- Turtle and pocket computers provide a "creator mod id" based on their
upgrade(s).
We track which mod was active when the upgrade was registered, and
use that to determine the owner. Technically we could use the
RegistryLocation ID, but this is not always correct (such as
Plethora's vanilla modules).
- We show all upgraded turtles/pocket computers in JEI now, rather than
just CC ones.
- We provide a custom IRecipeRegistryPlugin for upgrades, which
provides custom usage/recipes for any upgrade or upgraded item. We
also hide our generated turtle/pocket computer recipes in order to
prevent duplicates.
Previously we would register the recipes within our code, but the
advancements were written manually. This now generates JSON files for
both the advancement and recipe.
While this does mean we're shipping even more JSON, we'll need to do
this for 1.13 anyway, and means our advancements are guaranteed to be
consistent.
On a side note, a couple of other changes:
- Turtle upgrades are now mounted on the right in the creative
menu/fake recipes. This means the upgrade is now clearly visible in
the inventory.
- We no longer generate legacy turtle items at all: we'll always
construct turtle_expanded.
- Several peripheral items are no longer registered as having sub-types
(namely advanced and full-block modems).
- We only have one disk advancement now, which unlocks all 16 recipes.
- We have removed the disk conversion recipes - these can be
exposed through JEI if needed.
This allows wireless modems (advanced and normal) to be used in
multiparts. There's a very limited set of uses for this (mostly allows
using Chisel and Bits with them), but it's very simple to do.
I'd like to look into MCMP support for wired modems/cables in the
future, but this will be somewhat harder due to their pre-existing
multiblock structure.
Similarly, might be fun to look into CBMP compatibility.
- Share the ILuaContext across all method calls, as well as shifting it
into an anonymous class.
- Move the load/loadstring prefixing into bios.lua
- Be less militant in prefixing chunk names:
- load will no longer do any auto-prefixing.
- loadstring will not prefix when there no chunk name is supplied.
Before we would do `"=" .. supplied_program`, which made no sense.
- Only update all runtimes and the minimum runtime when queuing new
exectors. We only need to update the current executor's runtime.
- Fix overflows when comparing times within TimeoutState.
System.nanotime() may (though probably won't) return negative values.
- Hopefully explain how the scheduler works a little bit.
- Runners would set their active executor before starting resetting the
time, meaning it would be judged as running and terminated.
- Similarly, the cumulative time start was reset to 0, meaning the
computer had been judged to run for an impossibly long time.
- If a computer hit the terminate threshold, but not the hard abort
one, then we'd print the stack trace of the terminated thread - we
now do it before interrupting.
There's still race conditions here when terminating a computer, but
hopefully these changes will mean they never occur under normal
operations (only when a computer has run for far too long).
- Fix the timeout error message displaying utter rot.
- Don't resize the runner array. We don't handle this correctly, so
we shouldn't handle it at all.
- Increment virtualRuntime after a task has executed.
- The computer queue is a priority queue sorted by "virtual runtime".
- Virtual runtime is based on the time this task has executed, divided
by the number of pending tasks.
- We try to execute every task within a given period. Each computer is
allocated a fair share of that period, depending how many tasks are
in the queue. Once a computer has used more than that period, the
computer is paused and the next one resumed.
TimeoutState now introduces a TIMESLICE, which is the maximum period of
time a computer can run before we will look into pausing it.
When we have executed a task for more than this period, and if there are
other computers waiting to execute work, then we will suspend the
machine.
Suspending the machine sets a flag on the ComputerExecutor, and pauses
the "cumulative" time - the time spent handling this particular event.
When resuming the machine, we restart our timer and resume the machine.
Oh goodness, when will it end?
- Computer errors are shown in red.
- Lua machine operations provide whether they succeeded, and an
optional error message (reason bios failed to load, timeout error,
another Lua error), which is then shown to the user.
- Clear the Cobalt "thrown soft abort" flag when resuming, rather than
every n instructions.
- Computers will clear their "should start" flag once the time has
expired, irrespective of whether it turned on or not. Before
computers would immediately restart after shutting down if the flag
had been set much earlier.
Errors within the Lua machine are displayed in a more friendly
When closing a BufferedWriter, we close the underlying writer. As we're
using channels, this is an instance of sun.nio.cs.StreamEncoder. This
will attempt to flush the pending character.
However, if throwing an exception within .write errors, the flush will
fail and so the underlying stream is not closed. This was causing us to
leak file descriptors.
We fix this by introducing ChannelWrappers - this holds the wrapper
object (say, a BufferedWriter) and underlying channel. When closed, we
dispose of the wrapper, and then the channel. You could think of this as
doing a nested try-with-resources, rather than a single one.
Note, this is not related to JDK-6378948 - this occurs in the underlying
stream encoder instead.
- TimeoutState uses nanoseconds rather than milliseconds. While this is
slightly less efficient on Windows, it's a) not the bottleneck of Lua
execution and b) we need a monotonic counter, otherwise we could
fail to terminate computers if the time changes.
- Add an exception handler to all threads.
- Document several classes a little better - I'm not sure how useful
all of these are, but _hopefully_ it'll make the internals a little
more accessible.
- Move state management (turnOn, shutdown, etc...) event handling and
the command queue into a ComputerExecutor
- This means the computer thread now just handles running "work" on
computer executors, rather than managing a separate command queue +
requeuing it.
- Instead of setting soft/hard timeouts on the ILuaMachine, we instead
provide it with a TimeoutState instance. This holds the current abort
flags, which can then be polled within debug hooks.
This means the Lua machine has to do less state management, but also
allows a more flexible implementation of aborts.
- Soft aborts are now handled by the TimeoutState - we track when the
task was started, and now only need to check we're more than 7s since
then.
Note, these timers work with millisecond granularity, rather than
nano, as this invokes substantially less overhead.
- Instead of having n runners being observed with n managers, we now
have n runners and 1 manager (or Monitor).
The runners are now responsible for pulling work from the queue. When
the start to execute a task, they set the time execution commenced.
The monitor then just checks each runner every 0.1s and handles hard
aborts (or killing the thread if need be).
- Rename unload -> close to be a little more consistent
- Make pollAndResetChanged be atomic, so we don't need to aquire a lock
- Get the computer queue from the task owner, rather than a separate
argument.
Ideally we'd add a couple more tests in the future, but this'll do for
now.
The bootstrap class is largely yoinked from CCTweaks-Lua, so is a tad
ugly. It works though.
Prior to this change we would schedule a new task which attached
peripherals on the ComputerThread on the empty task queue. This had a
couple of issues:
- Slow running tasks on the computer thread could result in delays in
peripherals being attached (technically, though rarely seen in
practice).
- Now that the ComputerThread runs tasks at once, there was a race
condition in computers being turned on/off and peripherals being
attached/detached.
Note, while the documentation said that peripherals would only be
(at|de)tached on the computer thread, wired modems would attach on the
server thread, so this was not the case in practice.
One should be aware that peripherals are still detached on the
computer thread, most notably when turning a computer on/off.
This is almost definitely going to break some less well-behaved mods,
and possible some of the well behaved ones. I've tested this on SC, so
it definitely works fine with Computronics and Plethora.
- Restrict what items can be inserted into printers. They're now closer
to brewing stands or furnaces: nothing can go in the output slot,
only ink in the ink slot, and only paper in the paper slot.
- Fix build.gradle using the wrong version
- Trim the width of tables to fit when displaying on the client. Closes
#45. Note, our solution isn't perfect, as it will wordwrap too, but
it's adaquate for now.
When a turtle was unloaded but not actually disposed of, the
m_peripheral map hangs around. As a result, when creating a new
ServerComputer, the peripherals aren't considered changed and so they're
never attached.
Fixes#50.
Also fix that blumin' deprecated method which has been around for a wee
while now.
The Computer class currently has several resposiblities such as storing
id/label, managing redstone/peirpherals, handling management of the
computer (on/off/events) and updating the output.
In order to simplify this a little bit, we move our IAPIEnvironment
implementation into a separate file, and store all "world state"
(redstone + peripherals) in there. While we still need to have some
level of updating them within the main Computer instance, it's
substantially simpler.
- Fire close events instead of failure when open websockets error.
- Handle ping events. I thought I was doing this already, but this
requires a WebsocketProtocolHandler. Fixes#118
The latest version of Cobalt has several major changes, which I'm
looking forward to taking advantage of in the coming months:
- The Lua interpreter has been split up from the actual LuaClosure
instance. It now runs multiple functions within one loop, handling
pushing/popping and resuming method calls correctly.
This means we have a theoretically infinite call depth, as we're no
longer bounded by Java's stack size. In reality, this is limited to
32767 (Short.MAX_VALUE), as that's a mostly equivalent to the limits
PUC Lua exposes.
- The stack is no longer unwound in the event of errors. This both
simplifies error handling (not that CC:T needs to care about that)
but also means one can call debug.traceback on a now-dead coroutine
(which is more useful for debugging than using xpcall).
- Most significantly, coroutines are no longer each run on a dedicated
thread. Instead, yielding or resuming throws an exception to unwind
the Java stack and switches to a different coroutine.
In order to preserve compatability with CC's assumption about LuaJ's
threading model (namely that yielding blocks the thread), we also
provide a yieldBlock method (which CC:T consumes). This suspends the
current thread and switches execution to a new thread (see
SquidDev/Cobalt@b5ddf164f1 for more
details). While this does mean we need to use more than 1 thread,
it's still /substantially/ less than would otherwise be needed.
We've been running these changes on SwitchCraft for a few days now and
haven't seen any issues. One nice thing to observe is that the number of
CC thread has gone down from ~1.9k to ~100 (of those, ~70 are dedicated
to running coroutines). Similarly, the server has gone from generating
~15k threads over its lifetime, to ~3k. While this is still a lot, it's
a substantial improvement.
This is far more elegant than our weird method of baking things and
manually inserting them into the model map. Also means we no longer need
the whole turtle_dynamic thing.
We moved the direction call within the if block, but never actally
updated the condition! I'm on a roll of stupid bug fixes today, which
really isn't a good sign.
- Only have computers implement custom block drop logic: everything
else only drops in creative mode.
- Fix redstone inputs not being received correctly. Introduced in
8b86a954ee, yes I'm a silly billy.
- Only update the neighbour which changed.
- Convert terminals from a polling-based system to a more event-driven
one: they now accept an onChanged callback, which marks the parent as
dirty.
- Schedule ticks when monitors are marked as dirty.
- Add several missing @Overrides. This has nothing to do with the rest
of the changes, but I'm bad at good git practice.
- Merge BlockPeripheralBase and BlockPeripheral, as no other classes
extended the former.
- Make BlockPeripheral use ITilePeripheral instead of
TilePeripheralBase. This allows us to use other, non-ticking tiles
instead.
- Convert advanced and normal modems to extend from a generic
TileWirelessModemBase class, and thus neither now tick.
- Move getPeripheralType and getLabel from IPeripheralTile to
TilePeripheralBase. These were mostly constant on all other tiles, so
were rather redundant.
- Make TileAdvancedModem extend TileGeneric, and be non-ticking (using
similar logic to all other blocks).
- Move updateTick onto BlockGeneric/TileGeneric instead of the full
wired modem, as it is used by several tiles now.
- Make *Cable extend from *Generic, and schedule ticks instead of
running every tick.
