mirror of
https://github.com/gnss-sdr/gnss-sdr
synced 2024-12-13 11:40:33 +00:00
Small bug fix and new configuration file ready to receive GPS signals in real-time with USRP devices and appropiate front-ends. Remember to tune the front-end gain (source section in config file) and, in some particular antenna and LNA setups, tune also the acquisition threshold (acquisition section). The configuration is tested on USRP v1 + DBSRX, USRP 2 + DBSRX and USRP B100 + WBX.
git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@491 64b25241-fba3-4117-9849-534c7e92360d
This commit is contained in:
Javier Arribas
parent
a20c1559cf
commit
885c5f364c
381
conf/gnss-sdr_GPS_USRP_realtime.conf
Normal file
381
conf/gnss-sdr_GPS_USRP_realtime.conf
Normal file
@ -0,0 +1,381 @@
|
||||
; Default configuration file
|
||||
; You can define your own receiver and invoke it by doing
|
||||
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
|
||||
;
|
||||
|
||||
[GNSS-SDR]
|
||||
|
||||
;######### GLOBAL OPTIONS ##################
|
||||
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
||||
GNSS-SDR.internal_fs_hz=2000000
|
||||
|
||||
;######### CONTROL_THREAD CONFIG ############
|
||||
ControlThread.wait_for_flowgraph=false
|
||||
|
||||
;######### SUPL RRLP GPS assistance configuration #####
|
||||
GNSS-SDR.SUPL_gps_enabled=false
|
||||
GNSS-SDR.SUPL_read_gps_assistance_xml=true
|
||||
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
|
||||
GNSS-SDR.SUPL_gps_ephemeris_port=7275
|
||||
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
|
||||
GNSS-SDR.SUPL_gps_acquisition_port=7275
|
||||
GNSS-SDR.SUPL_MCC=244
|
||||
GNSS-SDR.SUPL_MNS=5
|
||||
GNSS-SDR.SUPL_LAC=0x59e2
|
||||
GNSS-SDR.SUPL_CI=0x31b0
|
||||
|
||||
;######### SIGNAL_SOURCE CONFIG ############
|
||||
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
|
||||
SignalSource.implementation=UHD_Signal_Source
|
||||
|
||||
;#filename: path to file with the captured GNSS signal samples to be processed
|
||||
SignalSource.filename=/media/DATALOGGER/Agilent GPS Generator/cap2/agilent_cap2.dat
|
||||
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
SignalSource.item_type=gr_complex
|
||||
|
||||
;#sampling_frequency: Original Signal sampling frequency in [Hz]
|
||||
SignalSource.sampling_frequency=2000000
|
||||
|
||||
;#freq: RF front-end center frequency in [Hz]
|
||||
SignalSource.freq=1575420000
|
||||
|
||||
;#gain: Front-end Gain in [dB]
|
||||
SignalSource.gain=60
|
||||
|
||||
;#subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0)
|
||||
SignalSource.subdevice=A:0
|
||||
|
||||
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
|
||||
SignalSource.samples=0
|
||||
|
||||
;#repeat: Repeat the processing file. Disable this option in this version
|
||||
SignalSource.repeat=false
|
||||
|
||||
;#dump: Dump the Signal source data to a file. Disable this option in this version
|
||||
SignalSource.dump=false
|
||||
|
||||
SignalSource.dump_filename=../data/signal_source.dat
|
||||
|
||||
|
||||
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
|
||||
; it helps to not overload the CPU, but the processing time will be longer.
|
||||
SignalSource.enable_throttle_control=false
|
||||
|
||||
|
||||
;######### SIGNAL_CONDITIONER CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Signal_Conditioner]
|
||||
;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks
|
||||
;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks
|
||||
;SignalConditioner.implementation=Signal_Conditioner
|
||||
SignalConditioner.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER CONFIG ############
|
||||
;## Changes the type of input data. Please disable it in this version.
|
||||
;#implementation: [Pass_Through] disables this block
|
||||
DataTypeAdapter.implementation=Pass_Through
|
||||
|
||||
;######### INPUT_FILTER CONFIG ############
|
||||
;## Filter the input data. Can be combined with frequency translation for IF signals
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Fir_Filter] enables a FIR Filter
|
||||
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
|
||||
|
||||
;InputFilter.implementation=Fir_Filter
|
||||
;InputFilter.implementation=Freq_Xlating_Fir_Filter
|
||||
InputFilter.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges, the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter.output_item_type=gr_complex
|
||||
|
||||
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
||||
InputFilter.taps_item_type=float
|
||||
|
||||
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
||||
InputFilter.number_of_taps=5
|
||||
|
||||
;#number_of _bands: Number of frequency bands in the filter.
|
||||
InputFilter.number_of_bands=2
|
||||
|
||||
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
||||
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
||||
;#The number of band_begin and band_end elements must match the number of bands
|
||||
|
||||
InputFilter.band1_begin=0.0
|
||||
InputFilter.band1_end=0.45
|
||||
InputFilter.band2_begin=0.55
|
||||
InputFilter.band2_end=1.0
|
||||
|
||||
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
||||
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
||||
|
||||
InputFilter.ampl1_begin=1.0
|
||||
InputFilter.ampl1_end=1.0
|
||||
InputFilter.ampl2_begin=0.0
|
||||
InputFilter.ampl2_end=0.0
|
||||
|
||||
;#band_error: weighting applied to each band (usually 1).
|
||||
;#The number of band_error elements must match the number of bands
|
||||
InputFilter.band1_error=1.0
|
||||
InputFilter.band2_error=1.0
|
||||
|
||||
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
||||
InputFilter.filter_type=bandpass
|
||||
|
||||
;#grid_density: determines how accurately the filter will be constructed.
|
||||
;The minimum value is 16; higher values are slower to compute the filter.
|
||||
InputFilter.grid_density=16
|
||||
|
||||
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
|
||||
;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz
|
||||
|
||||
InputFilter.sampling_frequency=2000000
|
||||
InputFilter.IF=0
|
||||
|
||||
|
||||
|
||||
;######### RESAMPLER CONFIG ############
|
||||
;## Resamples the input data.
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Direct_Resampler]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation
|
||||
;Resampler.implementation=Direct_Resampler
|
||||
Resampler.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the resamplered data to a file.
|
||||
Resampler.dump=false
|
||||
;#dump_filename: Log path and filename.
|
||||
Resampler.dump_filename=../data/resampler.dat
|
||||
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Resampler.item_type=gr_complex
|
||||
|
||||
;#sample_freq_in: the sample frequency of the input signal
|
||||
Resampler.sample_freq_in=8000000
|
||||
|
||||
;#sample_freq_out: the desired sample frequency of the output signal
|
||||
Resampler.sample_freq_out=2000000
|
||||
|
||||
|
||||
;######### CHANNELS GLOBAL CONFIG ############
|
||||
;#count: Number of available satellite channels.
|
||||
Channels.count=6
|
||||
;#in_acquisition: Number of channels simultaneously acquiring
|
||||
Channels.in_acquisition=1
|
||||
;#system: GPS, GLONASS, Galileo, SBAS or Compass
|
||||
;#if the option is disabled by default is assigned GPS
|
||||
Channel.system=GPS
|
||||
|
||||
;#signal:
|
||||
;# "1C" GPS L1 C/A
|
||||
;# "1P" GPS L1 P
|
||||
;# "1W" GPS L1 Z-tracking and similar (AS on)
|
||||
;# "1Y" GPS L1 Y
|
||||
;# "1M" GPS L1 M
|
||||
;# "1N" GPS L1 codeless
|
||||
;# "2C" GPS L2 C/A
|
||||
;# "2D" GPS L2 L1(C/A)+(P2-P1) semi-codeless
|
||||
;# "2S" GPS L2 L2C (M)
|
||||
;# "2L" GPS L2 L2C (L)
|
||||
;# "2X" GPS L2 L2C (M+L)
|
||||
;# "2P" GPS L2 P
|
||||
;# "2W" GPS L2 Z-tracking and similar (AS on)
|
||||
;# "2Y" GPS L2 Y
|
||||
;# "2M" GPS GPS L2 M
|
||||
;# "2N" GPS L2 codeless
|
||||
;# "5I" GPS L5 I
|
||||
;# "5Q" GPS L5 Q
|
||||
;# "5X" GPS L5 I+Q
|
||||
;# "1C" GLONASS G1 C/A
|
||||
;# "1P" GLONASS G1 P
|
||||
;# "2C" GLONASS G2 C/A (Glonass M)
|
||||
;# "2P" GLONASS G2 P
|
||||
;# "1A" GALILEO E1 A (PRS)
|
||||
;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL)
|
||||
;# "1C" GALILEO E1 C (no data)
|
||||
;# "1X" GALILEO E1 B+C
|
||||
;# "1Z" GALILEO E1 A+B+C
|
||||
;# "5I" GALILEO E5a I (F/NAV OS)
|
||||
;# "5Q" GALILEO E5a Q (no data)
|
||||
;# "5X" GALILEO E5a I+Q
|
||||
;# "7I" GALILEO E5b I
|
||||
;# "7Q" GALILEO E5b Q
|
||||
;# "7X" GALILEO E5b I+Q
|
||||
;# "8I" GALILEO E5 I
|
||||
;# "8Q" GALILEO E5 Q
|
||||
;# "8X" GALILEO E5 I+Q
|
||||
;# "6A" GALILEO E6 A
|
||||
;# "6B" GALILEO E6 B
|
||||
;# "6C" GALILEO E6 C
|
||||
;# "6X" GALILEO E6 B+C
|
||||
;# "6Z" GALILEO E6 A+B+C
|
||||
;# "1C" SBAS L1 C/A
|
||||
;# "5I" SBAS L5 I
|
||||
;# "5Q" SBAS L5 Q
|
||||
;# "5X" SBAS L5 I+Q
|
||||
;# "2I" COMPASS E2 I
|
||||
;# "2Q" COMPASS E2 Q
|
||||
;# "2X" COMPASS E2 IQ
|
||||
;# "7I" COMPASS E5b I
|
||||
;# "7Q" COMPASS E5b Q
|
||||
;# "7X" COMPASS E5b IQ
|
||||
;# "6I" COMPASS E6 I
|
||||
;# "6Q" COMPASS E6 Q
|
||||
;# "6X" COMPASS E6 IQ
|
||||
;#if the option is disabled by default is assigned "1C" GPS L1 C/A
|
||||
Channel.signal=1C
|
||||
|
||||
;######### SPECIFIC CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
;######### CHANNEL 0 CONFIG ############
|
||||
|
||||
Channel0.system=GPS
|
||||
Channel0.signal=1C
|
||||
|
||||
;#satellite: Satellite PRN ID for this channel. Disable this option to random search
|
||||
Channel0.satellite=11
|
||||
|
||||
;######### CHANNEL 1 CONFIG ############
|
||||
|
||||
Channel1.system=GPS
|
||||
Channel1.signal=1C
|
||||
Channel1.satellite=18
|
||||
|
||||
|
||||
;######### ACQUISITION GLOBAL CONFIG ############
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition.dump=false
|
||||
;#filename: Log path and filename
|
||||
Acquisition.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
Acquisition.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition.threshold=0.01
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition.doppler_max=10000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition.doppler_step=500
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] (should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition.max_dwells=1
|
||||
|
||||
;######### ACQUISITION CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### TRACKING GLOBAL CONFIG ############
|
||||
|
||||
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
|
||||
Tracking.implementation=GPS_L1_CA_DLL_PLL_Optim_Tracking
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
|
||||
Tracking.item_type=gr_complex
|
||||
|
||||
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
|
||||
Tracking.if=0
|
||||
|
||||
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
|
||||
Tracking.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
|
||||
Tracking.dump_filename=./tracking_ch_
|
||||
|
||||
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
||||
Tracking.pll_bw_hz=50.0;
|
||||
|
||||
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
||||
Tracking.dll_bw_hz=2.0;
|
||||
|
||||
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
||||
Tracking.fll_bw_hz=10.0;
|
||||
|
||||
;#order: PLL/DLL loop filter order [2] or [3]
|
||||
Tracking.order=3;
|
||||
|
||||
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
|
||||
Tracking.early_late_space_chips=0.5;
|
||||
|
||||
;######### TELEMETRY DECODER CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A.
|
||||
TelemetryDecoder.implementation=GPS_L1_CA_Telemetry_Decoder
|
||||
TelemetryDecoder.dump=false
|
||||
|
||||
;######### OBSERVABLES CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
|
||||
Observables.implementation=GPS_L1_CA_Observables
|
||||
|
||||
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
|
||||
Observables.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
Observables.dump_filename=./observables.dat
|
||||
|
||||
|
||||
;######### PVT CONFIG ############
|
||||
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
||||
PVT.implementation=GPS_L1_CA_PVT
|
||||
|
||||
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
||||
PVT.averaging_depth=10
|
||||
|
||||
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
||||
PVT.flag_averaging=true
|
||||
|
||||
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
|
||||
PVT.output_rate_ms=100
|
||||
|
||||
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
|
||||
PVT.display_rate_ms=500
|
||||
|
||||
;# RINEX, KML, and NMEA output configuration
|
||||
|
||||
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
|
||||
PVT.dump_filename=./PVT
|
||||
|
||||
;#nmea_dump_filename: NMEA log path and filename
|
||||
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
|
||||
|
||||
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
|
||||
PVT.flag_nmea_tty_port=false;
|
||||
|
||||
;#nmea_dump_devname: serial device descriptor for NMEA logging
|
||||
PVT.nmea_dump_devname=/dev/pts/4
|
||||
|
||||
|
||||
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
|
||||
PVT.dump=false
|
||||
|
||||
;######### OUTPUT_FILTER CONFIG ############
|
||||
;# Receiver output filter: Leave this block disabled in this version
|
||||
OutputFilter.implementation=Null_Sink_Output_Filter
|
||||
OutputFilter.filename=data/gnss-sdr.dat
|
||||
OutputFilter.item_type=gr_complex
|
||||
@ -31,6 +31,7 @@
|
||||
#include "gn3s_signal_source.h"
|
||||
#include <gnuradio/blocks/file_sink.h>
|
||||
#include <gnuradio/msg_queue.h>
|
||||
#include <gflags/gflags.h>
|
||||
#include <glog/logging.h>
|
||||
#include <gn3s/gn3s_source_cc.h>
|
||||
#include "configuration_interface.h"
|
||||
@ -112,7 +113,7 @@ void Gn3sSignalSource::disconnect(gr::top_block_sptr top_block)
|
||||
|
||||
gr::basic_block_sptr Gn3sSignalSource::get_left_block()
|
||||
{
|
||||
LOG_AT_LEVEL(WARNING) << "Left block of a signal source should not be retrieved";
|
||||
LOG(WARNING) << "Left block of a signal source should not be retrieved";
|
||||
return gr::block_sptr();
|
||||
}
|
||||
|
||||
|
||||
@ -174,6 +174,11 @@ galileo_e1_dll_pll_veml_tracking_cc::galileo_e1_dll_pll_veml_tracking_cc(
|
||||
d_carrier_lock_threshold = CARRIER_LOCK_THRESHOLD;
|
||||
|
||||
systemName["E"] = std::string("Galileo");
|
||||
*d_Very_Early=gr_complex(0,0);
|
||||
*d_Early=gr_complex(0,0);
|
||||
*d_Prompt=gr_complex(0,0);
|
||||
*d_Late=gr_complex(0,0);
|
||||
*d_Very_Late=gr_complex(0,0);
|
||||
}
|
||||
|
||||
void galileo_e1_dll_pll_veml_tracking_cc::start_tracking()
|
||||
@ -471,14 +476,31 @@ int galileo_e1_dll_pll_veml_tracking_cc::general_work (int noutput_items,gr_vect
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
Gnss_Synchro **out = (Gnss_Synchro **) &output_items[0]; //block output stream pointer
|
||||
// GNSS_SYNCHRO OBJECT to interchange data between tracking->telemetry_decoder
|
||||
*out[0] = *d_acquisition_gnss_synchro;
|
||||
}
|
||||
{
|
||||
// ########## DEBUG OUTPUT (TIME ONLY for channel 0 when tracking is disabled)
|
||||
/*!
|
||||
* \todo The stop timer has to be moved to the signal source!
|
||||
*/
|
||||
// stream to collect cout calls to improve thread safety
|
||||
std::stringstream tmp_str_stream;
|
||||
if (floor(d_sample_counter / d_fs_in) != d_last_seg)
|
||||
{
|
||||
d_last_seg = floor(d_sample_counter / d_fs_in);
|
||||
|
||||
if (d_channel == 0)
|
||||
{
|
||||
// debug: Second counter in channel 0
|
||||
tmp_str_stream << "Current input signal time = " << d_last_seg << " [s]" << std::endl << std::flush;
|
||||
std::cout << tmp_str_stream.rdbuf() << std::flush;
|
||||
}
|
||||
}
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
Gnss_Synchro **out = (Gnss_Synchro **) &output_items[0]; //block output stream pointer
|
||||
// GNSS_SYNCHRO OBJECT to interchange data between tracking->telemetry_decoder
|
||||
*out[0] = *d_acquisition_gnss_synchro;
|
||||
}
|
||||
|
||||
if(d_dump)
|
||||
{
|
||||
|
||||
@ -489,6 +489,23 @@ int Galileo_E1_Tcp_Connector_Tracking_cc::general_work (int noutput_items, gr_ve
|
||||
}
|
||||
else
|
||||
{
|
||||
// ########## DEBUG OUTPUT (TIME ONLY for channel 0 when tracking is disabled)
|
||||
/*!
|
||||
* \todo The stop timer has to be moved to the signal source!
|
||||
*/
|
||||
// stream to collect cout calls to improve thread safety
|
||||
std::stringstream tmp_str_stream;
|
||||
if (floor(d_sample_counter / d_fs_in) != d_last_seg)
|
||||
{
|
||||
d_last_seg = floor(d_sample_counter / d_fs_in);
|
||||
|
||||
if (d_channel == 0)
|
||||
{
|
||||
// debug: Second counter in channel 0
|
||||
tmp_str_stream << "Current input signal time = " << d_last_seg << " [s]" << std::endl << std::flush;
|
||||
std::cout << tmp_str_stream.rdbuf() << std::flush;
|
||||
}
|
||||
}
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
|
||||
@ -540,6 +540,23 @@ int Gps_L1_Ca_Dll_Fll_Pll_Tracking_cc::general_work (int noutput_items, gr_vecto
|
||||
}
|
||||
else
|
||||
{
|
||||
// ########## DEBUG OUTPUT (TIME ONLY for channel 0 when tracking is disabled)
|
||||
/*!
|
||||
* \todo The stop timer has to be moved to the signal source!
|
||||
*/
|
||||
// stream to collect cout calls to improve thread safety
|
||||
std::stringstream tmp_str_stream;
|
||||
if (floor(d_sample_counter / d_fs_in) != d_last_seg)
|
||||
{
|
||||
d_last_seg = floor(d_sample_counter / d_fs_in);
|
||||
|
||||
if (d_channel == 0)
|
||||
{
|
||||
// debug: Second counter in channel 0
|
||||
tmp_str_stream << "Current input signal time = " << d_last_seg << " [s]" << std::endl << std::flush;
|
||||
std::cout << tmp_str_stream.rdbuf() << std::flush;
|
||||
}
|
||||
}
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
|
||||
@ -499,6 +499,24 @@ int Gps_L1_Ca_Dll_Pll_Optim_Tracking_cc::general_work (int noutput_items, gr_vec
|
||||
}
|
||||
else
|
||||
{
|
||||
|
||||
// ########## DEBUG OUTPUT (TIME ONLY for channel 0 when tracking is disabled)
|
||||
/*!
|
||||
* \todo The stop timer has to be moved to the signal source!
|
||||
*/
|
||||
// stream to collect cout calls to improve thread safety
|
||||
std::stringstream tmp_str_stream;
|
||||
if (floor(d_sample_counter / d_fs_in) != d_last_seg)
|
||||
{
|
||||
d_last_seg = floor(d_sample_counter / d_fs_in);
|
||||
|
||||
if (d_channel == 0)
|
||||
{
|
||||
// debug: Second counter in channel 0
|
||||
tmp_str_stream << "Current input signal time = " << d_last_seg << " [s]" << std::endl << std::flush;
|
||||
std::cout << tmp_str_stream.rdbuf() << std::flush;
|
||||
}
|
||||
}
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
|
||||
@ -515,6 +515,23 @@ int Gps_L1_Ca_Dll_Pll_Tracking_cc::general_work (int noutput_items, gr_vector_in
|
||||
}
|
||||
else
|
||||
{
|
||||
// ########## DEBUG OUTPUT (TIME ONLY for channel 0 when tracking is disabled)
|
||||
/*!
|
||||
* \todo The stop timer has to be moved to the signal source!
|
||||
*/
|
||||
// stream to collect cout calls to improve thread safety
|
||||
std::stringstream tmp_str_stream;
|
||||
if (floor(d_sample_counter / d_fs_in) != d_last_seg)
|
||||
{
|
||||
d_last_seg = floor(d_sample_counter / d_fs_in);
|
||||
|
||||
if (d_channel == 0)
|
||||
{
|
||||
// debug: Second counter in channel 0
|
||||
tmp_str_stream << "Current input signal time = " << d_last_seg << " [s]" << std::endl << std::flush;
|
||||
std::cout << tmp_str_stream.rdbuf() << std::flush;
|
||||
}
|
||||
}
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
|
||||
@ -558,6 +558,23 @@ int Gps_L1_Ca_Tcp_Connector_Tracking_cc::general_work (int noutput_items, gr_vec
|
||||
}
|
||||
else
|
||||
{
|
||||
// ########## DEBUG OUTPUT (TIME ONLY for channel 0 when tracking is disabled)
|
||||
/*!
|
||||
* \todo The stop timer has to be moved to the signal source!
|
||||
*/
|
||||
// stream to collect cout calls to improve thread safety
|
||||
std::stringstream tmp_str_stream;
|
||||
if (floor(d_sample_counter / d_fs_in) != d_last_seg)
|
||||
{
|
||||
d_last_seg = floor(d_sample_counter / d_fs_in);
|
||||
|
||||
if (d_channel == 0)
|
||||
{
|
||||
// debug: Second counter in channel 0
|
||||
tmp_str_stream << "Current input signal time = " << d_last_seg << " [s]" << std::endl << std::flush;
|
||||
std::cout << tmp_str_stream.rdbuf() << std::flush;
|
||||
}
|
||||
}
|
||||
*d_Early = gr_complex(0,0);
|
||||
*d_Prompt = gr_complex(0,0);
|
||||
*d_Late = gr_complex(0,0);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user