demultiplexed signal files (interleaved I/Q byte-size files,
post-process only).
Use sample configuration file gnss-sdr_Hybrid_byte.conf to try it!
Go to http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html
to obtain free captures from Fraunhofer
New options ENABLE_GN3S, ENABLE_RTLSDR, ENABLE_OPENCL, ENABLE_ARRAY and
ENABLE_GPERFTOOLS, all set by default to OFF. Users can enable that
features by 'cmake -DENABLE_XXX=ON ../ '. OpenCL is now not used by
default since it was giving problems in some platforms. Old variables
(RTSDR_DRIVER, GN3S_DRIVER, RAW_ARRAY_DRIVER and DISABLE_OPENCL) are
still honored and can be used in the same way, but the new ENABLE_XXX
are recommended for the sake of more uniform naming. Main CMakeFile.txt
has been rearranged, putting options first, then searching for the
required libraries, and then the optional ones. If Gperftools is enabled
and found, binaries are linked to the tcmalloc and profiler libraries,
and using the adequate flags. Fixed building in Mac OSX if Armadillo and
OpenBLAS were not installed in the system.
gps_l1_ca_pcps_multithread_acquisition
gps_l1_ca_pcps_tong_acquisition
galileo_e1_pcps_cccwsr_ambiguous_acquisition
galileo_e1_pcps_tong_ambiguous_acquisition
galileo_e1_pcps_8ms_ambiguous_acquisition
and test for all the algorithms.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@411 64b25241-fba3-4117-9849-534c7e92360d
- New SUPL parameters available in GNSS-SDR.conf
- Ephemeris assistance for real-time operation is now functional
- SUPL client now stores the received ephemeris in XML file. This file can be loaded on request to enable post-processing SUPL assistance and to enable SUPL assistance without internet connection. -> thowards a complete warm start GNSS-SDR.
BUG FIXES:
- GN3S driver firmware file copy operation in CmakeLists.txt had an error that mismatches the gn3s_firmware.ihx file location and prevents the correct firmware loading for GN3S SiGe USB dongles.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@351 64b25241-fba3-4117-9849-534c7e92360d
Example:
$ cd build
$ export GN3S_DRIVER=1
$ cmake ../
$ make
$ make install
The gr-gn3s project can be build and installed independently, for instance for using it as a source block in gnuradio-companion.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@300 64b25241-fba3-4117-9849-534c7e92360d
- Added a pre-compiled custom GN3S firmware.
- Added a fully-compliant GNU Radio source block for GN3S USB dongle. It can be used also from GNU Radio companion and from Python applications.
- Added a new GN3S_Signal_Source block. It is possible to disable the GN3S signal source compilation. See README.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@217 64b25241-fba3-4117-9849-534c7e92360d
./gnss-sdr --config_file="my_receiver.conf"
and another --signal_source flag that, if specified, overrides the file in the configuration:
./gnss-sdr --signal_source=/path/to/file.dat
Requires gflags 1.6 or later.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@100 64b25241-fba3-4117-9849-534c7e92360d
- The executable file and the default configuration file is now changed from "./install/mercurio" and "./conf/mercurio.conf" to "./install/gnss-sdr" and "./conf/gnss-sdr.conf", respectively.
- Configuration file structure changed to define in a single entry the internal sampling frequency (after the signal conditioner). NOTICE that this change affects the all the adapters (acquisition, tracking, telemetry_decoder, observables, and PVT). All the adapters are now modified to work with this feature.
- Moved several in-line GPS L1 CA parameters (a.k.a magic numbers..) to ./src/core/system_parameters/GPS_L1_CA.h definition file.
- Tracking blocks now uses DOUBLE values in their outputs.
- Observables and PVT now are separated. PVT and their associated libraries are moved to ./src/algorithms/PVT
- Temporarily disabled the RINEX output (I am working on that!)
- GNSS-SDR screen output now gives extended debug information of the receiver status and events. In the future, this output will be redirected to a log file.
- Bug fixes:
- FILE_SIGNAL_SOURCE now works correctly when the user configures GNSS-SDR to process the entire file.
- GPS_L1_CA_DLL_PLL now computes correctly the PRN start values.
- GPS_L1_CA_DLL_FLL_PLL now computes correctly the PRN start values.
- Several modifications in GPS_L1_CA_Telemetry_Decoder, GPS_L1_CA_Observables, and GPS_L1_CA_PVT modules to fix the GPS position computation.
- New features
- Tracking blocks perform a signal integrity check against NaN outliers before the correlation process.
- Tracking and PVT binary dump options are now documented and we provide MATLAB libraries and sample files to read it. Available in ./utils/matlab" and "./utils/matlab/libs"
- Observables output rate can be configured. This option enables the GPS L1 CA PVT computation at a maximum rate of 1ms.
- GPS_L1_CA_PVT now can perform a moving average Latitude, Longitude, and Altitude output for each of the Observables output. It is configurable using the configuration file.
- Added Google Earth compatible Keyhole Markup Language (KML) output writer class (./src/algorithms/PVT/libs/kml_printer.h and ./src/algorithms/PVT/libs/kml_printer.cc ). You can see the receiver position directly using Google Earth.
- We provide a master configuration file which includes an in-line documentation with all the new (and old) options. It can be found in ./conf/master.conf
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@84 64b25241-fba3-4117-9849-534c7e92360d
New tracking libraries:
- tracking_discriminators: Library with a set of code tracking and carrier tracking discriminators that is used by the tracking algorithms. (fully documented, including math algorithms using doxygen!)
- tracking_2rd_DLL_filter: Class that implements 2 order DLL filter for code tracking loop.
- tracking_2rd_PLL_filter: Class that implements 2 order PLL filter for carrier tracking loop.
- tracking_FLL_PLL_filter: Class that implements hybrid FLL and PLL filter for tracking carrier loop.
- CN_estimators: Library with a set of Carrier to Noise estimators and lock detectors. (fully documented, including math algorithms using doxygen!)
Tracking:
- gps_l1_ca_dll_pll_tracking: The existing DLL + PLL tracking module, which is the K.Borre and D.Akos one, is now completely re-factored. Now uses the above described libraries.
- gps_l1_ca_dll_fll_pll_tracking: This is a brand new tracking module, which implements the FLL assisted PLL described in Kaplan (2nd edition). (also documentedwith references)
Configuration options:
- The following tracking parameters are added:
;######### TRACKING CONFIG ############
; Tracking.implementation=GPS_L1_CA_DLL_PLL_Tracking or GPS_L1_CA_DLL_FLL_PLL_Tracking
Tracking.implementation=GPS_L1_CA_DLL_FLL_PLL_Tracking
;PLL filter bandwidth in Hz.
Tracking.pll_bw_hz=50.0;
;DLL filter bandwidth in Hz.
Tracking.dll_bw_hz=2.0;
;FLL filter bandwidth in Hz.
Tracking.fll_bw_hz=50;
;filter order: choice between 2 or 3 at this moment, only for FLL assisted PLL
Tracking.order=2;
;Correlator space in chips units
Tracking.early_late_space_chips=0.5;
Other files have also been modified with minor changes to adapt to new modules or minor bug fixes.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@80 64b25241-fba3-4117-9849-534c7e92360d
