Carles Fernandez
3477f41198
Add local definition of to_time_t to be compatible with Boost < 1.58
2018-11-07 19:27:26 +01:00
Javier
ea3db59fd7
Adding Tele Command status for reporting the Position, Speed and Course over ground and Time
2018-11-06 14:39:57 +01:00
Javier
01a1954b15
Adding the Hotstart telecommand implementation to predict visible satellites for GPS and Galileo constellations
2018-11-05 17:53:53 +01:00
Carles Fernandez
40efd08b56
Fix typo
2018-11-04 19:52:20 +01:00
Carles Fernandez
766cc308bd
Fix crash after the first fix in some signal combinations
2018-11-04 19:49:26 +01:00
Carles Fernandez
6b854c3513
Fix segmentation fault under certain output combinations
2018-11-03 10:50:19 +01:00
Carles Fernandez
0139447408
Deactivate RTCM printer if not used
2018-11-02 14:12:31 +01:00
Carles Fernandez
7c238bfb44
Add RTCM messages for more signal combinations
2018-11-02 12:15:28 +01:00
Carles Fernandez
15df79837f
Fix header in RINEX nav file for L1+L5
2018-11-01 20:10:41 +01:00
Carles Fernandez
1ca28873ab
Fix warnings
2018-11-01 19:10:50 +01:00
Carles Fernandez
247c8cc6f3
Enable RINEX printer for more combinations of signals
2018-11-01 17:50:06 +01:00
Carles Fernandez
39a062ca00
Save PVT dump also in .mat. New parameter dump_mat can disable this feature
2018-10-31 14:56:59 +01:00
Carles Fernandez
902c90ef44
Allow to save the PVT dump file anywhere
2018-10-30 11:41:15 +01:00
Carles Fernandez
19dca87427
Warn if output files cannot be written.
2018-10-28 02:02:28 +02:00
Carles Fernandez
b183fe63ba
Improve PVT block configuration. Allow to store data products in different folders
2018-10-28 00:42:28 +02:00
Carles Fernandez
49769059a7
Store GPS almanac
2018-10-25 11:10:30 +02:00
Carles Fernandez
bc058d33da
Read GPS almanac file if present
2018-10-25 11:01:29 +02:00
Carles Fernandez
20302ed28f
Read Almanac data from AGNSS
2018-10-25 00:52:29 +02:00
Carles Fernandez
07d1a74f6b
Decode and store Galileo almanac
2018-10-24 17:28:12 +02:00
Carles Fernandez
2acdbc31f2
Store Galileo UTC data in xml file if leap second is not zero
2018-10-21 19:28:54 +02:00
Carles Fernandez
15c4d62096
Add Glonass assistance
2018-10-20 19:30:32 +02:00
Carles Fernandez
a10b1fe0f4
Store and read CNAV UTC parameters in Assisted mode
2018-10-19 14:48:41 +02:00
Carles Fernandez
6f6bb21c76
Sort out names when storing XML files
2018-10-19 13:48:21 +02:00
Carles Fernandez
79ae0a6c9d
Fix writing of XML files. Previously, the tag boost_serialization was not closed, which caused a failure when trying to read those XML files with Boost >= 1.66
2018-10-06 20:10:16 +02:00
Javier Arribas
d241da5d35
Added RTKLib solver unit test
2018-10-05 11:49:11 +02:00
Carles Fernandez
78c0b76cb9
Avoid use of GLOB for source and header files
2018-10-04 22:35:44 +02:00
Javier Arribas
a3dc0f564c
Improving PVT system test. Extending the rtklib_solver binary dumps and removing old dumps
2018-08-29 18:53:03 +02:00
Carles Fernandez
c9413e8931
Replace map.size() > 0 by map.empty == false
2018-08-16 10:20:03 +02:00
Carles Fernandez
273ce31029
Add more extensive use of cstdint typenames
2018-08-11 23:03:41 +02:00
Carles Fernandez
8f52b04c9c
Safer place for definition of namespaces
2018-07-21 13:57:14 +02:00
Carles Fernandez
826e51ef13
Handle boost/math/common_factor_rt.hpp header deprecation in Boost 1.67, replaced by boost/integer/common_factor_rt.hpp which is available since Boost 1.58. The boost/math/common_factor_rt.hpp is kept for older versions of boost, so it can still build in old distributions such as Debian 8.10
2018-07-21 13:40:52 +02:00
Carles Fernandez
30b41344ec
Revert "Replace deprecated boost/math/common_factor_rt.hpp header by boost/integer/common_factor_rt.hpp"
...
This reverts commit f3b07090e2
2018-06-15 21:25:30 +02:00
Carles Fernandez
f3b07090e2
Replace deprecated boost/math/common_factor_rt.hpp header by boost/integer/common_factor_rt.hpp
2018-06-15 17:22:40 +02:00
Carles Fernandez
e67941510e
Adjust number of decimals shown in terminal
2018-06-07 20:25:25 +02:00
Javier Arribas
7dc9eafcee
Display position timestamps back in UTC
2018-06-07 12:23:26 +02:00
Carles Fernandez
a2a9fef7f7
Make RINEX (nav & obs) annotation rate configurable
2018-06-05 21:41:13 +02:00
Javier Arribas
9a5b426059
final release of observables and PVT receiver time fix for 1 ms integer granularity
2018-06-05 18:20:55 +02:00
Javier Arribas
908aa1515f
Observables and all PVT products now are referenced to the uncorrected RX clock, that is guaranteed to be integer multiple of 1 ms
2018-06-02 12:55:00 +02:00
Javier Arribas
6d4a89148a
Fix observables clock drift bug (Candidate one)
2018-05-18 21:07:12 +02:00
Javier Arribas
2b7663e70c
Fix in rx time correction and adding the missing code phase to the observables. More test required
2018-05-17 18:10:48 +02:00
Carles Fernandez
0d60d97c24
Use https instead of http in links when available
...
Update copyright year in headers
2018-05-13 22:49:11 +02:00
Álvaro Cebrián Juan
f1a77dfb1f
Initialize gpx printer in RTKLIB_PVT block
2018-05-05 07:47:42 +02:00
Antonio Ramos
ebb908f2e7
Merge branch 'next' into observables_and_display_color
2018-04-03 11:01:59 +02:00
Carles Fernandez
1eede79e7f
Integrate unified block for DLL/PLL Tracking
2018-03-29 12:54:03 +02:00
Carles Fernandez
97e5d88623
Minor fixes: typos, includes
2018-03-26 15:06:14 +02:00
Damian Miralles
287d38dea2
GLONASS L2 CA Signal Addition
...
Adds GLONASS L2 C/A signal processing to GNSS-SDR based on previous
work developed for the L1 signal. All code have been added in a single
commit with the idea to illustrate the process of signal addition for
future work
2018-03-24 12:44:26 -06:00
Antonio Ramos
cc887402b1
Merge branch 'unify_tracking' into observables_and_display_color
2018-03-19 14:50:00 +01:00
Antonio Ramos
e4bada8176
Handle RTCM printer exceptions
2018-03-13 11:16:30 +01:00
Antonio Ramos
ab7cabc8e8
code style
2018-03-08 18:32:55 +01:00
Antonio Ramos
93d2fdaf14
debug 9
2018-03-08 18:05:22 +01:00
