We now use highlight.js in raw HTML mode on the server, rather than
trying to use it with the fakedom. This causes problems with fakedoms
inability to get textContent for a node that has been created by
assigning innerHTML. So we extend the fakedom to allow the original
text content to be saved.
See #2778 for discussion.
I used this test:
console.time();for(var t=0; t<200; t++)
{$tw.wiki.filterTiddlers("[all[tiddlers+shadows]sameday[20170210]]");};c
onsole.timeEnd()
Before this patch, I got speeds of approx 190ms, versus 140ms
afterwards.
Note that the ability to add a cache property like this is only
possible because tiddler objects are immutable.
Like the load command except retrieves the file over HTTP/HTTPS.
Allows experimentation with server-side twederation
This is a cleaned up version of code that I wrote last year at TWEUM
2016 @inmysocks @pmario @twMat @xcazin
* putSaver: detect edit conflicts to prevent clobbering, if possible
if the server supplies an ETag, we send it back when saving, allowing
the server to detect edit conflicts and respond with 412 (cf.
https://www.w3.org/1999/04/Editing/)
caveats:
* this only kicks in after the first save, as we don't have access to
the ETag when first loading the document
* there's no recovery mechanism (e.g. resetting `this.etag` in order to
force clobbering), other than manually reloading the document
* putSaver: retrieve ETag upon initialization for clobbering protection
this addresses one of the caveats from the previous commit
(2d75cb83af) - while theoretically prone
to a race condition, it seems unlikely that saving will be triggered
before the server responds
* putSaver: simplify URI extraction
this simplifies the approach introduced in
f51f6bf774, with the purpose of removing
the fragment identifier
* putSaver: localize error message
* putSaver: switch to built-in HTTP helper
in the process, fixed ETag assignment in `#save` method (was
`this.etag`, now `self.etag`) as well as a syntax error due to a missing
closing brace
* putSaver: consolidate URI handling
The code here had got a bit broken by some PRs that I should have
checked more carefully. I’ve done a major refactoring which will
hopefully make it easier to understand, and fixes a number of problems:
* Problem with eg .md tiddlers not being deleted correctly
* Problem with Windows path separators not being usable within
$:/config/FileSystemPaths on Windows
* Problem with filename clashes not being detected correctly when
saving to a different directory via $:/config/FileSystemPaths
* Enables slashes within tiddler titles to be mapped into folders
* Enables plain text files like .md and .css to be saved with .meta
files instead of as .tid files (see #2558)
* No longer replaces spaces with underscores
As this is such a major update, I’d be grateful if Node.js users could
give it a careful run through — in particular, you’ll need to try
creating new tiddlers of various types and ensure that the expected
files are created.
* allows to add a new tagname hitting enter
see: https://groups.google.com/forum/#!topic/tiddlywiki/wqQ8jPYG-X4
* revert changes to vanilla/base
* added "Special Keys" to KeyboardShortcuts
* added info to Creating and editing tiddlers
did not add current version of <<.from-version "5.1.14">> because it
would interrupt the flow. When changed from a noisy "New in 5.1.14" to
"(new in 5.1.14)" we might add the version info here
* revert setText & added inline styles to vanilla base
* remove fieldmangler
* commit initial edittemplate tags to merge master
* ok, now really revert to initial edittemplate tags
* move add tag via enter into tag-picker macro(s)
* add recursion protection first take
* fix problem with selectable expand
* ust path for toc-state variable instead of tag
* reactivate disabled macro call.
The request handler may be used by ExpressJS apps directly and can do most of the heavy lifting without any modification. Note that the self variable must be assignee using `[Function].bind(null,SimpleServer instance)`.
* allow radio widget to set an index in a data tiddler
* updated RadioWidget docs, with same demo macro as for CheckboxWidget
in #2103
* removed docs in widget code (seems the wrong place)
* added from version to docs
* revert doc maros to master
* using wikitext-example-without-html and .tip macro now
* fix quotes
given a list `A B C D` if I run `A B C D +[move:-1 [A]]` I get `B C A D`. However, if I were to do `A B C D +[move:1[D]]` it doesn't wrap around, and I get `A B C D`. This fixes that such that `A B C D +[move:-1 [A]]` gives 'A B C D`
When renaming an existing tiddler, the edit template now shows a
checkbox that determines whether or not to relink references to the
tiddler in the list or tags fields of other tiddlers.
* Make expand/collapse state be global across all tiddlers
* Remove “Show raw text” option, now that we’ve got the two expandable
areas for raw and wikified text
* Hide raw text by default
* Accentuate currently open tiddler
I’m fixing this now to show how the tabs macro can be changed to
accommodate the change, but we may yet decide to reverse out the change
in order to maintain backwards compatibility.
One problem with changes like this is that there’s no easy way to find
out where it impacts the core UI. The tabs macro is now fixed, but
perhaps there’s more obscure things that are still broken in the core.
If we do opt to reverse the change to preserve backwards compatibility,
we could add a way to explicitly trigger the new behaviour. For
example, a new attribute `updateState=“yes”`.
Yet another alternative is to make completely new alternative to the
list widget with revised semantics, that authors can opt-in to. For
example `<$loop>`. (There was another issue we discussed a year or two
ago about adding support for an index variable which may be a candidate
for fixing at the same time).
* Refactored control panel “Plugins” tab to make the elements more
reusable
* Refactored the display of plugin tiddlers to use the same format as
the control panel (as suggested, I think by @danielo515), adding the
shadow tiddler listing as an overridable extension tab
* Added a new tab in the “More” sidebar providing quick access to all
installed plugins
This fixes a problem introduced in
c7b31b0242.
The changes by @tobibeer inadvertently made the regular expression
evaluation significantly more expensive because of lookahead. The is
less elegant but reverts the performance problem.
* return all wikiparserrules w/o operand
* simpler layout & code / updated instruction details
Also wanted to link each rule to the official docs using a dictionary at
`$:/language/Docs/ParserRules/`. However, without #2194 this is not
doable.
This commit permits language plugins to carry the field
“text-direction” with the value “rtl” to trigger right-to-left layout
of the entire page. We also adjust the sidebar layout to work in RTL
mode.
There are still a number of problems to be addressed:
* Brackets and other punctuation incorrectly placed within en-GB UI text
* System tiddler titles are rendered semi-back-to-front (eg
`languages/ca-ES/:$`)
Starting to address #1845 and the discussion in #2523.
We were using `String.prototype.replace()` without addressing the
wrinkle that dollar signs in the replacement string have special
handling. This caused problems in situations where the replacement
string is derived from user input and contains dollar signs.
Fixes#2517
* Save binary tiddlers with meta file
The filesystemadaptor plugin was a little simplistic in its
understanding of a binary file. It was using the typeInfo dictionary to
choose what tiddler types were binary (and hence needed a meta file when
saving).
I looked as if it was trying to be smart by looking for the hasMetaFile
*OR* had the encoding of base64. Unfortunately the typeInfo only defined
image/jpeg and so any other base64 encoded tiddler was assumed to be of
type text/vnd.tiddlywiki.
The net effect was only JPG images got a meta file and everything else
were saved as .tid files with base64 encoding. It all still worked but
made working with binary data in a Git repo a bit daunting.
There is enough information in the $tw.config.contentTypeInfo to
determine if a tiddler type is encoded with base64 or not. A better list
is available from boot/boot.js who registers all the types thorough the
registerFileType and marks then with base64 were appropriate.
This commit uses the typeInfo dictionary first for any filesystem
specific overrides, then the contentTypeInfo, and finally defaults to
the typeInfo["text/vnd.tiddlywiki"]. It also eliminates the now
unnecessary override for image/jpeg.
I think this might have been the original intent from commit 10b192e7.
From my limited testing all files described in boot/boot.js (lines
1832-1856) with an encoding of base64 now save as the original binary
and a meta file. Meaning that when you start the node server and then
drag-n-drop a binary file (i.e. image/png) it will PUT to the server
and then save it on the filesystem as-is allowing the file to be managed
as a binary file and not a text file. (Binary diffs are better and
GitHub supports them as well).
* Prevent duplicate file extensions
A side effects of using the $tw.config.contentFileInfo in the previous
commit is that it will always append a file extension to the tiddler
title when saving. In most cases this is the correct course of action.
However, sometimes that title is already a proper filename with an
extension (for example importing 'foobar.png' would save a file named
'foobar.png.png') which seemed silly.
This commit simply checks to make sure the title does not already end
with the file extension before appending it to the filename. A little
convenience really.
Since IE apparently doesn't have the String endsWith method I took the
liberty to add a helper method to $tw.utils trying to follow the other
polyfill patterns. I figured this was more generic and readable then
attempting to use a one-off solution inline. I got the polyfill code
from MDN.
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/endsWith#Polyfill
Is strEndsWith the best method name?
Passing the static content through the `$:/core/templates/html-tiddler`
template made it impossible to produce output that wasn’t HTML encoded
(eg stylesheets).
It turns out that IE11 has a horrible bug whereby setting the
placeholder attribute before setting the text will trigger an input
event:
https://social.msdn.microsoft.com/Forums/ie/en-US/ae4832b0-8eee-4729-b93
3-a9977ea1b583/internet-explorer-input-event-get-fired-when-settingunset
ting-the-placeholder?forum=iewebdevelopment
There have been long standing problems with the buttons not working in
Firefox, and now a [further
problem](https://groups.google.com/d/msg/tiddlywiki/GlsruQyPOag/BAhnI2mt
BgAJ) has come to light, and been similarly hard to resolve.
On balance, I’ve decided to remove the undo/redo buttons from the
toolbar (the ctrl/cmd-Z shortcut is still operational), thus avoiding
the problems, and saving some space in the core.
This is quite a big change: a new way to invoke action widgets.
The advantage is that it solves #2217 and #1564, a long running problem
that prevented us from adding action widgets to widgets that modify the
store.
This commit adds the new technique for the button and keyboard widgets,
but also extends the select widget to trigger action widgets for the
first time
* Change the negation logic to address an edge case
Make it possible to get an interval ending with yesterday or starting with tomorrow.
* "days" filter: adjust documentation
When saving new tiddlers on node.js, allow the user to override the path of the
generated .tid file. This is done by creating a tiddler
$:/config/FileSystemPaths which contains one or more filter expressions, one
per line. These filters are applied in turn to the tiddler to be saved, and
the first output produced is taken as a logical path relative to the wiki's
tiddlers directory. Any occurences of "/" in the logical path are replaced with
the platform's path separator, the extension ".tid" is appended, illegal
characters are replaced by "_" and the path is disambiguated (if necessary) in
order to arrive at the final tiddler file path. If none of the filters matches,
or the configuration tiddler does not exist, fall back to the previous file
naming scheme (i.e. replacing "/" by "_").
This implies we will now, for tiddlers matching the user-specified filters,
create directory trees below the tiddlers directory. In order to avoid
cluttering it with empty directory trees when renaming or removing tiddlers, any
directories that become empty by deleting a tiddler file are removed
(recursively).
Benefits of this configuration option include the ability to organize git
repositories of TiddlyWikis running on node.js, ability to replace characters
that cause trouble with particular operating systems or workflows (e.g. '$' on
unix) and the ability to replicate tiddler "paths" in the filesystem (by
including a filter like "[!has[draft.of]]") without forcing such a (potentially
problematic) change on all users.
There’s currently 249 changed files in the text-editor branch, which
exceeds github.com’s ability to display the diffs. So we’ll put the
images straight into master to get the diffs down by 32 files.
Entities such as `👷` were broken because
`String.fromCharCode()` is not fully Unicode aware. The fix is to use
`String.fromCodePoint()` where available.
Noted by @ericshulman
List fields (such as tags) when evaluated to produce tiddlers result in empty arrays. Using the exact not equals, an empty array is not the same as an empty string. By using equivelent not equals, we state that the field is either != "" or anything that can be coerced to "". Which, based on https://dorey.github.io/JavaScript-Equality-Table/ is `false` `0` `[]` or `[[]]`` neither `false` nor `0` can be set as a tiddler field as both will end up being quoted (`"false"`, `"0"`) so this should work.
Fixed a side-effect of 03519c14b0 from
@matabele whereby the current tiddler is overwritten by the
`<$tiddler>` widget, which means that it is not accessible when
rendering the caption of the tab.
This causes a problem with eg the “Add Plugins” modal where it breaks
the count on the tabs.
When using the widget with only short form SetText attributes (field="value) -- the default field (text) of the default tiddler is set to the default value ("") -- thus clearing the text field of the current tiddler. I have inserted a conditional to test for the presence of the `field` attribute.
Whilst I was about this, I have inserted code to enable the setting of any number of TextReferences -- this fixes the issue of only being able to set one index per widget and also allows different tiddlers to be targeted by the same widget.
element that has scrollbars. The wrapper element with the
scroll bar does not need to be a direct parent of the text area.
**update:** fixed a bug that came up in the discussion
This is fixed now: https://github.com/Jermolene/TiddlyWiki5/pull/1933#issuecomment-141774881
The problem was the check in getScrollContainer()
Because of the refresh problems with the other widgets triggering action-widgets I am doing this one by itself. I hadn't included it before.
This shouldn't have any more problems than the button widget does, and any problems caused by it should be fixed by any fix we use for the button widget. See #1564 for more background
Action widget designed to apply filters to the current list and save the modified list back to the list. The widget is able to manipulate lists in any field or any data index of the target tiddler, and includes an option to manipulate the tags of the target tiddler. The widget is used in conjunction with the extended list operator filters (xlistops.js)
