mirror of
https://github.com/gnss-sdr/gnss-sdr
synced 2024-12-13 11:40:33 +00:00
Adding more Teleorbit Flexiband frontend configurations (gnss-sdr config
files)
This commit is contained in:
parent
5dcc4d752c
commit
acb35ccdd9
343
conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf
Normal file
343
conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf
Normal file
@ -0,0 +1,343 @@
|
||||
; Default configuration file
|
||||
; You can define your own receiver and invoke it by doing
|
||||
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
|
||||
;
|
||||
|
||||
[GNSS-SDR]
|
||||
|
||||
;######### GLOBAL OPTIONS ##################
|
||||
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
||||
GNSS-SDR.internal_fs_hz=2500000
|
||||
|
||||
;######### CONTROL_THREAD CONFIG ############
|
||||
ControlThread.wait_for_flowgraph=false
|
||||
|
||||
;######### SUPL RRLP GPS assistance configuration #####
|
||||
GNSS-SDR.SUPL_gps_enabled=false
|
||||
GNSS-SDR.SUPL_read_gps_assistance_xml=true
|
||||
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
|
||||
GNSS-SDR.SUPL_gps_ephemeris_port=7275
|
||||
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
|
||||
GNSS-SDR.SUPL_gps_acquisition_port=7275
|
||||
GNSS-SDR.SUPL_MCC=244
|
||||
GNSS-SDR.SUPL_MNS=5
|
||||
GNSS-SDR.SUPL_LAC=0x59e2
|
||||
GNSS-SDR.SUPL_CI=0x31b0
|
||||
|
||||
;######### SIGNAL_SOURCE CONFIG ############
|
||||
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
|
||||
SignalSource.implementation=Flexiband_Signal_Source
|
||||
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
SignalSource.item_type=gr_complex
|
||||
|
||||
;# FPGA firmware file
|
||||
SignalSource.firmware_file=flexiband_III-1a.bit
|
||||
|
||||
;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file
|
||||
SignalSource.RF_channels=1
|
||||
|
||||
;#frontend channels gain. Not usable yet!
|
||||
SignalSource.gain1=0
|
||||
SignalSource.gain2=0
|
||||
SignalSource.gain3=0
|
||||
|
||||
;#frontend channels AGC
|
||||
SignalSource.AGC=true
|
||||
|
||||
;# USB 3.0 packet buffer size (number of SuperSpeed packets)
|
||||
SignalSource.usb_packet_buffer=128
|
||||
|
||||
;######### SIGNAL_CONDITIONER 0 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner0.implementation=Signal_Conditioner
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 0 CONFIG ############
|
||||
DataTypeAdapter0.implementation=Pass_Through
|
||||
DataTypeAdapter0.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 0 CONFIG ############
|
||||
;## Filter the input data. Can be combined with frequency translation for IF signals
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Fir_Filter] enables a FIR Filter
|
||||
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
|
||||
|
||||
InputFilter0.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter0.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter0.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
|
||||
;#the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.output_item_type=gr_complex
|
||||
|
||||
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
||||
InputFilter0.taps_item_type=float
|
||||
|
||||
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
||||
InputFilter0.number_of_taps=5
|
||||
|
||||
;#number_of _bands: Number of frequency bands in the filter.
|
||||
InputFilter0.number_of_bands=2
|
||||
|
||||
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
||||
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
||||
;#The number of band_begin and band_end elements must match the number of bands
|
||||
|
||||
InputFilter0.band1_begin=0.0
|
||||
InputFilter0.band1_end=0.45
|
||||
InputFilter0.band2_begin=0.55
|
||||
InputFilter0.band2_end=1.0
|
||||
|
||||
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
||||
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
||||
|
||||
InputFilter0.ampl1_begin=1.0
|
||||
InputFilter0.ampl1_end=1.0
|
||||
InputFilter0.ampl2_begin=0.0
|
||||
InputFilter0.ampl2_end=0.0
|
||||
|
||||
;#band_error: weighting applied to each band (usually 1).
|
||||
;#The number of band_error elements must match the number of bands
|
||||
InputFilter0.band1_error=1.0
|
||||
InputFilter0.band2_error=1.0
|
||||
|
||||
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
||||
InputFilter0.filter_type=bandpass
|
||||
|
||||
;#grid_density: determines how accurately the filter will be constructed.
|
||||
;The minimum value is 16; higher values are slower to compute the filter.
|
||||
InputFilter0.grid_density=16
|
||||
|
||||
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
|
||||
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
|
||||
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter0.sampling_frequency=20000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
InputFilter0.IF=-205000
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter0.decimation_factor=8
|
||||
|
||||
;######### RESAMPLER CONFIG 0 ############
|
||||
;## Resamples the input data.
|
||||
Resampler0.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 1 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner1.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 1 CONFIG ############
|
||||
DataTypeAdapter1.implementation=Pass_Through
|
||||
DataTypeAdapter1.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 1 CONFIG ############
|
||||
InputFilter1.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter1.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter1.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 1 ############
|
||||
;## Resamples the input data.
|
||||
Resampler1.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 2 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner2.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 2 CONFIG ############
|
||||
DataTypeAdapter2.implementation=Pass_Through
|
||||
DataTypeAdapter2.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 2 CONFIG ############
|
||||
InputFilter2.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter2.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter2.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 2 ############
|
||||
;## Resamples the input data.
|
||||
Resampler2.implementation=Pass_Through
|
||||
|
||||
;######### CHANNELS GLOBAL CONFIG ############
|
||||
;#count: Number of available GPS satellite channels.
|
||||
Channels_GPS.count=8
|
||||
;#count: Number of available Galileo satellite channels.
|
||||
Channels_Galileo.count=0
|
||||
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
|
||||
Channels.in_acquisition=1
|
||||
;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
|
||||
;#if the option is disabled by default is assigned GPS
|
||||
Channel.system=GPS
|
||||
|
||||
;# CHANNEL CONNECTION
|
||||
Channel0.RF_channel_ID=0
|
||||
Channel1.RF_channel_ID=0
|
||||
Channel2.RF_channel_ID=0
|
||||
Channel3.RF_channel_ID=0
|
||||
Channel4.RF_channel_ID=0
|
||||
Channel5.RF_channel_ID=0
|
||||
Channel6.RF_channel_ID=0
|
||||
Channel7.RF_channel_ID=0
|
||||
|
||||
;#signal:
|
||||
;#if the option is disabled by default is assigned "1C" GPS L1 C/A
|
||||
Channel.signal=1C
|
||||
|
||||
;######### SPECIFIC CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### ACQUISITION GLOBAL CONFIG ############
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition_GPS.dump=false
|
||||
;#filename: Log path and filename
|
||||
Acquisition_GPS.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition_GPS.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition_GPS.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition_GPS.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS.threshold=0.012
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS.doppler_max=10000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS.doppler_step=250
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition_GPS.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition_GPS.max_dwells=1
|
||||
|
||||
|
||||
;######### ACQUISITION CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### TRACKING GLOBAL CONFIG ############
|
||||
|
||||
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
|
||||
Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
|
||||
Tracking_GPS.item_type=gr_complex
|
||||
|
||||
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
|
||||
Tracking_GPS.if=0
|
||||
|
||||
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
|
||||
Tracking_GPS.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
|
||||
Tracking_GPS.dump_filename=./tracking_ch_
|
||||
|
||||
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.pll_bw_hz=40.0;
|
||||
|
||||
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.dll_bw_hz=3.0;
|
||||
|
||||
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.fll_bw_hz=10.0;
|
||||
|
||||
;#order: PLL/DLL loop filter order [2] or [3]
|
||||
Tracking_GPS.order=3;
|
||||
|
||||
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
|
||||
Tracking_GPS.early_late_space_chips=0.5;
|
||||
|
||||
;######### TELEMETRY DECODER GPS CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
|
||||
TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
|
||||
TelemetryDecoder_GPS.dump=false
|
||||
;#decimation factor
|
||||
TelemetryDecoder_GPS.decimation_factor=1;
|
||||
|
||||
;######### OBSERVABLES CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
|
||||
Observables.implementation=GPS_L1_CA_Observables
|
||||
|
||||
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
|
||||
Observables.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
Observables.dump_filename=./observables.dat
|
||||
|
||||
|
||||
;######### PVT CONFIG ############
|
||||
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
||||
PVT.implementation=GPS_L1_CA_PVT
|
||||
|
||||
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
||||
PVT.averaging_depth=10
|
||||
|
||||
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
||||
PVT.flag_averaging=true
|
||||
|
||||
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
|
||||
PVT.output_rate_ms=100
|
||||
|
||||
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
|
||||
PVT.display_rate_ms=500
|
||||
|
||||
;# RINEX, KML, and NMEA output configuration
|
||||
|
||||
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
|
||||
PVT.dump_filename=./PVT
|
||||
|
||||
;#nmea_dump_filename: NMEA log path and filename
|
||||
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
|
||||
|
||||
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
|
||||
PVT.flag_nmea_tty_port=false;
|
||||
|
||||
;#nmea_dump_devname: serial device descriptor for NMEA logging
|
||||
PVT.nmea_dump_devname=/dev/pts/4
|
||||
|
||||
|
||||
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
|
||||
PVT.dump=false
|
||||
|
||||
;######### OUTPUT_FILTER CONFIG ############
|
||||
;# Receiver output filter: Leave this block disabled in this version
|
||||
OutputFilter.implementation=Null_Sink_Output_Filter
|
||||
OutputFilter.filename=data/gnss-sdr.dat
|
||||
OutputFilter.item_type=gr_complex
|
343
conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf
Normal file
343
conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf
Normal file
@ -0,0 +1,343 @@
|
||||
; Default configuration file
|
||||
; You can define your own receiver and invoke it by doing
|
||||
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
|
||||
;
|
||||
|
||||
[GNSS-SDR]
|
||||
|
||||
;######### GLOBAL OPTIONS ##################
|
||||
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
||||
GNSS-SDR.internal_fs_hz=2500000
|
||||
|
||||
;######### CONTROL_THREAD CONFIG ############
|
||||
ControlThread.wait_for_flowgraph=false
|
||||
|
||||
;######### SUPL RRLP GPS assistance configuration #####
|
||||
GNSS-SDR.SUPL_gps_enabled=false
|
||||
GNSS-SDR.SUPL_read_gps_assistance_xml=true
|
||||
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
|
||||
GNSS-SDR.SUPL_gps_ephemeris_port=7275
|
||||
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
|
||||
GNSS-SDR.SUPL_gps_acquisition_port=7275
|
||||
GNSS-SDR.SUPL_MCC=244
|
||||
GNSS-SDR.SUPL_MNS=5
|
||||
GNSS-SDR.SUPL_LAC=0x59e2
|
||||
GNSS-SDR.SUPL_CI=0x31b0
|
||||
|
||||
;######### SIGNAL_SOURCE CONFIG ############
|
||||
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
|
||||
SignalSource.implementation=Flexiband_Signal_Source
|
||||
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
SignalSource.item_type=gr_complex
|
||||
|
||||
;# FPGA firmware file
|
||||
SignalSource.firmware_file=flexiband_III-1b.bit
|
||||
|
||||
;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file
|
||||
SignalSource.RF_channels=1
|
||||
|
||||
;#frontend channels gain. Not usable yet!
|
||||
SignalSource.gain1=0
|
||||
SignalSource.gain2=0
|
||||
SignalSource.gain3=0
|
||||
|
||||
;#frontend channels AGC
|
||||
SignalSource.AGC=true
|
||||
|
||||
;# USB 3.0 packet buffer size (number of SuperSpeed packets)
|
||||
SignalSource.usb_packet_buffer=128
|
||||
|
||||
;######### SIGNAL_CONDITIONER 0 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner0.implementation=Signal_Conditioner
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 0 CONFIG ############
|
||||
DataTypeAdapter0.implementation=Pass_Through
|
||||
DataTypeAdapter0.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 0 CONFIG ############
|
||||
;## Filter the input data. Can be combined with frequency translation for IF signals
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Fir_Filter] enables a FIR Filter
|
||||
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
|
||||
|
||||
InputFilter0.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter0.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter0.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
|
||||
;#the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.output_item_type=gr_complex
|
||||
|
||||
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
||||
InputFilter0.taps_item_type=float
|
||||
|
||||
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
||||
InputFilter0.number_of_taps=5
|
||||
|
||||
;#number_of _bands: Number of frequency bands in the filter.
|
||||
InputFilter0.number_of_bands=2
|
||||
|
||||
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
||||
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
||||
;#The number of band_begin and band_end elements must match the number of bands
|
||||
|
||||
InputFilter0.band1_begin=0.0
|
||||
InputFilter0.band1_end=0.45
|
||||
InputFilter0.band2_begin=0.55
|
||||
InputFilter0.band2_end=1.0
|
||||
|
||||
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
||||
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
||||
|
||||
InputFilter0.ampl1_begin=1.0
|
||||
InputFilter0.ampl1_end=1.0
|
||||
InputFilter0.ampl2_begin=0.0
|
||||
InputFilter0.ampl2_end=0.0
|
||||
|
||||
;#band_error: weighting applied to each band (usually 1).
|
||||
;#The number of band_error elements must match the number of bands
|
||||
InputFilter0.band1_error=1.0
|
||||
InputFilter0.band2_error=1.0
|
||||
|
||||
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
||||
InputFilter0.filter_type=bandpass
|
||||
|
||||
;#grid_density: determines how accurately the filter will be constructed.
|
||||
;The minimum value is 16; higher values are slower to compute the filter.
|
||||
InputFilter0.grid_density=16
|
||||
|
||||
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
|
||||
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
|
||||
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter0.sampling_frequency=20000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
InputFilter0.IF=-205000
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter0.decimation_factor=8
|
||||
|
||||
;######### RESAMPLER CONFIG 0 ############
|
||||
;## Resamples the input data.
|
||||
Resampler0.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 1 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner1.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 1 CONFIG ############
|
||||
DataTypeAdapter1.implementation=Pass_Through
|
||||
DataTypeAdapter1.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 1 CONFIG ############
|
||||
InputFilter1.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter1.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter1.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 1 ############
|
||||
;## Resamples the input data.
|
||||
Resampler1.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 2 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner2.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 2 CONFIG ############
|
||||
DataTypeAdapter2.implementation=Pass_Through
|
||||
DataTypeAdapter2.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 2 CONFIG ############
|
||||
InputFilter2.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter2.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter2.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 2 ############
|
||||
;## Resamples the input data.
|
||||
Resampler2.implementation=Pass_Through
|
||||
|
||||
;######### CHANNELS GLOBAL CONFIG ############
|
||||
;#count: Number of available GPS satellite channels.
|
||||
Channels_GPS.count=8
|
||||
;#count: Number of available Galileo satellite channels.
|
||||
Channels_Galileo.count=0
|
||||
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
|
||||
Channels.in_acquisition=1
|
||||
;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
|
||||
;#if the option is disabled by default is assigned GPS
|
||||
Channel.system=GPS
|
||||
|
||||
;# CHANNEL CONNECTION
|
||||
Channel0.RF_channel_ID=0
|
||||
Channel1.RF_channel_ID=0
|
||||
Channel2.RF_channel_ID=0
|
||||
Channel3.RF_channel_ID=0
|
||||
Channel4.RF_channel_ID=0
|
||||
Channel5.RF_channel_ID=0
|
||||
Channel6.RF_channel_ID=0
|
||||
Channel7.RF_channel_ID=0
|
||||
|
||||
;#signal:
|
||||
;#if the option is disabled by default is assigned "1C" GPS L1 C/A
|
||||
Channel.signal=1C
|
||||
|
||||
;######### SPECIFIC CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### ACQUISITION GLOBAL CONFIG ############
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition_GPS.dump=false
|
||||
;#filename: Log path and filename
|
||||
Acquisition_GPS.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition_GPS.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition_GPS.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition_GPS.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS.threshold=0.012
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS.doppler_max=10000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS.doppler_step=250
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition_GPS.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition_GPS.max_dwells=1
|
||||
|
||||
|
||||
;######### ACQUISITION CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### TRACKING GLOBAL CONFIG ############
|
||||
|
||||
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
|
||||
Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
|
||||
Tracking_GPS.item_type=gr_complex
|
||||
|
||||
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
|
||||
Tracking_GPS.if=0
|
||||
|
||||
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
|
||||
Tracking_GPS.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
|
||||
Tracking_GPS.dump_filename=./tracking_ch_
|
||||
|
||||
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.pll_bw_hz=40.0;
|
||||
|
||||
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.dll_bw_hz=3.0;
|
||||
|
||||
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.fll_bw_hz=10.0;
|
||||
|
||||
;#order: PLL/DLL loop filter order [2] or [3]
|
||||
Tracking_GPS.order=3;
|
||||
|
||||
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
|
||||
Tracking_GPS.early_late_space_chips=0.5;
|
||||
|
||||
;######### TELEMETRY DECODER GPS CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
|
||||
TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
|
||||
TelemetryDecoder_GPS.dump=false
|
||||
;#decimation factor
|
||||
TelemetryDecoder_GPS.decimation_factor=1;
|
||||
|
||||
;######### OBSERVABLES CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
|
||||
Observables.implementation=GPS_L1_CA_Observables
|
||||
|
||||
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
|
||||
Observables.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
Observables.dump_filename=./observables.dat
|
||||
|
||||
|
||||
;######### PVT CONFIG ############
|
||||
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
||||
PVT.implementation=GPS_L1_CA_PVT
|
||||
|
||||
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
||||
PVT.averaging_depth=10
|
||||
|
||||
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
||||
PVT.flag_averaging=true
|
||||
|
||||
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
|
||||
PVT.output_rate_ms=100
|
||||
|
||||
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
|
||||
PVT.display_rate_ms=500
|
||||
|
||||
;# RINEX, KML, and NMEA output configuration
|
||||
|
||||
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
|
||||
PVT.dump_filename=./PVT
|
||||
|
||||
;#nmea_dump_filename: NMEA log path and filename
|
||||
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
|
||||
|
||||
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
|
||||
PVT.flag_nmea_tty_port=false;
|
||||
|
||||
;#nmea_dump_devname: serial device descriptor for NMEA logging
|
||||
PVT.nmea_dump_devname=/dev/pts/4
|
||||
|
||||
|
||||
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
|
||||
PVT.dump=false
|
||||
|
||||
;######### OUTPUT_FILTER CONFIG ############
|
||||
;# Receiver output filter: Leave this block disabled in this version
|
||||
OutputFilter.implementation=Null_Sink_Output_Filter
|
||||
OutputFilter.filename=data/gnss-sdr.dat
|
||||
OutputFilter.item_type=gr_complex
|
343
conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf
Normal file
343
conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf
Normal file
@ -0,0 +1,343 @@
|
||||
; Default configuration file
|
||||
; You can define your own receiver and invoke it by doing
|
||||
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
|
||||
;
|
||||
|
||||
[GNSS-SDR]
|
||||
|
||||
;######### GLOBAL OPTIONS ##################
|
||||
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
||||
GNSS-SDR.internal_fs_hz=2500000
|
||||
|
||||
;######### CONTROL_THREAD CONFIG ############
|
||||
ControlThread.wait_for_flowgraph=false
|
||||
|
||||
;######### SUPL RRLP GPS assistance configuration #####
|
||||
GNSS-SDR.SUPL_gps_enabled=false
|
||||
GNSS-SDR.SUPL_read_gps_assistance_xml=true
|
||||
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
|
||||
GNSS-SDR.SUPL_gps_ephemeris_port=7275
|
||||
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
|
||||
GNSS-SDR.SUPL_gps_acquisition_port=7275
|
||||
GNSS-SDR.SUPL_MCC=244
|
||||
GNSS-SDR.SUPL_MNS=5
|
||||
GNSS-SDR.SUPL_LAC=0x59e2
|
||||
GNSS-SDR.SUPL_CI=0x31b0
|
||||
|
||||
;######### SIGNAL_SOURCE CONFIG ############
|
||||
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
|
||||
SignalSource.implementation=Flexiband_Signal_Source
|
||||
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
SignalSource.item_type=gr_complex
|
||||
|
||||
;# FPGA firmware file
|
||||
SignalSource.firmware_file=flexiband_II-3b.bit
|
||||
|
||||
;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file
|
||||
SignalSource.RF_channels=1
|
||||
|
||||
;#frontend channels gain. Not usable yet!
|
||||
SignalSource.gain1=0
|
||||
SignalSource.gain2=0
|
||||
SignalSource.gain3=0
|
||||
|
||||
;#frontend channels AGC
|
||||
SignalSource.AGC=true
|
||||
|
||||
;# USB 3.0 packet buffer size (number of SuperSpeed packets)
|
||||
SignalSource.usb_packet_buffer=128
|
||||
|
||||
;######### SIGNAL_CONDITIONER 0 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner0.implementation=Signal_Conditioner
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 0 CONFIG ############
|
||||
DataTypeAdapter0.implementation=Pass_Through
|
||||
DataTypeAdapter0.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 0 CONFIG ############
|
||||
;## Filter the input data. Can be combined with frequency translation for IF signals
|
||||
|
||||
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
|
||||
;#[Pass_Through] disables this block
|
||||
;#[Fir_Filter] enables a FIR Filter
|
||||
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
|
||||
|
||||
InputFilter0.implementation=Freq_Xlating_Fir_Filter
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter0.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter0.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
|
||||
;#the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.output_item_type=gr_complex
|
||||
|
||||
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
||||
InputFilter0.taps_item_type=float
|
||||
|
||||
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
||||
InputFilter0.number_of_taps=5
|
||||
|
||||
;#number_of _bands: Number of frequency bands in the filter.
|
||||
InputFilter0.number_of_bands=2
|
||||
|
||||
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
||||
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
||||
;#The number of band_begin and band_end elements must match the number of bands
|
||||
|
||||
InputFilter0.band1_begin=0.0
|
||||
InputFilter0.band1_end=0.45
|
||||
InputFilter0.band2_begin=0.55
|
||||
InputFilter0.band2_end=1.0
|
||||
|
||||
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
||||
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
||||
|
||||
InputFilter0.ampl1_begin=1.0
|
||||
InputFilter0.ampl1_end=1.0
|
||||
InputFilter0.ampl2_begin=0.0
|
||||
InputFilter0.ampl2_end=0.0
|
||||
|
||||
;#band_error: weighting applied to each band (usually 1).
|
||||
;#The number of band_error elements must match the number of bands
|
||||
InputFilter0.band1_error=1.0
|
||||
InputFilter0.band2_error=1.0
|
||||
|
||||
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
||||
InputFilter0.filter_type=bandpass
|
||||
|
||||
;#grid_density: determines how accurately the filter will be constructed.
|
||||
;The minimum value is 16; higher values are slower to compute the filter.
|
||||
InputFilter0.grid_density=16
|
||||
|
||||
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
|
||||
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
|
||||
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter0.sampling_frequency=40000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
InputFilter0.IF=-205000
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter0.decimation_factor=16
|
||||
|
||||
;######### RESAMPLER CONFIG 0 ############
|
||||
;## Resamples the input data.
|
||||
Resampler0.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 1 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner1.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 1 CONFIG ############
|
||||
DataTypeAdapter1.implementation=Pass_Through
|
||||
DataTypeAdapter1.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 1 CONFIG ############
|
||||
InputFilter1.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter1.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter1.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter1.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 1 ############
|
||||
;## Resamples the input data.
|
||||
Resampler1.implementation=Pass_Through
|
||||
|
||||
;######### SIGNAL_CONDITIONER 2 CONFIG ############
|
||||
;## It holds blocks to change data type, filter and resample input data.
|
||||
SignalConditioner2.implementation=Pass_Through
|
||||
|
||||
;######### DATA_TYPE_ADAPTER 2 CONFIG ############
|
||||
DataTypeAdapter2.implementation=Pass_Through
|
||||
DataTypeAdapter2.item_type=gr_complex
|
||||
|
||||
;######### INPUT_FILTER 2 CONFIG ############
|
||||
InputFilter2.implementation=Pass_Through
|
||||
|
||||
;#dump: Dump the filtered data to a file.
|
||||
InputFilter2.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
InputFilter2.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.input_item_type=gr_complex
|
||||
|
||||
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
||||
InputFilter2.output_item_type=gr_complex
|
||||
|
||||
;######### RESAMPLER CONFIG 2 ############
|
||||
;## Resamples the input data.
|
||||
Resampler2.implementation=Pass_Through
|
||||
|
||||
;######### CHANNELS GLOBAL CONFIG ############
|
||||
;#count: Number of available GPS satellite channels.
|
||||
Channels_GPS.count=8
|
||||
;#count: Number of available Galileo satellite channels.
|
||||
Channels_Galileo.count=0
|
||||
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
|
||||
Channels.in_acquisition=1
|
||||
;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
|
||||
;#if the option is disabled by default is assigned GPS
|
||||
Channel.system=GPS
|
||||
|
||||
;# CHANNEL CONNECTION
|
||||
Channel0.RF_channel_ID=0
|
||||
Channel1.RF_channel_ID=0
|
||||
Channel2.RF_channel_ID=0
|
||||
Channel3.RF_channel_ID=0
|
||||
Channel4.RF_channel_ID=0
|
||||
Channel5.RF_channel_ID=0
|
||||
Channel6.RF_channel_ID=0
|
||||
Channel7.RF_channel_ID=0
|
||||
|
||||
;#signal:
|
||||
;#if the option is disabled by default is assigned "1C" GPS L1 C/A
|
||||
Channel.signal=1C
|
||||
|
||||
;######### SPECIFIC CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### ACQUISITION GLOBAL CONFIG ############
|
||||
|
||||
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
||||
Acquisition_GPS.dump=false
|
||||
;#filename: Log path and filename
|
||||
Acquisition_GPS.dump_filename=./acq_dump.dat
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
||||
Acquisition_GPS.item_type=gr_complex
|
||||
;#if: Signal intermediate frequency in [Hz]
|
||||
Acquisition_GPS.if=0
|
||||
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
||||
Acquisition_GPS.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS.threshold=0.012
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS.doppler_max=10000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS.doppler_step=250
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
Acquisition_GPS.bit_transition_flag=false
|
||||
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
|
||||
Acquisition_GPS.max_dwells=1
|
||||
|
||||
|
||||
;######### ACQUISITION CHANNELS CONFIG ######
|
||||
;#The following options are specific to each channel and overwrite the generic options
|
||||
|
||||
|
||||
;######### TRACKING GLOBAL CONFIG ############
|
||||
|
||||
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
|
||||
Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
|
||||
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
|
||||
Tracking_GPS.item_type=gr_complex
|
||||
|
||||
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
|
||||
Tracking_GPS.if=0
|
||||
|
||||
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
|
||||
Tracking_GPS.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
|
||||
Tracking_GPS.dump_filename=./tracking_ch_
|
||||
|
||||
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.pll_bw_hz=40.0;
|
||||
|
||||
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.dll_bw_hz=3.0;
|
||||
|
||||
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.fll_bw_hz=10.0;
|
||||
|
||||
;#order: PLL/DLL loop filter order [2] or [3]
|
||||
Tracking_GPS.order=3;
|
||||
|
||||
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
|
||||
Tracking_GPS.early_late_space_chips=0.5;
|
||||
|
||||
;######### TELEMETRY DECODER GPS CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
|
||||
TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
|
||||
TelemetryDecoder_GPS.dump=false
|
||||
;#decimation factor
|
||||
TelemetryDecoder_GPS.decimation_factor=1;
|
||||
|
||||
;######### OBSERVABLES CONFIG ############
|
||||
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
|
||||
Observables.implementation=GPS_L1_CA_Observables
|
||||
|
||||
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
|
||||
Observables.dump=false
|
||||
|
||||
;#dump_filename: Log path and filename.
|
||||
Observables.dump_filename=./observables.dat
|
||||
|
||||
|
||||
;######### PVT CONFIG ############
|
||||
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
||||
PVT.implementation=GPS_L1_CA_PVT
|
||||
|
||||
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
||||
PVT.averaging_depth=10
|
||||
|
||||
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
||||
PVT.flag_averaging=true
|
||||
|
||||
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
|
||||
PVT.output_rate_ms=100
|
||||
|
||||
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
|
||||
PVT.display_rate_ms=500
|
||||
|
||||
;# RINEX, KML, and NMEA output configuration
|
||||
|
||||
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
|
||||
PVT.dump_filename=./PVT
|
||||
|
||||
;#nmea_dump_filename: NMEA log path and filename
|
||||
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
|
||||
|
||||
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
|
||||
PVT.flag_nmea_tty_port=false;
|
||||
|
||||
;#nmea_dump_devname: serial device descriptor for NMEA logging
|
||||
PVT.nmea_dump_devname=/dev/pts/4
|
||||
|
||||
|
||||
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
|
||||
PVT.dump=false
|
||||
|
||||
;######### OUTPUT_FILTER CONFIG ############
|
||||
;# Receiver output filter: Leave this block disabled in this version
|
||||
OutputFilter.implementation=Null_Sink_Output_Filter
|
||||
OutputFilter.filename=data/gnss-sdr.dat
|
||||
OutputFilter.item_type=gr_complex
|
@ -7,7 +7,7 @@
|
||||
|
||||
;######### GLOBAL OPTIONS ##################
|
||||
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
||||
GNSS-SDR.internal_fs_hz=2000000
|
||||
GNSS-SDR.internal_fs_hz=5000000
|
||||
|
||||
;######### CONTROL_THREAD CONFIG ############
|
||||
ControlThread.wait_for_flowgraph=false
|
||||
@ -74,7 +74,8 @@ InputFilter0.dump_filename=../data/input_filter.dat
|
||||
|
||||
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
|
||||
;#These options are based on parameters of gnuradio's function: gr_remez.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges, the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
|
||||
;#the desired reponse on those bands, and the weight given to the error in those bands.
|
||||
|
||||
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
||||
InputFilter0.input_item_type=gr_complex
|
||||
@ -126,10 +127,10 @@ InputFilter0.grid_density=16
|
||||
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
||||
InputFilter0.sampling_frequency=40000000
|
||||
;# IF deviation due to front-end LO inaccuracies [HZ]
|
||||
InputFilter0.IF=205000
|
||||
InputFilter0.IF=-205000
|
||||
|
||||
;# Decimation factor after the frequency tranaslating block
|
||||
InputFilter0.decimation_factor=20
|
||||
InputFilter0.decimation_factor=8
|
||||
|
||||
;######### RESAMPLER CONFIG 0 ############
|
||||
;## Resamples the input data.
|
||||
@ -191,7 +192,7 @@ Resampler2.implementation=Pass_Through
|
||||
|
||||
;######### CHANNELS GLOBAL CONFIG ############
|
||||
;#count: Number of available GPS satellite channels.
|
||||
Channels_GPS.count=1
|
||||
Channels_GPS.count=4
|
||||
;#count: Number of available Galileo satellite channels.
|
||||
Channels_Galileo.count=0
|
||||
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
|
||||
@ -233,13 +234,13 @@ Acquisition_GPS.coherent_integration_time_ms=1
|
||||
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
|
||||
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
|
||||
Acquisition_GPS.threshold=0.007
|
||||
Acquisition_GPS.threshold=0.011
|
||||
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
||||
;Acquisition_GPS.pfa=0.0001
|
||||
;#doppler_max: Maximum expected Doppler shift [Hz]
|
||||
Acquisition_GPS.doppler_max=10000
|
||||
;#doppler_max: Doppler step in the grid search [Hz]
|
||||
Acquisition_GPS.doppler_step=500
|
||||
Acquisition_GPS.doppler_step=250
|
||||
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
|
||||
;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
|
||||
;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
|
||||
@ -269,10 +270,10 @@ Tracking_GPS.dump=false
|
||||
Tracking_GPS.dump_filename=./tracking_ch_
|
||||
|
||||
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.pll_bw_hz=50.0;
|
||||
Tracking_GPS.pll_bw_hz=40.0;
|
||||
|
||||
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.dll_bw_hz=2.0;
|
||||
Tracking_GPS.dll_bw_hz=3.0;
|
||||
|
||||
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
||||
Tracking_GPS.fll_bw_hz=10.0;
|
Loading…
Reference in New Issue
Block a user