- Move container opening (and gui handling) into a separate class
- Move turtle/computer placement code onto the block
- GUIs now use gui{Left,Top} instead of calculating it manually.
- IPeripheralTile is now exposed in the API.
This uses a similar approach to ComputerThread: executors store how long
they've spent executing tasks. We then use that time to prioritise
executors.
One should note that we use the current runtime at the point of adding
to the queue - external tasks will not contribute towards it until a
later execution.
This effectively acts as a public interface to canExecuteExternal() and
consumeTime(). It's hopefully sufficiently general that we can mess
around with the backend as much as we like in the future.
One thing to note here is that this is based on a polling API, as it's
largely intended for people running work every tick. It would be
possible to adapt this with callbacks for when work is available,
etc..., but that was not needed immediately.
This also removes IComputerOwned, as Plethora no longer needs it.
Unlike ComputerThread, we do not have a single source of tasks, and so
need a smarter way to handle scheduling and rate limiting. This
introduces a cooldown system, which works on both a global and
per-computer level:
Each computer is allowed to do some work for 5ms. If they go over that
budget, then they are marked as "hot", and will not execute work on the
next tick, until they have cooled down. This ensures that _on average_
computers perform at most 5ms of work per tick.
Obviously this is a rather large time span, so we also apply a global
10ms to all computers. This uses the same cooldown principle, meaning we
keep to an average of 10ms, even if we go over budget.
We were not updating the property instances, so we never actually used
the new values. This changes the syncing method to just copy values from
the new config file, meaning comments and structure are preserved from
the old one.
Note, we cannot just call Config.load(File) again, as the defaults are
no longer accurate.
- We send special packets for key and mouse events, which are then
processed by the container's InputState.
- InputState keeps track of currently held keys and mouse buttons.
- When closing the container, we queue key_up/mouse_up events for any
pending buttons.
We attempted to simplify this 0bfb7049b0,
but that change now means that minimumVirtualRuntime is not updated. As
a result, new tasks will have a runtime of 0 when the queue is empty.
- Some performance improvements to JEI recipe resolver
- Use a shared map for upgrade items, meaning we only need one map
lookup.
- Cache the basic upgrade recipes.
- Use the MC version within project rather than version name.
Before IPocketAccess.getEntity would return the entity which last held
fthis computer, even if not holding it any more. As
ba823bae13 describes, this caused
pocket.equip/pocket.unequip to dupe items.
We move the validation from the PocketAPI into the main IPocketAccess
implementation, to ensure this issue does not occur elsewhere. Note, we
require a separate method, as this is no longer thread-safe.
We also now return ok, err instead of throwing an exception, in order to
be consistent with the turtle functions. See dan200/ComputerCraft#328.
This makes Pocket API not equip/unequip upgrades when the pocket
computer is outside of the player inventory (e.g. dragging,
dropped, placed in a chest).
Oh goodness, this is going to painful to update to 1.13.
We now translate:
- Computer/Disk ID tooltips
- /computercraft descriptions, synopsises and usages. The last of these
may not always be translated when in SMP, as it is sometimes done on
the server, but the alternative would be more complex than I'm happy
with.
- Tracking field names. Might be worth adding descriptions too in the
future.
Also cleanup a couple of other translation keys, so they're more
consistent with Minecraft.
Closes#141
- Turtle and pocket computers provide a "creator mod id" based on their
upgrade(s).
We track which mod was active when the upgrade was registered, and
use that to determine the owner. Technically we could use the
RegistryLocation ID, but this is not always correct (such as
Plethora's vanilla modules).
- We show all upgraded turtles/pocket computers in JEI now, rather than
just CC ones.
- We provide a custom IRecipeRegistryPlugin for upgrades, which
provides custom usage/recipes for any upgrade or upgraded item. We
also hide our generated turtle/pocket computer recipes in order to
prevent duplicates.
Previously we would register the recipes within our code, but the
advancements were written manually. This now generates JSON files for
both the advancement and recipe.
While this does mean we're shipping even more JSON, we'll need to do
this for 1.13 anyway, and means our advancements are guaranteed to be
consistent.
On a side note, a couple of other changes:
- Turtle upgrades are now mounted on the right in the creative
menu/fake recipes. This means the upgrade is now clearly visible in
the inventory.
- We no longer generate legacy turtle items at all: we'll always
construct turtle_expanded.
- Several peripheral items are no longer registered as having sub-types
(namely advanced and full-block modems).
- We only have one disk advancement now, which unlocks all 16 recipes.
- We have removed the disk conversion recipes - these can be
exposed through JEI if needed.
This allows wireless modems (advanced and normal) to be used in
multiparts. There's a very limited set of uses for this (mostly allows
using Chisel and Bits with them), but it's very simple to do.
I'd like to look into MCMP support for wired modems/cables in the
future, but this will be somewhat harder due to their pre-existing
multiblock structure.
Similarly, might be fun to look into CBMP compatibility.
- Share the ILuaContext across all method calls, as well as shifting it
into an anonymous class.
- Move the load/loadstring prefixing into bios.lua
- Be less militant in prefixing chunk names:
- load will no longer do any auto-prefixing.
- loadstring will not prefix when there no chunk name is supplied.
Before we would do `"=" .. supplied_program`, which made no sense.
For instance, `pastebin run https://pastebin.com/LYAxmSby` will now
extract the code and download appropriately. Also add an error message
when we received something which is not a valid pastebin code.
See #134.
This runs tests on CraftOS using a tiny test runner that I originally
knocked up for LuaDash. It can be run both from JUnit (so IDEA and
Gradle) and in-game in the shell, so is pretty accessible to work with.
I also add a very basic POC test for the io library. I'd like to flesh
this out soon enough to contain most of the things from the original io
test.
Before it was not actually selected until the task had yielded for the
first time. If a computer did not yield (or took a while to do so),
nothing would actually show up.
- CobaltLuaMachine/ComputerExecutor can now be paused - this suspends
the machine via a debug hook. When doing work again, we resume the
machine, rather than starting a new task.
- TimeoutState keeps track of how long the current execution of this task
has gone on for, when its deadline is, and the cumulative execution time of
this task.
- ComputerThread now uses a CFS based scheduler in order to determine which
computer to next run.
- Only update all runtimes and the minimum runtime when queuing new
exectors. We only need to update the current executor's runtime.
- Fix overflows when comparing times within TimeoutState.
System.nanotime() may (though probably won't) return negative values.
- Hopefully explain how the scheduler works a little bit.
- Runners would set their active executor before starting resetting the
time, meaning it would be judged as running and terminated.
- Similarly, the cumulative time start was reset to 0, meaning the
computer had been judged to run for an impossibly long time.
- If a computer hit the terminate threshold, but not the hard abort
one, then we'd print the stack trace of the terminated thread - we
now do it before interrupting.
There's still race conditions here when terminating a computer, but
hopefully these changes will mean they never occur under normal
operations (only when a computer has run for far too long).
- Fix the timeout error message displaying utter rot.
- Don't resize the runner array. We don't handle this correctly, so
we shouldn't handle it at all.
- Increment virtualRuntime after a task has executed.
- The computer queue is a priority queue sorted by "virtual runtime".
- Virtual runtime is based on the time this task has executed, divided
by the number of pending tasks.
- We try to execute every task within a given period. Each computer is
allocated a fair share of that period, depending how many tasks are
in the queue. Once a computer has used more than that period, the
computer is paused and the next one resumed.
TimeoutState now introduces a TIMESLICE, which is the maximum period of
time a computer can run before we will look into pausing it.
When we have executed a task for more than this period, and if there are
other computers waiting to execute work, then we will suspend the
machine.
Suspending the machine sets a flag on the ComputerExecutor, and pauses
the "cumulative" time - the time spent handling this particular event.
When resuming the machine, we restart our timer and resume the machine.
Oh goodness, when will it end?
- Computer errors are shown in red.
- Lua machine operations provide whether they succeeded, and an
optional error message (reason bios failed to load, timeout error,
another Lua error), which is then shown to the user.
- Clear the Cobalt "thrown soft abort" flag when resuming, rather than
every n instructions.
- Computers will clear their "should start" flag once the time has
expired, irrespective of whether it turned on or not. Before
computers would immediately restart after shutting down if the flag
had been set much earlier.
Errors within the Lua machine are displayed in a more friendly
When closing a BufferedWriter, we close the underlying writer. As we're
using channels, this is an instance of sun.nio.cs.StreamEncoder. This
will attempt to flush the pending character.
However, if throwing an exception within .write errors, the flush will
fail and so the underlying stream is not closed. This was causing us to
leak file descriptors.
We fix this by introducing ChannelWrappers - this holds the wrapper
object (say, a BufferedWriter) and underlying channel. When closed, we
dispose of the wrapper, and then the channel. You could think of this as
doing a nested try-with-resources, rather than a single one.
Note, this is not related to JDK-6378948 - this occurs in the underlying
stream encoder instead.
- TimeoutState uses nanoseconds rather than milliseconds. While this is
slightly less efficient on Windows, it's a) not the bottleneck of Lua
execution and b) we need a monotonic counter, otherwise we could
fail to terminate computers if the time changes.
- Add an exception handler to all threads.
- Document several classes a little better - I'm not sure how useful
all of these are, but _hopefully_ it'll make the internals a little
more accessible.
- Move state management (turnOn, shutdown, etc...) event handling and
the command queue into a ComputerExecutor
- This means the computer thread now just handles running "work" on
computer executors, rather than managing a separate command queue +
requeuing it.
- Instead of setting soft/hard timeouts on the ILuaMachine, we instead
provide it with a TimeoutState instance. This holds the current abort
flags, which can then be polled within debug hooks.
This means the Lua machine has to do less state management, but also
allows a more flexible implementation of aborts.
- Soft aborts are now handled by the TimeoutState - we track when the
task was started, and now only need to check we're more than 7s since
then.
Note, these timers work with millisecond granularity, rather than
nano, as this invokes substantially less overhead.
- Instead of having n runners being observed with n managers, we now
have n runners and 1 manager (or Monitor).
The runners are now responsible for pulling work from the queue. When
the start to execute a task, they set the time execution commenced.
The monitor then just checks each runner every 0.1s and handles hard
aborts (or killing the thread if need be).
- Rename unload -> close to be a little more consistent
- Make pollAndResetChanged be atomic, so we don't need to aquire a lock
- Get the computer queue from the task owner, rather than a separate
argument.
Ideally we'd add a couple more tests in the future, but this'll do for
now.
The bootstrap class is largely yoinked from CCTweaks-Lua, so is a tad
ugly. It works though.
