mirror of
https://github.com/gnss-sdr/gnss-sdr
synced 2024-11-08 11:00:04 +00:00
a6df9f8c6f
Added information on how to retrieve SUPL parameters, and indicators to userd on where to point to their own file or IP address. Removed unused parameter wait_for_flowgraph.
147 lines
5.0 KiB
Plaintext
147 lines
5.0 KiB
Plaintext
; You can define your own receiver and invoke it by doing
|
|
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
|
|
;
|
|
|
|
[GNSS-SDR]
|
|
|
|
;######### GLOBAL OPTIONS ##################
|
|
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
|
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
|
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
|
GNSS-SDR.internal_fs_hz=1999898
|
|
|
|
|
|
;######### SUPL RRLP GPS assistance configuration #####
|
|
; Check http://www.mcc-mnc.com/
|
|
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
|
|
GNSS-SDR.SUPL_gps_enabled=false
|
|
GNSS-SDR.SUPL_read_gps_assistance_xml=false
|
|
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
|
|
GNSS-SDR.SUPL_gps_ephemeris_port=7275
|
|
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
|
|
GNSS-SDR.SUPL_gps_acquisition_port=7275
|
|
GNSS-SDR.SUPL_MCC=244
|
|
GNSS-SDR.SUPL_MNS=5
|
|
GNSS-SDR.SUPL_LAC=0x59e2
|
|
GNSS-SDR.SUPL_CI=0x31b0
|
|
|
|
;######### SIGNAL_SOURCE CONFIG ############
|
|
SignalSource.implementation=Osmosdr_Signal_Source
|
|
;SignalSource.filename=/media/DATALOGGER_/signals/RTL-SDR/geo/pmt4.dat
|
|
SignalSource.item_type=gr_complex
|
|
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
|
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
|
SignalSource.sampling_frequency=2000000
|
|
SignalSource.freq=1575420000
|
|
SignalSource.gain=40
|
|
SignalSource.rf_gain=40
|
|
SignalSource.if_gain=30
|
|
SignalSource.AGC_enabled = false
|
|
SignalSource.samples=0
|
|
SignalSource.repeat=false
|
|
SignalSource.dump=false
|
|
SignalSource.dump_filename=../data/signal_source.dat
|
|
SignalSource.enable_throttle_control=false
|
|
|
|
;######### SIGNAL_CONDITIONER CONFIG ############
|
|
SignalConditioner.implementation=Signal_Conditioner
|
|
|
|
;######### DATA_TYPE_ADAPTER CONFIG ############
|
|
DataTypeAdapter.implementation=Pass_Through
|
|
|
|
;######### INPUT_FILTER CONFIG ############
|
|
InputFilter.implementation=Freq_Xlating_Fir_Filter
|
|
InputFilter.dump=false
|
|
InputFilter.dump_filename=../data/input_filter.dat
|
|
InputFilter.input_item_type=gr_complex
|
|
InputFilter.output_item_type=gr_complex
|
|
InputFilter.taps_item_type=float
|
|
InputFilter.number_of_taps=5
|
|
InputFilter.number_of_bands=2
|
|
InputFilter.band1_begin=0.0
|
|
InputFilter.band1_end=0.45
|
|
InputFilter.band2_begin=0.55
|
|
InputFilter.band2_end=1.0
|
|
InputFilter.ampl1_begin=1.0
|
|
InputFilter.ampl1_end=1.0
|
|
InputFilter.ampl2_begin=0.0
|
|
InputFilter.ampl2_end=0.0
|
|
InputFilter.band1_error=1.0
|
|
InputFilter.band2_error=1.0
|
|
InputFilter.filter_type=bandpass
|
|
InputFilter.grid_density=16
|
|
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
|
|
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
|
|
InputFilter.sampling_frequency=1999898
|
|
InputFilter.IF=80558 ; IF deviation due to front-end LO inaccuracies [Hz]
|
|
|
|
;######### RESAMPLER CONFIG ############
|
|
;## Resamples the input data.
|
|
;# DISABLED IN THE RTL-SDR REALTIME
|
|
;#implementation: Use [Pass_Through] or [Direct_Resampler]
|
|
;#[Pass_Through] disables this block
|
|
Resampler.implementation=Pass_Through
|
|
|
|
;######### CHANNELS GLOBAL CONFIG ############
|
|
Channels_1C.count=4
|
|
Channels.in_acquisition=1
|
|
Channel.signal=1C
|
|
|
|
|
|
;######### ACQUISITION GLOBAL CONFIG ############
|
|
Acquisition_1C.dump=false
|
|
Acquisition_1C.dump_filename=./acq_dump.dat
|
|
Acquisition_1C.item_type=gr_complex
|
|
Acquisition_1C.if=0
|
|
Acquisition_1C.sampled_ms=1
|
|
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
|
|
Acquisition_1C.threshold=0.015
|
|
;Acquisition_1C.pfa=0.0001
|
|
Acquisition_1C.doppler_max=10000
|
|
Acquisition_1C.doppler_min=-10000
|
|
Acquisition_1C.doppler_step=500
|
|
Acquisition_1C.max_dwells=15
|
|
|
|
|
|
;######### TRACKING GLOBAL CONFIG ############
|
|
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
|
|
Tracking_1C.item_type=gr_complex
|
|
Tracking_1C.if=0
|
|
Tracking_1C.dump=false
|
|
Tracking_1C.dump_filename=./tracking_ch_
|
|
Tracking_1C.pll_bw_hz=40.0;
|
|
Tracking_1C.dll_bw_hz=2.0;
|
|
Tracking_1C.order=3;
|
|
Tracking_1C.early_late_space_chips=0.5;
|
|
|
|
;######### TELEMETRY DECODER GPS CONFIG ############
|
|
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
|
|
TelemetryDecoder_1C.dump=false
|
|
TelemetryDecoder_1C.decimation_factor=1;
|
|
|
|
;######### OBSERVABLES CONFIG ############
|
|
Observables.implementation=GPS_L1_CA_Observables
|
|
Observables.dump=false
|
|
Observables.dump_filename=./observables.dat
|
|
|
|
|
|
;######### PVT CONFIG ############
|
|
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
|
PVT.implementation=GPS_L1_CA_PVT
|
|
|
|
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
|
PVT.averaging_depth=10
|
|
|
|
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
|
PVT.flag_averaging=true
|
|
PVT.output_rate_ms=100
|
|
PVT.display_rate_ms=500
|
|
PVT.dump_filename=./PVT
|
|
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
|
|
PVT.flag_nmea_tty_port=false;
|
|
PVT.nmea_dump_devname=/dev/pts/4
|
|
PVT.dump=false
|
|
PVT.flag_rtcm_server=false
|
|
PVT.flag_rtcm_tty_port=false
|
|
PVT.rtcm_dump_devname=/dev/pts/1
|