This is simply exposed as a table from tag -> true. While this is less
natural than an array, it allows for easy esting of whether a tag is
present.
Closes#461
- Use texture over texture2D - the latter was deprecated in GLSL 1.30.
- Cache the tbo buffer - this saves an allocation when monitors update.
Closes#455. While the rest of the PR has some nice changes, it
performs signlificantly worse on my system.
This moves monitor networking into its own packet, rather than serialising
using NBT. This allows us to be more flexible with how monitors are
serialised.
We now compress terminal data using gzip. This reduces the packet size
of a max-sized-monitor from ~25kb to as little as 100b.
On my test set of images (what I would consider to be the extreme end of
the "reasonable" case), we have packets from 1.4kb bytes up to 12kb,
with a mean of 6kb. Even in the worst case, this is a 2x reduction in
packet size.
While this is a fantastic win for the common case, it is not abuse-proof.
One can create a terminal with high entropy (and so uncompressible). This
will still be close to the original packet size.
In order to prevent any other abuse, we also limit the amount of monitor
data a client can possibly receive to 1MB (configurable).
timetout, max_upload, max_download and max_websocket_message may now be
configured on a domain-by-domain basis. This uses the same system that
we use for the block/allow-list from before:
Example:
[[http.rules]]
host = "*"
action = "allow"
max_upload = 4194304
max_download = 16777216
timeout = 30000
This registers IPeripheral as a capability. As a result, all (Minecraft
facing) functionality operates using LazyOptional<_>s instead.
Peripheral providers should now return a LazyOptional<IPeripheral> too.
Hopefully this will allow custom peripherals to mark themselves as
invalid (say, because a dependency has changed).
While peripheral providers are somewhat redundant, they still have their
usages. If a peripheral is applied to a large number of blocks (for
instance, all inventories) then using capabilities does incur some
memory overhead.
We also make the following changes based on the above:
- Remove the default implementation for IWiredElement, migrating the
definition to a common "Capabilities" class.
- Remove IPeripheralTile - we'll exclusively use capabilities now.
Absurdly this is the most complex change, as all TEs needed to be
migrated too.
I'm not 100% sure of the correctness of this changes so far - I've
tested it pretty well, but blocks with more complex peripheral logic
(wired/wireless modems and turtles) are still a little messy.
- Remove the "command block" peripheral provider, attaching a
capability instead.
When creating a peripheral or custom Lua object, one must implement two
methods:
- getMethodNames(): String[] - Returns the name of the methods
- callMethod(int, ...): Object[] - Invokes the method using an index in
the above array.
This has a couple of problems:
- It's somewhat unwieldy to use - you need to keep track of array
indices, which leads to ugly code.
- Functions which yield (for instance, those which run on the main
thread) are blocking. This means we need to spawn new threads for
each CC-side yield.
We replace this system with a few changes:
- @LuaFunction annotation: One may annotate a public instance method
with this annotation. This then exposes a peripheral/lua object
method.
Furthermore, this method can accept and return a variety of types,
which often makes functions cleaner (e.g. can return an int rather
than an Object[], and specify and int argument rather than
Object[]).
- MethodResult: Instead of returning an Object[] and having blocking
yields, functions return a MethodResult. This either contains an
immediate return, or an instruction to yield with some continuation
to resume with.
MethodResult is then interpreted by the Lua runtime (i.e. Cobalt),
rather than our weird bodgey hacks before. This means we no longer
spawn new threads when yielding within CC.
- Methods accept IArguments instead of a raw Object array. This has a
few benefits:
- Consistent argument handling - people no longer need to use
ArgumentHelper (as it doesn't exist!), or even be aware of its
existence - you're rather forced into using it.
- More efficient code in some cases. We provide a Cobalt-specific
implementation of IArguments, which avoids the boxing/unboxing when
handling numbers and binary strings.
This uses the system described in #409, to render monitors in a more
efficient manner.
Each monitor is backed by a texture buffer object (TBO) which contains
a relatively compact encoding of the terminal state. This is then
rendered using a shader, which consumes the TBO and uses it to index
into main font texture.
As we're transmitting significantly less data to the GPU (only 3 bytes
per character), this effectively reduces any update lag to 0. FPS appears
to be up by a small fraction (10-15fps on my machine, to ~110), possibly
as we're now only drawing a single quad (though doing much more work in
the shader).
On my laptop, with its Intel integrated graphics card, I'm able to draw
120 full-sized monitors (with an effective resolution of 3972 x 2330) at
a consistent 60fps. Updates still cause a slight spike, but we always
remain above 30fps - a significant improvement over VBOs, where updates
would go off the chart.
Many thanks to @Lignum and @Lemmmy for devising this scheme, and helping
test and review it! ♥
Unknown blit colours, such as " " will be translated to black for the
background or white for the foreground. This restores the behaviour from
before #412.
- Write to a PacketBuffer instead of generating an NBT tag. This is
then converted to an NBT byte array when we send across the network.
- Pack background/foreground colours into a single byte.
This derives from some work I did back in 2017, and some of the changes
made/planned in #409. However, this patch does not change how terminals
are represented, it simply makes the transfer more compact.
This makes the patch incredibly small (100 lines!), but also limited in
what improvements it can make compared with #409. We send 26626 bytes
for a full-sized monitor. While a 2x improvement over the previous 58558
bytes, there's a lot of room for improvement.
- Remove the parenthesis around the text (so it's now
"Computer ID: 12"), rather than "(Computer ID: 12").
- Show the tooltip if the computer has an ID and no label (as well as
when in advanced mode).
This replaces the allow/block lists with a series of rules. Each rule
takes the form
[[http.rules]]
host = "127.0.0.0/8"
action = "block"
This is pretty much the same as the previous config style, in that hosts
may be domains, wildcards or in CIDR notation. However, they may also be
mixed, so you could allow a specific IP, and then block all others.
This is a backport of 1.15's terminal rendering code with some further
improvements. This duplicates a fair bit of code, and is much more
efficient.
I expect the work done in #409 will supersede this, but that's unlikely
to make its way into the next release so it's worth getting this in for
now.
- Refactor a lot of common terminal code into
`FixedWithFontRenderer`. This shouldn't change any behaviour, but
makes a lot of our terminal renderers (printed pages, terminals,
monitors) a lot cleaner.
- Terminal rendering is done using a single mode/vertex format. Rather
than drawing an untextured quad for the background colours, we use an
entirely white piece of the terminal font. This allows us to batch
draws together more elegantly.
- Some minor optimisations:
- Skip rendering `"\0"` and `" "` characters. These characters occur
pretty often, especially on blank monitors and, as the font is empty
here, it is safe to skip them.
- Batch together adjacent background cells of the same colour. Again,
most terminals will have large runs of the same colour, so this is a
worthwhile optimisation.
These optimisations do mean that terminal performance is no longer
consistent as "noisy" terminals will have worse performance. This is
annoying, but still worthwhile.
- Switch monitor rendering over to use VBOs.
We also add a config option to switch between rendering backends. By
default we'll choose the best one compatible with your GPU, but there
is a config option to switch between VBOS (reasonable performance) and
display lists (bad).
When benchmarking 30 full-sized monitors rendering a static image, this
improves my FPS[^1] from 7 to 95. This is obviously an extreme case -
monitor updates are still slow, and so more frequently updating screens
will still be less than stellar.
[^1]: My graphics card is an Intel HD Graphics 520. Obviously numbers
will vary.
This would return true for any block with a fluid in it, including
waterlogged blocks. This resulted in much broken behaviour
- Turtles cannot place blocks when waterlogged (fixedd #385)
- Turtles could move into waterlogged blocks (such as fences),
replacing them.
