()
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:${CXX_ALIGN_FLAG}>")
endif()
2019-11-01 18:35:47 +00:00
endif()
2019-11-01 18:29:28 +00:00
endif()
endif()
2018-11-24 17:40:34 +00:00
endif()
2019-08-23 21:18:40 +00:00
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
if(NOT (CMAKE_VERSION VERSION_LESS "3.3"))
add_compile_options("$<$<COMPILE_LANGUAGE:CXX>:${CXX_WARNING_FLAGS}>")
else()
add_compile_options("$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:${CXX_WARNING_FLAGS}>")
endif()
endif()
2017-08-07 09:08:05 +00:00
2016-11-27 22:47:45 +00:00
# Processor-architecture related flags
# See https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html
2019-02-24 13:11:21 +00:00
if((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") AND NOT WIN32)
2019-11-01 22:05:31 +00:00
if(NOT ENABLE_GENERIC_ARCH)
if(IS_ARM)
# ARM-specific options
# See https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
if(NOT CMAKE_CROSSCOMPILING AND NOT CMAKE_TOOLCHAIN_FILE)
add_compile_options(-mtune=native)
endif()
else()
2020-08-27 12:57:44 +00:00
if(NOT ENABLE_CUDA)
add_compile_options(-march=native)
endif()
2019-11-01 22:05:31 +00:00
endif()
endif()
endif()
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
2019-11-01 18:29:28 +00:00
if(NOT ENABLE_GENERIC_ARCH)
if(IS_ARM)
# ARM-specific options
if(NOT CMAKE_CROSSCOMPILING AND NOT CMAKE_TOOLCHAIN_FILE)
add_compile_options(-mcpu=native)
2019-02-24 13:11:21 +00:00
endif()
else()
add_compile_options(-march=native)
2018-11-24 17:40:34 +00:00
endif()
endif()
endif()
2016-11-27 22:47:45 +00:00
2016-11-27 22:47:45 +00:00
################################################################################
# clang-tidy https://clang.llvm.org/extra/clang-tidy/index.html
################################################################################
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
if(NOT (CMAKE_VERSION VERSION_LESS "3.6"))
find_program(
CLANG_TIDY_EXE
NAMES "clang-tidy"
DOC "Path to clang-tidy executable"
)
if(NOT CLANG_TIDY_EXE)
message(STATUS "clang-tidy not found.")
else()
message(STATUS "clang-tidy found: ${CLANG_TIDY_EXE}")
if(ENABLE_CLANG_TIDY)
message(STATUS " clang-tidy will be used in compilation. You can disable it with 'cmake -DENABLE_CLANG_TIDY=OFF ..'")
else()
message(STATUS " You can enable clang-tidy usage in compilation with 'cmake -DENABLE_CLANG_TIDY=ON ..'")
endif()
set(DO_CLANG_TIDY "${CLANG_TIDY_EXE}" "-fix")
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
endif()
endif()
endif()
################################################################################
# Create uninstall target
################################################################################
configure_file(
${CMAKE_SOURCE_DIR}/cmake/cmake_uninstall.cmake.in
${CMAKE_BINARY_DIR}/cmake_uninstall.cmake
2019-03-23 13:24:49 +00:00
@ONLY
)
add_custom_target(uninstall
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_BINARY_DIR}/cmake_uninstall.cmake
2019-03-23 13:24:49 +00:00
)
2016-11-27 22:47:45 +00:00
################################################################################
2019-03-09 00:39:32 +00:00
# Add subdirectories
################################################################################
add_subdirectory(src)
2019-03-09 00:39:32 +00:00
################################################################################
2019-03-09 00:39:32 +00:00
# Print summary
################################################################################
add_feature_info(ENABLE_UHD ENABLE_UHD "Enables UHD_Signal_Source for using RF front-ends from the USRP family. Requires gr-uhd.")
add_feature_info(ENABLE_OSMOSDR ENABLE_OSMOSDR "Enables Osmosdr_Signal_Source and RtlTcp_Signal_Source for using RF front-ends compatible with the OsmoSDR driver. Requires gr-osmosdr.")
add_feature_info(ENABLE_LIMESDR ENABLE_LIMESDR "Enables Limesdr_Signal_Source. Requires gr-limesdr.")
2019-10-10 08:40:37 +00:00
add_feature_info(ENABLE_FMCOMMS2 ENABLE_FMCOMMS2 "Enables Fmcomms2_Signal_Source for FMCOMMS2/3/4 devices. Requires gr-iio and libad9361-dev.")
add_feature_info(ENABLE_PLUTOSDR ENABLE_PLUTOSDR "Enables Plutosdr_Signal_Source for using ADALM-PLUTO boards. Requires gr-iio.")
2019-10-10 08:40:37 +00:00
add_feature_info(ENABLE_AD9361 ENABLE_AD9361 "Enables Ad9361_Fpga_Signal_Source for devices with the AD9361 chipset. Requires libiio and libad9361-dev.")
add_feature_info(ENABLE_RAW_UDP ENABLE_RAW_UDP "Enables Custom_UDP_Signal_Source for custom UDP packet sample source. Requires libpcap.")
add_feature_info(ENABLE_FLEXIBAND ENABLE_FLEXIBAND "Enables Flexiband_Signal_Source for using Teleorbit's Flexiband RF front-end. Requires gr-teleorbit.")
add_feature_info(ENABLE_ARRAY ENABLE_ARRAY "Enables Raw_Array_Signal_Source and Array_Signal_Conditioner for using CTTC's antenna array. Requires gr-dbfcttc.")
add_feature_info(ENABLE_GPERFTOOLS ENABLE_GPERFTOOLS "Enables performance analysis. Requires Gperftools.")
add_feature_info(ENABLE_GPROF ENABLE_GPROF "Enables performance analysis with 'gprof'.")
add_feature_info(ENABLE_CLANG_TIDY ENABLE_CLANG_TIDY "Runs clang-tidy along with the compiler. Requires Clang.")
add_feature_info(ENABLE_PROFILING ENABLE_PROFILING "Runs volk_gnsssdr_profile at the end of the building.")
add_feature_info(ENABLE_OPENCL ENABLE_OPENCL "Enables GPS_L1_CA_PCPS_OpenCl_Acquisition (experimental). Requires OpenCL.")
add_feature_info(ENABLE_CUDA ENABLE_CUDA "Enables GPS_L1_CA_DLL_PLL_Tracking_GPU (experimental). Requires CUDA.")
2019-08-12 09:53:53 +00:00
add_feature_info(ENABLE_FPGA ENABLE_FPGA "Enables building of processing blocks for FPGA offloading.")
add_feature_info(ENABLE_ARMA_NO_DEBUG ENABLE_ARMA_NO_DEBUG "Enables passing the ARMA_NO_DEBUG macro to Armadillo, hence disabling bound checking.")
add_feature_info(ENABLE_GENERIC_ARCH ENABLE_GENERIC_ARCH "When disabled, flags such as '-march=native' are passed to the compiler.")
add_feature_info(ENABLE_PACKAGING ENABLE_PACKAGING "Enables software packaging.")
add_feature_info(ENABLE_OWN_GLOG ENABLE_OWN_GLOG "Forces the downloading and building of Google glog.")
add_feature_info(ENABLE_OWN_ARMADILLO ENABLE_OWN_ARMADILLO "Forces the downloading and building of Armadillo.")
add_feature_info(ENABLE_LOG ENABLE_LOG "Enables runtime internal logging with Google glog.")
add_feature_info(ENABLE_ORC ENABLE_ORC "Use the Optimized Inner Loop Runtime Compiler (ORC) for building volk_gnsssdr.")
add_feature_info(ENABLE_STRIP ENABLE_STRIP "Enables the generation of stripped binaries (without debugging symbols).")
add_feature_info(ENABLE_UNIT_TESTING ENABLE_UNIT_TESTING "Enables building of Unit Tests.")
add_feature_info(ENABLE_UNIT_TESTING_MINIMAL ENABLE_UNIT_TESTING_MINIMAL "Enables building a minimal set of Unit Tests.")
add_feature_info(ENABLE_UNIT_TESTING_EXTRA ENABLE_UNIT_TESTING_EXTRA "Enables building of Extra Unit Tests and downloading of external data files.")
add_feature_info(ENABLE_SYSTEM_TESTING ENABLE_SYSTEM_TESTING "Enables building of System Tests.")
add_feature_info(ENABLE_SYSTEM_TESTING_EXTRA ENABLE_SYSTEM_TESTING_EXTRA "Enables building of Extra System Tests and downloading of external tools.")
add_feature_info(ENABLE_OWN_GPSTK ENABLE_OWN_GPSTK "Forces the downloading and building of GPSTk for system tests.")
add_feature_info(ENABLE_GNSS_SIM_INSTALL ENABLE_GNSS_SIM_INSTALL "Enables downloading and building of gnss-sim.")
add_feature_info(ENABLE_INSTALL_TESTS ENABLE_INSTALL_TESTS "Install test binaries when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} install'.")
2020-06-21 19:10:22 +00:00
add_feature_info(ENABLE_BENCHMARKS ENABLE_BENCHMARKS "Enables building of code snippet benchmarks.")
add_feature_info(ENABLE_EXTERNAL_MATHJAX ENABLE_EXTERNAL_MATHJAX "Use MathJax from an external CDN in HTML docs when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc'.")
add_feature_info(ENABLE_OWN_CPUFEATURES ENABLE_OWN_CPUFEATURES "Force building own local version of the cpu_features library, even if it is already installed.")
add_feature_info(Boost_USE_STATIC_LIBS Boost_USE_STATIC_LIBS "Use Boost static libraries.")
2019-03-09 22:48:32 +00:00
message(STATUS "")
message(STATUS "***************************************")
message(STATUS "* SUMMARY REPORT *")
message(STATUS "***************************************")
message(STATUS "")
2020-02-03 21:39:52 +00:00
if(CMAKE_CROSSCOMPILING)
message(STATUS "Cross-compiling on ${LINUX_DISTRIBUTION} ${LINUX_VER} (${CMAKE_HOST_SYSTEM_PROCESSOR}) for ${CMAKE_SYSTEM_PROCESSOR} ${ARCHITECTURE_STRING}")
else()
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
message(STATUS "Building on GNU/Linux ${LINUX_DISTRIBUTION} ${LINUX_VER} ${ARCHITECTURE_STRING}")
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
message(STATUS "Building on ${MACOS_DISTRIBUTION}")
endif()
2020-02-03 19:40:10 +00:00
endif()
2020-02-03 22:55:53 +00:00
message(STATUS "CMake version: ${CMAKE_VERSION}")
message(STATUS "The CXX compiler identification is ${CMAKE_CXX_COMPILER_ID} ${CMAKE_CXX_COMPILER_VERSION}. Standard: C++${CMAKE_CXX_STANDARD}.")
message(STATUS "The C compiler identification is ${CMAKE_C_COMPILER_ID} ${CMAKE_C_COMPILER_VERSION}. Standard: C${CMAKE_C_STANDARD}.")
if(CUDA_FOUND)
message(STATUS "The CUDA compiler identification is ${CMAKE_CUDA_COMPILER_ID} ${CMAKE_CUDA_COMPILER_VERSION}. Standard: C++${CMAKE_CUDA_STANDARD}.")
endif()
2020-02-03 19:40:10 +00:00
message(STATUS "")
file(REMOVE ${CMAKE_BINARY_DIR}/features.log)
file(WRITE ${CMAKE_BINARY_DIR}/features.log "**********************************\n")
file(APPEND ${CMAKE_BINARY_DIR}/features.log "* BUILDING CONFIGURATION SUMMARY *\n")
file(APPEND ${CMAKE_BINARY_DIR}/features.log "**********************************\n\n")
file(APPEND ${CMAKE_BINARY_DIR}/features.log "GNSS-SDR version: ${VERSION}\n")
2020-02-03 19:40:10 +00:00
if(${CMAKE_SYSTEM_NAME} MATCHES "Linux|kFreeBSD|GNU")
2020-02-03 21:50:56 +00:00
if(CMAKE_CROSSCOMPILING)
file(APPEND ${CMAKE_BINARY_DIR}/features.log "Cross-compiling on ${LINUX_DISTRIBUTION} ${LINUX_VER} (${CMAKE_HOST_SYSTEM_PROCESSOR}) for ${CMAKE_SYSTEM_PROCESSOR} ${ARCHITECTURE_STRING}\n")
2020-02-03 21:50:56 +00:00
else()
file(APPEND ${CMAKE_BINARY_DIR}/features.log "Building on GNU/Linux ${LINUX_DISTRIBUTION} ${LINUX_VER} ${ARCHITECTURE_STRING}\n")
2020-02-03 21:50:56 +00:00
endif()
2020-02-03 19:40:10 +00:00
endif()
if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
file(APPEND ${CMAKE_BINARY_DIR}/features.log "Building on ${MACOS_DISTRIBUTION}\n")
2020-02-03 19:40:10 +00:00
endif()
file(APPEND ${CMAKE_BINARY_DIR}/features.log "CMake version: ${CMAKE_VERSION}\n")
file(APPEND ${CMAKE_BINARY_DIR}/features.log "The CXX compiler identification is ${CMAKE_CXX_COMPILER_ID} ${CMAKE_CXX_COMPILER_VERSION}. Standard: C++${CMAKE_CXX_STANDARD}.\n")
file(APPEND ${CMAKE_BINARY_DIR}/features.log "The C compiler identification is ${CMAKE_C_COMPILER_ID} ${CMAKE_C_COMPILER_VERSION}. Standard: C${CMAKE_C_STANDARD}.\n\n")
2019-03-09 22:48:32 +00:00
if(CMAKE_VERSION VERSION_LESS 3.4)
feature_summary(WHAT ALL)
feature_summary(FILENAME ${CMAKE_BINARY_DIR}/features.log APPEND WHAT ALL)
2019-03-09 22:48:32 +00:00
else()
feature_summary(WHAT
REQUIRED_PACKAGES_FOUND
REQUIRED_PACKAGES_NOT_FOUND
OPTIONAL_PACKAGES_FOUND
OPTIONAL_PACKAGES_NOT_FOUND
2019-04-02 00:41:20 +00:00
ENABLED_FEATURES
DISABLED_FEATURES
)
feature_summary(FILENAME ${CMAKE_BINARY_DIR}/features.log APPEND WHAT
REQUIRED_PACKAGES_FOUND
REQUIRED_PACKAGES_NOT_FOUND
OPTIONAL_PACKAGES_FOUND
OPTIONAL_PACKAGES_NOT_FOUND
2019-04-02 00:41:20 +00:00
ENABLED_FEATURES
DISABLED_FEATURES
)
2019-03-09 00:39:32 +00:00
endif()
2019-03-10 19:08:49 +00:00
message(STATUS "GNSS-SDR v${VERSION} is ready to be built.")