mirrors/gnss-sdr
1
0
Fork 0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-06-30 17:03:15 +00:00
Code Issues Releases Wiki Activity
a6df9f8c6f
gnss-sdr/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf
Carles Fernandez a6df9f8c6f Clean configuration files 
Added information on how to retrieve SUPL parameters, and indicators to
userd on where to point to their own file or IP address. Removed unused
parameter wait_for_flowgraph.
2016-05-15 14:27:51 +02:00

433 lines
16 KiB
Plaintext
Raw Blame History

; Default configuration file
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=5000000
;######### SUPL RRLP GPS assistance configuration #####
; Check http://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=244
GNSS-SDR.SUPL_MNS=5
GNSS-SDR.SUPL_LAC=0x59e2
GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=Flexiband_Signal_Source
SignalSource.flag_read_file=true
SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
;# FPGA firmware file
SignalSource.firmware_file=flexiband_III-1b.bit
;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file
SignalSource.RF_channels=2
;#frontend channels gain. Not usable yet!
SignalSource.gain1=0
SignalSource.gain2=0
SignalSource.gain3=0
;#frontend channels AGC
SignalSource.AGC=true
;# USB 3.0 packet buffer size (number of SuperSpeed packets)
SignalSource.usb_packet_buffer=128
;######################################################
;######### RF CHANNEL 0 SIGNAL CONDITIONER ############
;######################################################
;######### SIGNAL_CONDITIONER 0 CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
SignalConditioner0.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER 0 CONFIG ############
DataTypeAdapter0.implementation=Pass_Through
DataTypeAdapter0.item_type=gr_complex
;######### INPUT_FILTER 0 CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
InputFilter0.implementation=Freq_Xlating_Fir_Filter
;#dump: Dump the filtered data to a file.
InputFilter0.dump=false
;#dump_filename: Log path and filename.
InputFilter0.dump_filename=../data/input_filter_ch0.dat
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
;#These options are based on parameters of gnuradio's function: gr_remez.
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
;#the desired reponse on those bands, and the weight given to the error in those bands.
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
InputFilter0.input_item_type=gr_complex
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
InputFilter0.output_item_type=gr_complex
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
InputFilter0.taps_item_type=float
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
InputFilter0.number_of_taps=5
;#number_of _bands: Number of frequency bands in the filter.
InputFilter0.number_of_bands=2
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
;#The number of band_begin and band_end elements must match the number of bands
InputFilter0.band1_begin=0.0
InputFilter0.band1_end=0.45
InputFilter0.band2_begin=0.55
InputFilter0.band2_end=1.0
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
;#The number of ampl_begin and ampl_end elements must match the number of bands
InputFilter0.ampl1_begin=1.0
InputFilter0.ampl1_end=1.0
InputFilter0.ampl2_begin=0.0
InputFilter0.ampl2_end=0.0
;#band_error: weighting applied to each band (usually 1).
;#The number of band_error elements must match the number of bands
InputFilter0.band1_error=1.0
InputFilter0.band2_error=1.0
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
InputFilter0.filter_type=bandpass
;#grid_density: determines how accurately the filter will be constructed.
;The minimum value is 16; higher values are slower to compute the filter.
InputFilter0.grid_density=16
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
InputFilter0.sampling_frequency=20000000
;# IF deviation due to front-end LO inaccuracies [HZ]
;#InputFilter0.IF=-205000
InputFilter0.IF=0
;# Decimation factor after the frequency tranaslating block
InputFilter0.decimation_factor=4
;######### RESAMPLER CONFIG 0 ############
;## Resamples the input data.
Resampler0.implementation=Pass_Through
;######################################################
;######### RF CHANNEL 1 SIGNAL CONDITIONER ############
;######################################################
;######### SIGNAL_CONDITIONER 1 CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
SignalConditioner1.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER 1 CONFIG ############
DataTypeAdapter1.implementation=Pass_Through
DataTypeAdapter1.item_type=gr_complex
;######### INPUT_FILTER 0 CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
InputFilter1.implementation=Freq_Xlating_Fir_Filter
;#dump: Dump the filtered data to a file.
InputFilter1.dump=false
;#dump_filename: Log path and filename.
InputFilter1.dump_filename=../data/input_filter_ch1.dat
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
;#These options are based on parameters of gnuradio's function: gr_remez.
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
;#the desired reponse on those bands, and the weight given to the error in those bands.
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
InputFilter1.input_item_type=gr_complex
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
InputFilter1.output_item_type=gr_complex
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
InputFilter1.taps_item_type=float
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
InputFilter1.number_of_taps=5
;#number_of _bands: Number of frequency bands in the filter.
InputFilter1.number_of_bands=2
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
;#The number of band_begin and band_end elements must match the number of bands
InputFilter1.band1_begin=0.0
InputFilter1.band1_end=0.45
InputFilter1.band2_begin=0.55
InputFilter1.band2_end=1.0
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
;#The number of ampl_begin and ampl_end elements must match the number of bands
InputFilter1.ampl1_begin=1.0
InputFilter1.ampl1_end=1.0
InputFilter1.ampl2_begin=0.0
InputFilter1.ampl2_end=0.0
;#band_error: weighting applied to each band (usually 1).
;#The number of band_error elements must match the number of bands
InputFilter1.band1_error=1.0
InputFilter1.band2_error=1.0
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
InputFilter1.filter_type=bandpass
;#grid_density: determines how accurately the filter will be constructed.
;The minimum value is 16; higher values are slower to compute the filter.
InputFilter1.grid_density=16
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
InputFilter1.sampling_frequency=20000000
;# IF deviation due to front-end LO inaccuracies [HZ]
InputFilter1.IF=0
;# Decimation factor after the frequency tranaslating block
InputFilter1.decimation_factor=4
;######### RESAMPLER CONFIG 1 ############
;## Resamples the input data.
Resampler1.implementation=Pass_Through
;######### SIGNAL_CONDITIONER 2 CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
SignalConditioner2.implementation=Pass_Through
;######### DATA_TYPE_ADAPTER 2 CONFIG ############
DataTypeAdapter2.implementation=Pass_Through
DataTypeAdapter2.item_type=gr_complex
;######### INPUT_FILTER 2 CONFIG ############
InputFilter2.implementation=Pass_Through
;#dump: Dump the filtered data to a file.
InputFilter2.dump=false
;#dump_filename: Log path and filename.
InputFilter2.dump_filename=../data/input_filter.dat
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
InputFilter2.input_item_type=gr_complex
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
InputFilter2.output_item_type=gr_complex
;######### RESAMPLER CONFIG 2 ############
;## Resamples the input data.
Resampler2.implementation=Pass_Through
;######### CHANNELS GLOBAL CONFIG ############
;#count: Number of available GPS satellite channels.
Channels_1C.count=1
Channels_2S.count=8
;#GPS.prns=7,8
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
Channels.in_acquisition=1
;# signal:
;# "1C" GPS L1 C/A
;# "2S" GPS L2 L2C (M)
;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL)
;# "5X" GALILEO E5a I+Q
;# CHANNEL NUMBERING ORDER: GPS L1 C/A, GPS L2 L2C (M), GALILEO E1 B, GALILEO E5a
;# CHANNEL CONNECTION
Channel0.RF_channel_ID=0
Channel1.RF_channel_ID=1
Channel2.RF_channel_ID=1
Channel3.RF_channel_ID=1
Channel4.RF_channel_ID=1
Channel5.RF_channel_ID=1
Channel6.RF_channel_ID=1
Channel7.RF_channel_ID=1
Channel8.RF_channel_ID=1
;######### ACQUISITION GENERIC CONFIG ######
;#The following options are specific to each channel and overwrite the generic options
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=./acq_dump.dat
Acquisition_1C.item_type=gr_complex
Acquisition_1C.if=0
Acquisition_1C.coherent_integration_time_ms=1
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.threshold=0.005
Acquisition_1C.doppler_max=5000
Acquisition_1C.doppler_step=250
Acquisition_1C.bit_transition_flag=false
Acquisition_1C.max_dwells=1
Acquisition_2S.dump=false
Acquisition_2S.dump_filename=./acq_dump.dat
Acquisition_2S.item_type=gr_complex
Acquisition_2S.if=0
Acquisition_2S.coherent_integration_time_ms=1
Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition
Acquisition_2S.threshold=0.0005
Acquisition_2S.doppler_max=5000
Acquisition_2S.doppler_step=100
Acquisition_2S.bit_transition_flag=false
Acquisition_2S.max_dwells=1
;# channel specific config
Acquisition_2S1.dump=false
Acquisition_2S1.dump_filename=./acq_dump.dat
Acquisition_2S1.item_type=gr_complex
Acquisition_2S1.if=0
Acquisition_2S1.coherent_integration_time_ms=1
Acquisition_2S1.implementation=GPS_L2_M_PCPS_Acquisition
Acquisition_2S1.threshold=0.0005
Acquisition_2S1.doppler_max=5000
Acquisition_2S1.doppler_step=100
Acquisition_2S1.bit_transition_flag=false
Acquisition_2S1.max_dwells=1
;######### TRACKING CONFIG ############
;######### GPS L1 C/A GENERIC TRACKING CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.if=0
Tracking_1C.dump=true
Tracking_1C.dump_filename=../data/epl_tracking_ch_
Tracking_1C.pll_bw_hz=40.0;
Tracking_1C.dll_bw_hz=3.0;
Tracking_1C.order=3;
Tracking_1C.early_late_space_chips=0.5;
;######### GPS L2C GENERIC TRACKING CONFIG ############
Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking
Tracking_2S.item_type=gr_complex
Tracking_2S.if=0
Tracking_2S.dump=true
Tracking_2S.dump_filename=../data/epl_tracking_ch_
Tracking_2S.pll_bw_hz=2.0;
Tracking_2S.dll_bw_hz=0.5;
Tracking_2S.order=2;
Tracking_2S.early_late_space_chips=0.5;
;######### GPS L2C SPECIFIC CHANNEL TRACKING CONFIG ############
Tracking_2S1.implementation=GPS_L2_M_DLL_PLL_Tracking
Tracking_2S1.item_type=gr_complex
Tracking_2S1.if=0
Tracking_2S1.dump=true
Tracking_2S1.dump_filename=../data/epl_tracking_ch_
Tracking_2S1.pll_bw_hz=2.0;
Tracking_2S1.dll_bw_hz=0.5;
Tracking_2S1.order=2;
Tracking_2S1.early_late_space_chips=0.5;
;######### TELEMETRY DECODER CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
TelemetryDecoder_1C.decimation_factor=20;
TelemetryDecoder_2S.implementation=GPS_L2_M_Telemetry_Decoder
TelemetryDecoder_2S.dump=false
TelemetryDecoder_2S.decimation_factor=1;
;######### OBSERVABLES CONFIG ############
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
Observables.implementation=GPS_L1_CA_Observables
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
Observables.dump=false
;#dump_filename: Log path and filename.
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
PVT.implementation=GPS_L1_CA_PVT
;#averaging_depth: Number of PVT observations in the moving average algorithm
PVT.averaging_depth=10
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
PVT.flag_averaging=true
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
PVT.output_rate_ms=100
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
PVT.display_rate_ms=500
;# KML, GeoJSON, NMEA and RTCM output configuration
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
PVT.dump_filename=./PVT
;#nmea_dump_filename: NMEA log path and filename
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
PVT.flag_nmea_tty_port=false;
;#nmea_dump_devname: serial device descriptor for NMEA logging
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
PVT.dump=false
Reference in New Issue View Git Blame Copy Permalink