mirrors/gnss-sdr
1
0
Fork 0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-12-14 20:20:35 +00:00
Code Issues Releases Wiki Activity

Document signal and system flags

Browse Source
This commit is contained in:
Carles Fernandez 2020-03-05 09:58:12 +01:00
parent 2e23ba3489
commit aaa17fc218
1 changed files with 5 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
src/utils/rinex-tools/README.md
View File

@ -132,9 +132,11 @@ Available command-line flags:
| `--compare_with_5X` | `false` | [`true`, `false`]: If `true`, the program compares the E5a Doppler and Carrier Phases with the E5 full Bw in RINEX (expect discrepancy due to the center frequencies difference). |
| `--dupli_sat` | `false` | [`true`, `false`]: If `true`, this flag enables special observable test mode where the scenario contains duplicated satellite orbits. |
| `--dupli_sat_prns` | `1,2,3,4` | List of duplicated satellites PRN pairs (_i.e._, `1,2,3,4` indicates that the PRNs 1,2 share the same orbit. The same applies for PRNs 3,4). |
| `--base_rinex_obs` | `base.obs` | Filename of reference RINEX observation file. |
| `--rover_rinex_obs` | `rover.obs` | Filename of tested RINEX observation file. |
| `--base_rinex_obs` | `base.obs` | Filename of reference RINEX observation file. |
| `--rover_rinex_obs` | `rover.obs` | Filename of tested RINEX observation file. |
| `--remove_rx_clock_error` | `false` | Compute and remove the receivers clock error prior to compute observable differences (requires a valid RINEX nav file for both receivers) |
| `--rinex_nav` | `base.nav` | Filename of reference RINEX navigation file. Only needed if `remove_rx_clock_error` is set to `true`. |
| `--rinex_nav` | `base.nav` | Filename of reference RINEX navigation file. Only needed if `remove_rx_clock_error` is set to `true`. |
| `--system` | `G` | GNSS satellite system: `G` for GPS, `E` for Galileo. |
| `--signal` | `1C` | GNSS signal: `1C` for GPS L1 CA, `1B` for Galileo E1. |
| `--show_plots` | `true` | [`true`, `false`]: If `true`, and if [gnuplot](http://www.gnuplot.info/) is found on the system, displays results plots on screen. Please set it to `false` for non-interactive testing. |
<!-- prettier-ignore-end -->