mirrors/gnss-sdr
1
0
Fork 0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-11-09 11:30:03 +00:00
Code Issues Releases Wiki Activity
14e501ffec
gnss-sdr/conf/gnss-sdr_Galileo_E5a.conf
Carles Fernandez a6df9f8c6f Clean configuration files 
Added information on how to retrieve SUPL parameters, and indicators to
userd on where to point to their own file or IP address. Removed unused
parameter wait_for_flowgraph.
2016-05-15 14:27:51 +02:00

336 lines
13 KiB
Plaintext
Raw Blame History

; Default configuration file
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=32000000
;######### SUPL RRLP GPS assistance configuration #####
; Check http://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
;GNSS-SDR.SUPL_gps_enabled=false
;GNSS-SDR.SUPL_read_gps_assistance_xml=false
;GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
;GNSS-SDR.SUPL_gps_ephemeris_port=7275
;GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
;GNSS-SDR.SUPL_gps_acquisition_port=7275
;GNSS-SDR.SUPL_MCC=244
;GNSS-SDR.SUPL_MNS=5
;GNSS-SDR.SUPL_LAC=0x59e2
;GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
SignalSource.filename=/datalogger/signals/ifen/32MS_complex.dat ; <- PUT YOUR FILE HERE
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
;#sampling_frequency: Original Signal sampling frequency in [Hz]
SignalSource.sampling_frequency=32000000
;#freq: RF front-end center frequency in [Hz]
SignalSource.freq=1176450000
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
SignalSource.samples=0
;#repeat: Repeat the processing file. Disable this option in this version
SignalSource.repeat=false
;#dump: Dump the Signal source data to a file. Disable this option in this version
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
;#implementation: Use [Pass_Through] or [Signal_Conditioner]
;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks
;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks
;SignalConditioner.implementation=Signal_Conditioner
SignalConditioner.implementation=Pass_Through
;######### DATA_TYPE_ADAPTER CONFIG ############
;## Changes the type of input data.
;#implementation: [Pass_Through] disables this block
DataTypeAdapter.implementation=Pass_Through
;######### INPUT_FILTER CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
;InputFilter.implementation=Fir_Filter
;InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.implementation=Pass_Through
;#dump: Dump the filtered data to a file.
InputFilter.dump=false
;#dump_filename: Log path and filename.
InputFilter.dump_filename=../data/input_filter.dat
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
;#These options are based on parameters of gnuradio's function: gr_remez.
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges, the desired reponse on those bands, and the weight given to the error in those bands.
;#input_item_type: Type and resolution for input signal samples.
InputFilter.input_item_type=gr_complex
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
InputFilter.output_item_type=gr_complex
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
InputFilter.taps_item_type=float
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
InputFilter.number_of_taps=5
;#number_of _bands: Number of frequency bands in the filter.
InputFilter.number_of_bands=2
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
;#The number of band_begin and band_end elements must match the number of bands
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.45
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
;#The number of ampl_begin and ampl_end elements must match the number of bands
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
;#band_error: weighting applied to each band (usually 1).
;#The number of band_error elements must match the number of bands
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
InputFilter.filter_type=bandpass
;#grid_density: determines how accurately the filter will be constructed.
;The minimum value is 16; higher values are slower to compute the filter.
InputFilter.grid_density=16
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz
InputFilter.sampling_frequency=32000000
InputFilter.IF=0
;######### RESAMPLER CONFIG ############
;## Resamples the input data.
;#implementation: Use [Pass_Through] or [Direct_Resampler]
;#[Pass_Through] disables this block
;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation
;Resampler.implementation=Direct_Resampler
Resampler.implementation=Pass_Through
;#dump: Dump the resamplered data to a file.
Resampler.dump=false
;#dump_filename: Log path and filename.
Resampler.dump_filename=../data/resampler.dat
;#item_type: Type and resolution for each of the signal samples.
Resampler.item_type=gr_complex
;#sample_freq_in: the sample frequency of the input signal
Resampler.sample_freq_in=8000000
;#sample_freq_out: the desired sample frequency of the output signal
Resampler.sample_freq_out=4000000
;######### CHANNELS GLOBAL CONFIG ############
;#count: Number of available satellite channels.
Channels_5X.count=1
;#in_acquisition: Number of channels simultaneously acquiring
Channels.in_acquisition=1
;#system: GPS, GLONASS, Galileo, SBAS or Compass
;#if the option is disabled by default is assigned GPS
Channel.signal=5X
;######### SPECIFIC CHANNELS CONFIG ######
;#The following options are specific to each channel and overwrite the generic options
;######### CHANNEL 0 CONFIG ############
Channel0.signal=5X
;#satellite: Satellite PRN ID for this channel. Disable this option to random search
Channel0.satellite=19
;Channel0.repeat_satellite=true
;######### CHANNEL 1 CONFIG ############
;Channel1.system=Galileo
;Channel1.signal=5Q
;Channel1.satellite=12
;######### CHANNEL 2 CONFIG ############
;Channel2.system=Galileo
;Channel2.signal=5Q
;Channel2.satellite=11
;######### CHANNEL 3 CONFIG ############
;Channel3.system=Galileo
;Channel3.signal=5Q
;Channel3.satellite=20
;######### ACQUISITION GLOBAL CONFIG ############
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
Acquisition_5X.dump=true
;#filename: Log path and filename
Acquisition_5X.dump_filename=./acq_dump.dat
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
Acquisition_5X.item_type=gr_complex
;#if: Signal intermediate frequency in [Hz]
Acquisition_5X.if=0
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
Acquisition_5X.coherent_integration_time_ms=1
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
Acquisition_5X.implementation=Galileo_E5a_Noncoherent_IQ_Acquisition_CAF
;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
Acquisition_5X.threshold=0.001
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
Acquisition_5X.pfa=0.0003
;#doppler_max: Maximum expected Doppler shift [Hz]
Acquisition_5X.doppler_max=10000
;#doppler_max: Doppler step in the grid search [Hz]
Acquisition_5X.doppler_step=250
;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
;maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] (should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
Acquisition_5X.bit_transition_flag=false
;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
Acquisition_5X.max_dwells=1
;#CAF filter: **Only for E5a** Resolves doppler ambiguity averaging the specified BW in the winner code delay. If set to 0 CAF filter is desactivated. Recommended value 3000 Hz
Acquisition_5X.CAF_window_hz=0
;#Zero_padding: **Only for E5a** Avoids power loss and doppler ambiguity in bit transitions by correlating one code with twice the input data length, ensuring that at least one full code is present without transitions.
;#If set to 1 it is ON, if set to 0 it is OFF.
Acquisition_5X.Zero_padding=0
;######### TRACKING GLOBAL CONFIG ############
;#implementation: Selected tracking algorithm:
Tracking_5X.implementation=Galileo_E5a_DLL_PLL_Tracking
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
Tracking_5X.item_type=gr_complex
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
Tracking_5X.if=0
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
Tracking_5X.dump=true
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
Tracking_5X.dump_filename=./tracking_ch_
;#pll_bw_hz_init: **Only for E5a** PLL loop filter bandwidth during initialization [Hz]
Tracking_5X.pll_bw_hz_init=20.0;
;#dll_bw_hz_init: **Only for E5a** DLL loop filter bandwidth during initialization [Hz]
Tracking_5X.dll_bw_hz_init=20.0;
;#dll_ti_ms: **Only for E5a** loop filter integration time after initialization (secondary code delay search)[ms]
;Tracking_5X.ti_ms=3;
Tracking_5X.ti_ms=1;
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
;Tracking.pll_bw_hz=5.0;
Tracking_5X.pll_bw_hz=20.0;
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
;Tracking.dll_bw_hz=2.0;
Tracking_5X.dll_bw_hz=20.0;
;#order: PLL/DLL loop filter order [2] or [3]
Tracking_5X.order=2;
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
Tracking_5X.early_late_space_chips=0.5;
;######### TELEMETRY DECODER CONFIG ############
;#implementation:
TelemetryDecoder_5X.implementation=Galileo_E5a_Telemetry_Decoder
TelemetryDecoder_5X.dump=false
;######### OBSERVABLES CONFIG ############
;#implementation:
;Use [Galileo_E1B_Observables] for E5a also.
Observables.implementation=Galileo_E1B_Observables
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
Observables.dump=false
;#dump_filename: Log path and filename.
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
;#implementation: Position Velocity and Time (PVT) implementation algorithm:
;Use [GALILEO_E1_PVT] for E5a also.
PVT.implementation=GALILEO_E1_PVT
;#averaging_depth: Number of PVT observations in the moving average algorithm
PVT.averaging_depth=100
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
PVT.flag_averaging=true
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time [ms]
PVT.output_rate_ms=100
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
PVT.display_rate_ms=500
;# KML, GeoJSON, NMEA and RTCM output configuration
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
PVT.dump_filename=./PVT
;#nmea_dump_filename: NMEA log path and filename
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
PVT.flag_nmea_tty_port=true;
;#nmea_dump_devname: serial device descriptor for NMEA logging
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
PVT.dump=false
Reference in New Issue View Git Blame Copy Permalink