; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/

; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;

[GNSS-SDR]

;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=50000000

;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false

;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/archive/BDS3_datasets/BdsB3IStr01.dat
SignalSource.item_type=byte
SignalSource.sampling_frequency=50000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.dump=false
SignalSource.enable_throttle_control=false
;SignalSource.samples=200000

;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
DataTypeAdapter.implementation=Byte_To_Short
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.input_item_type=short
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.70
InputFilter.band2_begin=0.80
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=50000000
InputFilter.IF=12500000
InputFilter.dump = false
InputFilter.dump_filename=/home/dmiralles/Documents/gnss-sdr/src/tests/signal_samples/BdsB3IStr01_fs50e6_if0_4ms.dat
Resampler.implementation=Pass_Through
Resampler.sample_freq_in=50000000
Resampler.sample_freq_out=50000000
Resampler.item_type=gr_complex


;######### CHANNELS GLOBAL CONFIG ############
Channels_B3.count=10
Channels.in_acquisition=1
Channel.signal=B3

Channel0.satellite = 6;
Channel1.satellite = 23;
Channel2.satellite = 16;
Channel3.satellite = 18;
Channel4.satellite = 7;
Channel5.satellite = 1;
Channel6.satellite = 2;
Channel7.satellite = 3;
Channel8.satellite = 4;
Channel9.satellite = 5;

;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_B3.implementation=BEIDOU_B3I_PCPS_Acquisition
Acquisition_B3.item_type=gr_complex
Acquisition_B3.coherent_integration_time_ms=3
Acquisition_B3.max_dwells = 2
Acquisition_B3.threshold=0.0005
Acquisition_B3.doppler_max=10000
Acquisition_B3.doppler_step=100
Acquisition_B3.dump=false
Acquisition_B3.dump_filename=./bds_acq

;######### TRACKING GLOBAL CONFIG ############
Tracking_B3.implementation=BEIDOU_B3I_DLL_PLL_Tracking
Tracking_B3.item_type=gr_complex
Tracking_B3.pll_bw_hz=40.0;
Tracking_B3.dll_bw_hz=4.0;
Tracking_B3.pll_bw_narrow_hz=20.0;
Tracking_B3.dll_bw_narrow_hz=3.0;
Tracking_B3.dump=false;
Tracking_B3.dump_filename=./epl_tracking_ch_

;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_B3.implementation=BEIDOU_B3I_Telemetry_Decoder
TelemetryDecoder_B3.dump=false


;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=true
Observables.dump_filename=./observables.dat


;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=Single  ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=OFF ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
PVT.flag_nmea_tty_port=false;
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=true