Fixes bug in TOW update when a new value has been computed. This adds a
new flag to keep track of TOW update given the tk component. The code
fix improves the pseudorange measurement for code
Based on reference [2] of the lock_detectors file the accumulation
length for GLONASS satellite should be reduced to 10 ms instead of the
default value of 20. Because of the meander sequence of GLONASS system
the effective data bit is of length 10 ms as seen by tracking modules
Adds code to solve the shared frequency channels for GLONASS satellites
during acq and trk, it is now decode responsability to fix the identifier
when decoding of ephemeris happens. It also adds more details in tracking
plotting and fixes silly bug that created false alarm.
The code fixes the computation of the carrier frequency for pcps
acquisition of GLONASS satellites by making it relative to the IF. Also
new plotting features are added to visualize results
GNSS-SDR.internal_fs_sps
The old name was misleading, since the units are samples per second and
not Hertz.
Backward compatibility is kept, so this change does not break any
existing configuration.
Adds tracking results plot for GLONASS processing following code for
GPS. Also fix a couple of bugs in the code and address bugs from
acq and trk modules
Packages using CMake often use file(GLOB ...) to retrieve a list of
source files. As this is based on readdir(), the resulting file list
is unsorted. A common use case is to pass this list directly to
add_executable or add_library. But as the order is unpredictable, the
binaries are not reproducible (because the order in which the objects
are linked will vary).
See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=824263
message system. Removing the deprecated channel internal queue and its
references. Some tests that are using the old channel queue are disabled
in this version
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
Now we are reading the assistance data from xml files if the correct
configuration option is set; defined the name for the xml files as
const inside control_thread.h; and finally moved the manipulation
of these files to the gnss_sdr_supl_client class, not anymore inside
the control_thread.
Signed-off-by: Javier Arribas <jarribas@cttc.es>
- Bug fixes at Galileo telemetry decoder state machine
- Bug fixes at Galileo Ephemeris decoder (two complement's data interpreted as unsigned, mismatch at the LSB weights)
Galileo KML output is avalable!!
Galileo RINEX is still under construction
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@433 64b25241-fba3-4117-9849-534c7e92360d
Bug fix in galileo tracking
Several improvements in Galileo telemetry decoder.
Code cleaning in observables
Galileo PVT is able to decode Galileo time and get satellite ECEF positions
Galileo PVT soluton is still under development
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@432 64b25241-fba3-4117-9849-534c7e92360d
- Updated all available trackings to generate the tracking_timestamp_secs taking into account the remainder code phase.
- Updated the telemetry decoder to track the number of symbol shifted from the preamble start symbol (to be used in observables).
- Updated observables to align the reference channel symbol with the corresponding symbols in the other channels and compute pseudorranges using the common transmission time algorithm.
- Updated PVT to independize the display output rate from the RINEX and KML log files. New options available in config file!
- Some minor improvements and code cleaning.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@193 64b25241-fba3-4117-9849-534c7e92360d
- The executable file and the default configuration file is now changed from "./install/mercurio" and "./conf/mercurio.conf" to "./install/gnss-sdr" and "./conf/gnss-sdr.conf", respectively.
- Configuration file structure changed to define in a single entry the internal sampling frequency (after the signal conditioner). NOTICE that this change affects the all the adapters (acquisition, tracking, telemetry_decoder, observables, and PVT). All the adapters are now modified to work with this feature.
- Moved several in-line GPS L1 CA parameters (a.k.a magic numbers..) to ./src/core/system_parameters/GPS_L1_CA.h definition file.
- Tracking blocks now uses DOUBLE values in their outputs.
- Observables and PVT now are separated. PVT and their associated libraries are moved to ./src/algorithms/PVT
- Temporarily disabled the RINEX output (I am working on that!)
- GNSS-SDR screen output now gives extended debug information of the receiver status and events. In the future, this output will be redirected to a log file.
- Bug fixes:
- FILE_SIGNAL_SOURCE now works correctly when the user configures GNSS-SDR to process the entire file.
- GPS_L1_CA_DLL_PLL now computes correctly the PRN start values.
- GPS_L1_CA_DLL_FLL_PLL now computes correctly the PRN start values.
- Several modifications in GPS_L1_CA_Telemetry_Decoder, GPS_L1_CA_Observables, and GPS_L1_CA_PVT modules to fix the GPS position computation.
- New features
- Tracking blocks perform a signal integrity check against NaN outliers before the correlation process.
- Tracking and PVT binary dump options are now documented and we provide MATLAB libraries and sample files to read it. Available in ./utils/matlab" and "./utils/matlab/libs"
- Observables output rate can be configured. This option enables the GPS L1 CA PVT computation at a maximum rate of 1ms.
- GPS_L1_CA_PVT now can perform a moving average Latitude, Longitude, and Altitude output for each of the Observables output. It is configurable using the configuration file.
- Added Google Earth compatible Keyhole Markup Language (KML) output writer class (./src/algorithms/PVT/libs/kml_printer.h and ./src/algorithms/PVT/libs/kml_printer.cc ). You can see the receiver position directly using Google Earth.
- We provide a master configuration file which includes an in-line documentation with all the new (and old) options. It can be found in ./conf/master.conf
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@84 64b25241-fba3-4117-9849-534c7e92360d
