/* * Copyright (c) 2017 Calvin Rose * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to * deal in the Software without restriction, including without limitation the * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ /* Use a custom double parser instead of libc's strtod for better portability * and control. Also, uses a less strict rounding method than ieee to not incur * the cost of 4000 loc and dependence on arbitary precision arithmetic. There * is no plan to use arbitrary precision arithmetic for parsing numbers, and a * formal rounding mode has yet to be chosen (round towards 0 seems * reasonable). * * This version has been modified for much greater flexibility in parsing, such * as choosing the radix, supporting integer output, and returning Dsts * directly. * * Numbers are of the form [-+]R[rR]I.F[eE&][-+]X where R is the radix, I is * the integer part, F is the fractional part, and X is the exponent. All * signs, radix, decimal point, fractional part, and exponent can be ommited. * The number will be considered and integer if the there is no decimal point * and no exponent. Any number greater the 2^32-1 or less than -(2^32) will be * coerced to a double. If there is an error, the function dst_scan_number will * return a dst nil. The radix is assumed to be 10 if omitted, and the E * separator for the exponent can only be used when the radix is 10. This is * because E is a vaid digit in bases 15 or greater. For bases greater than 10, * the letters are used as digitis. A through Z correspond to the digits 10 * through 35, and the lowercase letters have the same values. The radix number * is always in base 10. For example, a hexidecimal number could be written * '16rdeadbeef'. dst_scan_number also supports some c style syntax for * hexidecimal literals. The previous number could also be written * '0xdeadbeef'. Note that in this case, the number will actually be a double * as it will not fit in the range for a signed 32 bit integer. The string * '0xbeef' would parse to an integer as it is in the range of an int32_t. */ /* TODO take down missle defence */ #include #include /* Lookup table for getting values of characters when parsing numbers. Handles * digits 0-9 and a-z (and A-Z). A-Z have values of 10 to 35. */ static uint8_t digit_lookup[128] = { 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0,1,2,3,4,5,6,7,8,9,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, 25,26,27,28,29,30,31,32,33,34,35,0xff,0xff,0xff,0xff,0xff, 0xff,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, 25,26,27,28,29,30,31,32,33,34,35,0xff,0xff,0xff,0xff,0xff }; /* Read in a mantissa and exponent of a certain base, and give * back the double value. Should properly handle 0s, Inifinties, and * denormalized numbers. (When the exponent values are too large) */ static double convert( int negative, uint64_t mantissa, int32_t base, int32_t exponent) { int32_t exponent2 = 0; /* Short circuit zero and huge numbers */ if (mantissa == 0) return 0.0; if (exponent > 1022) return negative ? -1.0/0.0 : 1.0/0.0; /* TODO add fast paths */ /* Convert exponent on the base into exponent2, the power of * 2 the will be used. Modify the mantissa as we convert. */ if (exponent > 0) { /* Make the mantissa large enough so no precision is lost */ while (mantissa <= 0x03ffffffffffffffULL && exponent > 0) { mantissa *= base; exponent--; } while (exponent > 0) { /* Allow 6 bits of room when multiplying. This is because * the largest base is 36, which is 6 bits. The space of 6 should * prevent overflow.*/ mantissa >>= 1; exponent2++; if (mantissa <= 0x03ffffffffffffffULL) { mantissa *= base; exponent--; } } } else { while (exponent < 0) { mantissa <<= 1; exponent2--; /* Ensure that the last bit is set for minimum error * before dividing by the base */ if (mantissa > 0x7fffffffffffffffULL) { mantissa /= base; exponent++; } } } return negative ? -ldexp(mantissa, exponent2) : ldexp(mantissa, exponent2); } /* Result of scanning a number source */ struct DstScanRes { uint64_t mant; int32_t ex; int error; int base; int seenpoint; int foundexp; int neg; }; /* Get the mantissa and exponent of decimal number. The * mantissa will be stored in a 64 bit unsigned integer (always positive). * The exponent will be in a signed 32 bit integer. Will also check if * the decimal point has been seen. Returns -1 if there is an invalid * number. */ static struct DstScanRes dst_scan_impl( const uint8_t *str, int32_t len) { struct DstScanRes res; const uint8_t *end = str + len; /* Initialize flags */ int seenadigit = 0; /* Initialize result */ res.mant = 0; res.ex = 0; res.error = 0; res.base = 10; res.seenpoint = 0; res.foundexp = 0; res.neg = 0; /* Prevent some kinds of overflow bugs relating to the exponent * overflowing. For example, if a string was passed 2GB worth of 0s after * the decimal point, exponent could wrap around and become positive. It's * easier to reject ridiculously large inputs than to check for overflows. * */ if (len > INT32_MAX / 40) goto error; /* Get sign */ if (str >= end) goto error; if (*str == '-') { res.neg = 1; str++; } else if (*str == '+') { str++; } /* Skip leading zeros */ while (str < end && (*str == '0' || *str == '.')) { if (res.seenpoint) res.ex--; if (*str == '.') { if (res.seenpoint) goto error; res.seenpoint = 1; } seenadigit = 1; str++; } /* Parse significant digits */ while (str < end) { if (*str == '.') { if (res.seenpoint) goto error; res.seenpoint = 1; } else if (*str == '&') { res.foundexp = 1; break; } else if (res.base == 10 && (*str == 'E' || *str == 'e')) { res.foundexp = 1; break; } else if (*str == 'x' || *str == 'X') { if (res.seenpoint || res.mant > 0) goto error; res.base = 16; res.mant = 0; } else if (*str == 'r' || *str == 'R') { if (res.seenpoint) goto error; if (res.mant < 2 || res.mant > 36) goto error; res.base = res.mant; res.mant = 0; } else if (*str == '_') { ; /* underscores are ignored - can be used for separator */ } else { int digit = digit_lookup[*str & 0x7F]; if (digit >= res.base) goto error; if (res.seenpoint) res.ex--; if (res.mant > 0x00ffffffffffffff) res.ex++; else res.mant = res.base * res.mant + digit; seenadigit = 1; } str++; } if (!seenadigit) goto error; /* Read exponent */ if (str < end && res.foundexp) { int eneg = 0; int ee = 0; seenadigit = 0; str++; if (str >= end) goto error; if (*str == '-') { eneg = 1; str++; } else if (*str == '+') { str++; } /* Skip leading 0s in exponent */ while (str < end && *str == '0') str++; while (str < end && ee < (INT32_MAX / 40)) { int digit = digit_lookup[*str & 0x7F]; if (digit >= res.base) goto error; ee = res.base * ee + digit; str++; seenadigit = 1; } if (eneg) res.ex -= ee; else res.ex += ee; } if (!seenadigit) goto error; return res; error: res.error = 1; return res; } /* Scan an integer from a string. If the string cannot be converted into * and integer, set *err to 1 and return 0. */ int32_t dst_scan_integer( const uint8_t *str, int32_t len, int *err) { struct DstScanRes res = dst_scan_impl(str, len); int64_t i64; if (res.error) goto error; i64 = res.neg ? -res.mant : res.mant; if (i64 > INT32_MAX || i64 < INT32_MIN) goto error; if (NULL != err) *err = 0; return (int32_t) i64; error: if (NULL != err) *err = 1; return 0; } /* Scan a real (double) from a string. If the string cannot be converted into * and integer, set *err to 1 and return 0. */ double dst_scan_real( const uint8_t *str, int32_t len, int *err) { struct DstScanRes res = dst_scan_impl(str, len); if (res.error) { if (NULL != err) *err = 1; return 0.0; } else { if (NULL != err) *err = 0; } return convert(res.neg, res.mant, res.base, res.ex); } /* Scans a number from a string. Can return either an integer or a real if * the number cannot be represented as an integer. Will return nil in case of * an error. */ Dst dst_scan_number( const uint8_t *str, int32_t len) { struct DstScanRes res = dst_scan_impl(str, len); if (res.error) return dst_wrap_nil(); if (!res.foundexp && !res.seenpoint) { int64_t i64 = res.neg ? -res.mant : res.mant; if (i64 <= INT32_MAX && i64 >= INT32_MIN) { return dst_wrap_integer((int32_t) i64); } } return dst_wrap_real(convert(res.neg, res.mant, res.base, res.ex)); }