mirror of
https://github.com/gnss-sdr/gnss-sdr
synced 2024-12-12 19:20:32 +00:00
Added L2C_M simple PCPS acquisition adapter and its associated unit test
This commit is contained in:
Javier
parent
12b5d798a7
commit
6618c220d0
@ -75,10 +75,10 @@ DataTypeAdapter0.item_type=gr_complex
|
||||
InputFilter0.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter0.dump=false
|
||||
InputFilter0.dump=true
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter0.dump_filename=../data/input_filter.dat
|
||||
InputFilter0.dump_filename=../data/input_filter_ch0.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
@ -167,10 +167,10 @@ DataTypeAdapter1.item_type=gr_complex
|
||||
InputFilter1.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter1.dump=false
|
||||
InputFilter1.dump=true
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter1.dump_filename=../data/input_filter.dat
|
||||
InputFilter1.dump_filename=../data/input_filter_ch1.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
@ -227,7 +227,7 @@ InputFilter1.grid_density=16
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter1.sampling_frequency=20000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
InputFilter1.IF=100000
|
||||
InputFilter1.IF=-100000
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter1.decimation_factor=4
|
||||
@ -270,7 +270,7 @@ Channels_GPS.count=2
|
||||
;#count: Number of available Galileo satellite channels.
|
||||
Channels_Galileo.count=0
|
||||
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
|
||||
Channels.in_acquisition=2
|
||||
Channels.in_acquisition=1
|
||||
;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
|
||||
;#if the option is disabled by default is assigned GPS
|
||||
Channel.system=GPS, GPS L2C M
|
||||
@ -311,11 +311,11 @@ Acquisition_GPS0.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel:
|
||||
Acquisition_GPS0.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS0.threshold=0.006
|
||||
Acquisition_GPS0.threshold=0.002
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS0.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS0.doppler_max=10000
|
||||
Acquisition_GPS0.doppler_max=5000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS0.doppler_step=250
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
@ -338,13 +338,13 @@ Acquisition_GPS1.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel:
|
||||
Acquisition_GPS1.implementation=GPS_L2_M_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS1.threshold=0.012
|
||||
Acquisition_GPS1.threshold=0.0005
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS1.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS1.doppler_max=10000
|
||||
Acquisition_GPS1.doppler_max=5000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS1.doppler_step=250
|
||||
Acquisition_GPS1.doppler_step=100
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
@ -368,13 +368,13 @@ Acquisition_GPS.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel:
|
||||
Acquisition_GPS.implementation=GPS_L2_M_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS.threshold=0.012
|
||||
Acquisition_GPS.threshold=0.001
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS.doppler_max=10000
|
||||
Acquisition_GPS.doppler_max=5000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS.doppler_step=250
|
||||
Acquisition_GPS.doppler_step=100
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
|
||||
@ -0,0 +1,478 @@
|
||||
; Default configuration file
|
||||
; You can define your own receiver and invoke it by doing
|
||||
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
|
||||
;
|
||||
|
||||
[GNSS-SDR]
|
||||
|
||||
;######### GLOBAL OPTIONS ##################
|
||||
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
||||
GNSS-SDR.internal_fs_hz=5000000
|
||||
|
||||
;######### CONTROL_THREAD CONFIG ############
|
||||
ControlThread.wait_for_flowgraph=false
|
||||
|
||||
;######### SUPL RRLP GPS assistance configuration #####
|
||||
GNSS-SDR.SUPL_gps_enabled=false
|
||||
GNSS-SDR.SUPL_read_gps_assistance_xml=true
|
||||
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
|
||||
GNSS-SDR.SUPL_gps_ephemeris_port=7275
|
||||
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
|
||||
GNSS-SDR.SUPL_gps_acquisition_port=7275
|
||||
GNSS-SDR.SUPL_MCC=244
|
||||
GNSS-SDR.SUPL_MNS=5
|
||||
GNSS-SDR.SUPL_LAC=0x59e2
|
||||
GNSS-SDR.SUPL_CI=0x31b0
|
||||
|
||||
;######### SIGNAL_SOURCE CONFIG ############
|
||||
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
|
||||
SignalSource.implementation=Flexiband_Signal_Source
|
||||
|
||||
SignalSource.flag_read_file=true
|
||||
SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb
|
||||
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
SignalSource.item_type=gr_complex
|
||||
|
||||
;# FPGA firmware file
|
||||
SignalSource.firmware_file=flexiband_III-1b.bit
|
||||
|
||||
;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file
|
||||
SignalSource.RF_channels=2
|
||||
|
||||
;#frontend channels gain. Not usable yet!
|
||||
SignalSource.gain1=0
|
||||
SignalSource.gain2=0
|
||||
SignalSource.gain3=0
|
||||
|
||||
;#frontend channels AGC
|
||||
SignalSource.AGC=true
|
||||
|
||||
;# USB 3.0 packet buffer size (number of SuperSpeed packets)
|
||||
SignalSource.usb_packet_buffer=128
|
||||
|
||||
;######################################################
|
||||
;######### RF CHANNEL 0 SIGNAL CONDITIONER ############
|
||||
;######################################################
|
||||
|
||||
;######### SIGNAL_CONDITIONER 0 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner0.implementation=Signal_Conditioner
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 0 CONFIG ############
|
||||
DataTypeAdapter0.implementation=Pass_Through
|
||||
DataTypeAdapter0.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 0 CONFIG ############
|
||||
;## Filter the input data. Can be combined with frequency translation for IF signals
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Fir_Filter] enables a FIR Filter
|
||||
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
|
||||
|
||||
InputFilter0.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter0.dump=true
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter0.dump_filename=../data/input_filter_ch0.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
|
||||
;#the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.output_item_type=gr_complex
|
||||
|
||||
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
||||
InputFilter0.taps_item_type=float
|
||||
|
||||
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
||||
InputFilter0.number_of_taps=5
|
||||
|
||||
;#number_of _bands: Number of frequency bands in the filter.
|
||||
InputFilter0.number_of_bands=2
|
||||
|
||||
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
||||
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
||||
;#The number of band_begin and band_end elements must match the number of bands
|
||||
|
||||
InputFilter0.band1_begin=0.0
|
||||
InputFilter0.band1_end=0.45
|
||||
InputFilter0.band2_begin=0.55
|
||||
InputFilter0.band2_end=1.0
|
||||
|
||||
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
||||
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
||||
|
||||
InputFilter0.ampl1_begin=1.0
|
||||
InputFilter0.ampl1_end=1.0
|
||||
InputFilter0.ampl2_begin=0.0
|
||||
InputFilter0.ampl2_end=0.0
|
||||
|
||||
;#band_error: weighting applied to each band (usually 1).
|
||||
;#The number of band_error elements must match the number of bands
|
||||
InputFilter0.band1_error=1.0
|
||||
InputFilter0.band2_error=1.0
|
||||
|
||||
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
||||
InputFilter0.filter_type=bandpass
|
||||
|
||||
;#grid_density: determines how accurately the filter will be constructed.
|
||||
;The minimum value is 16; higher values are slower to compute the filter.
|
||||
InputFilter0.grid_density=16
|
||||
|
||||
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
|
||||
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
|
||||
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter0.sampling_frequency=20000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
;# WARNING: Fraunhofer front-end hardwareconfigurations can difer. Signals available on http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html are centered on 0 Hz, ALL BANDS.
|
||||
:#InputFilter0.IF=-205000
|
||||
InputFilter0.IF=0
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter0.decimation_factor=4
|
||||
|
||||
;######### RESAMPLER CONFIG 0 ############
|
||||
;## Resamples the input data.
|
||||
Resampler0.implementation=Pass_Through
|
||||
|
||||
;######################################################
|
||||
;######### RF CHANNEL 1 SIGNAL CONDITIONER ############
|
||||
;######################################################
|
||||
|
||||
;######### SIGNAL_CONDITIONER 1 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner1.implementation=Signal_Conditioner
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 1 CONFIG ############
|
||||
DataTypeAdapter1.implementation=Pass_Through
|
||||
DataTypeAdapter1.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 0 CONFIG ############
|
||||
;## Filter the input data. Can be combined with frequency translation for IF signals
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Fir_Filter] enables a FIR Filter
|
||||
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
|
||||
|
||||
InputFilter1.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter1.dump=true
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter1.dump_filename=../data/input_filter_ch1.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
|
||||
;#the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.output_item_type=gr_complex
|
||||
|
||||
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
||||
InputFilter1.taps_item_type=float
|
||||
|
||||
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
||||
InputFilter1.number_of_taps=5
|
||||
|
||||
;#number_of _bands: Number of frequency bands in the filter.
|
||||
InputFilter1.number_of_bands=2
|
||||
|
||||
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
||||
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
||||
;#The number of band_begin and band_end elements must match the number of bands
|
||||
|
||||
InputFilter1.band1_begin=0.0
|
||||
InputFilter1.band1_end=0.45
|
||||
InputFilter1.band2_begin=0.55
|
||||
InputFilter1.band2_end=1.0
|
||||
|
||||
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
||||
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
||||
|
||||
InputFilter1.ampl1_begin=1.0
|
||||
InputFilter1.ampl1_end=1.0
|
||||
InputFilter1.ampl2_begin=0.0
|
||||
InputFilter1.ampl2_end=0.0
|
||||
|
||||
;#band_error: weighting applied to each band (usually 1).
|
||||
;#The number of band_error elements must match the number of bands
|
||||
InputFilter1.band1_error=1.0
|
||||
InputFilter1.band2_error=1.0
|
||||
|
||||
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
||||
InputFilter1.filter_type=bandpass
|
||||
|
||||
;#grid_density: determines how accurately the filter will be constructed.
|
||||
;The minimum value is 16; higher values are slower to compute the filter.
|
||||
InputFilter1.grid_density=16
|
||||
|
||||
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
|
||||
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
|
||||
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter1.sampling_frequency=20000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
InputFilter1.IF=0
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter1.decimation_factor=4
|
||||
|
||||
|
||||
;######### RESAMPLER CONFIG 1 ############
|
||||
;## Resamples the input data.
|
||||
Resampler1.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 2 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner2.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 2 CONFIG ############
|
||||
DataTypeAdapter2.implementation=Pass_Through
|
||||
DataTypeAdapter2.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 2 CONFIG ############
|
||||
InputFilter2.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter2.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter2.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 2 ############
|
||||
;## Resamples the input data.
|
||||
Resampler2.implementation=Pass_Through
|
||||
|
||||
;######### CHANNELS GLOBAL CONFIG ############
|
||||
;#count: Number of available GPS satellite channels.
|
||||
Channels_GPS.count=2
|
||||
;#count: Number of available Galileo satellite channels.
|
||||
Channels_Galileo.count=0
|
||||
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
|
||||
Channels.in_acquisition=1
|
||||
;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
|
||||
;#if the option is disabled by default is assigned GPS
|
||||
Channel.system=GPS, GPS L2C M
|
||||
|
||||
;# CHANNEL CONNECTION
|
||||
Channel0.RF_channel_ID=0
|
||||
Channel0.system=GPS
|
||||
Channel0.signal=1C
|
||||
|
||||
Channel1.RF_channel_ID=1
|
||||
Channel1.system=GPS L2C M
|
||||
Channel1.signal=2S
|
||||
|
||||
Channel2.RF_channel_ID=0
|
||||
Channel3.RF_channel_ID=0
|
||||
Channel4.RF_channel_ID=0
|
||||
Channel5.RF_channel_ID=0
|
||||
Channel6.RF_channel_ID=0
|
||||
Channel7.RF_channel_ID=0
|
||||
|
||||
;#signal:
|
||||
;#if the option is disabled by default is assigned "1C" GPS L1 C/A
|
||||
Channel.signal=1C
|
||||
|
||||
;######### SPECIFIC CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition_GPS0.dump=false
|
||||
;#filename: Log path and filename
|
||||
Acquisition_GPS0.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition_GPS0.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition_GPS0.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition_GPS0.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel:
|
||||
Acquisition_GPS0.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS0.threshold=0.005
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS0.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS0.doppler_max=5000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS0.doppler_step=250
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition_GPS0.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition_GPS0.max_dwells=1
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition_GPS1.dump=false
|
||||
;#filename: Log path and filename
|
||||
Acquisition_GPS1.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition_GPS1.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition_GPS1.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition_GPS1.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel:
|
||||
Acquisition_GPS1.implementation=GPS_L2_M_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS1.threshold=0.001
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS1.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS1.doppler_max=5000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS1.doppler_step=100
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition_GPS1.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition_GPS1.max_dwells=1
|
||||
|
||||
|
||||
;######### ACQUISITION GLOBAL CONFIG ############
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition_GPS.dump=true
|
||||
;#filename: Log path and filename
|
||||
Acquisition_GPS.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition_GPS.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition_GPS.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition_GPS.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel:
|
||||
Acquisition_GPS.implementation=GPS_L2_M_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS.threshold=0.001
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS.doppler_max=5000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS.doppler_step=100
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition_GPS.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition_GPS.max_dwells=1
|
||||
|
||||
|
||||
;######### ACQUISITION CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### TRACKING GLOBAL CONFIG ############
|
||||
|
||||
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
|
||||
Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
|
||||
Tracking_GPS.item_type=gr_complex
|
||||
|
||||
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
|
||||
Tracking_GPS.if=0
|
||||
|
||||
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
|
||||
Tracking_GPS.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
|
||||
Tracking_GPS.dump_filename=./tracking_ch_
|
||||
|
||||
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.pll_bw_hz=40.0;
|
||||
|
||||
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.dll_bw_hz=3.0;
|
||||
|
||||
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.fll_bw_hz=10.0;
|
||||
|
||||
;#order: PLL/DLL loop filter order [2] or [3]
|
||||
Tracking_GPS.order=3;
|
||||
|
||||
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
|
||||
Tracking_GPS.early_late_space_chips=0.5;
|
||||
|
||||
;######### TELEMETRY DECODER GPS CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
|
||||
TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
|
||||
TelemetryDecoder_GPS.dump=false
|
||||
;#decimation factor
|
||||
TelemetryDecoder_GPS.decimation_factor=1;
|
||||
|
||||
;######### OBSERVABLES CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
|
||||
Observables.implementation=GPS_L1_CA_Observables
|
||||
|
||||
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
|
||||
Observables.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
Observables.dump_filename=./observables.dat
|
||||
|
||||
|
||||
;######### PVT CONFIG ############
|
||||
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
||||
PVT.implementation=GPS_L1_CA_PVT
|
||||
|
||||
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
||||
PVT.averaging_depth=10
|
||||
|
||||
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
||||
PVT.flag_averaging=true
|
||||
|
||||
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
|
||||
PVT.output_rate_ms=100
|
||||
|
||||
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
|
||||
PVT.display_rate_ms=500
|
||||
|
||||
;# RINEX, KML, and NMEA output configuration
|
||||
|
||||
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
|
||||
PVT.dump_filename=./PVT
|
||||
|
||||
;#nmea_dump_filename: NMEA log path and filename
|
||||
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
|
||||
|
||||
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
|
||||
PVT.flag_nmea_tty_port=false;
|
||||
|
||||
;#nmea_dump_devname: serial device descriptor for NMEA logging
|
||||
PVT.nmea_dump_devname=/dev/pts/4
|
||||
|
||||
|
||||
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
|
||||
PVT.dump=false
|
||||
|
||||
;######### OUTPUT_FILTER CONFIG ############
|
||||
;# Receiver output filter: Leave this block disabled in this version
|
||||
OutputFilter.implementation=Null_Sink_Output_Filter
|
||||
OutputFilter.filename=data/gnss-sdr.dat
|
||||
OutputFilter.item_type=gr_complex
|
||||
@ -33,6 +33,7 @@
|
||||
|
||||
#include "gps_l2_m_pcps_acquisition.h"
|
||||
#include <iostream>
|
||||
#include <fstream>
|
||||
#include <stdexcept>
|
||||
#include <boost/math/distributions/exponential.hpp>
|
||||
#include <glog/logging.h>
|
||||
@ -55,7 +56,7 @@ GpsL2MPcpsAcquisition::GpsL2MPcpsAcquisition(
|
||||
std::string default_dump_filename = "./data/acquisition.dat";
|
||||
|
||||
DLOG(INFO) << "role " << role;
|
||||
std::cout<<"GpsL2MPcpsAcquisition role = "<<role<<std::endl;
|
||||
|
||||
item_type_ = configuration_->property(role + ".item_type",
|
||||
default_item_type);
|
||||
//float pfa = configuration_->property(role + ".pfa", 0.0);
|
||||
@ -64,7 +65,6 @@ GpsL2MPcpsAcquisition::GpsL2MPcpsAcquisition(
|
||||
if_ = configuration_->property(role + ".ifreq", 0);
|
||||
dump_ = configuration_->property(role + ".dump", false);
|
||||
shift_resolution_ = configuration_->property(role + ".doppler_max", 15);
|
||||
sampled_ms_ = configuration_->property(role + ".coherent_integration_time_ms", 1);
|
||||
|
||||
bit_transition_flag_ = configuration_->property(role + ".bit_transition_flag", false);
|
||||
|
||||
@ -84,14 +84,14 @@ GpsL2MPcpsAcquisition::GpsL2MPcpsAcquisition(
|
||||
code_length_ = round((double)fs_in_
|
||||
/ (GPS_L2_M_CODE_RATE_HZ / (double)GPS_L2_M_CODE_LENGTH_CHIPS));
|
||||
|
||||
vector_length_ = code_length_ * sampled_ms_;
|
||||
vector_length_ = code_length_;
|
||||
|
||||
code_= new gr_complex[vector_length_];
|
||||
|
||||
// if (item_type_.compare("gr_complex") == 0 )
|
||||
// {
|
||||
item_size_ = sizeof(gr_complex);
|
||||
acquisition_cc_ = pcps_make_acquisition_cc(sampled_ms_, max_dwells_,
|
||||
acquisition_cc_ = pcps_make_acquisition_cc(1, max_dwells_,
|
||||
shift_resolution_, if_, fs_in_, code_length_, code_length_,
|
||||
bit_transition_flag_, queue_, dump_, dump_filename_);
|
||||
|
||||
@ -221,7 +221,7 @@ signed int GpsL2MPcpsAcquisition::mag()
|
||||
void GpsL2MPcpsAcquisition::init()
|
||||
{
|
||||
acquisition_cc_->init();
|
||||
//set_local_code();
|
||||
set_local_code();
|
||||
}
|
||||
|
||||
|
||||
@ -229,18 +229,19 @@ void GpsL2MPcpsAcquisition::set_local_code()
|
||||
{
|
||||
// if (item_type_.compare("gr_complex") == 0)
|
||||
// {
|
||||
std::complex<float>* code = new std::complex<float>[code_length_];
|
||||
gps_l2c_m_code_gen_complex_sampled(code, gnss_synchro_->PRN, fs_in_);
|
||||
|
||||
for (unsigned int i = 0; i < sampled_ms_; i++)
|
||||
{
|
||||
memcpy(&(code_[i*code_length_]), code,
|
||||
sizeof(gr_complex)*code_length_);
|
||||
}
|
||||
|
||||
gps_l2c_m_code_gen_complex_sampled(code_, gnss_synchro_->PRN, fs_in_);
|
||||
acquisition_cc_->set_local_code(code_);
|
||||
|
||||
delete[] code;
|
||||
// //debug
|
||||
// std::ofstream d_dump_file;
|
||||
// std::stringstream filename;
|
||||
// std::streamsize n = 2 * sizeof(float) * (code_length_); // complex file write
|
||||
// filename.str("");
|
||||
// filename << "../data/local_prn_sampled.dat";
|
||||
// d_dump_file.open(filename.str().c_str(), std::ios::out | std::ios::binary);
|
||||
// d_dump_file.write((char*)code_, n);
|
||||
// d_dump_file.close();
|
||||
|
||||
// }
|
||||
}
|
||||
|
||||
|
||||
@ -157,7 +157,6 @@ private:
|
||||
unsigned int doppler_max_;
|
||||
unsigned int doppler_step_;
|
||||
unsigned int shift_resolution_;
|
||||
unsigned int sampled_ms_;
|
||||
unsigned int max_dwells_;
|
||||
long fs_in_;
|
||||
long if_;
|
||||
|
||||
@ -138,14 +138,15 @@ void pcps_acquisition_cc::init()
|
||||
d_mag = 0.0;
|
||||
d_input_power = 0.0;
|
||||
|
||||
d_num_doppler_bins=ceil((static_cast<int>(d_doppler_max)-static_cast<int>(-d_doppler_max))/d_doppler_step);
|
||||
// Count the number of bins
|
||||
d_num_doppler_bins = 0;
|
||||
for (int doppler = static_cast<int>(-d_doppler_max);
|
||||
doppler <= static_cast<int>(d_doppler_max);
|
||||
doppler += d_doppler_step)
|
||||
{
|
||||
d_num_doppler_bins++;
|
||||
}
|
||||
// d_num_doppler_bins = 0;
|
||||
// for (int doppler = static_cast<int>(-d_doppler_max);
|
||||
// doppler <= static_cast<int>(d_doppler_max);
|
||||
// doppler += d_doppler_step)
|
||||
// {
|
||||
// d_num_doppler_bins++;
|
||||
// }
|
||||
|
||||
// Create the carrier Doppler wipeoff signals
|
||||
d_grid_doppler_wipeoffs = new gr_complex*[d_num_doppler_bins];
|
||||
@ -154,7 +155,7 @@ void pcps_acquisition_cc::init()
|
||||
{
|
||||
d_grid_doppler_wipeoffs[doppler_index] = static_cast<gr_complex*>(volk_malloc(d_fft_size * sizeof(gr_complex), volk_get_alignment()));
|
||||
int doppler = -static_cast<int>(d_doppler_max) + d_doppler_step * doppler_index;
|
||||
complex_exp_gen_conj(d_grid_doppler_wipeoffs[doppler_index], d_freq + doppler, d_fs_in, d_fft_size);
|
||||
complex_exp_gen(d_grid_doppler_wipeoffs[doppler_index], d_freq - doppler, d_fs_in, d_fft_size);
|
||||
}
|
||||
}
|
||||
|
||||
@ -247,7 +248,6 @@ int pcps_acquisition_cc::general_work(int noutput_items,
|
||||
volk_32fc_magnitude_squared_32f(d_magnitude, in, d_fft_size);
|
||||
volk_32f_accumulator_s32f(&d_input_power, d_magnitude, d_fft_size);
|
||||
d_input_power /= static_cast<float>(d_fft_size);
|
||||
|
||||
// 2- Doppler frequency search loop
|
||||
for (unsigned int doppler_index=0; doppler_index < d_num_doppler_bins; doppler_index++)
|
||||
{
|
||||
|
||||
@ -47,8 +47,8 @@ void gps_l2c_m_code(int32_t * _dest, unsigned int _prn)
|
||||
x= GPS_L2C_M_INIT_REG[_prn-1];
|
||||
for (int n=0; n<GPS_L2_M_CODE_LENGTH_CHIPS; n++)
|
||||
{
|
||||
x= gps_l2c_m_shift(x);
|
||||
_dest[n]=(int8_t)(x&1);
|
||||
x= gps_l2c_m_shift(x);
|
||||
}
|
||||
}
|
||||
|
||||
@ -59,7 +59,7 @@ void gps_l2c_m_code_gen_complex_sampled(std::complex<float>* _dest, unsigned int
|
||||
{
|
||||
int32_t _code[GPS_L2_M_CODE_LENGTH_CHIPS];
|
||||
|
||||
if (_prn<51)
|
||||
if (_prn>0 and _prn<51)
|
||||
{
|
||||
gps_l2c_m_code(_code, _prn);
|
||||
}
|
||||
@ -86,6 +86,7 @@ void gps_l2c_m_code_gen_complex_sampled(std::complex<float>* _dest, unsigned int
|
||||
// The length of the index array depends on the sampling frequency -
|
||||
// number of samples per millisecond (because one C/A code period is one
|
||||
// millisecond).
|
||||
//TODO: Check this formula! Seems to start with an extra sample
|
||||
|
||||
_codeValueIndex = ceil((_ts * ((float)i + 1)) / _tc) - 1;
|
||||
|
||||
|
||||
@ -84,6 +84,7 @@ DECLARE_string(log_dir);
|
||||
#include "gnss_block/file_signal_source_test.cc"
|
||||
#include "gnss_block/fir_filter_test.cc"
|
||||
#include "gnss_block/gps_l1_ca_pcps_acquisition_test.cc"
|
||||
#include "gnss_block/gps_l2_m_pcps_acquisition_test.cc"
|
||||
#include "gnss_block/gps_l1_ca_pcps_acquisition_gsoc2013_test.cc"
|
||||
//#include "gnss_block/gps_l1_ca_pcps_multithread_acquisition_gsoc2013_test.cc"
|
||||
#if OPENCL_BLOCKS_TEST
|
||||
|
||||
Loading…
Reference in New Issue
Block a user