mirror of
https://github.com/gnss-sdr/gnss-sdr
synced 2024-11-17 23:34:56 +00:00
c241b7b1d6
- Added simulink-based Galileo_E1_DLL_PLL_VEML_Tracking git-svn-id: https://svn.code.sf.net/p/gnss-sdr/code/trunk@250 64b25241-fba3-4117-9849-534c7e92360d
273 lines
10 KiB
Plaintext
273 lines
10 KiB
Plaintext
|
|
[GNSS-SDR]
|
|
|
|
;######### GLOBAL OPTIONS ##################
|
|
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
|
|
GNSS-SDR.internal_fs_hz=4000000
|
|
|
|
;######### CONTROL_THREAD CONFIG ############
|
|
ControlThread.wait_for_flowgraph=false
|
|
|
|
;######### SIGNAL_SOURCE CONFIG ############
|
|
;#implementation: Use File_Signal_Source or UHD_Signal_Source or GN3S_Signal_Source (experimental)
|
|
SignalSource.implementation=File_Signal_Source
|
|
|
|
;#filename: path to file with the captured GNSS signal samples to be processed
|
|
SignalSource.filename=/home/engunit/workspace/cap2/cp_cttc_1_galileo_4Msps.dat
|
|
|
|
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
|
SignalSource.item_type=gr_complex
|
|
|
|
;#sampling_frequency: Original Signal sampling frequency in [Hz]
|
|
SignalSource.sampling_frequency=4000000
|
|
|
|
;#freq: RF front-end center frequency in [Hz]
|
|
SignalSource.freq=1575420000
|
|
|
|
;#gain: Front-end Gain in [dB]
|
|
SignalSource.gain=50
|
|
|
|
;#subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0)
|
|
SignalSource.subdevice=B:0
|
|
|
|
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
|
|
SignalSource.samples=0
|
|
|
|
;#repeat: Repeat the processing file. Disable this option in this version
|
|
SignalSource.repeat=false
|
|
|
|
;#dump: Dump the Signal source data to a file. Disable this option in this version
|
|
SignalSource.dump=false
|
|
|
|
SignalSource.dump_filename=../data/signal_source.dat
|
|
|
|
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
|
|
; it helps to not overload the CPU, but the processing time will be longer.
|
|
SignalSource.enable_throttle_control=false
|
|
|
|
|
|
;######### SIGNAL_CONDITIONER CONFIG ############
|
|
;## It holds blocks to change data type, filter and resample input data.
|
|
;#implementation: Pass_Through disables this block
|
|
SignalConditioner.implementation=Pass_Through
|
|
|
|
;######### DATA_TYPE_ADAPTER CONFIG ############
|
|
;## Changes the type of input data. Please disable it in this version.
|
|
;#implementation: Pass_Through disables this block
|
|
DataTypeAdapter.implementation=Pass_Through
|
|
|
|
;######### INPUT_FILTER CONFIG ############
|
|
;## Filter the input data. Can be combined with frequency translation for IF signals
|
|
|
|
;#implementation: Pass_Through disables this block
|
|
;InputFilter.implementation=Fir_Filter
|
|
InputFilter.implementation=Pass_Through
|
|
|
|
;#dump: Dump the filtered data to a file.
|
|
InputFilter.dump=false
|
|
|
|
;#dump_filename: Log path and filename.
|
|
InputFilter.dump_filename=../data/input_filter.dat
|
|
|
|
;#The following options are used in the filter design of Fir_Filter implementation.
|
|
;#These options are based on parameters of gnuradio's function: gr_remez.
|
|
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges, the desired reponse on those bands, and the weight given to the error in those bands.
|
|
|
|
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
|
|
InputFilter.input_item_type=gr_complex
|
|
|
|
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
|
|
InputFilter.output_item_type=gr_complex
|
|
|
|
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
|
|
InputFilter.taps_item_type=float
|
|
|
|
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
|
|
InputFilter.number_of_taps=5
|
|
|
|
;#number_of _bands: Number of frequency bands in the filter.
|
|
InputFilter.number_of_bands=2
|
|
|
|
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
|
|
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
|
|
;#The number of band_begin and band_end elements must match the number of bands
|
|
|
|
InputFilter.band1_begin=0.0
|
|
InputFilter.band1_end=0.45
|
|
InputFilter.band2_begin=0.55
|
|
InputFilter.band2_end=1.0
|
|
|
|
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
|
|
;#The number of ampl_begin and ampl_end elements must match the number of bands
|
|
|
|
InputFilter.ampl1_begin=1.0
|
|
InputFilter.ampl1_end=1.0
|
|
InputFilter.ampl2_begin=0.0
|
|
InputFilter.ampl2_end=0.0
|
|
|
|
;#band_error: weighting applied to each band (usually 1).
|
|
;#The number of band_error elements must match the number of bands
|
|
InputFilter.band1_error=1.0
|
|
InputFilter.band2_error=1.0
|
|
|
|
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
|
|
InputFilter.filter_type=bandpass
|
|
|
|
;#grid_density: determines how accurately the filter will be constructed.
|
|
;The minimum value is 16; higher values are slower to compute the filter.
|
|
InputFilter.grid_density=16
|
|
|
|
;######### RESAMPLER CONFIG ############
|
|
;## Resamples the input data.
|
|
|
|
;#implementation: Pass_Through disables this block
|
|
Resampler.implementation=Pass_Through
|
|
|
|
;#dump: Dump the filtered data to a file.
|
|
InputFilter.dump=false
|
|
;#dump_filename: Log path and filename.
|
|
InputFilter.dump=../data/resampler.dat
|
|
|
|
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
|
Resampler.item_type=gr_complex
|
|
|
|
;#sample_freq_in: the sample frequency of the input signal
|
|
Resampler.sample_freq_in=4000000
|
|
|
|
;#sample_freq_out: the desired sample frequency of the output signal
|
|
Resampler.sample_freq_out=4000000
|
|
|
|
|
|
;######### CHANNELS GLOBAL CONFIG ############
|
|
;#count: Number of available satellite channels.
|
|
Channels.count=1
|
|
Channels.in_acquisition=1
|
|
|
|
;######### CHANNEL 0 CONFIG ############
|
|
Channel0.system=Galileo
|
|
Channel0.signal=1B
|
|
Channel0.satellite=12
|
|
Channel0.repeat_satellite=true
|
|
|
|
;######### CHANNEL 1 CONFIG ############
|
|
|
|
Channel1.system=Galileo
|
|
Channel1.signal=1B
|
|
Channel1.satellite=11
|
|
Channel1.repeat_satellite=true
|
|
|
|
;######### ACQUISITION GLOBAL CONFIG ############
|
|
|
|
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
|
|
Acquisition.dump=false
|
|
;#filename: Log path and filename
|
|
Acquisition.dump_filename=./acq_dump.dat
|
|
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
|
|
Acquisition.item_type=gr_complex
|
|
;#if: Signal intermediate frequency in [Hz]
|
|
Acquisition.if=0
|
|
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
|
|
Acquisition.sampled_ms=4
|
|
|
|
;######### ACQUISITION CHANNELS CONFIG ######
|
|
|
|
;######### ACQUISITION CH 0 CONFIG ############
|
|
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
|
|
Acquisition0.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition
|
|
;#threshold: Acquisition threshold
|
|
Acquisition0.threshold=50
|
|
;#doppler_max: Maximum expected Doppler shift [Hz]
|
|
Acquisition0.doppler_max=10000
|
|
;#doppler_max: Doppler step in the grid search [Hz]
|
|
Acquisition0.doppler_step=125
|
|
;#cboc: Only for [Galileo_E1_PCPS_Ambiguous_Acquisition]. This option allows you to choose between acquiring with CBOC signal [true] or sinboc(1,1) signal [false]
|
|
Acquisition0.cboc=true
|
|
|
|
;######### ACQUISITION CH 1 CONFIG ############
|
|
Acquisition1.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition
|
|
Acquisition1.threshold=50
|
|
Acquisition1.doppler_max=10000
|
|
Acquisition1.doppler_step=125
|
|
Acquisition1.cboc=true
|
|
|
|
|
|
;######### TRACKING GLOBAL CONFIG ############
|
|
|
|
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking] or [GPS_L1_CA_TCP_CONNECTOR_Tracking] or [Galileo_E1_DLL_PLL_VEML_Tracking] or [Galileo_E1_TCP_CONNECTOR_Tracking]
|
|
Tracking.implementation=Galileo_E1_TCP_CONNECTOR_Tracking
|
|
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
|
|
Tracking.item_type=gr_complex
|
|
|
|
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
|
|
Tracking.if=0
|
|
|
|
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
|
|
Tracking.dump=false
|
|
|
|
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
|
|
Tracking.dump_filename=../data/veml_tracking_ch_
|
|
|
|
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
|
|
Tracking.pll_bw_hz=30.0;
|
|
|
|
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
|
|
Tracking.dll_bw_hz=2.0;
|
|
|
|
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
|
|
Tracking.fll_bw_hz=10.0;
|
|
|
|
;#order: PLL/DLL loop filter order [2] or [3]
|
|
Tracking.order=3;
|
|
|
|
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo
|
|
Tracking.early_late_space_chips=0.15;
|
|
|
|
;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6]
|
|
Tracking.very_early_late_space_chips=0.6;
|
|
|
|
;#port_ch0: local TCP port for channel 0
|
|
Tracking.port_ch0=2070;
|
|
|
|
;######### TELEMETRY DECODER CONFIG ############
|
|
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A.
|
|
TelemetryDecoder.implementation=GPS_L1_CA_Telemetry_Decoder
|
|
TelemetryDecoder.dump=false
|
|
|
|
;######### OBSERVABLES CONFIG ############
|
|
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
|
|
Observables.implementation=GPS_L1_CA_Observables
|
|
|
|
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
|
|
Observables.dump=false
|
|
|
|
;#dump_filename: Log path and filename.
|
|
Observables.dump_filename=./observables.dat
|
|
|
|
|
|
;######### PVT CONFIG ############
|
|
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
|
|
PVT.implementation=GPS_L1_CA_PVT
|
|
|
|
;#averaging_depth: Number of PVT observations in the moving average algorithm
|
|
PVT.averaging_depth=100
|
|
|
|
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
|
|
PVT.flag_averaging=true
|
|
|
|
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
|
|
PVT.output_rate_ms=100;
|
|
|
|
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
|
|
PVT.display_rate_ms=500;
|
|
|
|
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
|
|
PVT.dump=false
|
|
|
|
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
|
|
PVT.dump_filename=./PVT
|
|
|
|
;######### OUTPUT_FILTER CONFIG ############
|
|
;# Receiver output filter: Leave this block disabled in this version
|
|
OutputFilter.implementation=Null_Sink_Output_Filter
|
|
OutputFilter.filename=data/gnss-sdr.dat
|
|
OutputFilter.item_type=gr_complex |