problem is that some clients refuse to connect to severs that only offer
1024. For interoperability it would be best to just use 4096, but that
takes minutes, even on current hardware.
parse.c:284: warning: suggest parentheses around operand of '!' or
change '&' to '&&' or '!' to '~'
The expression looks dubious, this should probably be
an if-not-set, then... test.
When the write buffer space grows too large, ngircd has to disconnect
the client to avoid wasting too much memory.
ngircd logs this with a scary 'write buffer overflow' message.
Change this to a more descriptive wording.
Not all servers (and services!) using the RFC1459 protocol style send
prefixes on all commands; so don't require them to do so.
This relaxes the requirements introduced by commit 15775e679.
We re-use the same helper function for both forward lookups
(when we want to connect to a peer server) and for validation of reverse
loopups (where we make a lookup on the hostname returned
by a reverse lookup on the IP address that connected).
Problem:
When ConnectIPv6=no, the forward lookup helper sets the adderss family
to AF_INET, and, if out client connected via ipv6, we fail to validate
the result.
Thus move the ConnectIPvX check out of the helper.
we do not need this for cryptographic purposes, but we can do better
than plain srandom(getpid()).
Also, keep in mind that rng state is inherited across fork(), so re-init
it in the child.
When enabled, this configuration option lets ngIRCd send a PING with an
numeric "token" to clients logging in; and it will not become registered
in the network until the client responds with the correct PONG.
This is used by QuakeNet for example (ircu/snircd), and looks like this:
NICK nick
:irc.example.net PING :1858979527
USER user . . :real name
PONG 1858979527
:irc.example.net 001 nick :Welcome to the Internet Relay Network ...
Make sure that all commands received from other servers do have
valid prefixes.
Only exceptions are PING and ERROR commands that can occure without
prefixes when generated by the remote peer itself.
* CloakUserHost:
Add a note not to use a percent sign ("%") in CloakHost variable
Rename ClientHost to CloakHost, and ClientUserNick to CloakUserToNick
Don't use "the.net" in sample-ngircd.conf, use "example.net"
ngircd.conf.5: document "ClientHost" and "ClientUserNick"
Move "ClientHost" and "ClientUserNick" to end of [Global] section
ClientUserNick setting
ClientHost setting
* QuitOnHTTP:
Only "handle" HTTP commands on unregistered connections
Don't use IRC_QUIT_HTTP() if STRICT_RFC is #define'd
IRC_QUIT_HTTP(): enhance error message
Move IRC_QUIT_HTTP() below IRC_QUIT()
quit on HTTP commands: GET & POST
* bug72-WHOIS-List:
Add "whois-test" to testsuite and distribution archive
Add support for up to 3 targets in WHOIS queries.
also allow up to one wildcard query from local hosts.
Follows ircd 2.10 implementation rather than RFC 2812.
At most 10 entries are returned per wildcard expansion.
WHOIS test cases by Dana Dahlstrom.
previously, any client could join in this configuration:
[Channel]
Name = #test
Modes = tnk
KeyFile = /tmp/foobar
fix this by checking for zero-length key before comparing
key to channel key.
This fixes the followin GCC warning on modern Linux systems as well:
irc-login.c: In function ‘Hello_User’:
irc-login.c:876: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result
This patch
- makes the server write buffer bigger: 64k,
- makes the regular write buffer bigger: 32k,
- tries to flush the write buffer starting at 4K.
Before this patch, a client got disconnected if the buffer flushing at 4k
failed, now regular clients can store up to 32k and servers up 64k even
if flushing is not possible at the moment (e.g. on slow links).
Don't do a NULL-pointer dereference when a remote server using the
IRC+ protocol sends an invalid PASS command without the required
<serverversion> parameter ...
Port number 0 marks remote servers that try to connect to this
daemon, but where this daemon never tries to establis a connection
on its own: only incoming connections are allowed.
Don't use isdigit() function any more, because it only checks the
first character of the variable value and because it doesn't know
about the minus sign which is required e.g. for "Group = -1".
The MOTD file is read in Read_Config(), so don't read it when handling
the "MotdFile" configuration variable. Instead make sure that it is
initialized properly when (re-)reading the configuration.
Fix commit 5a34bb203a:
It is not enough to strip the "No" prefix from "Ident" and "PAM",
but we have to introduce the new [Features] section to fix all
warning messages of ngIRCd.
Variables "Ident" and "PAM" in [Global] are completely wrong :-(
This enables other servers, services and IRC operators to change
channel topics, even when the client is not joined to this channel.
Now the handler for TOPIC behaves like the one for MODE.
This generic function tests if a client is allowed to do administrative
tasks to a specific channel:
- servers and services are always truested ("allowed everything"),
- channel operators are allowed,
- IRC operarors are allowed if OperCanUseMode is set in the config.
libc should know better than us.
Also, this helps debugging with tools like valgrind:
When you allocate an array of size x, and then erronoulsy
use x+1 valgrind cannot detect the bug because due to ALIGN_()
made by array.c we might have allocated more than size x...
ngircd unfortunately uses several options using double-negation, e.g.
NoIdent = No, NoPam = No, etc.
This renames all options by dropping the "No" prefix, e.g.
"NoIdent = no" becomes "Ident = yes".
The old options will continue to work, but will cause a warning
message.
Also update man pages and default config.
To prevent silly
'Ident = yes' from appearing in --configtest output in the
'ident support not compiled in and Ident Option not used' case,
make default value depend on feature availability.
If feature is available, enable by default, otherwise disable.
We might consider moving these options to a new
[Feature]
section, or something like that, because none of these options are
essential.
Another possible improvement:
'Ident = yes' option in ngircd.conf causes a warning if ngircd was
built without ident support.
This does not happen with e.g. zeroconf....
Configuration variables "MotdFile" and "MotdPhrase" are mutually
exclusive; so don't display content in both of them when running
"ngircd --configtest": instead remember which one is beeing used.
The information written to the "error file" (/tmp/ngircd-<PID>.err) when
ngIRCd is compiled with debug code enabled isn't that usefule, so don't
create this file at all.
If a hostname resolves to more than one IP address (round-robin DNS,
IPv4 and IPv6) and an attempt to connect to the first address fails,
ngIRCd should try to connect to the 2nd address, 3rd address etc.
But because of a wrong variable used in the call to New_Server(),
the wrong server structure has been used in further connection attemps
which possibly lead to connection attempts to already connected servers.
disable pam_fail_delay() only is available starting with Mac
OS X 10.6; but we use the 10.5 SDK for campatibility, so don't use
this function at all when building using Xcode.
This allows to compile ngIRCd using a pre-ANSI K&R C compiler again:
all source files are automatically converted by the included ansi2knr
program (of GNU automake/autoconf) before compiling them with the
K&R C compiler, but a few coding standards must be met.
Tested on Apple A/UX 3.x.
Regression testing on Linux and Mac OS X.
If ngIRCd is compiled to register its services using ZeroConf (e.g. using
Howl, Avahi or on Mac OS X) this parameter can be used to disable service
registration at runtime.
This fixes the following gcc compiler warning:
tool.c: In function 'ngt_SyslogFacilityName':
tool.c:195: warning: return discards qualifiers from pointer target type
The new option "SyslogFacility" deines the syslog "facility" to which
ngIRCd should send log messages.
Possible values are system dependant, but most probably "auth", "daemon",
"user" and "local1" through "local7" are possible values; see syslog(3).
Default is "local5" for historical reasons.
These both functions translate syslog facility names to ID numbers
and vice versa. On systems that don't define the facilitynames[] array
in syslog.h, we try to build one ourself.
This fixes the following gcc warning, emitted by Xcode:
src/ngircd/sighandlers.c: In function 'Signal_Callback':
src/ngircd/sighandlers.c:239: warning: implicit conversion shortens 64-bit value into a 32-bit value
Signals_Init() must only be called once.
This does not affect any ngircd release version.
Earlier version of this patch moved the io and sighandler
initialization before the while() loop, but as Alexander
Barton noticed that broke all systems without builtin select
support in io.c...
- declare signals_catch[] array not between the function implementations.
- rename now local function NGIRCd_Rehash() to Rehash().
- remove empty and therefore not used "catch SIGHUP; break;".
This patch allows ngIRCd to dump its internal state (connected clients,
actual configuration) when compiled with --enable-debug. The daemon
catches two more signals:
- SIGUSR1: toggle debug mode (on/off),
- SIGUSR2: dump internal state to console/syslog.
now that the main signal handling is done from the dispatcher
loop we can call NGIRCD_Rehash() directly.
the /REHASH handler can queue the Rehash() function for
execution by sending a SIGHUP. It will be run when we
return back to the dispatch loop.
Allows to defer/queue signal processing for execution on the next
event dispatch call, i.e. we can perform any signal action in
normal, non-signal context.
Example uses:
- Reload everything on HUP without writing a global "SIGHUP_received"
variable
- Dump status of internal Lists on SIGUSR1, etc.
Fix synchronization of established connections and configured server
structures after a configuration update:
- Not only test servers that already have a connection, but also check
and update configured servers to which a new connection is beeing
established (SERVER_WAIT state).
- And do the server name comparision case-insensitive.
Let CheckServers() not only skip servers that already have a
connection, but also skip servers to which a new connection is
already beeing established (SERVER_WAIT state).
This fixes PING-PONG lag calculation (which resulted in "0" before).
The "lastping" time is still reset it if a time shift backwards has
been detected to prevent the daemon from miscalculating ping timeouts.
When a client has user mode "x" set, its real hostname is cloaked
by substituting it with the server name (as configured in ngircd.conf).
Restricted clients (user mode "r") aren't allowed to change mode "x".
Please note that hostname cloaking is only in effect in server-client
communication! The server still uses the real hostname for its own
logging and for all server-server communication -- therefore all servers
in the network must support user mode "x" to prevent older servers
from leaking the real hostname of a cloaked client!
These two functions return the cloaked hostname, if the client has
enabled hostname cloaking indicated by the -- still to implement --
user mode "x". See furter patches :-)
previously, the given MotdFile file was read whenever a client
requested it.
Change handling to read the MotdFile contents into memory once
during config file parsing.
Two side effects:
- changes to the MOTD file do not have any effect until ngircds
configuration is reloaded
- MOTD file does no longer have to reside in the chroot directory
(the MOTD contents will then not be re-read on reload in that case)
This avoids a race and potentionally killing the wrong process on
systems that use randomized process IDs; now the child itself is
responsible to exit in a timely manner using SIGALRM.
Some variables are only used when compiling with IDENT or PAM support
or when the debug code is enabled. Mark them as "unused" so that gcc
doesn't generate warnings when neither of these options is enabled.
When the "NoPAM" configuration option is set and ngIRCd is compiled
with support for PAM, ngIRCd will not call any PAM functions: all
connection attemps without password will succeed instead and all
connection attemps with password will fail.
If ngIRCd is compiled without PAM support, this option is a dummy
option and nothing changes: the global server password will still be
in effect.
For each client connection a child process is forked which handles the
actual PAM authentication and reports the result back to the master
process using a pipe for communication.
While the PAM authentication is in process the daemon does not block.
The Client_SetOrigUser() function is used to store the peer-provided
user name (see USER command) in its original form, not changed by
IDENT results, for example.
Rename Log_Init_Resolver, Log_Exit_Resolver, and Log_Resolver to
Log_Init_Subprocess, Log_Exit_Subprocess, and Log_Subprocess and
make it more generic thereby.
The logic isn't as described in the source and intended by this code:
ngIRCd doesn't wait for the asynchronous resolver process until the set
penalty time is over, but until the forked process terminates or the
initial connection timeout (= PongTimeout) triggers.
So don't set the penalty time at all and remove the wrong comment.
We want to use this process status variable not only for the
resolver subprocesses but other asynchronous tasks as well;
so let's name it more generic.
The new "module" proc.c is used for functions dealing with child
processes. At the moment, it is only used by the asynchronous resolver.
All the functions already implemented habe been migrated from the
resolver code base, and the rest of the ngIRCd source code has been
adepted to the new namespace and calling conventions.
The goal is to develop "generic" process handling functions that can
be used for other purposes as well, e.g. running processes on client
connects etc.
The wrongly placed #endif lead to the following compiler warnings:
conn.h:125: warning: redundant redeclaration of ‘Conn_Count’
conn.h:125: warning: previous declaration of ‘Conn_Count’ was here
conn.h:126: warning: redundant redeclaration of ‘Conn_CountMax’
conn.h:126: warning: previous declaration of ‘Conn_CountMax’ was here
conn.h:127: warning: redundant redeclaration of ‘Conn_CountAccepted’
conn.h:127: warning: previous declaration of ‘Conn_CountAccepted’ was here
Users having the user mode "c" set receive NOTICE messages on each
new client connection to the local server as well as disconnects.
Only IRC operators (users having the mode "o" set) are allowed to
set the 'c' user mode.
These connect/disconnect messages can be useful for open proxy
scanners -- BOPM (http://wiki.blitzed.org/BOPM) is now functional
with ngIRCd, for example.
"I've been wanting this for years and finally took the 5 minutes to
patch it in. I took the response code (275) from whatever's running
OFTC's IRC network."
-- Neale Pickett <neale@woozle.org>, Fri, 11 Jun 2010 17:32:41 -0500
(OFTC is running Hybrid ircd.)
It is not possible to call Conn_Close() after Client_Destroy() has been
called, because Conn_Close wants to access the CLIENT structure which
then has been freed already.
Fix IRC_KILL to use Conn_Close() for local clients and Client_Destroy()
for remote clients only (and never both).
When we get there then the ssl handshake has failed, or
we could not create a ssl context because ssl library
initialization failed on startup.
Reflect that in the log message.
When ngIRCd restarts, all the connection counters are preserved now,
as well as the command counters for example.
It's unclear if resetting or not resetting is the "correct" behaviour,
but it's quite clear that the behaviour should be consistent for all the
counters ngIRCd uses ...
And initializing "WCounter", the global but temporary write counter,
is not necessarry at all: it is initialized (reset) before its use in
the command parser (see parse.c).
The RPL_STATSCONN numeric (250) displays information about the
highest simoultaneous connection count and the number of all
accepted connections since the daemon started up.
Used by ircd-Hybrid, Bahamut, and Unreal for example.
This patch enables ngIRCd to count the highest maximum simultaneous
connections and all the connections accepted since startup.
New functions:
- Conn_Count(): get current connections
- Conn_CountMax(): maximum simultaneous connections
- Conn_CountAccepted(): number of connections accepted
This fixes the following error when compiling on e.g. FreeBSD 6.x:
In file included from conn.c:40:
/usr/include/netinet/ip.h:160: error: syntax error before "n_long"
/usr/include/netinet/ip.h:163: error: syntax error before "n_long"
This patch fixes two warnings of gcc 4.4.3 when used with eglibc 2.11.1:
ngircd.c: In function ‘NGIRCd_Init’:
ngircd.c:801: warning: ignoring return value of ‘chdir’, declared with
attribute warn_unused_result
conn.c: In function ‘Simple_Message’:
conn.c:2041: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result
The first by checking the return code and an appropriate error message,
the second by "better" ignoring it (which is correct there!) ...
The WEBIRC command is used by some Web-to-IRC gateways to set the correct
user name and host name of users instead of their own.
Syntax: WEBIRC <password> <username> <hostname> <ip-address>
The <password> must be set using the new configuration variable "WebircPassword" in the [Global] section of ngircd.conf.
Please note that the <ip-address> is currently not used by ngIRCd (we don't store it in the CLIENT structure, only the resolved hostname).
Only clients using a SSL encrypted connection to the server are
allowed to join such a channel.
But please note three things:
a) already joined clients are not checked when setting this mode,
b) IRC operators are always allowed to join every channel, and
c) remote clients using a server not supporting this mode are not
checked either and therefore always allowed to join.
Now the numeric 004 correctly reports all the supported user and channel
modes (user modes "r" and "w" were missing), e. g.:
:a.irc.net 004 a a.irc.net ngircd-15 aiorsw biIklmnoPstv
Print "SSLOptionVar =" instead of omitting the option when
running --configtest with ssl enabled.
This better matches the behaviour of other options, e.g. ChrootDir.
