; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;

[GNSS-SDR]

;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [Sps].
GNSS-SDR.internal_fs_sps=13250000 ;//66.25/5
;GNSS-SDR.internal_fs_sps=6625000  ;//66.25/10
;GNSS-SDR.internal_fs_sps=3312500 ;//66.25/20
;GNSS-SDR.internal_fs_sps=2650000  ;//66.25/25

;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Custom_UDP_Signal_Source
SignalSource.item_type=gr_complex
SignalSource.origin_address=0.0.0.0
SignalSource.capture_device=eth0
SignalSource.port=1234
SignalSource.payload_bytes=1472
;SignalSource.sample_type=cbyte
SignalSource.sample_type=c4bits
SignalSource.IQ_swap=false
SignalSource.RF_channels=1
SignalSource.channels_in_udp=2
SignalSource.dump=false
SignalSource.dump_filename=./signal_source.dat


;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Pass_Through
;SignalConditioner0.implementation=Pass_Through
;SignalConditioner1.implementation=Pass_Through

;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=8
Channels.in_acquisition=1

;# CHANNEL CONNECTION
Channel.signal=1C
Channel0.RF_channel_ID=0
Channel1.RF_channel_ID=0
Channel2.RF_channel_ID=0
Channel3.RF_channel_ID=0
Channel4.RF_channel_ID=0
Channel5.RF_channel_ID=0
Channel6.RF_channel_ID=0
Channel7.RF_channel_ID=0
Channel8.RF_channel_ID=1
Channel9.RF_channel_ID=1

;Channel0.signal=1C
;Channel1.RF_channel_ID=1
;Channel1.signal=1C

;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.item_type=gr_complex
Acquisition_1C.threshold=17
Acquisition_1C.use_CFAR_algorithm=false
Acquisition_1C.blocking=false
Acquisition_1C.doppler_max=5000
Acquisition_1C.doppler_step=250
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=./acq_dump.dat


;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.dump=false
Tracking_1C.dump_filename=./tracking_ch_
Tracking_1C.pll_bw_hz=35.0;
Tracking_1C.dll_bw_hz=2.0;
Tracking_1C.early_late_space_chips=0.5;


;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false


;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat


;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=PPP_Static  ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
PVT.flag_nmea_tty_port=false;
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=false