updating configuration

conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf

@@ -13,12 +13,12 @@ GNSS-SDR.internal_fs_hz=4000000
 ControlThread.wait_for_flowgraph=false
 
 ;######### SUPL RRLP GPS assistance configuration #####
-GNSS-SDR.SUPL_gps_enabled=false
+GNSS-SDR.SUPL_1C_enabled=false
-GNSS-SDR.SUPL_read_gps_assistance_xml=true
+GNSS-SDR.SUPL_read_1C_assistance_xml=true
-GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
+GNSS-SDR.SUPL_1C_ephemeris_server=supl.nokia.com
-GNSS-SDR.SUPL_gps_ephemeris_port=7275
+GNSS-SDR.SUPL_1C_ephemeris_port=7275
-GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
+GNSS-SDR.SUPL_1C_acquisition_server=supl.google.com
-GNSS-SDR.SUPL_gps_acquisition_port=7275
+GNSS-SDR.SUPL_1C_acquisition_port=7275
 GNSS-SDR.SUPL_MCC=244
 GNSS-SDR.SUPL_MNS=5
 GNSS-SDR.SUPL_LAC=0x59e2
@@ -29,7 +29,7 @@ GNSS-SDR.SUPL_CI=0x31b0
 SignalSource.implementation=UHD_Signal_Source
 
 ;#When left empty, the device discovery routines will search all vailable transports on the system (ethernet, usb...)
-SignalSource.device_address=192.168.50.2
+SignalSource.device_address=192.168.40.2
 
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
 SignalSource.item_type=gr_complex
@@ -50,7 +50,7 @@ SignalSource.subdevice=A:0 B:0
 SignalSource.freq0=1575420000
 
 ;#gain: Front-end Gain in [dB] 
-SignalSource.gain0=40
+SignalSource.gain0=50
 
 ;#samples: Number of samples to be processed. Notice that 0 indicates no limit
 SignalSource.samples0=0
@@ -65,7 +65,7 @@ SignalSource.dump_filename0=../data/signal_source0.dat
 SignalSource.freq1=1575420000
 
 ;#gain: Front-end Gain in [dB] 
-SignalSource.gain1=40
+SignalSource.gain1=50
 
 ;#samples: Number of samples to be processed. Notice that 0 indicates no limit
 SignalSource.samples1=0
@@ -269,22 +269,28 @@ Resampler1.implementation=Pass_Through
 
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available GPS satellite channels.
-Channels_GPS.count=2
+Channels_1C.count=4
 ;#count: Number of available Galileo satellite channels.
 Channels_Galileo.count=0
 ;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
 Channels.in_acquisition=1
 ;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
 ;#if the option is disabled by default is assigned GPS
-Channel.system=GPS
+;Channel.system=GPS
 
 ;# CHANNEL CONNECTION
 Channel0.RF_channel_ID=0
 Channel1.RF_channel_ID=1
+Channel2.RF_channel_ID=0
+Channel3.RF_channel_ID=1
+
 
 ;#signal: 
 ;#if the option is disabled by default is assigned "1C" GPS L1 C/A
-Channel.signal=1C
+Channel0.signal=1C
+Channel1.signal=1C
+Channel2.signal=1C
+Channel3.signal=1C
 
 ;######### SPECIFIC CHANNELS CONFIG ######
 ;#The following options are specific to each channel and overwrite the generic options 
@@ -293,31 +299,31 @@ Channel.signal=1C
 ;######### ACQUISITION GLOBAL CONFIG ############
 
 ;#dump: Enable or disable the acquisition internal data file logging [true] or [false] 
-Acquisition_GPS.dump=false
+Acquisition_1C.dump=false
 ;#filename: Log path and filename
-Acquisition_GPS.dump_filename=./acq_dump.dat
+Acquisition_1C.dump_filename=./acq_dump.dat
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_GPS.item_type=gr_complex
+Acquisition_1C.item_type=gr_complex
 ;#if: Signal intermediate frequency in [Hz] 
-Acquisition_GPS.if=0
+Acquisition_1C.if=0
 ;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_GPS.coherent_integration_time_ms=1
+Acquisition_1C.coherent_integration_time_ms=1
 ;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
 ;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
-Acquisition_GPS.threshold=0.02
+Acquisition_1C.threshold=0.01
 ;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-;Acquisition_GPS.pfa=0.0001
+;Acquisition_1C.pfa=0.01
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_max=8000
+Acquisition_1C.doppler_max=8000
 ;#doppler_max: Doppler step in the grid search [Hz]
-Acquisition_GPS.doppler_step=500
+Acquisition_1C.doppler_step=500
 ;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
 ;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] 
 ;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
-Acquisition_GPS.bit_transition_flag=false
+Acquisition_1C.bit_transition_flag=false
 ;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
-Acquisition_GPS.max_dwells=1
+Acquisition_1C.max_dwells=1
 
 
 ;######### ACQUISITION CHANNELS CONFIG ######
@@ -327,40 +333,40 @@ Acquisition_GPS.max_dwells=1
 ;######### TRACKING GLOBAL CONFIG ############
 
 ;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
-Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Optim_Tracking
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
 ;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
-Tracking_GPS.item_type=gr_complex
+Tracking_1C.item_type=gr_complex
 
 ;#sampling_frequency: Signal Intermediate Frequency in [Hz] 
-Tracking_GPS.if=0
+Tracking_1C.if=0
 
 ;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] 
-Tracking_GPS.dump=false
+Tracking_1C.dump=false
 
 ;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_GPS.dump_filename=./tracking_ch_
+Tracking_1C.dump_filename=./tracking_ch_
 
 ;#pll_bw_hz: PLL loop filter bandwidth [Hz]
-Tracking_GPS.pll_bw_hz=50.0;
+Tracking_1C.pll_bw_hz=40.0;
 
 ;#dll_bw_hz: DLL loop filter bandwidth [Hz]
-Tracking_GPS.dll_bw_hz=2.0;
+Tracking_1C.dll_bw_hz=4.0;
 
 ;#fll_bw_hz: FLL loop filter bandwidth [Hz]
-Tracking_GPS.fll_bw_hz=10.0;
+Tracking_1C.fll_bw_hz=10.0;
 
 ;#order: PLL/DLL loop filter order [2] or [3]
-Tracking_GPS.order=3;
+Tracking_1C.order=3;
 
 ;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
-Tracking_GPS.early_late_space_chips=0.5;
+Tracking_1C.early_late_space_chips=0.5;
 
 ;######### TELEMETRY DECODER GPS CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
-TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_GPS.dump=false
+TelemetryDecoder_1C.dump=false
 ;#decimation factor
-TelemetryDecoder_GPS.decimation_factor=1;
+TelemetryDecoder_1C.decimation_factor=1;
 
 ;######### OBSERVABLES CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.