2019-02-03 18:24:44 +00:00
# Copyright (C) 2010-2019 (see AUTHORS file for a list of contributors)
2012-12-24 02:33:50 +00:00
#
# This file is part of GNSS-SDR.
#
# GNSS-SDR is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
2014-06-30 18:46:36 +00:00
# (at your option) any later version.
2012-12-24 02:33:50 +00:00
#
# GNSS-SDR is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
2018-05-13 20:49:11 +00:00
# along with GNSS-SDR. If not, see <https://www.gnu.org/licenses/>.
2012-12-24 02:33:50 +00:00
#
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
########################################################################
# Project setup
2012-12-24 02:33:50 +00:00
########################################################################
if ( ${ CMAKE_SOURCE_DIR } STREQUAL ${ CMAKE_BINARY_DIR } )
2015-03-20 14:23:16 +00:00
message ( WARNING "In-tree build is bad practice. Try 'cd build && cmake ../' " )
2018-11-24 17:40:34 +00:00
endif ( )
2017-08-07 17:29:05 +00:00
2019-01-31 11:12:04 +00:00
cmake_minimum_required ( VERSION 2.8.12 )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
project ( gnss-sdr CXX C )
list ( APPEND CMAKE_MODULE_PATH ${ CMAKE_SOURCE_DIR } /cmake/Modules )
file ( RELATIVE_PATH RELATIVE_CMAKE_CALL ${ CMAKE_CURRENT_BINARY_DIR } ${ CMAKE_CURRENT_SOURCE_DIR } )
2014-09-30 23:09:44 +00:00
2016-10-25 11:01:20 +00:00
if ( NOT CMAKE_PREFIX_PATH )
if ( DEFINED ENV{PYBOMBS_PREFIX} )
set ( CMAKE_PREFIX_PATH $ENV{ PYBOMBS_PREFIX } )
2018-11-24 17:40:34 +00:00
endif ( )
2016-10-25 11:01:20 +00:00
if ( DEFINED ENV{SNAP} )
set ( CMAKE_PREFIX_PATH $ENV{ SNAP } )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2012-12-24 02:33:50 +00:00
2016-11-27 22:47:45 +00:00
2012-12-24 02:33:50 +00:00
########################################################################
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
# Determine optional blocks/libraries to be built (default: not built)
2019-02-21 08:59:06 +00:00
# Enable them at the command line by doing 'cmake -DENABLE_XXX=ON ..'
2012-12-24 02:33:50 +00:00
########################################################################
2015-05-03 08:15:51 +00:00
# Support of optional RF front-ends
2018-03-26 17:23:43 +00:00
option ( ENABLE_UHD "Enable the use of UHD (driver for all USRP devices)" ON )
2018-10-03 14:57:06 +00:00
option ( ENABLE_OSMOSDR "Enable the use of OsmoSDR and other front-ends (RTL-based dongles, HackRF, bladeRF, etc.) as signal source" OFF )
2015-05-03 08:15:51 +00:00
option ( ENABLE_FLEXIBAND "Enable the use of the signal source adater for the Teleorbit Flexiband GNURadio driver" OFF )
option ( ENABLE_ARRAY "Enable the use of CTTC's antenna array front-end as signal source (experimental)" OFF )
option ( ENABLE_GN3S "Enable the use of the GN3S dongle as signal source (experimental)" OFF )
2017-10-30 21:31:20 +00:00
option ( ENABLE_PLUTOSDR "Enable the use of ADALM-PLUTO Evaluation Boards (Analog Devices Inc.), requires gr-iio" OFF )
2017-10-31 14:40:14 +00:00
option ( ENABLE_FMCOMMS2 "Enable the use of FMCOMMS4-EBZ + ZedBoard hardware, requires gr-iio" OFF )
2018-05-16 19:33:52 +00:00
option ( ENABLE_AD9361 "Enable the use of AD9361 directo to FPGA hardware, requires libiio" OFF )
2018-05-16 09:36:37 +00:00
option ( ENABLE_RAW_UDP "Enable the use of high-optimized custom UDP packet sample source, requires libpcap" OFF )
2015-05-03 08:15:51 +00:00
# Performance analysis tools
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
option ( ENABLE_GPERFTOOLS "Enable linking to Gperftools libraries (tcmalloc and profiler)" OFF )
2015-05-03 08:15:51 +00:00
option ( ENABLE_GPROF "Enable the use of the GNU profiler tool 'gprof'" OFF )
2019-02-21 08:59:06 +00:00
# Code correctness
option ( ENABLE_CLANG_TIDY "Enable the use of clang-tidy when compiling" OFF )
2015-05-03 08:15:51 +00:00
# Acceleration
2016-07-02 16:54:39 +00:00
option ( ENABLE_PROFILING "Enable execution of volk_gnsssdr_profile at the end of the building" OFF )
2015-05-03 08:15:51 +00:00
option ( ENABLE_OPENCL "Enable building of processing blocks implemented with OpenCL (experimental)" OFF )
2015-08-25 17:01:02 +00:00
option ( ENABLE_CUDA "Enable building of processing blocks implemented with CUDA (experimental, requires CUDA SDK)" OFF )
2017-02-13 16:20:49 +00:00
option ( ENABLE_FPGA "Enable building of processing blocks implemented with FPGA (experimental, requires EZDMA driver)" OFF )
2015-05-03 08:15:51 +00:00
# Building and packaging options
2014-09-07 17:35:41 +00:00
option ( ENABLE_GENERIC_ARCH "Builds a portable binary" OFF )
2014-11-11 22:50:38 +00:00
option ( ENABLE_PACKAGING "Enable software packaging" OFF )
2014-11-14 00:40:43 +00:00
option ( ENABLE_OWN_GLOG "Download glog and link it to gflags" OFF )
2017-02-03 11:04:15 +00:00
option ( ENABLE_OWN_ARMADILLO "Download and build Armadillo locally" OFF )
2015-05-23 09:20:26 +00:00
option ( ENABLE_LOG "Enable logging" ON )
2014-11-14 00:40:43 +00:00
if ( ENABLE_PACKAGING )
2014-11-11 22:50:38 +00:00
set ( ENABLE_GENERIC_ARCH ON )
2018-11-24 17:40:34 +00:00
endif ( )
2012-12-24 02:33:50 +00:00
2016-10-01 23:59:12 +00:00
# Testing
2017-01-10 17:57:38 +00:00
option ( ENABLE_UNIT_TESTING "Build unit tests" ON )
2018-09-07 12:36:11 +00:00
option ( ENABLE_UNIT_TESTING_MINIMAL "Build a minimal set of unit tests" OFF )
2017-01-28 15:49:46 +00:00
option ( ENABLE_UNIT_TESTING_EXTRA "Download external files and build extra unit tests" OFF )
2017-01-10 17:57:38 +00:00
option ( ENABLE_SYSTEM_TESTING "Build system tests" OFF )
option ( ENABLE_SYSTEM_TESTING_EXTRA "Download external tools and build extra system tests" OFF )
if ( ENABLE_SYSTEM_TESTING_EXTRA )
set ( ENABLE_SYSTEM_TESTING ON )
2018-11-24 17:40:34 +00:00
endif ( )
2017-01-10 17:57:38 +00:00
option ( ENABLE_OWN_GPSTK "Force to download, build and link GPSTk for system tests, even if it is already installed" OFF )
2017-02-17 00:02:07 +00:00
option ( ENABLE_INSTALL_TESTS "Install QA code system-wide" OFF )
if ( ENABLE_FPGA )
set ( ENABLE_INSTALL_TESTS ON )
2018-11-24 17:40:34 +00:00
endif ( )
2016-11-27 22:47:45 +00:00
2017-08-07 17:29:05 +00:00
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
###############################
2015-03-20 16:02:41 +00:00
# GNSS-SDR version information
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
###############################
2018-12-14 18:41:13 +00:00
set ( THIS_IS_A_RELEASE OFF ) # only related to version name, no further implications.
2015-01-13 10:11:23 +00:00
if ( NOT ${ THIS_IS_A_RELEASE } )
# Get the current working branch
execute_process (
2018-11-19 07:51:05 +00:00
C O M M A N D g i t r e v - p a r s e - - a b b r e v - r e f H E A D
W O R K I N G _ D I R E C T O R Y $ { C M A K E _ S O U R C E _ D I R }
O U T P U T _ V A R I A B L E G I T _ B R A N C H
O U T P U T _ S T R I P _ T R A I L I N G _ W H I T E S P A C E
2015-01-13 10:11:23 +00:00
)
# Get the latest abbreviated commit hash of the working branch
execute_process (
2018-11-19 07:51:05 +00:00
C O M M A N D g i t l o g - 1 - - f o r m a t = % h
W O R K I N G _ D I R E C T O R Y $ { C M A K E _ S O U R C E _ D I R }
O U T P U T _ V A R I A B L E G I T _ C O M M I T _ H A S H
O U T P U T _ S T R I P _ T R A I L I N G _ W H I T E S P A C E
2015-01-13 10:11:23 +00:00
)
2018-11-24 17:40:34 +00:00
endif ( )
2014-04-10 20:05:04 +00:00
2012-12-24 02:33:50 +00:00
set ( VERSION_INFO_MAJOR_VERSION 0 )
2018-11-24 17:40:34 +00:00
set ( VERSION_INFO_API_COMPAT 0 )
2015-01-13 10:11:23 +00:00
if ( ${ THIS_IS_A_RELEASE } )
2018-06-08 11:43:50 +00:00
set ( VERSION_INFO_MINOR_VERSION 10 )
2018-11-24 17:40:34 +00:00
else ( )
2018-06-08 11:43:50 +00:00
set ( VERSION_INFO_MINOR_VERSION 10.git- ${ GIT_BRANCH } - ${ GIT_COMMIT_HASH } )
2018-11-24 17:40:34 +00:00
endif ( )
2012-12-24 02:33:50 +00:00
2015-01-13 10:11:23 +00:00
set ( VERSION ${ VERSION_INFO_MAJOR_VERSION } . ${ VERSION_INFO_API_COMPAT } . ${ VERSION_INFO_MINOR_VERSION } )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
2012-12-24 02:33:50 +00:00
2016-11-27 22:47:45 +00:00
2012-12-24 02:33:50 +00:00
########################################################################
# Environment setup
########################################################################
2012-12-29 21:07:43 +00:00
include ( ExternalProject )
2013-12-10 20:17:57 +00:00
# Detect 64-bits machine
2018-11-24 17:40:34 +00:00
if ( CMAKE_SIZEOF_VOID_P EQUAL 8 )
2018-11-19 07:51:05 +00:00
set ( ARCH_64BITS TRUE )
2018-11-24 17:40:34 +00:00
endif ( )
2013-12-10 20:17:57 +00:00
2013-01-27 20:50:38 +00:00
set ( OS_IS_MACOSX "" )
set ( OS_IS_LINUX "" )
2013-12-10 20:17:57 +00:00
2015-03-20 16:02:41 +00:00
# Detect Linux Distribution
2013-01-19 17:10:57 +00:00
if ( ${ CMAKE_SYSTEM_NAME } MATCHES "Linux" )
2018-11-19 07:51:05 +00:00
set ( OperatingSystem "Linux" )
set ( OS_IS_LINUX TRUE )
if ( ARCH_64BITS )
set ( ARCH_ "(64 bits)" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
set ( ARCH_ "(32 bits)" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( EXISTS "/etc/lsb-release" )
execute_process ( COMMAND cat /etc/lsb-release
2018-11-24 17:40:34 +00:00
C O M M A N D g r e p D I S T R I B _ I D
C O M M A N D a w k - F = " { p r i n t $ 2 } "
C O M M A N D t r " \ n " " "
C O M M A N D s e d " s / / / "
O U T P U T _ V A R I A B L E L I N U X _ D I S T R I B U T I O N
R E S U L T _ V A R I A B L E L I N U X _ I D _ R E S U L T
2018-11-19 07:51:05 +00:00
)
execute_process ( COMMAND cat /etc/lsb-release
2018-11-24 17:40:34 +00:00
C O M M A N D g r e p D I S T R I B _ R E L E A S E
C O M M A N D a w k - F = " { p r i n t $ 2 } "
C O M M A N D t r " \ n " " "
C O M M A N D s e d " s / / / "
O U T P U T _ V A R I A B L E L I N U X _ V E R
R E S U L T _ V A R I A B L E L I N U X _ V E R _ R E S U L T
2018-11-19 07:51:05 +00:00
)
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( NOT LINUX_DISTRIBUTION )
if ( EXISTS "/etc/linuxmint/info" )
2018-11-24 17:40:34 +00:00
set ( LINUX_DISTRIBUTION "LinuxMint" )
execute_process ( COMMAND cat /etc/linuxmint/info
C O M M A N D g r e p - m 1 R E L E A S E
C O M M A N D a w k - F = " { p r i n t $ 2 } "
C O M M A N D t r " \ n " " "
C O M M A N D s e d " s / / / "
O U T P U T _ V A R I A B L E L I N U X _ V E R
R E S U L T _ V A R I A B L E L I N U X _ V E R _ R E S U L T
)
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
if ( NOT LINUX_DISTRIBUTION )
if ( EXISTS "/etc/os-release" )
2018-11-24 17:40:34 +00:00
execute_process ( COMMAND cat /etc/os-release
C O M M A N D g r e p - m 1 N A M E
C O M M A N D a w k - F = " { p r i n t $ 2 } "
C O M M A N D t r " \ n " " "
C O M M A N D s e d " s / / / "
O U T P U T _ V A R I A B L E L I N U X _ D I S T R I B U T I O N
R E S U L T _ V A R I A B L E L I N U X _ I D _ R E S U L T
)
execute_process ( COMMAND cat /etc/os-release
C O M M A N D g r e p V E R S I O N _ I D
C O M M A N D a w k - F = " { p r i n t $ 2 } "
C O M M A N D t r " \ n " " "
C O M M A N D s e d " s / / / "
O U T P U T _ V A R I A B L E L I N U X _ V E R
R E S U L T _ V A R I A B L E L I N U X _ V E R _ R E S U L T
)
if ( ${ LINUX_DISTRIBUTION } MATCHES "Debian" )
set ( LINUX_DISTRIBUTION "Debian" )
file ( READ /etc/debian_version LINUX_VER )
endif ( )
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
if ( NOT LINUX_DISTRIBUTION )
if ( EXISTS "/etc/redhat-release" )
2018-11-24 17:40:34 +00:00
set ( LINUX_DISTRIBUTION "Red Hat" )
file ( READ /etc/redhat-release LINUX_VER )
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
if ( NOT LINUX_DISTRIBUTION )
if ( EXISTS "/etc/debian_version" )
2018-11-24 17:40:34 +00:00
set ( LINUX_DISTRIBUTION "Debian" )
file ( READ /etc/debian_version LINUX_VER )
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
if ( NOT LINUX_DISTRIBUTION )
set ( LINUX_DISTRIBUTION "Generic" )
set ( LINUX_VER "Unknown" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on ${LINUX_DISTRIBUTION} GNU/Linux Release ${LINUX_VER} ${ARCH_}" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 00:48:48 +00:00
if ( NOT LINUX_DISTRIBUTION )
set ( LINUX_DISTRIBUTION "Unknown" )
2018-11-24 17:40:34 +00:00
endif ( )
2013-01-19 17:10:57 +00:00
2017-10-30 19:15:12 +00:00
# Detect macOS / Mac OS X Version
2013-01-19 17:10:57 +00:00
if ( ${ CMAKE_SYSTEM_NAME } MATCHES "Darwin" )
2018-11-19 07:51:05 +00:00
set ( OperatingSystem "Mac OS X" )
set ( OS_IS_MACOSX TRUE )
execute_process ( COMMAND uname -v OUTPUT_VARIABLE DARWIN_VERSION )
string ( REGEX MATCH "[0-9]+" DARWIN_VERSION ${ DARWIN_VERSION } )
if ( ${ DARWIN_VERSION } MATCHES "18" )
set ( MACOS_MOJAVE TRUE )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LANGUAGE_STANDARD "c++14" )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LIBRARY "libc++" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on macOS Mojave 10.14" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "17" )
set ( MACOS_HIGH_SIERRA TRUE )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LANGUAGE_STANDARD "c++14" )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LIBRARY "libc++" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on macOS High Sierra 10.13" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "16" )
set ( MACOS_SIERRA TRUE )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LANGUAGE_STANDARD "c++14" )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LIBRARY "libc++" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on macOS Sierra 10.12" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "15" )
set ( MACOSX_EL_CAPITAN TRUE )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LANGUAGE_STANDARD "c++11" )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LIBRARY "libc++" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on Mac OS X 10.11 El Capitan" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "14" )
set ( MACOSX_YOSEMITE TRUE )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LANGUAGE_STANDARD "c++11" )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LIBRARY "libc++" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on Mac OS X 10.10 Yosemite" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "13" )
set ( MACOSX_MAVERICKS TRUE )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LANGUAGE_STANDARD "c++11" )
set ( CMAKE_XCODE_ATTRIBUTE_CLANG_CXX_LIBRARY "libc++" )
set ( CMAKE_XCODE_ATTRIBUTE_GCC_VERSION= "com.apple.compilers.llvm.clang.1_0" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on Mac OS X 10.9 Mavericks" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "12" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on Mac OS X 10.8 Mountain Lion" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "11" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on Mac OS X 10.7 Lion" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( ${ DARWIN_VERSION } MATCHES "10" )
message ( STATUS "Configuring GNSS-SDR v${VERSION} to be built on Mac OS X 10.6 Snow Leopard" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2013-01-19 17:10:57 +00:00
2018-08-16 08:02:51 +00:00
# Define extra build types and select Release by default to get optimization flags
include ( GnsssdrBuildTypes )
# Available options:
# - None: nothing set
# - Debug: -O2 -g
# - Release: -O3
# - RelWithDebInfo: -O3 -g
# - MinSizeRel: -Os
# - Coverage: -Wall -pedantic -pthread -g -O0 -fprofile-arcs -ftest-coverage
# - NoOptWithASM: -O0 -g -save-temps
# - O2WithASM: -O2 -g -save-temps
# - O3WithASM: -O3 -g -save-temps
# - ASAN: -Wall -Wextra -g -O2 -fsanitize=address -fno-omit-frame-pointer
2013-12-10 20:17:57 +00:00
if ( NOT CMAKE_BUILD_TYPE )
2018-11-19 07:51:05 +00:00
if ( ENABLE_GPERFTOOLS OR ENABLE_GPROF )
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
message ( STATUS "Build type not specified: defaulting to RelWithDebInfo." )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
set ( CMAKE_BUILD_TYPE "Release" )
message ( STATUS "Build type not specified: defaulting to Release." )
2018-11-24 17:40:34 +00:00
endif ( )
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "Build type set to ${CMAKE_BUILD_TYPE}." )
2018-11-24 17:40:34 +00:00
endif ( )
gnsssdr_check_build_type ( ${ CMAKE_BUILD_TYPE } )
2013-12-10 20:17:57 +00:00
set ( CMAKE_BUILD_TYPE ${ CMAKE_BUILD_TYPE } CACHE STRING "" )
2013-01-19 17:10:57 +00:00
2017-04-14 08:28:57 +00:00
# allow 'large' files in 32 bit builds
if ( UNIX )
2018-11-19 07:51:05 +00:00
add_definitions ( -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES )
2018-11-24 17:40:34 +00:00
endif ( )
2017-08-07 17:29:05 +00:00
# Determine if we are using make or ninja
2017-07-06 17:29:29 +00:00
if ( CMAKE_MAKE_PROGRAM MATCHES "make" )
2018-11-19 07:51:05 +00:00
set ( CMAKE_MAKE_PROGRAM_PRETTY_NAME "make" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-07-06 17:29:29 +00:00
if ( CMAKE_MAKE_PROGRAM MATCHES "ninja" )
2018-11-19 07:51:05 +00:00
set ( CMAKE_MAKE_PROGRAM_PRETTY_NAME "ninja" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-07-06 17:29:29 +00:00
if ( NOT CMAKE_MAKE_PROGRAM_PRETTY_NAME )
2018-11-19 07:51:05 +00:00
set ( CMAKE_MAKE_PROGRAM_PRETTY_NAME "${CMAKE_MAKE_PROGRAM}" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-04-14 08:28:57 +00:00
2014-10-28 00:00:04 +00:00
2016-11-27 22:47:45 +00:00
2014-10-27 04:19:26 +00:00
################################################################################
2017-08-07 17:29:05 +00:00
# Minimum required versions
################################################################################
2019-01-31 11:12:04 +00:00
set ( GNSSSDR_CMAKE_MIN_VERSION "2.8.12" )
2017-08-07 17:29:05 +00:00
set ( GNSSSDR_GCC_MIN_VERSION "4.7.2" )
set ( GNSSSDR_CLANG_MIN_VERSION "3.4.0" )
set ( GNSSSDR_APPLECLANG_MIN_VERSION "500" )
set ( GNSSSDR_GNURADIO_MIN_VERSION "3.7.3" )
2019-02-05 00:56:26 +00:00
set ( GNSSSDR_BOOST_MIN_VERSION "1.53" )
2017-08-07 17:29:05 +00:00
set ( GNSSSDR_PYTHON_MIN_VERSION "2.7" )
2018-07-24 10:01:50 +00:00
set ( GNSSSDR_PYTHON3_MIN_VERSION "3.4" )
2017-08-07 17:29:05 +00:00
set ( GNSSSDR_MAKO_MIN_VERSION "0.4.2" )
2018-04-03 17:17:44 +00:00
set ( GNSSSDR_ARMADILLO_MIN_VERSION "5.300.0" )
2018-02-24 17:01:10 +00:00
set ( GNSSSDR_MATIO_MIN_VERSION "1.5.3" )
2017-08-07 17:29:05 +00:00
2017-08-08 12:18:19 +00:00
2017-11-04 18:22:40 +00:00
################################################################################
# Versions to download and build (but not installed) if not found
################################################################################
2018-11-12 10:03:50 +00:00
set ( GNSSSDR_GFLAGS_LOCAL_VERSION "2.2.2" )
2017-11-04 18:22:40 +00:00
set ( GNSSSDR_GLOG_LOCAL_VERSION "0.3.5" )
2018-10-03 14:57:06 +00:00
set ( GNSSSDR_ARMADILLO_LOCAL_VERSION "9.200.x" )
2018-08-31 19:25:24 +00:00
set ( GNSSSDR_GTEST_LOCAL_VERSION "1.8.1" )
2017-11-04 18:22:40 +00:00
set ( GNSSSDR_GNSS_SIM_LOCAL_VERSION "master" )
2018-09-25 16:32:24 +00:00
set ( GNSSSDR_GPSTK_LOCAL_VERSION "2.10.6" )
2018-10-26 15:44:20 +00:00
set ( GNSSSDR_MATIO_LOCAL_VERSION "1.5.13" )
2018-11-11 11:27:01 +00:00
set ( GNSSSDR_PUGIXML_LOCAL_VERSION "1.9" )
2017-11-04 18:22:40 +00:00
2018-11-18 20:24:54 +00:00
if ( CMAKE_VERSION VERSION_LESS "3.0.2" ) # Fix for CentOS 7
2018-11-19 07:51:05 +00:00
set ( GNSSSDR_GFLAGS_LOCAL_VERSION "2.2.1" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-04 18:22:40 +00:00
2017-08-07 17:29:05 +00:00
################################################################################
2018-11-18 20:24:54 +00:00
# Check CMake version
2014-10-27 04:19:26 +00:00
################################################################################
2017-08-07 17:29:05 +00:00
if ( CMAKE_VERSION VERSION_LESS ${ GNSSSDR_CMAKE_MIN_VERSION } )
2018-11-19 07:51:05 +00:00
message ( STATUS "Your CMake version is too old and does not support some features required by GNSS-SDR. CMake version must be at least ${GNSSSDR_CMAKE_MIN_VERSION}." )
message ( FATAL_ERROR "Fatal error: CMake >= ${GNSSSDR_CMAKE_MIN_VERSION} required." )
2018-11-24 17:40:34 +00:00
endif ( )
2014-10-27 04:19:26 +00:00
2014-10-28 00:00:04 +00:00
2016-11-27 22:47:45 +00:00
2014-05-07 20:08:41 +00:00
################################################################################
2017-08-07 17:29:05 +00:00
# Check compiler version
2014-05-07 20:08:41 +00:00
################################################################################
2017-08-07 17:29:05 +00:00
if ( CMAKE_CXX_COMPILER_ID STREQUAL "GNU" )
2018-11-19 07:51:05 +00:00
if ( CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${ GNSSSDR_GCC_MIN_VERSION } )
message ( STATUS "Your GCC version is too old and does not support some C++ features required by GNSS-SDR. GCC version must be at least ${GNSSSDR_GCC_MIN_VERSION}" )
message ( FATAL_ERROR "Fatal error: GCC >= ${GNSSSDR_GCC_MIN_VERSION} required." )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2017-08-07 17:29:05 +00:00
2018-04-07 15:03:25 +00:00
if ( CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
2017-08-07 17:29:05 +00:00
execute_process ( COMMAND
$ { C M A K E _ C X X _ C O M P I L E R } - v
R E S U L T _ V A R I A B L E _ r e s E R R O R _ V A R I A B L E _ e r r
E R R O R _ S T R I P _ T R A I L I N G _ W H I T E S P A C E )
if ( ${ _res } STREQUAL "0" )
# output is in error stream
string ( REGEX MATCH "^Apple.*" IS_APPLE ${ _err } )
if ( "${IS_APPLE}" STREQUAL "" )
set ( MIN_VERSION ${ GNSSSDR_CLANG_MIN_VERSION } )
set ( APPLE_STR "" )
# retrieve the compiler's version from it
string ( REGEX MATCH "clang version [0-9.]+" CLANG_OTHER_VERSION ${ _err } )
string ( REGEX MATCH "[0-9.]+" CLANG_VERSION ${ CLANG_OTHER_VERSION } )
2018-11-24 17:40:34 +00:00
else ( )
2017-08-07 17:29:05 +00:00
set ( MIN_VERSION ${ GNSSSDR_APPLECLANG_MIN_VERSION } )
set ( APPLE_STR "Apple " )
# retrieve the compiler's version from it
string ( REGEX MATCH "(clang-[0-9.]+)" CLANG_APPLE_VERSION ${ _err } )
string ( REGEX MATCH "[0-9.]+" CLANG_VERSION ${ CLANG_APPLE_VERSION } )
2018-11-24 17:40:34 +00:00
endif ( )
2017-08-07 17:29:05 +00:00
if ( ${ CLANG_VERSION } VERSION_LESS "${MIN_VERSION}" )
message ( WARNING "\nThe compiler selected to build GNSS-SDR (${APPLE_STR}Clang version ${CLANG_VERSION} : ${CMAKE_CXX_COMPILER}) is older than that officially supported (${MIN_VERSION} minimum). This build may or not work. We highly recommend using Apple Clang version ${APPLECLANG_MIN_VERSION} or more recent, or Clang version ${CLANG_MIN_VERSION} or more recent." )
2018-11-24 17:40:34 +00:00
endif ( )
else ( )
2017-08-07 17:29:05 +00:00
message ( WARNING "\nCannot determine the version of the compiler selected to build GNSS-SDR (${APPLE_STR}Clang : ${CMAKE_CXX_COMPILER}). This build may or not work. We highly recommend using Apple Clang version ${APPLECLANG_MIN_VERSION} or more recent, or Clang version ${CLANG_MIN_VERSION} or more recent." )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2013-01-19 17:10:57 +00:00
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
2016-11-27 22:47:45 +00:00
2019-02-17 12:36:13 +00:00
################################################################################
# Set C and C++ standard
################################################################################
if ( NOT ( CMAKE_VERSION VERSION_LESS "3.1" ) )
set ( CMAKE_C_STANDARD 11 )
2019-02-18 04:51:25 +00:00
set ( CMAKE_CXX_STANDARD 14 )
2019-02-17 12:36:13 +00:00
set ( CMAKE_CXX_EXTENSIONS OFF )
else ( )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,C>:-std=gnu11>" )
2019-02-17 12:36:13 +00:00
if ( ( CMAKE_CXX_COMPILER_ID STREQUAL "GNU" ) AND NOT WIN32 )
if ( CMAKE_CXX_COMPILER_VERSION VERSION_LESS "6.1.1" )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++11>" )
2019-02-17 12:36:13 +00:00
else ( )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++14>" )
2019-02-17 12:36:13 +00:00
endif ( )
endif ( )
if ( CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
if ( OS_IS_MACOSX )
if ( CLANG_VERSION VERSION_LESS "600" )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++11>" )
2019-02-17 12:36:13 +00:00
else ( )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++14>" )
2019-02-17 12:36:13 +00:00
endif ( )
else ( )
if ( CMAKE_CXX_COMPILER_VERSION VERSION_LESS "3.5.0" )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++11>" )
2019-02-17 12:36:13 +00:00
else ( )
2019-02-24 18:17:32 +00:00
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:-std=c++14>" )
2019-02-17 12:36:13 +00:00
endif ( )
endif ( )
endif ( )
endif ( )
# Visibility
# See https://gcc.gnu.org/wiki/Visibility
if ( POLICY CMP0053 )
cmake_policy ( SET CMP0063 NEW )
set ( CMAKE_CXX_VISIBILITY_PRESET hidden )
set ( CMAKE_C_VISIBILITY_PRESET hidden )
set ( CMAKE_VISIBILITY_INLINES_HIDDEN 1 )
else ( )
if ( ( CMAKE_CXX_COMPILER_ID MATCHES "Clang" OR CMAKE_CXX_COMPILER_ID STREQUAL "GNU" ) AND NOT WIN32 )
add_definitions ( -fvisibility=hidden )
endif ( )
endif ( )
2014-09-30 23:09:44 +00:00
################################################################################
# Check if the compiler defines the architecture as ARM
################################################################################
if ( NOT OS_IS_MACOSX )
2016-12-20 01:35:52 +00:00
if ( CMAKE_CROSSCOMPILING )
set ( IS_ARM TRUE )
2019-02-03 20:12:24 +00:00
if ( NOT CMAKE_NO_SYSTEM_FROM_IMPORTED )
set ( CMAKE_NO_SYSTEM_FROM_IMPORTED TRUE )
endif ( )
2018-11-24 17:40:34 +00:00
else ( )
2016-12-20 01:35:52 +00:00
include ( TestForARM )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2014-09-30 23:09:44 +00:00
2016-11-27 22:47:45 +00:00
2017-11-25 19:09:10 +00:00
################################################################################
2017-11-25 23:18:21 +00:00
# Find the POSIX thread (pthread) libraries
2017-11-25 19:09:10 +00:00
################################################################################
2017-11-25 23:18:21 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.1 )
2019-02-07 14:21:47 +00:00
# Workaround for CMake < 3.1
2017-11-25 20:47:39 +00:00
find_package ( Threads REQUIRED )
2019-02-07 14:21:47 +00:00
add_library ( Threads::Threads SHARED IMPORTED )
set_property ( TARGET Threads::Threads PROPERTY INTERFACE_LINK_LIBRARIES "${CMAKE_THREAD_LIBS_INIT}" )
set_property ( TARGET Threads::Threads PROPERTY IMPORTED_LINK_INTERFACE_LANGUAGES "CXX" )
include ( GNUInstallDirs )
2019-02-07 19:52:24 +00:00
# Fix bug in Debian 8.11
if ( ${ LINUX_DISTRIBUTION } MATCHES "Debian" )
if ( ${ LINUX_VER } VERSION_LESS 8.12 )
if ( ARCH_64BITS )
set ( FIX_PTHREADS_LOCATION "x86_64-linux-gnu/" )
endif ( )
endif ( )
endif ( )
set_property ( TARGET Threads::Threads PROPERTY IMPORTED_LOCATION /usr/ ${ CMAKE_INSTALL_LIBDIR } / ${ FIX_PTHREADS_LOCATION } ${ CMAKE_FIND_LIBRARY_PREFIXES } pthread ${ CMAKE_SHARED_LIBRARY_SUFFIX } )
2018-11-24 17:40:34 +00:00
else ( )
2017-11-25 23:18:21 +00:00
set ( CMAKE_THREAD_PREFER_PTHREAD TRUE )
if ( CMAKE_CROSSCOMPILING )
set ( THREADS_PREFER_PTHREAD_FLAG FALSE )
2018-11-24 17:40:34 +00:00
else ( )
2017-11-25 23:18:21 +00:00
set ( THREADS_PREFER_PTHREAD_FLAG TRUE )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-25 23:18:21 +00:00
find_package ( Threads REQUIRED )
2018-11-24 17:40:34 +00:00
endif ( )
2016-11-27 22:47:45 +00:00
2017-08-08 12:18:19 +00:00
2012-12-25 10:28:29 +00:00
################################################################################
2015-08-24 11:17:48 +00:00
# Googletest - https://github.com/google/googletest
2012-12-25 10:28:29 +00:00
################################################################################
2012-12-28 15:40:03 +00:00
enable_testing ( )
2016-10-01 23:59:12 +00:00
if ( ENABLE_UNIT_TESTING OR ENABLE_SYSTEM_TESTING )
if ( EXISTS $ENV{ GTEST_DIR } )
set ( GTEST_DIR $ENV{ GTEST_DIR } )
2018-11-24 17:40:34 +00:00
endif ( )
2016-10-01 23:59:12 +00:00
if ( GTEST_DIR )
message ( STATUS "Googletest root folder set at ${GTEST_DIR}" )
2019-02-07 18:45:31 +00:00
find_path ( LIBGTEST_DEV_DIR NAMES src/gtest-all.cc PATHS ${ GTEST_DIR } ${ GTEST_DIR } /googletest )
2016-10-01 23:59:12 +00:00
if ( LIBGTEST_DEV_DIR )
2018-11-24 17:40:34 +00:00
message ( STATUS "Googletest has been found." )
else ( )
message ( FATAL_ERROR " Googletest source code has not been found at ${GTEST_DIR}." )
endif ( )
2019-02-07 16:05:26 +00:00
find_path ( GTEST_INCLUDE_DIRS NAMES gtest/gtest.h PATHS ${ GTEST_DIR } /googletest/include )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
find_path ( LIBGTEST_DEV_DIR NAMES src/gtest-all.cc PATHS /usr/src/googletest/googletest /usr/src/gtest /usr/include/gtest /opt/local/src/gtest-1.7.0 )
2016-10-01 23:59:12 +00:00
find_path ( GTEST_INCLUDE_DIRS NAMES gtest/gtest.h PATHS /usr/include /opt/local/src/gtest-1.7.0/include )
if ( LIBGTEST_DEV_DIR )
2018-11-24 17:40:34 +00:00
message ( STATUS "Googletest package has been found." )
else ( )
message ( STATUS " Googletest has not been found." )
message ( STATUS " Googletest v${GNSSSDR_GTEST_LOCAL_VERSION} will be downloaded and built automatically " )
message ( STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'. " )
endif ( )
endif ( )
endif ( )
2012-12-25 10:28:29 +00:00
2013-07-04 13:47:40 +00:00
################################################################################
2018-05-13 19:16:09 +00:00
# Boost - https://www.boost.org
2013-07-04 13:47:40 +00:00
################################################################################
if ( UNIX AND EXISTS "/usr/lib64" )
2013-12-14 10:23:33 +00:00
list ( APPEND BOOST_LIBRARYDIR "/usr/lib64" ) # Fedora 64-bit fix
2018-11-24 17:40:34 +00:00
endif ( )
2013-07-04 13:47:40 +00:00
set ( Boost_ADDITIONAL_VERSIONS
2019-02-05 00:56:26 +00:00
" 1 . 5 3 . 0 " " 1 . 5 3 " " 1 . 5 4 . 0 " " 1 . 5 4 "
2013-07-04 13:47:40 +00:00
" 1 . 5 5 . 0 " " 1 . 5 5 " " 1 . 5 6 . 0 " " 1 . 5 6 " " 1 . 5 7 . 0 " " 1 . 5 7 " " 1 . 5 8 . 0 " " 1 . 5 8 " " 1 . 5 9 . 0 " " 1 . 5 9 "
" 1 . 6 0 . 0 " " 1 . 6 0 " " 1 . 6 1 . 0 " " 1 . 6 1 " " 1 . 6 2 . 0 " " 1 . 6 2 " " 1 . 6 3 . 0 " " 1 . 6 3 " " 1 . 6 4 . 0 " " 1 . 6 4 "
" 1 . 6 5 . 0 " " 1 . 6 5 " " 1 . 6 6 . 0 " " 1 . 6 6 " " 1 . 6 7 . 0 " " 1 . 6 7 " " 1 . 6 8 . 0 " " 1 . 6 8 " " 1 . 6 9 . 0 " " 1 . 6 9 "
2016-05-24 15:26:34 +00:00
" 1 . 7 0 . 0 " " 1 . 7 0 " " 1 . 7 1 . 0 " " 1 . 7 1 " " 1 . 7 2 . 0 " " 1 . 7 2 " " 1 . 7 3 . 0 " " 1 . 7 3 " " 1 . 7 4 . 0 " " 1 . 7 4 "
2017-08-07 17:29:05 +00:00
" 1 . 7 5 . 0 " " 1 . 7 5 " " 1 . 7 6 . 0 " " 1 . 7 6 " " 1 . 7 7 . 0 " " 1 . 7 7 " " 1 . 7 8 . 0 " " 1 . 7 8 " " 1 . 7 9 . 0 " " 1 . 7 9 "
2018-11-19 07:51:05 +00:00
" 1 . 8 0 . 0 " " 1 . 8 0 " " 1 . 8 1 . 0 " " 1 . 8 1 " " 1 . 8 2 . 0 " " 1 . 8 2 " " 1 . 8 3 . 0 " " 1 . 8 3 " " 1 . 8 4 . 0 " " 1 . 8 4 "
2013-07-04 13:47:40 +00:00
)
set ( Boost_USE_MULTITHREAD ON )
set ( Boost_USE_STATIC_LIBS OFF )
2019-02-05 08:33:14 +00:00
find_package ( Boost ${ GNSSSDR_BOOST_MIN_VERSION } COMPONENTS atomic chrono date_time filesystem serialization system thread REQUIRED )
2013-07-04 13:47:40 +00:00
if ( NOT Boost_FOUND )
2018-11-19 07:51:05 +00:00
message ( FATAL_ERROR "Fatal error: Boost (version >=${GNSSSDR_BOOST_MIN_VERSION}) required." )
2018-11-24 17:40:34 +00:00
endif ( )
2013-07-04 13:47:40 +00:00
2019-02-03 18:24:44 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.5 )
if ( NOT TARGET Boost::boost )
add_library ( Boost::boost SHARED IMPORTED ) # Trick for CMake 2.8.12
set_property ( TARGET Boost::boost PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::boost PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ D A T E _ T I M E _ L I B R A R I E S } )
endif ( )
if ( NOT TARGET Boost::date_time )
add_library ( Boost::date_time SHARED IMPORTED )
set_property ( TARGET Boost::date_time PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::date_time PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ D A T E _ T I M E _ L I B R A R I E S } )
set_property ( TARGET Boost::date_time PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ D A T E _ T I M E _ L I B R A R I E S } )
endif ( )
if ( NOT TARGET Boost::system )
add_library ( Boost::system SHARED IMPORTED )
set_property ( TARGET Boost::system PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::system PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ S Y S T E M _ L I B R A R I E S } )
set_property ( TARGET Boost::system PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ S Y S T E M _ L I B R A R I E S } )
endif ( )
if ( NOT TARGET Boost::filesystem )
add_library ( Boost::filesystem SHARED IMPORTED )
set_property ( TARGET Boost::filesystem PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::filesystem PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ F I L E S Y S T E M _ L I B R A R I E S } )
set_property ( TARGET Boost::filesystem PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ F I L E S Y S T E M _ L I B R A R I E S } )
endif ( )
if ( NOT TARGET Boost::thread )
add_library ( Boost::thread SHARED IMPORTED )
set_property ( TARGET Boost::thread PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::thread PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ T H R E A D _ L I B R A R I E S } )
set_property ( TARGET Boost::thread PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ T H R E A D _ L I B R A R I E S } )
endif ( )
if ( NOT TARGET Boost::serialization )
add_library ( Boost::serialization SHARED IMPORTED )
set_property ( TARGET Boost::serialization PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::serialization PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ S E R I A L I Z A T I O N _ L I B R A R I E S } )
set_property ( TARGET Boost::serialization PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ S E R I A L I Z A T I O N _ L I B R A R I E S } )
endif ( )
if ( NOT TARGET Boost::chrono )
add_library ( Boost::chrono SHARED IMPORTED )
set_property ( TARGET Boost::chrono PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::chrono PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ C H R O N O _ L I B R A R I E S } )
set_property ( TARGET Boost::chrono PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ C H R O N O _ L I B R A R I E S } )
endif ( )
2019-02-04 07:11:28 +00:00
if ( NOT TARGET Boost::atomic )
add_library ( Boost::atomic SHARED IMPORTED )
set_property ( TARGET Boost::atomic PROPERTY
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S $ { B o o s t _ I N C L U D E _ D I R } )
set_property ( TARGET Boost::atomic PROPERTY
I N T E R F A C E _ L I N K _ L I B R A R I E S $ { B o o s t _ A T O M I C _ L I B R A R I E S } )
set_property ( TARGET Boost::atomic PROPERTY
I M P O R T E D _ L O C A T I O N $ { B o o s t _ A T O M I C _ L I B R A R I E S } )
endif ( )
2019-02-03 18:24:44 +00:00
endif ( )
2013-07-04 13:47:40 +00:00
2016-11-27 22:47:45 +00:00
2013-01-19 17:10:57 +00:00
################################################################################
2018-05-13 19:16:09 +00:00
# GNU Radio - https://gnuradio.org
2013-01-19 17:10:57 +00:00
################################################################################
2016-02-02 22:32:48 +00:00
set ( GR_REQUIRED_COMPONENTS RUNTIME ANALOG BLOCKS FFT FILTER PMT )
2018-11-21 07:28:50 +00:00
find_package ( GNURADIO )
2014-12-23 17:54:09 +00:00
if ( PC_GNURADIO_RUNTIME_VERSION )
2018-11-19 07:51:05 +00:00
if ( PC_GNURADIO_RUNTIME_VERSION VERSION_LESS ${ GNSSSDR_GNURADIO_MIN_VERSION } )
set ( GNURADIO_RUNTIME_FOUND )
message ( STATUS "The GNU Radio version installed in your system is too old." )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2013-12-10 20:17:57 +00:00
if ( NOT GNURADIO_RUNTIME_FOUND )
2018-11-19 07:51:05 +00:00
message ( STATUS "CMake cannot find GNU Radio >= ${GNSSSDR_GNURADIO_MIN_VERSION}" )
if ( OS_IS_LINUX )
2018-11-24 17:40:34 +00:00
message ( "Go to https://github.com/gnuradio/pybombs" )
message ( "and follow the instructions to install GNU Radio in your system." )
message ( FATAL_ERROR "GNU Radio ${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
endif ( )
2018-11-19 07:51:05 +00:00
if ( OS_IS_MACOSX )
2018-11-24 17:40:34 +00:00
message ( "You can install it easily via Macports:" )
message ( " sudo port install gnuradio " )
message ( "Alternatively, you can use homebrew:" )
message ( " brew install gnuradio" )
message ( FATAL_ERROR "GNU Radio ${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
endif ( )
2019-02-03 18:24:44 +00:00
else ( )
if ( NOT TARGET Gnuradio::runtime )
add_library ( Gnuradio::runtime SHARED IMPORTED )
list ( GET GNURADIO_RUNTIME_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_RUNTIME_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::runtime PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ R U N T I M E _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ R U N T I M E _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ R U N T I M E _ L I B R A R I E S } "
)
endif ( )
2018-11-24 17:40:34 +00:00
endif ( )
2013-12-10 20:17:57 +00:00
2016-01-06 10:01:16 +00:00
if ( NOT GNURADIO_ANALOG_FOUND )
2017-08-07 17:29:05 +00:00
message ( FATAL_ERROR "*** The gnuradio-analog library v${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
2019-02-03 18:24:44 +00:00
else ( )
if ( NOT TARGET Gnuradio::analog )
add_library ( Gnuradio::analog SHARED IMPORTED )
list ( GET GNURADIO_ANALOG_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_ANALOG_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::analog PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ A N A L O G _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ A N A L O G _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ A N A L O G _ L I B R A R I E S } "
)
endif ( )
2016-01-06 10:01:16 +00:00
endif ( )
2019-02-03 18:24:44 +00:00
2013-07-06 02:15:09 +00:00
if ( NOT GNURADIO_BLOCKS_FOUND )
2017-08-07 17:29:05 +00:00
message ( FATAL_ERROR "*** The gnuradio-blocks library v${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
2019-02-03 18:24:44 +00:00
else ( )
if ( NOT TARGET Gnuradio::blocks )
add_library ( Gnuradio::blocks SHARED IMPORTED )
list ( GET GNURADIO_BLOCKS_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_BLOCKS_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::blocks PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ B L O C K S _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ B L O C K S _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ B L O C K S _ L I B R A R I E S } "
)
endif ( )
2013-07-06 02:15:09 +00:00
endif ( )
2019-02-03 18:24:44 +00:00
2013-07-06 02:15:09 +00:00
if ( NOT GNURADIO_FILTER_FOUND )
2017-08-07 17:29:05 +00:00
message ( FATAL_ERROR "*** The gnuradio-filter library v${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
2019-02-03 18:24:44 +00:00
else ( )
if ( NOT TARGET Gnuradio::filter )
add_library ( Gnuradio::filter SHARED IMPORTED )
list ( GET GNURADIO_FILTER_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_FILTER_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::filter PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ F I L T E R _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ F I L T E R _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ F I L T E R _ L I B R A R I E S } "
)
endif ( )
2013-07-06 02:15:09 +00:00
endif ( )
2019-02-03 18:24:44 +00:00
2013-07-06 02:15:09 +00:00
if ( NOT GNURADIO_FFT_FOUND )
2017-08-07 17:29:05 +00:00
message ( FATAL_ERROR "*** The gnuradio-fft library v${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
2019-02-03 18:24:44 +00:00
else ( )
if ( NOT TARGET Gnuradio::fft )
add_library ( Gnuradio::fft SHARED IMPORTED )
list ( GET GNURADIO_FFT_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_FFT_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::fft PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ F F T _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ F F T _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ F F T _ L I B R A R I E S } "
)
endif ( )
2013-07-06 02:15:09 +00:00
endif ( )
2019-02-03 18:24:44 +00:00
2016-01-06 10:01:16 +00:00
if ( NOT GNURADIO_PMT_FOUND )
2017-08-07 17:29:05 +00:00
message ( FATAL_ERROR "*** The gnuradio-pmt library v${GNSSSDR_GNURADIO_MIN_VERSION} or later is required to build gnss-sdr" )
2019-02-03 18:24:44 +00:00
else ( )
if ( NOT TARGET Gnuradio::pmt )
add_library ( Gnuradio::pmt SHARED IMPORTED )
list ( GET GNURADIO_PMT_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_PMT_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::pmt PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ P M T _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ P M T _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ P M T _ L I B R A R I E S } "
)
endif ( )
2013-07-06 02:15:09 +00:00
endif ( )
2013-01-01 11:24:42 +00:00
2014-11-17 19:42:50 +00:00
2016-01-06 01:05:34 +00:00
2014-11-17 19:42:50 +00:00
################################################################################
# VOLK - Vector-Optimized Library of Kernels
################################################################################
2018-11-21 07:28:50 +00:00
find_package ( VOLK )
2014-11-14 20:42:22 +00:00
if ( NOT VOLK_FOUND )
message ( FATAL_ERROR "*** VOLK is required to build gnss-sdr" )
endif ( )
2013-01-01 11:24:42 +00:00
2017-04-25 18:08:45 +00:00
################################################################################
2018-02-07 17:35:45 +00:00
# Log4cpp - http://log4cpp.sourceforge.net/
2017-04-25 18:08:45 +00:00
################################################################################
2018-11-21 07:28:50 +00:00
find_package ( LOG4CPP )
2017-04-25 18:08:45 +00:00
if ( NOT LOG4CPP_FOUND )
2018-01-31 13:47:33 +00:00
message ( FATAL_ERROR "*** Log4cpp is required to build gnss-sdr" )
2017-04-25 18:08:45 +00:00
endif ( )
2014-10-28 00:00:04 +00:00
################################################################################
2014-11-07 17:23:59 +00:00
# volk_gnsssdr module - GNSS-SDR's own VOLK library
2014-10-28 00:00:04 +00:00
################################################################################
2018-11-21 07:28:50 +00:00
find_package ( VOLKGNSSSDR )
if ( NOT VOLKGNSSSDR_FOUND )
2017-07-06 17:29:29 +00:00
message ( STATUS " volk_gnsssdr will be built along with gnss-sdr when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'" )
2016-12-25 19:40:29 +00:00
###############################
# Find Python required modules
###############################
2018-07-27 08:38:32 +00:00
include ( SetupPython ) # sets PYTHON_EXECUTABLE and search for required modules
2016-12-25 19:40:29 +00:00
if ( NOT PYTHON_MIN_VER_FOUND )
2017-08-07 17:29:05 +00:00
message ( FATAL_ERROR "Python ${GNSSSDR_PYTHON_MIN_VERSION} or greater required to build VOLK_GNSSSDR" )
2016-12-25 19:40:29 +00:00
endif ( )
2018-07-27 08:38:32 +00:00
if ( ${ PYTHON3 } )
set ( PYTHON_NAME "python3" )
2018-11-24 17:40:34 +00:00
else ( )
2018-07-27 08:38:32 +00:00
set ( PYTHON_NAME "python" )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-25 19:40:29 +00:00
# Mako
if ( NOT MAKO_FOUND )
2018-07-27 08:38:32 +00:00
message ( STATUS "Mako template library not found. See http://www.makotemplates.org/ " )
2016-12-26 10:42:38 +00:00
message ( STATUS " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
2018-11-19 07:51:05 +00:00
message ( STATUS " sudo yum install ${PYTHON_NAME}-mako" )
2016-12-26 10:42:38 +00:00
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
2018-11-19 07:51:05 +00:00
message ( STATUS " sudo zypper install ${PYTHON_NAME}-Mako" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS " sudo apt-get install ${PYTHON_NAME}-mako" )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-25 19:40:29 +00:00
message ( FATAL_ERROR "Mako templates required to build VOLK_GNSSSDR" )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-26 11:42:20 +00:00
2016-12-25 19:40:29 +00:00
# Six
if ( NOT SIX_FOUND )
2016-12-26 11:27:07 +00:00
message ( STATUS "python-six not found. See https://pythonhosted.org/six/ " )
2016-12-26 10:42:38 +00:00
message ( STATUS " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
2018-11-19 07:51:05 +00:00
message ( STATUS " sudo yum install ${PYTHON_NAME}-six" )
2016-12-26 10:42:38 +00:00
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
2018-11-19 07:51:05 +00:00
message ( STATUS " sudo zypper install ${PYTHON_NAME}-six" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS " sudo apt-get install ${PYTHON_NAME}-six" )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-25 19:40:29 +00:00
message ( FATAL_ERROR "six - python 2 and 3 compatibility library required to build VOLK_GNSSSDR" )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-26 11:42:20 +00:00
2018-02-05 13:53:07 +00:00
set ( READ_ENVIRO "" )
2016-12-25 19:40:29 +00:00
if ( ENABLE_PACKAGING )
2018-11-17 13:31:06 +00:00
if ( ( CMAKE_CXX_COMPILER_ID STREQUAL "GNU" ) AND NOT WIN32 )
2017-07-23 19:09:41 +00:00
set ( STRIP_VOLK_GNSSSDR_PROFILE "-DENABLE_STRIP=ON -DCMAKE_VERBOSE_MAKEFILE=ON" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-10-04 20:35:44 +00:00
if ( NOT DEFINED ENV{PROTECT_PASSWORDS} )
2018-11-24 17:40:34 +00:00
set ( READ_ENVIRO ${ CMAKE_COMMAND } -E environment )
endif ( )
endif ( )
2016-12-26 11:42:20 +00:00
2017-06-21 06:54:47 +00:00
set ( VOLK_GNSSSDR_BUILD_COMMAND "${CMAKE_MAKE_PROGRAM}" )
2016-12-25 19:40:29 +00:00
if ( PYTHON_EXECUTABLE )
set ( USE_THIS_PYTHON "-DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}" )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-25 19:40:29 +00:00
if ( OS_IS_MACOSX )
if ( CMAKE_GENERATOR STREQUAL Xcode )
set ( VOLK_GNSSSDR_BUILD_COMMAND "xcodebuild" "-configuration" "Debug" "-target" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2016-12-26 11:42:20 +00:00
2017-04-06 19:16:44 +00:00
if ( CMAKE_CROSSCOMPILING )
set ( VOLK_GNSSSDR_COMPILER "" )
2018-11-24 17:40:34 +00:00
else ( )
2016-12-20 02:29:40 +00:00
set ( VOLK_GNSSSDR_COMPILER -DCMAKE_C_COMPILER= ${ CMAKE_C_COMPILER } -DCMAKE_CXX_COMPILER= ${ CMAKE_CXX_COMPILER } )
2018-11-24 17:40:34 +00:00
endif ( )
2016-12-20 01:35:52 +00:00
set ( VOLK_GNSSSDR_CMAKE_ARGS ${ VOLK_GNSSSDR_COMPILER }
2018-11-19 07:51:05 +00:00
- D C M A K E _ I N S T A L L _ P R E F I X = $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l
- D E N A B L E _ S T A T I C _ L I B S = O N
- D E N A B L E _ P R O F I L I N G = $ { E N A B L E _ P R O F I L I N G }
- D C M A K E _ I N C L U D E _ P A T H = $ { B o o s t _ I N C L U D E _ D I R }
- D E N A B L E _ O R C = O F F
$ { S T R I P _ V O L K _ G N S S S D R _ P R O F I L E }
$ { U S E _ T H I S _ P Y T H O N } )
2016-12-20 01:35:52 +00:00
if ( EXISTS $ENV{ OECORE_TARGET_SYSROOT } )
2017-04-06 19:16:44 +00:00
set ( VOLK_GNSSSDR_CMAKE_ARGS ${ VOLK_GNSSSDR_CMAKE_ARGS }
2018-11-19 07:51:05 +00:00
- D C M A K E _ T O O L C H A I N _ F I L E = $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / c m a k e / T o o l c h a i n s / o e - s d k _ c r o s s . c m a k e
- D C R O S S C O M P I L E _ M U L T I L I B = T R U E )
2018-11-24 17:40:34 +00:00
endif ( )
2017-06-22 18:17:37 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
ExternalProject_Add ( volk_gnsssdr_module
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / s r c / a l g o r i t h m s / l i b s / v o l k _ g n s s s d r _ m o d u l e / v o l k _ g n s s s d r
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / b u i l d
C M A K E _ A R G S $ { R E A D _ E N V I R O } $ { V O L K _ G N S S S D R _ C M A K E _ A R G S }
D O W N L O A D _ C O M M A N D " "
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
B U I L D _ C O M M A N D $ { R E A D _ E N V I R O } $ { V O L K _ G N S S S D R _ B U I L D _ C O M M A N D } v o l k _ g n s s s d r _ p r o f i l e
I N S T A L L _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l
2018-11-19 07:51:05 +00:00
)
2018-11-24 17:40:34 +00:00
else ( )
ExternalProject_Add ( volk_gnsssdr_module
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / s r c / a l g o r i t h m s / l i b s / v o l k _ g n s s s d r _ m o d u l e / v o l k _ g n s s s d r
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / b u i l d
C M A K E _ A R G S $ { R E A D _ E N V I R O } $ { V O L K _ G N S S S D R _ C M A K E _ A R G S }
D O W N L O A D _ C O M M A N D " "
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
B U I L D _ C O M M A N D $ { R E A D _ E N V I R O } $ { V O L K _ G N S S S D R _ B U I L D _ C O M M A N D } v o l k _ g n s s s d r _ p r o f i l e
B U I L D _ B Y P R O D U C T S $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } v o l k _ g n s s s d r $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
$ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l / b i n / v o l k _ g n s s s d r _ p r o f i l e
I N S T A L L _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l
2018-11-19 07:51:05 +00:00
)
2018-11-24 17:40:34 +00:00
endif ( )
2014-11-07 20:44:44 +00:00
find_package ( ORC )
if ( NOT ORC_FOUND )
2018-11-19 07:51:05 +00:00
set ( ORC_LIBRARIES "" )
set ( ORC_INCLUDE_DIRS "" )
2018-11-24 17:40:34 +00:00
endif ( )
2015-03-20 16:02:41 +00:00
2014-11-07 20:44:44 +00:00
add_library ( volk_gnsssdr UNKNOWN IMPORTED )
2017-06-21 06:54:47 +00:00
set_property ( TARGET volk_gnsssdr PROPERTY IMPORTED_LOCATION ${ CMAKE_CURRENT_BINARY_DIR } /volk_gnsssdr_module/install/lib/libvolk_gnsssdr ${ CMAKE_STATIC_LIBRARY_SUFFIX } )
2014-11-17 19:42:50 +00:00
set ( VOLK_GNSSSDR_INCLUDE_DIRS "${CMAKE_CURRENT_BINARY_DIR}/volk_gnsssdr_module/build/include/;${CMAKE_CURRENT_SOURCE_DIR}/src/algorithms/libs/volk_gnsssdr_module/volk_gnsssdr/include;${ORC_INCLUDE_DIRS}" )
2016-10-23 09:12:13 +00:00
set ( VOLK_GNSSSDR_LIBRARIES volk_gnsssdr ${ ORC_LIBRARIES } )
2014-11-07 17:23:59 +00:00
2019-02-03 18:24:44 +00:00
if ( NOT TARGET Volkgnsssdr::volkgnsssdr )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_BINARY_DIR } /volk_gnsssdr_module/build/include )
add_library ( Volkgnsssdr::volkgnsssdr STATIC IMPORTED )
add_dependencies ( Volkgnsssdr::volkgnsssdr volk_gnsssdr_module )
set_target_properties ( Volkgnsssdr::volkgnsssdr PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l / l i b / l i b v o l k _ g n s s s d r $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
I N C L U D E _ D I R E C T O R I E S " $ { V O L K _ G N S S S D R _ I N C L U D E _ D I R S } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { V O L K _ G N S S S D R _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { V O L K _ G N S S S D R _ L I B R A R I E S } "
)
endif ( )
2017-06-22 18:59:45 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
add_custom_command ( TARGET volk_gnsssdr_module POST_BUILD
C O M M A N D $ { C M A K E _ C O M M A N D } - E c o p y $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l / b i n / v o l k _ g n s s s d r _ p r o f i l e
2017-06-22 18:59:45 +00:00
$ { C M A K E _ S O U R C E _ D I R } / i n s t a l l / v o l k _ g n s s s d r _ p r o f i l e )
2018-11-24 17:40:34 +00:00
else ( )
add_custom_command ( TARGET volk_gnsssdr_module POST_BUILD
C O M M A N D $ { C M A K E _ C O M M A N D } - E c o p y $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l / b i n / v o l k _ g n s s s d r _ p r o f i l e
2017-06-21 06:54:47 +00:00
$ { C M A K E _ S O U R C E _ D I R } / i n s t a l l / v o l k _ g n s s s d r _ p r o f i l e
2018-11-24 17:40:34 +00:00
B Y P R O D U C T S $ { C M A K E _ S O U R C E _ D I R } / i n s t a l l / v o l k _ g n s s s d r _ p r o f i l e )
endif ( )
2017-07-13 15:28:08 +00:00
2016-07-06 18:25:39 +00:00
add_custom_command ( TARGET volk_gnsssdr_module POST_BUILD
C O M M A N D $ { C M A K E _ C O M M A N D } - E c o p y $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / v o l k _ g n s s s d r _ m o d u l e / i n s t a l l / b i n / v o l k _ g n s s s d r - c o n f i g - i n f o
2018-11-24 17:40:34 +00:00
$ { C M A K E _ S O U R C E _ D I R } / i n s t a l l / v o l k _ g n s s s d r - c o n f i g - i n f o )
endif ( )
2014-09-07 23:56:09 +00:00
2013-11-13 21:07:33 +00:00
2016-11-27 22:47:45 +00:00
2013-01-01 11:24:42 +00:00
################################################################################
2015-03-24 18:53:10 +00:00
# gflags - https://github.com/gflags/gflags
2013-01-01 11:24:42 +00:00
################################################################################
2014-11-12 19:22:02 +00:00
set ( LOCAL_GFLAGS false )
2018-11-21 07:28:50 +00:00
find_package ( GFLAGS )
if ( NOT GFLAGS_FOUND )
2018-11-19 07:51:05 +00:00
message ( STATUS " gflags library has not been found." )
message ( STATUS " gflags v${GNSSSDR_GFLAGS_LOCAL_VERSION} will be downloaded and built automatically " )
message ( STATUS " when doing 'make'. " )
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
ExternalProject_Add ( gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
G I T _ R E P O S I T O R Y g i t : / / g i t h u b . c o m / g f l a g s / g f l a g s . g i t
G I T _ T A G v $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g f l a g s / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
C M A K E _ A R G S - D B U I L D _ S H A R E D _ L I B S = O N - D B U I L D _ S T A T I C _ L I B S = O N - D B U I L D _ g f l a g s _ n o t h r e a d s _ L I B = O F F - D C M A K E _ C X X _ C O M P I L E R = $ { C M A K E _ C X X _ C O M P I L E R }
B U I L D _ C O M M A N D $ { C M A K E _ M A K E _ P R O G R A M }
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
)
else ( )
ExternalProject_Add ( gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
G I T _ R E P O S I T O R Y g i t : / / g i t h u b . c o m / g f l a g s / g f l a g s . g i t
G I T _ T A G v $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g f l a g s / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N }
C M A K E _ A R G S - D B U I L D _ S H A R E D _ L I B S = O N - D B U I L D _ S T A T I C _ L I B S = O N - D B U I L D _ g f l a g s _ n o t h r e a d s _ L I B = O F F - D C M A K E _ C X X _ C O M P I L E R = $ { C M A K E _ C X X _ C O M P I L E R }
B U I L D _ C O M M A N D $ { C M A K E _ M A K E _ P R O G R A M }
B U I L D _ B Y P R O D U C T S $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g f l a g s $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
)
endif ( )
2018-11-19 07:51:05 +00:00
set ( GFlags_INCLUDE_DIRS
$ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / i n c l u d e C A C H E P A T H " L o c a l G f l a g s h e a d e r s "
)
2019-02-03 18:24:44 +00:00
file ( GLOB GFlags_SHARED_LIBS
" $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g f l a g s $ { C M A K E _ S H A R E D _ L I B R A R Y _ S U F F I X } * "
)
if ( NOT TARGET Gflags::gflags )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_BINARY_DIR } /gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION } /include )
add_library ( Gflags::gflags STATIC IMPORTED )
add_dependencies ( Gflags::gflags gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION } )
set_target_properties ( Gflags::gflags PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g f l a g s $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
I N C L U D E _ D I R E C T O R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / i n c l u d e "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / i n c l u d e "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g f l a g s - $ { G N S S S D R _ G F L A G S _ L O C A L _ V E R S I O N } / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g f l a g s $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
)
endif ( )
2018-11-19 07:51:05 +00:00
set ( LOCAL_GFLAGS true CACHE STRING "GFlags downloaded and built automatically" FORCE )
2018-11-24 17:40:34 +00:00
endif ( )
2013-01-01 11:24:42 +00:00
2016-11-27 22:47:45 +00:00
2012-12-24 02:33:50 +00:00
################################################################################
2015-03-24 20:44:03 +00:00
# glog - https://github.com/google/glog
2012-12-24 02:33:50 +00:00
################################################################################
2014-11-14 00:40:43 +00:00
if ( NOT ${ ENABLE_OWN_GLOG } )
2018-11-19 07:51:05 +00:00
find_package ( GLOG )
if ( GLOG_INCLUDE_DIRS )
2014-12-07 11:05:38 +00:00
set ( GLOG_FOUND ON )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2017-11-04 18:22:40 +00:00
set ( glog_RELEASE ${ GNSSSDR_GLOG_LOCAL_VERSION } )
2018-11-19 07:51:05 +00:00
if ( NOT GLOG_FOUND OR ${ LOCAL_GFLAGS } )
message ( STATUS " glog library has not been found" )
2018-11-21 07:28:50 +00:00
if ( NOT GFLAGS_FOUND )
2018-11-19 07:51:05 +00:00
message ( STATUS " or it is likely not linked to gflags." )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
message ( STATUS " glog v${GNSSSDR_GLOG_LOCAL_VERSION} will be downloaded and built automatically " )
message ( STATUS " when doing 'make'. " )
if ( NOT ${ LOCAL_GFLAGS } )
add_library ( gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION } UNKNOWN IMPORTED )
set_property ( TARGET gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION } PROPERTY IMPORTED_LOCATION "${GFlags_LIBS}" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
set ( TARGET_GFLAGS gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION } )
if ( ${ LOCAL_GFLAGS } )
set ( GFLAGS_LIBRARIES_TO_LINK ${ GFlags_SHARED_LIBS } )
set ( GFLAGS_LIBRARY_DIR_TO_LINK ${ CMAKE_CURRENT_BINARY_DIR } /gflags- ${ GNSSSDR_GFLAGS_LOCAL_VERSION } /lib )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
set ( GFLAGS_LIBRARIES_TO_LINK ${ GFlags_LIBS } )
set ( GFLAGS_LIBRARY_DIR_TO_LINK ${ GFlags_LIBRARY_DIRS } )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
if ( CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
file ( WRITE ${ CMAKE_CURRENT_BINARY_DIR } /glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } /tmp/configure_with_gflags
2014-05-18 10:53:16 +00:00
" #!/bin/sh
e x p o r t C P P F L A G S = - I $ { G F l a g s _ I N C L U D E _ D I R S }
2016-11-05 08:20:24 +00:00
e x p o r t L D F L A G S = - L $ { G F L A G S _ L I B R A R Y _ D I R _ T O _ L I N K }
e x p o r t L I B S = \ " $ { G F L A G S _ L I B R A R I E S _ T O _ L I N K } - l c + + \ "
2015-03-20 16:02:41 +00:00
e x p o r t C X X F L A G S = \ " - s t d l i b = l i b c + + \ "
e x p o r t C C = c l a n g
2014-05-18 10:53:16 +00:00
e x p o r t C X X = c l a n g + +
2017-11-04 18:22:40 +00:00
c d $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } /
2016-11-04 11:55:09 +00:00
a c l o c a l
a u t o m a k e - - a d d - m i s s i n g
a u t o r e c o n f - v f i
2017-11-04 18:22:40 +00:00
c d $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
$ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / c o n f i g u r e " )
2016-11-04 15:25:34 +00:00
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
file ( WRITE ${ CMAKE_CURRENT_BINARY_DIR } /glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } /tmp/configure_with_gflags
2014-11-09 20:04:52 +00:00
" #!/bin/sh
e x p o r t C P P F L A G S = - I $ { G F l a g s _ I N C L U D E _ D I R S }
2016-11-05 08:20:24 +00:00
e x p o r t L D F L A G S = - L $ { G F L A G S _ L I B R A R Y _ D I R _ T O _ L I N K }
2016-11-04 15:25:34 +00:00
e x p o r t L I B S = $ { G F L A G S _ L I B R A R I E S _ T O _ L I N K }
2017-11-04 18:22:40 +00:00
c d $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } /
2016-11-04 11:55:09 +00:00
a c l o c a l
a u t o m a k e - - a d d - m i s s i n g
a u t o r e c o n f - v f i
2017-11-04 18:22:40 +00:00
c d $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
$ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / c o n f i g u r e " )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
file ( COPY ${ CMAKE_CURRENT_BINARY_DIR } /glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } /tmp/configure_with_gflags
D E S T I N A T I O N $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
F I L E _ P E R M I S S I O N S O W N E R _ R E A D O W N E R _ W R I T E O W N E R _ E X E C U T E G R O U P _ R E A D
2018-11-24 17:40:34 +00:00
G R O U P _ E X E C U T E W O R L D _ R E A D W O R L D _ E X E C U T E )
2016-11-04 15:25:34 +00:00
2018-11-19 07:51:05 +00:00
set ( GLOG_CONFIGURE ${ CMAKE_CURRENT_BINARY_DIR } /glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } /configure_with_gflags )
# Ensure that aclocal and libtool are present
if ( OS_IS_LINUX )
if ( EXISTS "/usr/bin/libtoolize" )
2018-11-24 17:40:34 +00:00
if ( EXISTS "/usr/bin/aclocal" OR EXISTS "/usr/bin/aclocal-1.16" OR EXISTS "/usr/bin/aclocal-1.15" OR EXISTS "/usr/bin/aclocal-1.14" OR EXISTS "/usr/bin/aclocal-1.13" OR EXISTS "/usr/bin/aclocal-1.11" OR EXISTS "/usr/bin/aclocal-1.10" )
# Everything ok, we can move on
else ( )
message ( " aclocal has not been found." )
message ( " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
message ( " sudo yum groupinstall 'Development Tools'" )
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
message ( " sudo zypper install automake" )
else ( )
message ( " sudo apt-get install automake" )
endif ( )
message ( FATAL_ERROR "aclocal is required to build glog from source" )
endif ( )
else ( )
2018-11-19 07:51:05 +00:00
message ( " libtool has not been found." )
message ( " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
2018-11-24 17:40:34 +00:00
message ( " sudo yum groupinstall 'Development Tools'" )
2018-11-19 07:51:05 +00:00
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
2018-11-24 17:40:34 +00:00
message ( " sudo zypper install libtoool" )
else ( )
message ( " sudo apt-get install libtool" )
endif ( )
2018-11-19 07:51:05 +00:00
message ( FATAL_ERROR "libtool is required to build glog from source" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2016-11-04 15:25:34 +00:00
2018-11-19 07:51:05 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
ExternalProject_Add ( glog- ${ GNSSSDR_GLOG_LOCAL_VERSION }
2018-11-19 07:51:05 +00:00
D E P E N D S $ { T A R G E T _ G F L A G S }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
G I T _ R E P O S I T O R Y h t t p s : / / g i t h u b . c o m / g o o g l e / g l o g /
G I T _ T A G v $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
C O N F I G U R E _ C O M M A N D $ { G L O G _ C O N F I G U R E } - - p r e f i x = < I N S T A L L _ D I R >
B U I L D _ C O M M A N D " $ { C M A K E _ M A K E _ P R O G R A M } "
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
)
2018-11-24 17:40:34 +00:00
else ( )
ExternalProject_Add ( glog- ${ GNSSSDR_GLOG_LOCAL_VERSION }
2018-11-19 07:51:05 +00:00
D E P E N D S $ { T A R G E T _ G F L A G S }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
G I T _ R E P O S I T O R Y h t t p s : / / g i t h u b . c o m / g o o g l e / g l o g /
G I T _ T A G v $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N }
C O N F I G U R E _ C O M M A N D $ { G L O G _ C O N F I G U R E } - - p r e f i x = < I N S T A L L _ D I R >
B U I L D _ C O M M A N D " $ { C M A K E _ M A K E _ P R O G R A M } "
B U I L D _ B Y P R O D U C T S $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / . l i b s / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g l o g $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
)
2018-11-24 17:40:34 +00:00
endif ( )
2019-02-03 18:24:44 +00:00
add_dependencies ( glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } Gflags::gflags )
2018-11-19 07:51:05 +00:00
# Set up variables
set ( GLOG_INCLUDE_DIRS
$ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / g l o g / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / s r c /
$ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / s r c
)
set ( GLOG_LIBRARIES
$ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / . l i b s / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g l o g $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
)
2019-02-03 18:24:44 +00:00
# Create Glog::glog target
if ( NOT TARGET Glog::glog )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_SOURCE_DIR } /thirdparty/glog/glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } /src )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_BINARY_DIR } /glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } /src )
add_library ( Glog::glog STATIC IMPORTED )
add_dependencies ( Glog::glog glog- ${ GNSSSDR_GLOG_LOCAL_VERSION } )
set_target_properties ( Glog::glog PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / . l i b s / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g l o g $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
I N C L U D E _ D I R E C T O R I E S " $ { G L O G _ I N C L U D E _ D I R S } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G L O G _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / g l o g - $ { G N S S S D R _ G L O G _ L O C A L _ V E R S I O N } / . l i b s / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } g l o g $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
)
endif ( )
2018-11-19 07:51:05 +00:00
set ( LOCAL_GLOG true CACHE STRING "Glog downloaded and built automatically" FORCE )
2018-11-24 17:40:34 +00:00
endif ( )
2012-12-24 02:33:50 +00:00
2015-05-23 09:20:26 +00:00
if ( NOT ENABLE_LOG )
2018-11-19 07:51:05 +00:00
message ( STATUS "Logging is not enabled" )
2018-11-24 17:40:34 +00:00
endif ( )
2015-05-23 09:20:26 +00:00
2013-01-11 14:13:07 +00:00
2017-11-26 00:48:48 +00:00
#############################################################################
# Check that BLAS (Basic Linear Algebra Subprograms) is found in the system
# See http://www.netlib.org/blas/
#############################################################################
find_library ( BLAS blas )
if ( NOT BLAS )
message ( " The BLAS library has not been found." )
message ( " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
message ( " sudo yum install blas-devel" )
2018-11-24 17:40:34 +00:00
else ( )
2017-11-26 00:48:48 +00:00
message ( " sudo apt-get install libblas-dev" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 00:48:48 +00:00
message ( FATAL_ERROR "BLAS is required to build gnss-sdr" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 00:48:48 +00:00
#############################################################################
# Check that LAPACK (Linear Algebra PACKage) is found in the system
# See http://www.netlib.org/lapack/
#############################################################################
find_library ( LAPACK lapack )
if ( NOT LAPACK )
message ( " The LAPACK library has not been found." )
message ( " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
message ( " sudo yum install lapack-devel" )
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
message ( " sudo zypper install lapack-devel" )
2018-11-24 17:40:34 +00:00
else ( )
2017-11-26 00:48:48 +00:00
message ( " sudo apt-get install liblapack-dev" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 00:48:48 +00:00
message ( FATAL_ERROR "LAPACK is required to build gnss-sdr" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-25 19:09:10 +00:00
2013-11-27 21:11:21 +00:00
2017-11-25 19:09:10 +00:00
################################################################################
# Armadillo - http://arma.sourceforge.net/
################################################################################
2012-12-24 02:33:50 +00:00
find_package ( Armadillo )
2017-08-08 12:18:19 +00:00
if ( ARMADILLO_FOUND )
if ( ${ ARMADILLO_VERSION_STRING } VERSION_LESS ${ GNSSSDR_ARMADILLO_MIN_VERSION } )
set ( ARMADILLO_FOUND false )
set ( ENABLE_OWN_ARMADILLO true )
2019-02-03 18:24:44 +00:00
else ( )
add_library ( Armadillo::armadillo SHARED IMPORTED )
set_target_properties ( Armadillo::armadillo PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { A R M A D I L L O _ L I B R A R I E S } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { A R M A D I L L O _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { A R M A D I L L O _ L I B R A R I E S } "
)
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2017-08-07 17:29:05 +00:00
2017-02-03 11:04:15 +00:00
if ( NOT ARMADILLO_FOUND OR ENABLE_OWN_ARMADILLO )
2018-11-19 07:51:05 +00:00
message ( STATUS " Armadillo has not been found." )
message ( STATUS " Armadillo ${GNSSSDR_ARMADILLO_LOCAL_VERSION} will be downloaded and built automatically" )
message ( STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'. " )
set ( armadillo_BRANCH ${ GNSSSDR_ARMADILLO_LOCAL_VERSION } )
set ( armadillo_RELEASE ${ armadillo_BRANCH } )
#############################################
# Check if GFORTRAN is found in the system
#############################################
if ( NOT OS_IS_MACOSX )
find_package ( GFORTRAN )
if ( NOT GFORTRAN )
message ( STATUS "The gfortran library has not been found." )
message ( STATUS " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
2018-11-24 17:40:34 +00:00
message ( STATUS " sudo yum install gcc-fortran" )
2018-11-19 07:51:05 +00:00
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
2018-11-24 17:40:34 +00:00
message ( STATUS " sudo zypper install gcc-fortran" )
else ( )
message ( STATUS " sudo apt-get install gfortran" )
endif ( )
2018-11-19 07:51:05 +00:00
message ( FATAL_ERROR "gfortran is required to build gnss-sdr" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
#############################################
# Download and build Armadillo
#############################################
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
ExternalProject_Add ( armadillo- ${ armadillo_RELEASE }
2018-11-19 07:51:05 +00:00
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E }
G I T _ R E P O S I T O R Y h t t p s : / / g i t l a b . c o m / c o n r a d s n i c t a / a r m a d i l l o - c o d e . g i t
G I T _ T A G $ { a r m a d i l l o _ B R A N C H }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / a r m a d i l l o / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E }
C M A K E _ A R G S - D C M A K E _ C X X _ C O M P I L E R = $ { C M A K E _ C X X _ C O M P I L E R } - D B U I L D _ S H A R E D _ L I B S = O F F - D C M A K E _ C X X _ F L A G S = - s t d = c + + 1 1
B U I L D _ C O M M A N D $ { C M A K E _ M A K E _ P R O G R A M }
U P D A T E _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
)
2018-11-24 17:40:34 +00:00
else ( )
ExternalProject_Add ( armadillo- ${ armadillo_RELEASE }
2018-11-19 07:51:05 +00:00
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E }
G I T _ R E P O S I T O R Y h t t p s : / / g i t l a b . c o m / c o n r a d s n i c t a / a r m a d i l l o - c o d e . g i t
G I T _ T A G $ { a r m a d i l l o _ B R A N C H }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / a r m a d i l l o / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E }
C M A K E _ A R G S - D C M A K E _ C X X _ C O M P I L E R = $ { C M A K E _ C X X _ C O M P I L E R } - D B U I L D _ S H A R E D _ L I B S = O F F - D C M A K E _ C X X _ F L A G S = - s t d = c + + 1 1
B U I L D _ C O M M A N D $ { C M A K E _ M A K E _ P R O G R A M }
B U I L D _ B Y P R O D U C T S $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E } / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } a r m a d i l l o $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
U P D A T E _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
)
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
# Set up variables
ExternalProject_Get_Property ( armadillo- ${ armadillo_RELEASE } binary_dir )
2019-02-03 18:24:44 +00:00
#set(ARMADILLO_INCLUDE_DIRS ${CMAKE_CURRENT_SOURCE_DIR}/thirdparty/armadillo/armadillo-${armadillo_RELEASE}/include)
2018-11-19 07:51:05 +00:00
if ( NOT GFORTRAN )
set ( GFORTRAN "" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
set ( ARMADILLO_LIBRARIES ${ BLAS } ${ LAPACK } ${ GFORTRAN } ${ binary_dir } / ${ CMAKE_FIND_LIBRARY_PREFIXES } armadillo ${ CMAKE_STATIC_LIBRARY_SUFFIX } )
set ( LOCAL_ARMADILLO true CACHE STRING "Armadillo downloaded and built automatically" FORCE )
set ( ARMADILLO_VERSION_STRING ${ armadillo_RELEASE } )
2019-02-03 18:24:44 +00:00
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_SOURCE_DIR } /thirdparty/armadillo/armadillo- ${ armadillo_RELEASE } /include )
add_library ( Armadillo::armadillo STATIC IMPORTED )
add_dependencies ( Armadillo::armadillo armadillo- ${ armadillo_RELEASE } )
set_target_properties ( Armadillo::armadillo PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { b i n a r y _ d i r } / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } a r m a d i l l o $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / a r m a d i l l o / a r m a d i l l o - $ { a r m a d i l l o _ R E L E A S E } / i n c l u d e "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { b i n a r y _ d i r } / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } a r m a d i l l o $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
)
2018-11-24 17:40:34 +00:00
endif ( )
2012-12-24 02:33:50 +00:00
2013-10-18 18:26:06 +00:00
2013-11-27 21:11:21 +00:00
################################################################################
2018-05-13 19:16:09 +00:00
# GnuTLS - https://www.gnutls.org/
2013-11-27 21:11:21 +00:00
################################################################################
2015-09-14 23:41:18 +00:00
find_package ( GnuTLS )
2015-10-27 19:18:48 +00:00
find_library ( GNUTLS_OPENSSL_LIBRARY NAMES gnutls-openssl libgnutls-openssl.so.27
2018-11-24 17:40:34 +00:00
H I N T S / u s r / l i b
/ u s r / l i b 6 4
/ u s r / l o c a l / l i b
/ u s r / l o c a l / l i b 6 4
/ o p t / l o c a l / l i b
/ u s r / l i b / x 8 6 _ 6 4 - l i n u x - g n u
/ u s r / l i b / a a r c h 6 4 - l i n u x - g n u
/ u s r / l i b / a r m - l i n u x - g n u e a b i h f
/ u s r / l i b / a r m - l i n u x - g n u e a b i
/ u s r / l i b / i 3 8 6 - l i n u x - g n u
/ u s r / l i b / a l p h a - l i n u x - g n u
/ u s r / l i b / h p p a - l i n u x - g n u
/ u s r / l i b / i 3 8 6 - g n u
/ u s r / l i b / i 6 8 6 - g n u
/ u s r / l i b / i 6 8 6 - l i n u x - g n u
/ u s r / l i b / x 8 6 _ 6 4 - k f r e e b s d - g n u
/ u s r / l i b / i 6 8 6 - k f r e e b s d - g n u
/ u s r / l i b / m 6 8 k - l i n u x - g n u
/ u s r / l i b / m i p s - l i n u x - g n u
/ u s r / l i b / m i p s 6 4 e l - l i n u x - g n u a b i 6 4
/ u s r / l i b / m i p s e l - l i n u x - g n u
/ u s r / l i b / p o w e r p c - l i n u x - g n u
/ u s r / l i b / p o w e r p c - l i n u x - g n u s p e
/ u s r / l i b / p o w e r p c 6 4 - l i n u x - g n u
/ u s r / l i b / p o w e r p c 6 4 l e - l i n u x - g n u
/ u s r / l i b / s 3 9 0 x - l i n u x - g n u
/ u s r / l i b / s p a r c 6 4 - l i n u x - g n u
/ u s r / l i b / x 8 6 _ 6 4 - l i n u x - g n u x 3 2
/ u s r / l i b / s h 4 - l i n u x - g n u
)
2016-09-21 18:37:52 +00:00
2015-10-27 19:18:48 +00:00
if ( NOT GNUTLS_OPENSSL_LIBRARY )
2018-11-19 07:51:05 +00:00
message ( STATUS "Looking for OpenSSL instead..." )
find_package ( OpenSSL )
if ( OPENSSL_FOUND )
2015-10-27 19:18:48 +00:00
set ( GNUTLS_INCLUDE_DIR ${ OPENSSL_INCLUDE_DIR } )
set ( GNUTLS_LIBRARIES "" )
set ( GNUTLS_OPENSSL_LIBRARY ${ OPENSSL_SSL_LIBRARY } )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( " The GnuTLS library with openssl compatibility enabled has not been found." )
message ( " You can try to install the required libraries by typing:" )
if ( OS_IS_LINUX )
2015-10-27 19:18:48 +00:00
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
2015-10-27 19:39:02 +00:00
message ( " sudo yum install openssl-devel" )
2018-11-24 17:40:34 +00:00
else ( )
2015-10-27 19:18:48 +00:00
message ( " sudo apt-get install libgnutls-openssl-dev" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
if ( OS_IS_MACOSX )
2015-10-27 19:18:48 +00:00
message ( " sudo port install gnutls" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
message ( FATAL_ERROR "GnuTLS libraries with openssl compatibility are required to build gnss-sdr" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2013-11-27 21:11:21 +00:00
2016-11-27 22:47:45 +00:00
2013-10-18 18:26:06 +00:00
2017-11-26 09:49:42 +00:00
########################################################################
# Matio - https://github.com/tbeu/matio
########################################################################
find_package ( MATIO )
2018-02-24 17:01:10 +00:00
if ( NOT MATIO_FOUND OR MATIO_VERSION_STRING VERSION_LESS ${ GNSSSDR_MATIO_MIN_VERSION } )
2018-02-24 17:28:52 +00:00
if ( MATIO_FOUND )
2018-11-19 07:51:05 +00:00
message ( STATUS " Matio installed version (${MATIO_VERSION_STRING}) is too old (>= ${GNSSSDR_MATIO_MIN_VERSION} is required)." )
2018-11-24 17:40:34 +00:00
endif ( )
2018-03-10 22:00:09 +00:00
message ( STATUS " Matio v${GNSSSDR_MATIO_LOCAL_VERSION} will be downloaded and built automatically" )
2018-02-24 17:28:52 +00:00
message ( STATUS " when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'. " )
2017-11-26 09:49:42 +00:00
find_package ( ZLIB )
if ( ZLIB_FOUND )
get_filename_component ( ZLIB_BASE_DIR ${ ZLIB_INCLUDE_DIRS } DIRECTORY )
2018-02-23 22:46:16 +00:00
if ( OS_IS_LINUX )
if ( NOT EXISTS "/usr/bin/libtoolize" )
message ( " libtool has not been found." )
message ( " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
message ( " sudo yum groupinstall 'Development Tools'" )
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
message ( " sudo zypper install libtoool" )
2018-11-24 17:40:34 +00:00
else ( )
2018-02-23 22:46:16 +00:00
message ( " sudo apt-get install libtool" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-02-23 22:46:16 +00:00
message ( FATAL_ERROR "libtool is required to build matio from source" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-12-08 22:16:10 +00:00
if ( EXISTS "/usr/bin/aclocal" OR
E X I S T S " / u s r / b i n / a c l o c a l - 1 . 1 6 " O R
E X I S T S " / u s r / b i n / a c l o c a l - 1 . 1 5 " O R
E X I S T S " / u s r / b i n / a c l o c a l - 1 . 1 4 " O R
E X I S T S " / u s r / b i n / a c l o c a l - 1 . 1 3 " O R
E X I S T S " / u s r / b i n / a c l o c a l - 1 . 1 1 " O R
E X I S T S " / u s r / b i n / a c l o c a l - 1 . 1 0 " )
2018-02-24 17:28:52 +00:00
message ( STATUS "Automake found." )
2018-11-24 17:40:34 +00:00
else ( )
2018-02-23 22:46:16 +00:00
message ( " aclocal has not been found." )
message ( " You can try to install it by typing:" )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
message ( " sudo yum groupinstall 'Development Tools'" )
elseif ( ${ LINUX_DISTRIBUTION } MATCHES "openSUSE" )
message ( " sudo zypper install automake" )
2018-11-24 17:40:34 +00:00
else ( )
2018-02-23 22:46:16 +00:00
message ( " sudo apt-get install automake" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-02-23 22:46:16 +00:00
message ( FATAL_ERROR "aclocal is required to build matio from source" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2017-11-26 09:49:42 +00:00
find_package ( HDF5 )
if ( HDF5_FOUND )
list ( GET HDF5_LIBRARIES 0 HDF5_FIRST_DIR )
get_filename_component ( HDF5_BASE_DIR2 ${ HDF5_FIRST_DIR } DIRECTORY )
get_filename_component ( HDF5_BASE_DIR ${ HDF5_BASE_DIR2 } DIRECTORY )
if ( OS_IS_MACOSX )
if ( EXISTS /opt/local/include/hdf5.h )
set ( HDF5_BASE_DIR /opt/local )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 09:49:42 +00:00
if ( EXISTS /usr/local/include/hdf5.h )
set ( HDF5_BASE_DIR /usr/local )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2019-02-03 18:24:44 +00:00
2017-11-26 09:49:42 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
ExternalProject_Add ( matio- ${ GNSSSDR_MATIO_LOCAL_VERSION }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / m a t i o
G I T _ R E P O S I T O R Y h t t p s : / / g i t h u b . c o m / t b e u / m a t i o
G I T _ T A G v $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / m a t i o / m a t i o - $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N }
U P D A T E _ C O M M A N D $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / m a t i o / m a t i o - $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N } / a u t o g e n . s h
C O N F I G U R E _ C O M M A N D $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / m a t i o / m a t i o - $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N } / c o n f i g u r e - - w i t h - h d f 5 = $ { H D F 5 _ B A S E _ D I R } - - w i t h - z l i b = $ { Z L I B _ B A S E _ D I R } - - w i t h - d e f a u l t - f i l e - v e r = 7 . 3 - - e n a b l e - m a t 7 3 = y e s - - p r e f i x = < I N S T A L L _ D I R >
2019-02-03 18:24:44 +00:00
B U I L D _ C O M M A N D $ ( M A K E )
2018-11-24 17:40:34 +00:00
)
else ( )
ExternalProject_Add ( matio- ${ GNSSSDR_MATIO_LOCAL_VERSION }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / m a t i o
G I T _ R E P O S I T O R Y h t t p s : / / g i t h u b . c o m / t b e u / m a t i o
G I T _ T A G v $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / m a t i o / m a t i o - $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N }
U P D A T E _ C O M M A N D $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / m a t i o / m a t i o - $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N } / a u t o g e n . s h
C O N F I G U R E _ C O M M A N D $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / m a t i o / m a t i o - $ { G N S S S D R _ M A T I O _ L O C A L _ V E R S I O N } / c o n f i g u r e - - w i t h - h d f 5 = $ { H D F 5 _ B A S E _ D I R } - - w i t h - z l i b = $ { Z L I B _ B A S E _ D I R } - - w i t h - d e f a u l t - f i l e - v e r = 7 . 3 - - e n a b l e - m a t 7 3 = y e s - - p r e f i x = < I N S T A L L _ D I R >
2019-02-03 18:24:44 +00:00
B U I L D _ C O M M A N D $ ( M A K E )
2018-11-24 17:40:34 +00:00
B U I L D _ B Y P R O D U C T S $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / m a t i o / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } m a t i o $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
)
endif ( )
2017-11-26 09:49:42 +00:00
set ( MATIO_LOCAL true )
2019-02-03 18:24:44 +00:00
if ( NOT TARGET Matio::matio )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_BINARY_DIR } /matio/include )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_BINARY_DIR } /matio/lib )
add_library ( Matio::matio SHARED IMPORTED )
add_dependencies ( Matio::matio matio- ${ GNSSSDR_MATIO_LOCAL_VERSION } )
set_target_properties ( Matio::matio PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / m a t i o / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } m a t i o $ { C M A K E _ S H A R E D _ L I B R A R Y _ S U F F I X } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / m a t i o / i n c l u d e "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / m a t i o / l i b / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } m a t i o $ { C M A K E _ S H A R E D _ L I B R A R Y _ S U F F I X } "
)
endif ( )
2018-11-24 17:40:34 +00:00
else ( )
2017-11-26 09:49:42 +00:00
message ( STATUS " The hdf5 library has not been found in your system." )
message ( STATUS " Please try to install it by doing:" )
if ( OS_IS_MACOSX )
message ( STATUS " $ sudo port install hdf5" )
message ( STATUS " or" )
message ( STATUS " $ brew install hdf5" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 09:49:42 +00:00
if ( OS_IS_LINUX )
message ( STATUS " $ sudo apt-get install libhdf5-dev" )
2018-11-24 17:40:34 +00:00
endif ( )
2017-11-26 09:49:42 +00:00
message ( FATAL_ERROR "*** The hdf5 library is required to build gnss-sdr" )
2018-11-24 17:40:34 +00:00
endif ( )
else ( )
2017-11-26 09:49:42 +00:00
message ( FATAL_ERROR "*** The zlib library is required to build gnss-sdr" )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2017-11-26 09:49:42 +00:00
2018-11-10 18:16:13 +00:00
################################################################################
# PugiXML - https://pugixml.org/
################################################################################
2018-11-21 07:28:50 +00:00
find_package ( PUGIXML QUIET )
if ( PUGIXML_FOUND )
2018-11-24 17:40:34 +00:00
message ( STATUS "PugiXML has been found." )
else ( )
2018-11-11 11:36:33 +00:00
message ( STATUS " PugiXML v${GNSSSDR_PUGIXML_LOCAL_VERSION} will be downloaded and built automatically when doing '${CMAKE_MAKE_PROGRAM_PRETTY_NAME}'." )
2018-11-11 11:27:01 +00:00
set ( PUGIXML_COMPILER -DCMAKE_CXX_COMPILER= ${ CMAKE_CXX_COMPILER } -DCMAKE_C_COMPILER= ${ CMAKE_C_COMPILER } )
set ( TOOLCHAIN_ARG "" )
if ( EXISTS $ENV{ OECORE_TARGET_SYSROOT } )
set ( PUGIXML_COMPILER "" )
set ( TOOLCHAIN_ARG "-DCMAKE_TOOLCHAIN_FILE=${CMAKE_CURRENT_SOURCE_DIR}/cmake/Toolchains/oe-sdk_cross.cmake" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-11 11:27:01 +00:00
if ( CMAKE_VERSION VERSION_LESS 3.2 )
2018-11-24 17:40:34 +00:00
ExternalProject_Add ( pugixml- ${ GNSSSDR_PUGIXML_LOCAL_VERSION }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
G I T _ R E P O S I T O R Y h t t p s : / / g i t h u b . c o m / z e u x / p u g i x m l
G I T _ T A G v $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / p u g i x m l / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
C M A K E _ A R G S $ { P U G I X M L _ C O M P I L E R } $ { T O O L C H A I N _ A R G }
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
I N S T A L L _ C O M M A N D " "
2018-11-11 11:27:01 +00:00
)
2018-11-24 17:40:34 +00:00
else ( )
ExternalProject_Add ( pugixml- ${ GNSSSDR_PUGIXML_LOCAL_VERSION }
P R E F I X $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
G I T _ R E P O S I T O R Y h t t p s : / / g i t h u b . c o m / z e u x / p u g i x m l
G I T _ T A G v $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
S O U R C E _ D I R $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / p u g i x m l / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
B I N A R Y _ D I R $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N }
C M A K E _ A R G S $ { P U G I X M L _ C O M P I L E R } $ { T O O L C H A I N _ A R G }
U P D A T E _ C O M M A N D " "
P A T C H _ C O M M A N D " "
B U I L D _ B Y P R O D U C T S $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N } / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } p u g i x m l $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X }
I N S T A L L _ C O M M A N D " "
2018-11-11 11:27:01 +00:00
)
2018-11-24 17:40:34 +00:00
endif ( )
2019-02-03 18:24:44 +00:00
if ( NOT TARGET Pugixml::pugixml )
file ( MAKE_DIRECTORY ${ CMAKE_CURRENT_SOURCE_DIR } /thirdparty/pugixml/pugixml- ${ GNSSSDR_PUGIXML_LOCAL_VERSION } /src )
add_library ( Pugixml::pugixml STATIC IMPORTED )
add_dependencies ( Pugixml::pugixml pugixml- ${ GNSSSDR_PUGIXML_LOCAL_VERSION } )
set_target_properties ( Pugixml::pugixml PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N } / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } p u g i x m l $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / t h i r d p a r t y / p u g i x m l / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N } / s r c "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / p u g i x m l - $ { G N S S S D R _ P U G I X M L _ L O C A L _ V E R S I O N } / $ { C M A K E _ F I N D _ L I B R A R Y _ P R E F I X E S } p u g i x m l $ { C M A K E _ S T A T I C _ L I B R A R Y _ S U F F I X } "
)
endif ( )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-10 18:16:13 +00:00
2017-11-26 09:49:42 +00:00
2016-11-27 22:47:45 +00:00
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
################################################################################
2014-11-14 20:42:22 +00:00
# Doxygen - http://www.stack.nl/~dimitri/doxygen/index.html (OPTIONAL, used if found)
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
################################################################################
find_package ( Doxygen )
if ( DOXYGEN_FOUND )
2018-11-19 07:51:05 +00:00
message ( STATUS "Doxygen found." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can build the documentation with '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc'." )
message ( STATUS " When done, point your browser to ${CMAKE_BINARY_DIR}/html/index.html" )
2018-11-19 07:51:05 +00:00
set ( HAVE_DOT ${ DOXYGEN_DOT_FOUND } )
file ( TO_NATIVE_PATH ${ CMAKE_SOURCE_DIR } top_srcdir )
file ( TO_NATIVE_PATH ${ CMAKE_BINARY_DIR } top_builddir )
find_package ( LATEX )
if ( PDFLATEX_COMPILER )
set ( GENERATE_PDF_DOCUMENTATION "YES" )
set ( GNSSSDR_USE_MATHJAX "NO" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
set ( GENERATE_PDF_DOCUMENTATION "NO" )
set ( GNSSSDR_USE_MATHJAX "YES" )
2018-11-24 17:40:34 +00:00
endif ( )
2018-11-19 07:51:05 +00:00
configure_file ( ${ CMAKE_SOURCE_DIR } /docs/doxygen/Doxyfile.in
$ { C M A K E _ B I N A R Y _ D I R } / d o c s / d o x y g e n / D o x y f i l e
@ O N L Y
)
add_custom_target ( doc
$ { D O X Y G E N _ E X E C U T A B L E } $ { C M A K E _ B I N A R Y _ D I R } / d o c s / d o x y g e n / D o x y f i l e
W O R K I N G _ D I R E C T O R Y $ { C M A K E _ B I N A R Y _ D I R }
C O M M E N T " G e n e r a t i n g A P I d o c u m e n t a t i o n w i t h D o x y g e n . " V E R B A T I M
)
if ( LATEX_COMPILER )
2019-02-21 08:59:06 +00:00
message ( STATUS " '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} pdfmanual' will generate a manual at ${CMAKE_BINARY_DIR}/docs/GNSS-SDR_manual.pdf" )
2018-11-19 07:51:05 +00:00
add_custom_target ( pdfmanual
C O M M A N D $ { C M A K E _ M A K E _ P R O G R A M }
C O M M A N D $ { C M A K E _ C O M M A N D } - E c o p y r e f m a n . p d f $ { C M A K E _ B I N A R Y _ D I R } / d o c s / G N S S - S D R _ m a n u a l . p d f
C O M M A N D $ { C M A K E _ M A K E _ P R O G R A M } c l e a n
D E P E N D S d o c
W O R K I N G _ D I R E C T O R Y $ { C M A K E _ B I N A R Y _ D I R } / d o c s / l a t e x
C O M M E N T " G e n e r a t i n g P D F m a n u a l w i t h D o x y g e n . " V E R B A T I M
)
2018-11-24 17:40:34 +00:00
endif ( )
2019-02-21 08:59:06 +00:00
message ( STATUS " '${CMAKE_MAKE_PROGRAM_PRETTY_NAME} doc-clean' will clean the documentation." )
2018-11-19 07:51:05 +00:00
add_custom_target ( doc-clean
C O M M A N D $ { C M A K E _ C O M M A N D } - E r e m o v e _ d i r e c t o r y $ { C M A K E _ B I N A R Y _ D I R } / d o c s / h t m l
C O M M A N D $ { C M A K E _ C O M M A N D } - E r e m o v e _ d i r e c t o r y $ { C M A K E _ B I N A R Y _ D I R } / d o c s / l a t e x
C O M M A N D $ { C M A K E _ C O M M A N D } - E r e m o v e $ { C M A K E _ B I N A R Y _ D I R } / d o c s / G N S S - S D R _ m a n u a l . p d f
C O M M E N T " C l e a n i n g d o c u m e n t a t i o n . " V E R B A T I M
)
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS " Doxygen has not been found in your system." )
message ( STATUS " You can get nice code documentation by using it!" )
message ( STATUS " Get it from http://www.stack.nl/~dimitri/doxygen/index.html" )
if ( OS_IS_LINUX )
if ( ${ LINUX_DISTRIBUTION } MATCHES "Fedora" OR ${ LINUX_DISTRIBUTION } MATCHES "Red Hat" )
message ( STATUS " or simply by doing 'sudo yum install doxygen-latex'." )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS " or simply by doing 'sudo apt-get install doxygen-latex'." )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2018-11-19 07:51:05 +00:00
if ( OS_IS_MACOSX )
message ( STATUS " or simply by doing 'sudo port install doxygen +latex'." )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
###############################################################################
# OpenCL (OPTIONAL)
###############################################################################
if ( ENABLE_OPENCL )
2018-11-21 07:28:50 +00:00
find_package ( OPENCL )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( $ENV{ DISABLE_OPENCL } )
set ( DISABLE_OPENCL TRUE )
2018-11-24 17:40:34 +00:00
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( DISABLE_OPENCL )
set ( OPENCL_FOUND FALSE )
2018-11-24 17:40:34 +00:00
else ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( OPENCL_FOUND )
message ( STATUS "OpenCL has been found and will be used by some processing blocks" )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable OpenCL use by doing 'cmake -DENABLE_OPENCL=OFF ..' " )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
2014-09-07 17:35:41 +00:00
if ( ENABLE_GENERIC_ARCH )
set ( OPENCL_FOUND FALSE )
message ( STATUS "ENABLE_GENERIC_ARCH is set to ON so the use of OpenCL has been disabled." )
2018-11-24 17:40:34 +00:00
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( NOT OPENCL_FOUND )
message ( STATUS "Processing blocks using OpenCL will not be built." )
2018-11-24 17:40:34 +00:00
endif ( )
else ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
set ( OPENCL_FOUND FALSE )
2018-11-24 17:40:34 +00:00
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
2016-11-27 22:47:45 +00:00
2015-08-25 17:01:02 +00:00
###############################################################################
# CUDA (OPTIONAL)
###############################################################################
if ( $ENV{ CUDA_GPU_ACCEL } )
2018-11-19 07:51:05 +00:00
message ( STATUS "CUDA_GPU_ACCEL environment variable found." )
2015-08-25 17:01:02 +00:00
set ( ENABLE_CUDA ON )
2018-11-24 17:40:34 +00:00
endif ( )
2015-08-25 17:01:02 +00:00
if ( ENABLE_CUDA )
2018-11-24 17:40:34 +00:00
find_package ( CUDA REQUIRED )
2018-11-19 07:51:05 +00:00
message ( STATUS "NVIDIA CUDA GPU Acceleration will be enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_CUDA=OFF ..'" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "NVIDIA CUDA GPU Acceleration will be not enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Enable it with 'cmake -DENABLE_CUDA=ON ..' to add support for GPU-based acceleration using CUDA." )
2018-11-24 17:40:34 +00:00
endif ( )
2015-08-25 17:01:02 +00:00
2018-05-16 09:36:37 +00:00
###############################################################################
# CUSTOM UDP PACKET SOURCE (OPTIONAL)
###############################################################################
if ( ENABLE_RAW_UDP )
2019-02-04 17:17:35 +00:00
message ( STATUS "High-optimized custom UDP IP packet source is enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_RAW_UDP=OFF ..'" )
2019-02-04 17:17:35 +00:00
find_package ( PCAP )
if ( NOT PCAP_FOUND )
message ( FATAL_ERROR "PCAP required to compile custom UDP packet sample source (with ENABLE_RAW_UDP=ON)" )
endif ( )
2018-11-24 17:40:34 +00:00
endif ( )
2017-08-07 17:29:05 +00:00
2019-02-04 17:17:35 +00:00
2017-02-13 16:20:49 +00:00
###############################################################################
# FPGA (OPTIONAL)
###############################################################################
if ( ENABLE_FPGA )
2018-11-19 07:51:05 +00:00
message ( STATUS "FPGA Acceleration will be enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_FPGA=OFF ..'" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "Fpga Acceleration will be not enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Enable it with 'cmake -DENABLE_FPGA=ON ..' to add support for GPU-based acceleration using the FPGA." )
2018-11-24 17:40:34 +00:00
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
2017-08-07 17:29:05 +00:00
2012-12-24 11:42:23 +00:00
################################################################################
2012-12-24 02:33:50 +00:00
# Setup of optional drivers
2012-12-24 11:42:23 +00:00
################################################################################
2015-03-03 17:07:26 +00:00
2019-02-04 21:44:45 +00:00
########################################
2019-02-04 17:17:35 +00:00
# USRP Hardware Driver (UHD) - OPTIONAL
2019-02-04 21:44:45 +00:00
########################################
2019-02-04 17:17:35 +00:00
if ( ENABLE_UHD )
find_package ( UHD )
if ( NOT UHD_FOUND )
set ( ENABLE_UHD OFF )
message ( STATUS " The USRP Hardware Driver (UHD) signal source will not be built," )
message ( STATUS " so all USRP-based front-ends will not be usable." )
message ( STATUS " Please check https://files.ettus.com/manual/" )
else ( )
set ( GR_REQUIRED_COMPONENTS UHD )
find_package ( Gnuradio )
if ( NOT TARGET Gnuradio::uhd )
add_library ( Gnuradio::uhd SHARED IMPORTED )
list ( GET GNURADIO_UHD_LIBRARIES 0 FIRST_DIR )
get_filename_component ( GNURADIO_UHD_DIR ${ FIRST_DIR } ABSOLUTE )
set_target_properties ( Gnuradio::uhd PROPERTIES
I M P O R T E D _ L I N K _ I N T E R F A C E _ L A N G U A G E S " C X X "
I M P O R T E D _ L O C A T I O N " $ { G N U R A D I O _ U H D _ D I R } "
I N T E R F A C E _ I N C L U D E _ D I R E C T O R I E S " $ { G N U R A D I O _ U H D _ I N C L U D E _ D I R S } "
I N T E R F A C E _ L I N K _ L I B R A R I E S " $ { G N U R A D I O _ U H D _ L I B R A R I E S } "
)
endif ( )
endif ( )
2018-11-24 17:40:34 +00:00
endif ( )
2015-03-03 17:07:26 +00:00
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
2019-02-04 21:44:45 +00:00
##########################################
2019-02-04 17:17:35 +00:00
# gr-osmosdr - OPTIONAL
2019-02-04 21:44:45 +00:00
# https://github.com/osmocom/gr-osmosdr
##########################################
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( $ENV{ RTLSDR_DRIVER } )
2018-11-19 07:51:05 +00:00
message ( STATUS "RTLSDR_DRIVER environment variable found." )
2014-12-15 16:39:22 +00:00
set ( ENABLE_OSMOSDR ON )
2018-11-24 17:40:34 +00:00
endif ( )
2015-03-03 17:07:26 +00:00
2014-12-15 16:39:22 +00:00
if ( ENABLE_OSMOSDR )
2018-11-21 07:28:50 +00:00
find_package ( GROSMOSDR )
Improve portability
In some architectures (e.g. alpha, hppa, powerpcspe, m68k, sh4, sparc64, x32) the package gr-osmosdr is not available. So when the package is build with -DENABLE_OSMOSDR=ON, it breaks on the mentioned architectures. This is expected behaviour (it breaks because a required dependency is not found), but prevents from building the package on such architectures. This commit introduces a small change: when compilation is called with
cmake -DENABLE_OSMOSDR=ON -DENABLE_PACKAGING=ON ..
then, the compilation does not break if gr-osmosdr is not found.
This commit also fixes building when UHD is present but gnuradio-uhd is not (for instance, in hurd-i386)
2017-04-12 16:06:04 +00:00
if ( GROSMOSDR_FOUND )
2018-11-19 07:51:05 +00:00
message ( STATUS "The driver for OsmoSDR and other front-ends (HackRF, bladeRF, Realtek's RTL2832U-based dongles, etc.) will be compiled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_OSMOSDR=OFF ..'" )
2018-11-24 17:40:34 +00:00
else ( )
Improve portability
In some architectures (e.g. alpha, hppa, powerpcspe, m68k, sh4, sparc64, x32) the package gr-osmosdr is not available. So when the package is build with -DENABLE_OSMOSDR=ON, it breaks on the mentioned architectures. This is expected behaviour (it breaks because a required dependency is not found), but prevents from building the package on such architectures. This commit introduces a small change: when compilation is called with
cmake -DENABLE_OSMOSDR=ON -DENABLE_PACKAGING=ON ..
then, the compilation does not break if gr-osmosdr is not found.
This commit also fixes building when UHD is present but gnuradio-uhd is not (for instance, in hurd-i386)
2017-04-12 16:06:04 +00:00
if ( ENABLE_PACKAGING )
2018-11-24 17:40:34 +00:00
message ( WARNING "gr-osmosdr has not been found. Source blocks depending on it will NOT be built." )
else ( )
message ( FATAL_ERROR "gr-osmosdr required to build gnss-sdr with the optional OSMOSDR driver" )
endif ( )
endif ( )
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "The (optional) driver for OsmoSDR and related front-ends is not enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Enable it with 'cmake -DENABLE_OSMOSDR=ON ..' to add support for OsmoSDR and other front-ends (HackRF, bladeRF, Realtek's RTL2832U-based USB dongles, etc.)" )
2018-11-24 17:40:34 +00:00
endif ( )
2012-12-24 02:33:50 +00:00
2019-02-04 17:17:35 +00:00
##############################################
# gr-iio - OPTIONAL
2019-02-04 21:44:45 +00:00
# IIO blocks for GNU Radio
# https://github.com/analogdevicesinc/gr-iio
2019-02-04 17:17:35 +00:00
##############################################
if ( ENABLE_PLUTOSDR OR ENABLE_FMCOMMS2 )
find_package ( GRIIO )
2019-02-22 19:54:41 +00:00
find_package ( LIBIIO )
2019-02-04 17:17:35 +00:00
endif ( )
2019-02-04 21:44:45 +00:00
###################################################################################
2019-02-04 17:17:35 +00:00
# libiio - OPTIONAL
2019-02-04 21:44:45 +00:00
# A cross platform library for interfacing with local and remote Linux IIO devices
# https://github.com/analogdevicesinc/libiio
###################################################################################
2019-02-04 17:17:35 +00:00
if ( ENABLE_AD9361 )
find_package ( LIBIIO )
endif ( )
##############################################
# TELEORBIT FLEXIBAND FRONTEND - OPTIONAL
##############################################
2015-03-03 17:07:26 +00:00
if ( $ENV{ FLEXIBAND_DRIVER } )
2018-11-19 07:51:05 +00:00
message ( STATUS "FLEXIBAND_DRIVER environment variable found." )
2015-03-03 17:07:26 +00:00
set ( ENABLE_FLEXIBAND ON )
2018-11-24 17:40:34 +00:00
endif ( )
2015-03-03 17:07:26 +00:00
if ( FLEXIBAND_DRIVER )
set ( ENABLE_FLEXIBAND ON )
2018-11-24 17:40:34 +00:00
endif ( )
2015-03-03 17:07:26 +00:00
if ( ENABLE_FLEXIBAND )
2018-11-19 07:51:05 +00:00
message ( STATUS "The Teleorbit Flexiband front-end source will be compiled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_FLEXIBAND=OFF ..'" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "The (optional) Teleorbit Flexiband front-end driver adapter is not enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Enable it with 'cmake -DENABLE_FLEXIBAND=ON ..' to add support for the Teleorbit Flexiband front-end." )
2018-11-24 17:40:34 +00:00
endif ( )
2019-02-04 17:17:35 +00:00
if ( ENABLE_FLEXIBAND )
find_package ( TELEORBIT )
if ( NOT TELEORBIT_FOUND )
message ( FATAL_ERROR "Teleorbit Flexiband GNU Radio driver required to build gnss-sdr with the optional FLEXIBAND adapter" )
endif ( )
endif ( )
##############################################
# GN3S - OPTIONAL
##############################################
if ( $ENV{ GN3S_DRIVER } )
message ( STATUS "GN3S_DRIVER environment variable found." )
set ( ENABLE_GN3S ON )
endif ( )
if ( GN3S_DRIVER )
set ( ENABLE_GN3S ON )
endif ( )
if ( ENABLE_GN3S )
message ( STATUS "The GN3S driver will be compiled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_GN3S=OFF ..'" )
2019-02-04 17:17:35 +00:00
find_package ( GRGN3S QUIET )
else ( )
message ( STATUS "The (optional and experimental) GN3S driver is not enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Enable it with 'cmake -DENABLE_GN3S=ON ..' to add support for the GN3S dongle." )
2019-02-04 17:17:35 +00:00
endif ( )
2019-02-04 21:44:45 +00:00
#######################################################
# CTTC's digital array beamformer prototype - OPTIONAL
#######################################################
2019-02-04 17:17:35 +00:00
if ( $ENV{ RAW_ARRAY_DRIVER } )
message ( STATUS "RAW_ARRAY_DRIVER environment variable found." )
set ( ENABLE_ARRAY ON )
endif ( )
if ( RAW_ARRAY_DRIVER )
set ( ENABLE_ARRAY ON )
endif ( )
if ( ENABLE_ARRAY )
message ( STATUS "CTTC's Antenna Array front-end driver will be compiled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " You can disable it with 'cmake -DENABLE_ARRAY=OFF ..'" )
2019-02-04 17:17:35 +00:00
find_package ( GRDBFCTTC QUIET )
else ( )
message ( STATUS "The (optional) CTTC's Antenna Array front-end driver is not enabled." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Enable it with 'cmake -DENABLE_ARRAY=ON ..' to add support for the CTTC experimental array front-end." )
2019-02-04 17:17:35 +00:00
endif ( )
2013-10-18 18:26:06 +00:00
2012-12-25 10:28:29 +00:00
2016-11-27 22:47:45 +00:00
################################################################################
2019-02-04 21:44:45 +00:00
# GPerftools - https://github.com/gperftools/gperftools - OPTIONAL)
2016-11-27 22:47:45 +00:00
################################################################################
if ( ENABLE_GPERFTOOLS )
2018-11-21 07:28:50 +00:00
find_package ( GPERFTOOLS )
2018-11-19 07:51:05 +00:00
if ( NOT GPERFTOOLS_FOUND )
2016-11-27 22:47:45 +00:00
message ( STATUS "Although ENABLE_GPERFTOOLS has been set to ON, GPerftools has not been found." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Binaries will be compiled without 'tcmalloc' and 'profiler' libraries." )
message ( STATUS " You can install GPerftools from https://github.com/gperftools/gperftools" )
2018-11-24 17:40:34 +00:00
else ( )
2018-11-19 07:51:05 +00:00
message ( STATUS "GPerftools libraries found." )
2019-02-21 08:59:06 +00:00
message ( STATUS " Binaries will be compiled with 'tcmalloc' and 'profiler' libraries." )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( ENABLE_GPERFTOOLS )
# Set GPerftools related flags if it is available
2018-05-13 19:16:09 +00:00
# See https://github.com/gperftools/gperftools/blob/master/README
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( GPERFTOOLS_FOUND )
2018-11-17 13:31:06 +00:00
if ( ( CMAKE_CXX_COMPILER_ID STREQUAL "GNU" ) AND NOT WIN32 )
2019-02-24 13:11:21 +00:00
add_compile_options ( -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free )
2018-11-24 17:40:34 +00:00
endif ( )
Improving handling of optional processing blocks and linking libraries.
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
2014-08-07 19:04:01 +00:00
if ( CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
2019-02-24 13:11:21 +00:00
add_compile_options ( -fno-builtin )
2018-11-24 17:40:34 +00:00
endif ( )
endif ( )
endif ( )
2012-12-24 02:33:50 +00:00
2016-11-27 22:47:45 +00:00
########################################################################
# GNU gprof (OPTIONAL) - https://sourceware.org/binutils/docs/gprof/
########################################################################
2015-05-03 08:15:51 +00:00
if ( ENABLE_GPROF )
2019-02-24 13:11:21 +00:00
add_compile_options ( -pg )
2018-11-19 07:51:05 +00:00
set ( CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -pg" )
set ( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -pg" )
2018-11-24 17:40:34 +00:00
endif ( )
2015-05-03 08:15:51 +00:00
2016-11-27 22:47:45 +00:00
########################################################################
# Set compiler flags
########################################################################
2018-11-17 13:31:06 +00:00
if ( ( CMAKE_CXX_COMPILER_ID STREQUAL "GNU" ) AND NOT WIN32 )
2019-02-24 13:11:21 +00:00
# Add warning flags
# For "-Wall" see https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
2019-02-24 18:17:32 +00:00
set ( cxx_warning_flags -Wall -Wextra )
2019-02-24 19:22:15 +00:00
if ( NOT ( CMAKE_VERSION VERSION_LESS "3.3" ) )
add_compile_options ( "$<$<COMPILE_LANGUAGE:CXX>:${cxx_warning_flags}>" )
else ( )
add_compile_options ( "$<$<STREQUAL:$<TARGET_PROPERTY:LINKER_LANGUAGE>,CXX>:${cxx_warning_flags}>" )
endif ( )
if ( CMAKE_CXX_COMPILER_VERSION VERSION_LESS "5.0" )
add_compile_options ( -Wno-missing-field-initializers )
endif ( )
2019-02-24 13:11:21 +00:00
if ( CMAKE_CROSSCOMPILING )
add_compile_options ( -Wno-psabi )
endif ( )
2018-11-24 17:40:34 +00:00
endif ( )
2017-08-07 09:08:05 +00:00
2016-11-27 22:47:45 +00:00
# Processor-architecture related flags
2018-05-13 19:16:09 +00:00
# See https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html
2019-02-24 13:11:21 +00:00
if ( ( CMAKE_CXX_COMPILER_ID STREQUAL "GNU" ) AND NOT WIN32 )
if ( OS_IS_MACOSX )
add_compile_options ( -march=corei7 -mfpmath=sse )
else ( )
if ( NOT ENABLE_GENERIC_ARCH )
if ( IS_ARM )
# ARM-specific options
# See https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
if ( NOT CMAKE_CROSSCOMPILING )
if ( ARM_VERSION STREQUAL "arm" )
# Unknown arm version - try our best to detect
add_compile_options ( -mcpu=native )
else ( )
add_compile_options ( -march= ${ ARM_VERSION } )
endif ( )
endif ( )
else ( )
add_compile_options ( -march=native -mfpmath=sse )
endif ( )
endif ( )
endif ( )
endif ( )
2012-12-24 11:20:23 +00:00
2016-11-27 22:47:45 +00:00
2018-12-08 22:16:10 +00:00
########################################################################
# clang-tidy https://clang.llvm.org/extra/clang-tidy/index.html
########################################################################
if ( CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
if ( NOT ( CMAKE_VERSION VERSION_LESS "3.6" ) )
find_program (
C L A N G _ T I D Y _ E X E
N A M E S " c l a n g - t i d y "
D O C " P a t h t o c l a n g - t i d y e x e c u t a b l e "
)
if ( NOT CLANG_TIDY_EXE )
message ( STATUS "clang-tidy not found." )
else ( )
message ( STATUS "clang-tidy found: ${CLANG_TIDY_EXE}" )
2019-02-21 08:59:06 +00:00
if ( ENABLE_CLANG_TIDY )
message ( STATUS " clang-tidy will be used in compilation. You can disable it with 'cmake -DENABLE_CLANG_TIDY=OFF ..'" )
else ( )
message ( STATUS " You can enable clang-tidy usage in compilation with 'cmake -DENABLE_CLANG_TIDY=ON ..'" )
endif ( )
set ( DO_CLANG_TIDY "${CLANG_TIDY_EXE}" "-fix" )
2018-12-08 22:16:10 +00:00
set ( CMAKE_EXPORT_COMPILE_COMMANDS ON )
endif ( )
endif ( )
endif ( )
2013-07-04 13:47:40 +00:00
2013-07-10 21:07:43 +00:00
########################################################################
# Create uninstall target
########################################################################
configure_file (
2014-11-04 00:10:58 +00:00
$ { C M A K E _ C U R R E N T _ S O U R C E _ D I R } / c m a k e / c m a k e _ u n i n s t a l l . c m a k e . i n
2013-07-10 21:07:43 +00:00
$ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / c m a k e _ u n i n s t a l l . c m a k e
2014-11-04 00:10:58 +00:00
@ O N L Y )
2013-07-10 21:07:43 +00:00
add_custom_target ( uninstall
2014-11-04 00:10:58 +00:00
C O M M A N D $ { C M A K E _ C O M M A N D } - P $ { C M A K E _ C U R R E N T _ B I N A R Y _ D I R } / c m a k e _ u n i n s t a l l . c m a k e )
2013-01-22 20:40:25 +00:00
2016-11-27 22:47:45 +00:00
2012-12-24 02:33:50 +00:00
########################################################################
# Add subdirectories (in order of deps)
########################################################################
add_subdirectory ( src )