1
0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-12-16 05:00:35 +00:00
gnss-sdr/firmware/GN3S_v2/src/usrp_common.c
Javier Arribas b849b20a8c Added optional support for Sparkfun SiGe GN3S USB GPS RF sampler:
- Added a pre-compiled custom GN3S firmware.
- Added a fully-compliant GNU Radio source block for GN3S USB dongle. It can be used also from GNU Radio companion and from Python applications.
- Added a new GN3S_Signal_Source block. It is possible to disable the GN3S signal source compilation. See README.

git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@217 64b25241-fba3-4117-9849-534c7e92360d
2012-07-30 15:46:07 +00:00

133 lines
3.5 KiB
C

/*
* Code from: USRP - Universal Software Radio Peripheral (GNU Radio)
*
* Initial modifications by:
*
* Stephan Esterhuizen, Aerospace Engineering Sciences
* University of Colorado at Boulder
* Boulder CO, USA
*
* Further modifications for use with the SiGe USB module to accompany
* the textbook: "A Software-Defined GPS and Galileo Receiver: A
* Single-Frequency Approach" by Kai Borre, Dennis Akos, et.al. by:
*
* Marcus Junered, GNSS Research Group
* Lulea University of Technology
* Lulea, Sweden
*
* http://ccar.colorado.edu/gnss
*
* ---------------------------------------------------------------------
*
* GN3S - GNSS IF Streamer for Windows
* Copyright (C) 2006 Marcus Junered
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "usrp_common.h"
/* If wordwide is defined, will grab 16 bits, otherwise only
* bits 7-0 is used */
#undef wordwide
void init_usrp(void)
{
CPUCS = bmCLKSPD1; // CPU runs @ 48 MHz
CKCON = 0; // MOVX takes 2 cycles
IFCONFIG = bmIFGPIF;
//IFCONFIG = bmIFGPIF|bmIFCLKSRC|bmIFCLKOE;//|bm3048MHZ;
//IFCONFIG = bmIFGPIF|bmIFCLKSRC;
SYNCDELAY;
//REVCTL = bmDYN_OUT | bmENH_PKT; // highly recommended by docs
//SYNCDELAY;
// configure end points
EP1OUTCFG = bmVALID | bmBULK;
SYNCDELAY;
EP1INCFG = bmVALID | bmBULK | bmIN;
SYNCDELAY;
// 512 quad bulk OUT
//EP2CFG = bmVALID | bmBULK ; //| bmQUADBUF;
EP2CFG = 0;
SYNCDELAY;
// disabled
EP4CFG = 0;
SYNCDELAY;
// 512 quad bulk IN
EP6CFG = bmVALID | bmBULK | bmQUADBUF | bmIN;
SYNCDELAY;
// disabled
EP8CFG = 0;
SYNCDELAY;
// reset FIFOs
FIFORESET = bmNAKALL;
SYNCDELAY;
//FIFORESET = 2;
//SYNCDELAY;
// FIFORESET = 4; SYNCDELAY;
FIFORESET = 6;
SYNCDELAY;
// FIFORESET = 8; SYNCDELAY;
FIFORESET = 0;
SYNCDELAY;
// configure end point FIFOs
// let core see 0 to 1 transistion of autoout bit
#ifdef wordwide
EP2FIFOCFG = 0x00;
EP6FIFOCFG = bmZEROLENIN | bmAUTOIN | bmWORDWIDE;
#else
EP2FIFOCFG = 0x00;
EP4FIFOCFG = 0x00;
EP6FIFOCFG = bmZEROLENIN | bmAUTOIN;
EP8FIFOCFG = 0x00;
#endif
SYNCDELAY;
EP0BCH = 0;
SYNCDELAY;
// arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
EP1OUTBC = 0;
SYNCDELAY;
//EP2GPIFFLGSEL = 0x01;
//SYNCDELAY; // For EP2OUT, GPIF uses EF flag
EP6GPIFFLGSEL = 0x02;
SYNCDELAY; // For EP6IN, GPIF uses FF flag
/* waveform DONE when FF/EF flags get set */
EP6GPIFPFSTOP=0x01; SYNCDELAY;
//EP2GPIFPFSTOP=0x01; SYNCDELAY;
EP6AUTOINLENH = (512) >> 8;
SYNCDELAY; // this is the length for high speed
EP6AUTOINLENL = (512) & 0xff;
SYNCDELAY;
}