This feels a little overkill, but nice to standardise how this code
looks.
There's a bit of me which wonders if we should remove
IPeripheral.equals, and just use Object.equals, but I do also kinda like
the explicitness of the current interface? IDK.
This ensures the client decoder is in sync with the server. Well, mostly
- we don't handle the anti-jerk, but that should correct itself within a
few samples.
Fixes#1748
This adds support for computer selectors, in the style of entity
selectors. The long-term goal here is to replace our existing ad-hoc
selectors. However, to aid migration, we currently support both - the
previous one will most likely be removed in MC 1.21.
Computer selectors take the form @c[<key>=<value>,...]. Currently we
support filtering by id, instance id, label, family (as before) and
distance from the player (new!). The code also supports computers within
a bounding box, but there's no parsing support for that yet.
This commit also (finally) documents the /computercraft command. Well,
sort of - it's definitely not my best word, but I couldn't find better
words.
When rendering non-origin monitors, we would fetch the origin monitor,
read its client state, and then cache that on the current monitor to
avoid repeated lookups.
However, if the origin monitor is unloaded/removed on the client, and
then loaded agin, this cache will be not be invalidated, causing us to
render both the old and new monitor!
I think the correct thing to do here is cache the origin monitor. This
allows us to check when the origin monitor has been removed, and
invalidate the cache if needed.
However, I'm wary of any other edge cases here, so for now we do
something much simpler, and remove the cache entirely. This does mean
that monitors now need to perform extra block entity lookups, but the
performance cost doesn't appear to be too bad.
Fixes#1741
Historically, computers tracked whether any world-visible state
(on/off/blinking, label and redstone outputs) had changed with a single
"has changed" flag. While this is simple to use, this has the curious
side effect of that term.setCursorBlink() or os.setComputerLabel() would
cause a block update!
This isn't really a problem in practice - it just means slightly more
block updates. However, the redstone propagation sometimes causes the
computer to invalidate/recheck peripherals, which masks several other
(yet unfixed) bugs.
Minecraft sometimes keeps chunks in-memory, but not actively loaded. If
we schedule a block entity to be ticked and that chunk is is then
transitioned to this partially-loaded state, then the block entity is
never actually ticked.
This is most visible with monitors. When a monitor's contents changes,
if the monitor is not already marked as changed, we set it as changed
and schedule a tick (see ServerMonitor). However, if the tick is
dropped, we don't clear the changed flag, meaning subsequent changes
don't requeue the monitor to be ticked, and so the monitor is never
updated.
We fix this by maintaining a list of block entities whose tick was
dropped. If these block entities (or rather their owning chunk) is ever
re-loaded, then we reschedule them to be ticked.
An alternative approach here would be to add the scheduled tick directly
to the LevelChunk. However, getting hold of the LevelChunk for unloaded
blocks is quiet nasty, so I think best avoided.
Fixes#1146. Fixes#1560 - I believe the second one is a duplicate, and
I noticed too late :D.
When we remove a wired node from a network, we need to find connected
components in the rest of the graph. Typically, this requires a
traversal of the whole graph, taking O(|V| + |E|) time.
If we remove a lot of nodes at once (such as when unloading chunks),
this ends up being quadratic in the number of nodes. In some test
networks, this can take anywhere from a few seconds, to hanging the game
indefinitely.
This attempts to reduce the cases where this can happen, with a couple
of optimisations:
- Instead of constructing a new hash set of reachable nodes (requiring
multiple allocations and hash lookups), we store reachability as a
temporary field on the WiredNode.
- We abort our traversal of the graph if we can prove the graph remains
connected after removing the node.
There's definitely future work to be done here in optimising large wired
networks, but this is a good first step.
- Replace usages of WiredNetwork.connect/disconnect/remove with the
WiredNode equivalents.
- Convert "testLarge" into a proper JMH benchmark.
- Don't put a peripheral on every node in the benchmarks. This isn't
entirely representative, and means the peripheral juggling code ends
up dominating the benchmark time.
Forge doesn't run client-side commands from sendUnsignedCommand, so we
still require a mixin there.
We do need to change the command name, as Fabric doesn't properly merge
the two command trees.
I didn't make a new years resolution to stop writing build tooling, but
maybe I should have.
This replaces our use of VanillaGradle with a new project,
VanillaExtract. This offers a couple of useful features for multi-loader
dev, including Parchment and Unpick support, both of which we now use in
CC:T.
This was copied over from the old binary handle, and so states we
always return a single number if no count is given. This is only the
case when the file is opened in binary mode.
Rather than mixing-in to CachedOutput, we just wrap our DataProviders to
use a custom CachedOutput which reformats the JSON before writing. This
allows us to drop mixins for common+non-client code.
Disk drives have had a long-standing issue with mutating their contents
on the computer thread, potentially leading to all sorts of odd bugs.
We tried to fix this by moving setDiskLabel and the mounting code to run
on the main thread. Unfortunately, this means there is a slight delay to
mounts being attached, breaking disk startup.
This commit implements an alternative solution - we now do mounting on
the computer thread again. If the disk's stack is modified, we update it
in the peripheral-facing item, but not the actual inventory. The next
time the disk drive is ticked, we then sync the two items.
This does mean that there is a fraction of a tick where the two will be
out-of-sync. This isn't ideal - it would potentially be possible to
cycle through disk ids - but I don't really think that's avoidable
without significantly complicating the IMedia API.
Fixes#1649, fixes#1686.
Originally we exposed a single registerTurtleUpgradeModellermethod which
could be called from both Fabric (during a mod's client init) and Forge
(during FMLClientSetupEvent).
This was fine until we allowed upgrades to specify model dependencies,
which would then automatically loaded, as this means model loading now
depends on upgrade modellers being loaded. Unknown to me, this is not
guaranteed to be the case on Forge - mod setup happens at the same time
as resource reloading!
Unfortunately there's not really a salvageable way of fixing this with
the current API. Forge now uses a registration event-based system,
meaning we can guarantee all modellers are loaded before models are
baked.
- Add support for version overrides/exclusions in our dependency check.
Sometimes mod loaders use different versions to vanilla, and we need
some way to handle that.
- Rescan wired network connections on the tick after invalidation,
rather than when invalidated.
- Convert some constant lambdas to static method references. Lambdas
don't allocate if they don't capture variables, so this has the same
performance and is a little less ugly.
- Small code-style/formatting changes.
Historically we used Forge's SimpleChannel methods (and
PacketDistributor) to send the packets to the client. However, we don't
need to do that - it is sufficient to convert it to a vanilla packet,
and send the packet ourselves.
Given we need to do this on Fabric, it makes sense to do this on Forge
as well. This allows us to unify (and thus simplify) a lot of how packet
sending works.
At the same time, we also remove the handling of speaker audio during
decoding. We originally did this to avoid the additional copy of audio
data. However, this doesn't work on 1.20.4 (as packets aren't
encoded/decoded on singleplayer), so it makes sense to do this
Correctly(TM).
This also allows us to get rid of ClientNetworkContext.get(). We do
still need to service load this class (as Forge's networking isn't split
up in the same way Fabric's is), but we'll be able to drop that in
1.20.4.
Finally, we move the record playing code from ClientNetworkContext to
ClientPlatformHelper. This means the network context no longer needs to
be platform-specific!
After embarrassing, let's do some proper work.
Rather than passing the level and position each time we call
ComponentAccess.get(), we now pass them at construction time (in the
form of the BE). This makes the consuming code a little cleaner, and is
required for the NeoForge changes in 1.20.4.
Everything old is new again!
CC's network message implementation has gone through several iterations:
- Originally network messages were implemented with a single class,
which held an packet id/type and and opaque blobs of data (as
string/int/byte/NBT arrays), and a big switch statement to decode and
process this data.
- In 42d3901ee3, we split the messages
into different classes all inheriting from NetworkMessage - this bit
we've stuck with ever since.
Each packet had a `getId(): int` method, which returned the
discriminator for this packet.
- However, getId() was only used when registering the packet, not when
sending, and so in ce0685c31f we
removed it, just passing in a constant integer at registration
instead.
- In 53abe5e56e, we made some relatively
minor changes to make the code more multi-loader/split-source
friendly. However, this meant when we finally came to add Fabric
support (8152f19b6e), we had to
re-implement a lot of Forge's network code.
In 1.20.4, Forge moves to a system much closer to Fabric's (and indeed,
Minecraft's own CustomPacketPayload), and so it makes sense to adapt to
that now. As such, we:
- Add a new MessageType interface. This is implemented by the
loader-specific modules, and holds whatever information is needed to
register the packet (e.g. discriminator, reader function).
- Each NetworkMessage now has a type(): MessageType<?> function. This
is used by the Fabric networking code (and for NeoForge's on 1.20.4)
instead of a class lookup.
- NetworkMessages now creates/stores these MessageType<T>s (much like
we'd do for registries), and provides getters for the
clientbound/serverbound messages. Mod initialisers then call these
getters to register packets.
- For Forge, this is relatively unchanged. For Fabric, we now
`FabricPacket`s.
While ComputerFamily is still useful, there's definitely some places
where it adds an extra layer of indirection. This commit attempts to
clean up some places where we no longer need it.
- Remove ComputerFamily from AbstractComputerBlock. The only place this
was needed is in TurtleBlock, and that can be replaced with normal
Minecraft explosion resistence!
- Pass in the fuel limit to the turtle block entity, rather than
deriving it from current family.
- The turtle BERs now derive their model from the turtle's item, rather
than the turtle's family.
- When creating upgrade/overlay recipes, use the item's name, rather
than {pocket,turtle}_family. This means we can drop getFamily() from
IComputerItem (it is still needed on to handle the UI).
- We replace IComputerItem.withFamily with a method to change to a
different item of the same type. ComputerUpgradeRecipe no longer
takes a family, and instead just uses the result's item.
- Computer blocks now use the normal Block.asItem() to find their
corresponding item, rather than looking it up via family.
The above means we can remove all the family-based XyzItem.create(...)
methods, which have always felt a little ugly.
We still need ComputerFamily for a couple of things:
- Permission checks for command computers.
- Checks for mouse/colour support in ServerComputer.
- UI textures.
This is a bit of an odd combination of a few bugs:
- When the terminal component is blurred, we fire a mouse_up event for
the last-held button. However, we had an off-by-1 error here, so this
only triggered for the right/middle buttons.
- This was obsucuring the second bug, which is when we clicked within
the terminal, this caused the terminal to be blurred (thus releasing
the mouse) and then focused again.
We fix this by only setting the focus if there's actually a change.
Fixes#1655
When adding/removing observers, we locked on the observer, then
acquired the global lock. When a metric is observed, then we acquire the
global lock and then the observer lock.
If these happen at the same time, we can easily end up with a deadlock.
We simply avoid holding the observer lock for the entire add/remove
process (instead only locking when actually needed).
Closes#1639
This commit adds abstract classes to describe the interface for our
mod-loader-specific generic peripherals (inventories, fluid storage,
item storage).
This offers several advantages:
- Javadoc to illuaminate conversion no longer needs the Forge project
(just core and common).
- Ensures we have a consistent interface between Forge and Fabric.
Note, this does /not/ implement fluid or energy storage for Fabric. We
probably could do fluid without issue, but not something worth doing
right now.
This adds a new "java_allocation" metric, which tracks the number of
bytes allocated while executing the computer (as measured by Java). This
is not an 100% reliable number, but hopefully gives some insight into
what computers are doing.
Historically CC has supported two modes when working with file handles
(and HTTP requests):
- Text mode, which reads/write using UTF-8.
- Binary mode, which reads/writes the raw bytes.
However, this can be confusing at times. CC/Lua doesn't actually support
unicode, so any characters beyond the 0.255 range were replaced with
'?'. This meant that most of the time you were better off just using
binary mode.
This commit unifies text and binary mode - we now /always/ read the raw
bytes of the file, rather than converting to/from UTF-8. Binary mode now
only specifies whether handle.read() returns a number (and .write(123)
writes a byte rather than coercing to a string).
- Refactor the entire handle hierarchy. We now have an AbstractMount
base class, which has the concrete implementation of all methods. The
public-facing classes then re-export these methods by annotating
them with @LuaFunction.
These implementations are based on the
Binary{Readable,Writable}Handle classes. The Encoded{..}Handle
versions are now entirely removed.
- As we no longer need to use BufferedReader/BufferedWriter, we can
remove quite a lot of logic in Filesystem to handle wrapping
closeable objects.
- Add a new WritableMount.openFile method, which generalises
openForWrite/openForAppend to accept OpenOptions. This allows us to
support update mode (r+, w+) in fs.open.
- fs.open now uses the new handle types, and supports update (r+, w+)
mode.
- http.request now uses the new readable handle type. We no longer
encode the request body to UTF-8, nor decode the response from UTF-8.
- Websockets now return text frame's contents directly, rather than
converting it from UTF-8. Sending text frames now attempts to treat
the passed string as UTF-8, rather than treating it as latin1.
Does it count as an emulator when it's official? I hope not, as this'd
make it my fourth or fifth emulator at this point.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Developing/debugging CraftOS is a massive pain to do inside Minecraft,
as any change to resources requires a compile+hot swap cycle (and
sometimes a `/reload` in-game). As such, it's often more convenient to
spin up an emulator, pointing it to load the ROM from CC:T's sources.
However, this isn't practical when also making changes to the Java
classes. In this case, we either need to go in-game, or build a custom
version of CCEmuX.
This commit offers an alternative option: we now have our own emulator,
which allows us to hot swap both Lua and Java to our heart's content.
Most of the code here is based on our monitor TBO renderer. We probably
could share some more of this, but there's not really a good place for
it - feels a bit weird just to chuck it in :core.
This is *not* a general-purpose emulator. It's limited in a lot of
ways (won't launch on Mac[^1], no support for multiple computers) - just
stick to what's there already.
[^1]: We require OpenGL 4.5 due to our use of DSA.
In practice, we're never going to change this to true by default. The
old Tekkit Legends pack enabled this[^1], and that caused a lot of
problems, though admittedly back in 2016 so things might be better now.
If people do want this functionality, it should be fairly easy to
replicate with a datapack, adding a file to rom/autorun.
[^1]: See https://www.computercraft.info/forums2/index.php?/topic/27663-
Hate that I remember this, why is this still in my brain?
- Move most error message constants to a new MountHelpers class.
- Be a little more consistent in when we throw "No such file" vs "Not a
file/directory" messages.
The two implementations aren't entirely compatible - the implementation
returned by .of will throw an NPE on .contains(null), whereas the
Collections implementations just return false. However, we try to avoid
passing null to collections methods, so this should be safe.
There's no strong reason to do this, but it helps make the code a little
more consistent
As of 1.20, sign messages are immutable - we need to do
text = text.setMesssage(...) instead. Also do a tiny bit of cleanup to
this function while we're here.
Probably not the best use of my lunch break :D:.
Fixes#1611.
Allows registering arbitrary block lookup functions instead of a
platform-specific capability. This is roughly what Fabric did before,
but generalised to also take an invalidation callback.
This callback is a little nasty - it needs to be a NonNullableConsumer
on Forge, but that class isn't available on Fabric. For now, we make the
lookup function (and thus the generic peripheral provider) generic on
some <T extends Runnable> type, then specialise that on the Forge side.
Hopefully we can clean this up when NeoForge reworks capabilities.
Or rather, being published to the wrong place. The java-convention
plugin sets the group, but that was applied after the publishing one - I
was hoping it'd read that property lazy, but clearly not!
Wow, some of this is /old/. All the Maps.newHashMap stuff dates back to
Java 6, so must originally be CCTweaks code?!
We're unlikely to drop our Guava dependency (we use too much other
stuff), but we should make the most of the stdlib where possible.
Previously we had the invariant that if we had a server monitor, we also
had a terminal. When a monitor shrank into a place, we deleted the
monitor, and then recreated it when a peripheral was requested.
As of ab785a0906 this has changed
slightly, and we now just delete the terminal (keeping the ServerMonitor
around). However, we didn't adjust the peripheral code accordingly,
meaning we didn't recreate the /terminal/ when a peripheral was
requested.
The fix for this is very simple - most of the rest of this commit is
some additional code for ensuring monitor invariants hold, so we can
write tests with a little more confidence.
I'm not 100% sold on this approach. It's tricky having a double layer of
nullable state (ServerMonitor, and then the terminal). However, I think
this is reasonable - the ServerMonitor is a reference to the multiblock,
and the Terminal is part of the multiblock's state.
Even after all the refactors, monitor code is still nastier than I'd
like :/.
Fixes#1608
We can't use FriendlyByte.readCollection to read to a
pre-allocated/array-backed NonNullList, as that doesn't implement
List.add. Instead, we just need to do a normal loop.
We add a couple of tests to round-trip our recipe specs. Unfortunately
we can't test the recipes themselves as our own registries aren't set
up, so this'll have to do for now.
Oh, this was a really nasty bug to reproduce. I'm not sure why - it's
very simple - I guess I've only just seen screenshots of it, and never
sat down to try myself. Reminder to actually report your bugs folks!
In this case:
1. Place down three down three monitors and then a computer.
2. Display something on the monitor (monitor left paint a) is my go-to.
3. Break the middle monitor.
We'd expect the left most monitor to be cleared, however it actually
preserves the monitor contents, resizing (and skewing it) to fit on its
new size!
This is because we clear the server monitor, but never sync that over to
the client, so the client monitor retains the old contents. To fix that,
instead of nulling out the server monitor, we null out the underlying
Terminal. This causes the change to be synced, fixing the bug.
This moves MemoryMount to the main core module, and converts it to be a
"proper" WritableMount. It's still naively implemented - definitely
would be good to flesh out our tests in the future - but enough for what
we need it for.
We also do the following:
- Remove the FileEntry.path variable, and instead pass the path around
as a variable.
- Clean up BinaryReadableHandle to use ByteBuffers in a more idiomatic
way.
- Add a couple more tests to our FS tests. These are in a bit of an odd
place, where we want both Lua tests (for emulator compliance) and
Java tests (for testing different implementations) - something to
think about in the future.
