This is an attempt to enforce better separation between ComputerThread
and ComputerExecutor. Both of these classes are pretty complex in their
own right, and the way the two bleed into each other makes it all the
more confusing!
This effectively splits the ComputerExecutor into two separate classes:
- ComputerScheduler.Executor (with the actual implementation inside
ComputerThread): This holds all the ComputerThread-related logic
which used to be in ComputerExecutor, including:
- before/after work hooks
- is-on-thread tracking
- virtual runtime computation
- ComputerScheduler.Worker: This encapsulates all the computer-related
behaviour. The actual implementation remains in ComputerExecutor.
The boundaries are still a little fuzzy here, and it's all definitely
more coupled then I'd like, but still an improvement!
There are several additional changes at the same time:
- TimeoutState has also been split up, to better define the boundary
between consumers (such as ComputerExecutor and ILuaMachine) and
controllers (ComputerThread).
The getters still live in TimeoutState, but the core logic lives in
ManagedTimeoutState.
- We no longer track cumulative time in the TimeoutState. Instead, we
allow varying the timeout of a computer. When a computer is paused,
we store the remaining time, and restore it when resuming again.
This also allows us give a longer timeout for computer
startup/shutdown, hopefully avoiding some of those class-not-found
issues we've seen.
- We try to make the state machine of how ComputerExecutors live on the
queue a little more explicit. This is very messy/confusing -
something I want to property test in the future.
I'm sure there's more to be done here, especially in ComputerExecutor,
but hopefully this makes future changes a little less intimidating.
Historically we've used copy-cat to provide a web-based emulator for
running example code on our documentation site. However, copy-cat is
often out-of-date with CC:T, which means example snippets fail when you
try to run them!
This commit vendors in copy-cat (or rather an updated version of it)
into CC:T itself, allowing us to ensure the emulator is always in sync
with the mod.
While the ARCHITECTURE.md documentation goes into a little bit more
detail here, the general implementation is as follows
- In project/src/main we implement the core of the emulator. This
includes a basic reimplementation of some of CC's classes to work on
the web (mostly the HTTP API and ComputerThread), and some additional
code to expose the computers to Javascript.
- This is all then compiled to Javascript using [TeaVM][1] (we actually
use a [personal fork of it][2] as there's a couple of changes I've
not upstreamed yet).
- The Javascript side then pulls in the these compiled classes (and
the CC ROM) and hooks them up to [cc-web-term][3] to display the
actual computer.
- As we're no longer pulling in copy-cat, we can simplify our bundling
system a little - we now just compile to ESM modules directly.
[1]: https://github.com/konsoletyper/teavm
[2]: https://github.com/SquidDev/teavm/tree/squid-patches
[3]: https://github.com/squiddev-cc/cc-web-term
- Fix several inaccuracies with several files not marking Dan's
authorship. Most of these are new files, where the code was moved from
somewhere else:
- In the public API: IDynamicLuaObject, ILuaAPI, TaskCallbakc,
IDynamicPeripheral, UpgradeBase
- In the ROM: fs, http, require
- Do not mark Dan as an author for entirely new code. This affects
DetailHelpers, DropConsumer, FluidData, InventoryMethods, ItemDetails,
MonitorRenderState, NoTermComputerScreen, Palette, PlatformHelperImpl,
UploadFileMessage, the Terminal tests, and any speaker-related files.
- Relicence many files under the MPL where we have permission to do
so. See #1339 for further details.
Thank you to everyone who has contributed so far! Cannot overstate how
appreciated it is <3.
This adds SPDX license headers to all source code files, following the
REUSE[1] specification. This does not include any asset files (such as
generated JSON files, or textures). While REUSE does support doing so
with ".license" files, for now we define these licences using the
.reuse/dep5 file.
[1]: https://reuse.software/
We'll do this everywhere eventually, but much easier to do it
incrementally:
- Use checker framework to default all field/methods/parameters to
@Nonnull.
- Start using ErrorProne[1] and NullAway[2] to check for possible null
pointer issues. I did look into using CheckerFramework, but it's much
stricter (i.e. it's actually Correct). This is technically good, but
is a much steeper migration path, which I'm not sure we're prepared
for yet!
[1]: https://github.com/google/error-prone
[2]: https://github.com/uber/NullAway
- Switch to a fairly standard code format. This is largely based on
IntelliJ defaults, with some minor tweaks applied via editor config.
Should mean people don't need to import a config!
- Use "var" everywhere instead of explicit types. Type inference is a
joy, and I intend to use it to its fullest.
- Start using switch expressions: we couldn't use them before because
IntelliJ does silly things with our previous brace style, but now we
have the luxury of them!
This is a noisier diff than I'd like as this is just a direct copy from
the multi-loader branch.
- Rename "ingame" package to "gametest"
- Don't chain GameTestSequence methods - it's actually much cleaner if
we just use Kotlin's implicit this syntax.
- Use our work in 71f81e1201 to write
computer tests using Kotlin instead of Lua. This means all the logic
is in one place, which is nice!
- Add a couple more tests for some of the more error-prone bits of
functionality.
Previously illumainate required manual users to manually download it and
place it in ./bin/. This is both inconvenient for the user, and makes it
hard to ensure people are running the "right" version.
We now provide a small Gradle plugin which registers illuaminate as a
ependency, downloading the appropriate (now versioned!) file. This also
theoretically supports Macs, though I don't have access to one to test
this.
This enables the following changes:
- The Lua lint script has been converted to a Gradle task (./gradle
lintLua).
- illuaminateDocs now uses a task definition with an explicit output
directory. We can now consume this output as an input to another
task, and get a task dependency implicitly.
- Move the pre-commit config into the root of the tree. We can now use
the default GitHub action to run our hooks.
- Simplify CONTRIBUTING.md a little bit. Hopefully it's less
intimidating now.
- Add a basic data exporter to the test mod, run via a /ccexport
command. This dumps all of CC's recipes, and the item icons needed to
display those recipes.
- Post-process our illuaminate HTML, applying several transforms:
- Apply syntax highlighting to code blocks. We previously did this
at runtime, so this shaves some bytes off the bundle.
- Convert a mc-recipe custom element into a recipe grid using
react/react-dom.
- Add a recipe to the speaker page. I'll probably clean this up in the
future (though someone else is free to too!), but it's a nice
start and proof-of-concept.
I tried so hard here to use next.js and MDX instead of rolling our own
solution again, but it's so hard to make it play well with "normal"
Markdown, which isn't explicitly written for MDX.
- Move TaskCallback into the API and make it package private. This
effectively means it's not an API class, just exists there for
convenience reasons.
- Replace any usage of TaskCallback.make with
ILuaContext.executeMainThreadTask.
- Some minor formatting/checkstyle changes to bring us inline with
IntelliJ config.
- Remap everything to use MojMap class names too. This is what Forge
uses, so \o/.
This does NOT currently rename any classes to use suffix notation or
BlockEntity. That will come in a later change. We do however rename
references of "World" to "Level".
- Move the test mod into a separate "cctest" source set. As Forge now
works using Jigsaw we cannot have multiple mods defining the same
package, which causes problems with our JUnit test classes.
- Remove our custom test framework and replace it with vanilla's (this
is no longer stripped from the jar). RIP kotlin coroutines.
It's still worth using Kotlin here though, just for extension
methods.
- Other 1.17-related changes:
- Use separate tile/block entity tick methods for server and client
side, often avoiding ticking at all on the client.
- Switch much of the monitor rendering code to use vanilla's
built-in shader system. It's still an incredibly ugly hack, so not
really expecting this to work with any rendering mods, but we'll
cross that bridge when we come to it.
- Add a basic problem matcher for illuaminate errors.
- Add a script (tools/parse-reports.py) which parses the XML reports
generated by checkstyle and junit, extracts source locations, and
emits them in a manner which can be consumed by another set of
matchers.
This should make it a little easier to see problems for folks who just
rely on CI to test things (though also, please don't do this if you can
help it).
This uses pre-commit [1] to check patches are well formed and run
several linters on them. We currently do some boring things (check files
are syntactically valid) as well as some project-specific ones:
- Run illuaminate on the Lua files
- Run checkstyle on Java
[1]: https://pre-commit.com/
illuaminate does not handle Java files, for obvious reasons. In order to
get around that, we have a series of stub files within /doc/stub which
mirrored the Java ones. While this works, it has a few problems:
- The link to source code does not work - it just links to the stub
file.
- There's no guarantee that documentation remains consistent with the
Java code. This change found several methods which were incorrectly
documented beforehand.
We now replace this with a custom Java doclet[1], which extracts doc
comments from @LuaFunction annotated methods and generates stub-files
from them. These also contain a @source annotation, which allows us to
correctly link them back to the original Java code.
There's some issues with this which have yet to be fixed. However, I
don't think any of them are major blockers right now:
- The custom doclet relies on Java 9 - I think it's /technically/
possible to do this on Java 8, but the API is significantly uglier.
This means that we need to run javadoc on a separate JVM.
This is possible, and it works locally and on CI, but is definitely
not a nice approach.
- illuaminate now requires the doc stubs to be generated in order for
the linter to pass, which does make running the linter locally much
harder (especially given the above bullet point).
We could notionally include the generated stubs (or at least a cut
down version of them) in the repo, but I'm not 100% sure about that.
[1]: https://docs.oracle.com/javase/9/docs/api/jdk/javadoc/doclet/package-summary.html
This registers IPeripheral as a capability. As a result, all (Minecraft
facing) functionality operates using LazyOptional<_>s instead.
Peripheral providers should now return a LazyOptional<IPeripheral> too.
Hopefully this will allow custom peripherals to mark themselves as
invalid (say, because a dependency has changed).
While peripheral providers are somewhat redundant, they still have their
usages. If a peripheral is applied to a large number of blocks (for
instance, all inventories) then using capabilities does incur some
memory overhead.
We also make the following changes based on the above:
- Remove the default implementation for IWiredElement, migrating the
definition to a common "Capabilities" class.
- Remove IPeripheralTile - we'll exclusively use capabilities now.
Absurdly this is the most complex change, as all TEs needed to be
migrated too.
I'm not 100% sure of the correctness of this changes so far - I've
tested it pretty well, but blocks with more complex peripheral logic
(wired/wireless modems and turtles) are still a little messy.
- Remove the "command block" peripheral provider, attaching a
capability instead.
Most of the port is pretty simple. The main problems are regarding
changes to Minecraft's rendering system.
- Remove several rendering tweaks until Forge's compatibility it
brought up-to-date
- Map rendering for pocket computers and printouts
- Item frame rendering for printouts
- Custom block outlines for monitors and cables/wired modems
- Custom breaking progress for cables/wired modems
- Turtle "Dinnerbone" rendering is currently broken, as normals are not
correctly transformed.
- Rewrite FixedWidthFontRenderer to to the buffer in a single sweep.
In order to do this, the term_font now also bundles a "background"
section, which is just a blank region of the screen.
- Render monitors using a VBO instead of a call list. I haven't
compared performance yet, but it manages to render a 6x5 array of
_static_ monitors at almost 60fps, which seems pretty reasonable.
- Adds a CheckStyle configuration which is pretty similar to CC's
existing one.
- Add the Gradle license plugin.
- Ensure the existing source code is compatible with these additional
checks.
See #239
