This is simply exposed as a table from tag -> true. While this is less
natural than an array, it allows for easy esting of whether a tag is
present.
Closes#461
- Use texture over texture2D - the latter was deprecated in GLSL 1.30.
- Cache the tbo buffer - this saves an allocation when monitors update.
Closes#455. While the rest of the PR has some nice changes, it
performs signlificantly worse on my system.
This moves monitor networking into its own packet, rather than serialising
using NBT. This allows us to be more flexible with how monitors are
serialised.
We now compress terminal data using gzip. This reduces the packet size
of a max-sized-monitor from ~25kb to as little as 100b.
On my test set of images (what I would consider to be the extreme end of
the "reasonable" case), we have packets from 1.4kb bytes up to 12kb,
with a mean of 6kb. Even in the worst case, this is a 2x reduction in
packet size.
While this is a fantastic win for the common case, it is not abuse-proof.
One can create a terminal with high entropy (and so uncompressible). This
will still be close to the original packet size.
In order to prevent any other abuse, we also limit the amount of monitor
data a client can possibly receive to 1MB (configurable).
timetout, max_upload, max_download and max_websocket_message may now be
configured on a domain-by-domain basis. This uses the same system that
we use for the block/allow-list from before:
Example:
[[http.rules]]
host = "*"
action = "allow"
max_upload = 4194304
max_download = 16777216
timeout = 30000
This registers IPeripheral as a capability. As a result, all (Minecraft
facing) functionality operates using LazyOptional<_>s instead.
Peripheral providers should now return a LazyOptional<IPeripheral> too.
Hopefully this will allow custom peripherals to mark themselves as
invalid (say, because a dependency has changed).
While peripheral providers are somewhat redundant, they still have their
usages. If a peripheral is applied to a large number of blocks (for
instance, all inventories) then using capabilities does incur some
memory overhead.
We also make the following changes based on the above:
- Remove the default implementation for IWiredElement, migrating the
definition to a common "Capabilities" class.
- Remove IPeripheralTile - we'll exclusively use capabilities now.
Absurdly this is the most complex change, as all TEs needed to be
migrated too.
I'm not 100% sure of the correctness of this changes so far - I've
tested it pretty well, but blocks with more complex peripheral logic
(wired/wireless modems and turtles) are still a little messy.
- Remove the "command block" peripheral provider, attaching a
capability instead.
When creating a peripheral or custom Lua object, one must implement two
methods:
- getMethodNames(): String[] - Returns the name of the methods
- callMethod(int, ...): Object[] - Invokes the method using an index in
the above array.
This has a couple of problems:
- It's somewhat unwieldy to use - you need to keep track of array
indices, which leads to ugly code.
- Functions which yield (for instance, those which run on the main
thread) are blocking. This means we need to spawn new threads for
each CC-side yield.
We replace this system with a few changes:
- @LuaFunction annotation: One may annotate a public instance method
with this annotation. This then exposes a peripheral/lua object
method.
Furthermore, this method can accept and return a variety of types,
which often makes functions cleaner (e.g. can return an int rather
than an Object[], and specify and int argument rather than
Object[]).
- MethodResult: Instead of returning an Object[] and having blocking
yields, functions return a MethodResult. This either contains an
immediate return, or an instruction to yield with some continuation
to resume with.
MethodResult is then interpreted by the Lua runtime (i.e. Cobalt),
rather than our weird bodgey hacks before. This means we no longer
spawn new threads when yielding within CC.
- Methods accept IArguments instead of a raw Object array. This has a
few benefits:
- Consistent argument handling - people no longer need to use
ArgumentHelper (as it doesn't exist!), or even be aware of its
existence - you're rather forced into using it.
- More efficient code in some cases. We provide a Cobalt-specific
implementation of IArguments, which avoids the boxing/unboxing when
handling numbers and binary strings.
- cc.pretty.pretty now accepts two additional options:
- function_args: Show function arguments
- function_source: Show where functions are defined.
- Expose the two options as lua.* settings (defaulting function_args to
true, and function_source to false).
These are then used in the Lua REPL.
Closes#361
`local varname = value` results in `varname` being inaccessible in
the next REPL input. This is often unintended and can lead to confusing
behaviour. We produce a warning when this occurs.
This uses the system described in #409, to render monitors in a more
efficient manner.
Each monitor is backed by a texture buffer object (TBO) which contains
a relatively compact encoding of the terminal state. This is then
rendered using a shader, which consumes the TBO and uses it to index
into main font texture.
As we're transmitting significantly less data to the GPU (only 3 bytes
per character), this effectively reduces any update lag to 0. FPS appears
to be up by a small fraction (10-15fps on my machine, to ~110), possibly
as we're now only drawing a single quad (though doing much more work in
the shader).
On my laptop, with its Intel integrated graphics card, I'm able to draw
120 full-sized monitors (with an effective resolution of 3972 x 2330) at
a consistent 60fps. Updates still cause a slight spike, but we always
remain above 30fps - a significant improvement over VBOs, where updates
would go off the chart.
Many thanks to @Lignum and @Lemmmy for devising this scheme, and helping
test and review it! ♥
Unknown blit colours, such as " " will be translated to black for the
background or white for the foreground. This restores the behaviour from
before #412.
- Write to a PacketBuffer instead of generating an NBT tag. This is
then converted to an NBT byte array when we send across the network.
- Pack background/foreground colours into a single byte.
This derives from some work I did back in 2017, and some of the changes
made/planned in #409. However, this patch does not change how terminals
are represented, it simply makes the transfer more compact.
This makes the patch incredibly small (100 lines!), but also limited in
what improvements it can make compared with #409. We send 26626 bytes
for a full-sized monitor. While a 2x improvement over the previous 58558
bytes, there's a lot of room for improvement.
This functions the same as shell.run, but does not tokenise the
arguments. This allows us to pass command line arguments through to
another program without having to re-quote them.
Closes#417
- Remove the parenthesis around the text (so it's now
"Computer ID: 12"), rather than "(Computer ID: 12").
- Show the tooltip if the computer has an ID and no label (as well as
when in advanced mode).
- Lint references to unknown fields of modules, excluding the keys and
colours modules. This caught several silly errors in our stub files,
but nothing else.
- Lint on using unknown globals. This highlighted a couple of really
silly mistakes. Fixes#427.
- Add documentation for fs.attributes, fs.getCapacity and pocket, as
they were not defined before.
Co-authored-by: JackMacWindows <jackmacwindowslinux@gmail.com>
- I'm excluding pocket computers, as they have such a tiny screen I'm
not sure the screen estate is worth it.
Pocket computers /generally/ aren't people's starter machine, so I
think this is fine.
- Prune the motd list, and try to make them a little shorter. I think
this list is more of the interesting ones. We can modify this list in
the future, as we get more feedback.[^1]
- Also fix paint/edit not adding an extension when they should. This
was caused by the settings rewrite, as the explicitly provided
default shadowed the one provided by bios.lua.
[^1]: ~5 months ago I asked for some feedback about enabling motds by
default. I only got something constructive back today >_>.
This replaces the allow/block lists with a series of rules. Each rule
takes the form
[[http.rules]]
host = "127.0.0.0/8"
action = "block"
This is pretty much the same as the previous config style, in that hosts
may be domains, wildcards or in CIDR notation. However, they may also be
mixed, so you could allow a specific IP, and then block all others.
- The store is now split into two sections:
- A list of possible options, with some metadata about them.
- A list of values which have been changed.
- settings.define can be used to register a new option. We have
migrated all existing options over to use it. This can be used to
define a default value, description, and a type the setting must have
(such as `string` or `boolean).
- settings.{set,unset,clear,load,store} operate using this value list.
This means that only values which have been changed are stored to
disk.
Furthermore, clearing/unsetting will reset to the /default/ value,
rather than removing entirely.
- The set program will now display descriptions.
- settings.{load,save} now default to `.settings` if no path is given.
This is a backport of 1.15's terminal rendering code with some further
improvements. This duplicates a fair bit of code, and is much more
efficient.
I expect the work done in #409 will supersede this, but that's unlikely
to make its way into the next release so it's worth getting this in for
now.
- Refactor a lot of common terminal code into
`FixedWithFontRenderer`. This shouldn't change any behaviour, but
makes a lot of our terminal renderers (printed pages, terminals,
monitors) a lot cleaner.
- Terminal rendering is done using a single mode/vertex format. Rather
than drawing an untextured quad for the background colours, we use an
entirely white piece of the terminal font. This allows us to batch
draws together more elegantly.
- Some minor optimisations:
- Skip rendering `"\0"` and `" "` characters. These characters occur
pretty often, especially on blank monitors and, as the font is empty
here, it is safe to skip them.
- Batch together adjacent background cells of the same colour. Again,
most terminals will have large runs of the same colour, so this is a
worthwhile optimisation.
These optimisations do mean that terminal performance is no longer
consistent as "noisy" terminals will have worse performance. This is
annoying, but still worthwhile.
- Switch monitor rendering over to use VBOs.
We also add a config option to switch between rendering backends. By
default we'll choose the best one compatible with your GPU, but there
is a config option to switch between VBOS (reasonable performance) and
display lists (bad).
When benchmarking 30 full-sized monitors rendering a static image, this
improves my FPS[^1] from 7 to 95. This is obviously an extreme case -
monitor updates are still slow, and so more frequently updating screens
will still be less than stellar.
[^1]: My graphics card is an Intel HD Graphics 520. Obviously numbers
will vary.
This would return true for any block with a fluid in it, including
waterlogged blocks. This resulted in much broken behaviour
- Turtles cannot place blocks when waterlogged (fixedd #385)
- Turtles could move into waterlogged blocks (such as fences),
replacing them.
This is relatively unoptimised right now, but should be efficient enough
for most practical applications.
- Add textutils.json_null. This will be serialized into a literal
`null`. When deserializing, and parse_null is true, this will be
returned instead of a nil.
- Add textutils.unserializeJSON (and textutils.unserializeJSON). This
is a standard compliant JSON parser (hopefully).
- Passing in nbt_style to textutils.unserializeJSON will handle
stringified NBT (no quotes around object keys, numeric suffices). We
don't currently support byte/long/int arrays - something to add in
a future commit.
- Remove stub for table.pack/table.unpack.
- Remove Lua 5.3 bitlib stub. We're not on 5.3, there's no
point emulating it.
- Change peripheral.call to correctly adjust the error level. This is a
terrible hack, but I believe the only good option.
It'd be good to remove load as well, but it's a little more complex due
to our injecting of _ENV.
Closes#363
It hasn't been http_enable for yonks - slightly worried I didn't notice
this earlier.
Also don't refer to ComputerCraft.cfg - the name has changed several
times across versions, so let's leave it ambiguous.
- Return EPOCH if a zip entry's creation/modification/access time is
missing.
- If a BasicFileAttributes.*Time method returns null, use 0 as our
time. This shouldn't happen, but is a good sanity check.
Fixes#371
This adds documentation comments to many of CC's Lua APIs, and
a couple of the Java ones, through the use of stubs. We then
export these to HTML using illuaminate [1] and upload them to our
documentation site [2].
Uploads currently occur on pushes to master and any release/tag. The
site is entirely static - there is no way to switch between versions,
etc... but hopefully we can improve this in the future.
[1]: github.com/SquidDev/illuaminate/
[2]: https://tweaked.cc/
This means we are already provided with file attributes, which halfs[^1]
the time taken to scan folders.
[^1]: This dropped the fastest scan time from ~1.3s to ~0.6. It's by no
means a perfect benchmark, but this is still an obvious improvement.
- fs.getCapacity just returns the capacity of the current drive, if
available. This will be nil on rom mounts.
- fs.attributes returns an lfs like table of various file attributes.
Currently, this contains:
- access, modification, created: When this file was last accessed,
modified and created. Time is measured in milliseconds since the
epoch, same as os.epoch("utc") and what is accepted by os.date.
- size: Same as fs.getSize
- isDir: same as fs.isDir
Closes#262
- Move timer handling to IAPIEnvironment, rather than OSAPI. This means
the environment is reset on startup/shutdown, much like normal APIs.
- Websocket.receive now accepts an optional timetout (much like
rednet.receive). This starts a timer, and waits for it to complete.
Closes#201
- contains now performs a case-insensitive comparison. While this is a
little dubious, it's required for systems like Windows, where foo and
Foo are the same folder.
- Impose a depth limit on copyRecursive. If there are any other cases
where we may try to copy a folder into itself, this should prevent
the computer entirely crashing.
See #354
- Remove Lua script to generate recipes/advancements for coloured
disks, turtle upgrades and pocket upgrades. Replacing them with Lua
ones.
- Generate most block drops via the data generator system. Aside from
cables, they all follow one of two templates.
- Remove *Stream methods on IMount/IWritableMount, and make the channel
ones the primary.
- Fix location of AbstractTurtleUpgrade
- Make IComputerAccess.getAvailablePeripheral and .getMainThreadMonitor
mandatory.
- IComputerAccess throws a specialised NotAttachedException
Most of the port is pretty simple. The main problems are regarding
changes to Minecraft's rendering system.
- Remove several rendering tweaks until Forge's compatibility it
brought up-to-date
- Map rendering for pocket computers and printouts
- Item frame rendering for printouts
- Custom block outlines for monitors and cables/wired modems
- Custom breaking progress for cables/wired modems
- Turtle "Dinnerbone" rendering is currently broken, as normals are not
correctly transformed.
- Rewrite FixedWidthFontRenderer to to the buffer in a single sweep.
In order to do this, the term_font now also bundles a "background"
section, which is just a blank region of the screen.
- Render monitors using a VBO instead of a call list. I haven't
compared performance yet, but it manages to render a 6x5 array of
_static_ monitors at almost 60fps, which seems pretty reasonable.
- Add a cc.pretty module, which provides a Wadler style pretty printer [1].
- The cc.pretty.pretty function converts an arbitrary object into a
pretty-printed document. This can then be printed to the screen with
cc.pretty.{write, print} or converted to a string with cc.pretty.render.
- Convert the Lua REPL to use the pretty printer rather than
textutils.serialise.
[1]: http://homepages.inf.ed.ac.uk/wadler/papers/prettier/prettier.pdf
GPS requests are now sent and received on CHANNEL_GPS by default
instead. This means it should not be possible to distinguish
computers (and thus locate them) via their GPS requests.
"exit" now has a custom __tostring method, which prints an explanation
message. This is very similar to how Python achives the same
functionality:
lua> exit
Call exit() to exit
lua> exit()
> Actually leaves the REPL
Unfortunately we can't apply the config changes due to backwards
compatibility. This'll be something we may need to PR into Forge.
CraftTweaker support still needs to be added.
It appears that WB opens containers manually, and thus all of our stubs
network stubs are entirely ignored. Thus the only solution here is to
stub out the whole network handler code.
Thankfully this is simple enough - we do the same for Plethora and 1.14.
Fixes#328
This provides the following methods:
- dan200.computercraft.turtle.removeUpgrade(id: String)
- dan200.computercraft.turtle.removeUpgrade(stack: IItemStack)
- dan200.computercraft.turtle.addTool(id: String, craftItem: IItemStack[, toolItem: IItemStack][, kind: string])
While it's pretty minimal, it should allow for a reasonable amount of
functionality.
Closes#327 and #97.
We now use illuaminate[1]'s linting facilities to check the rom and
bios.lua for a couple of common bugs and other problems.
Right now this doesn't detect any especially important bugs, though it
has caught lots of small things (unused variables, some noisy code). In
the future, the linter will grow in scope and features, which should
allow us to be stricter and catch most issues.
As a fun aside, we started off with ~150 bugs, and illuaminate was able
to fix all but 30 of them, which is pretty neat.
[1]: https://github.com/SquidDev/illuaminate
