; Configuration file for using USRP X300 as a RF front-end for Galileo E1 signals.
; Set SignalSource.device_address to the IP address of your device
; and run:
; gnss-sdr --config_file=/path/to/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf
;

[GNSS-SDR]

;######### GLOBAL OPTIONS ##################
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000

;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false

;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=UHD_Signal_Source
SignalSource.item_type=gr_complex
SignalSource.device_address=192.168.40.2
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
SignalSource.gain=50
SignalSource.subdevice=A:0
SignalSource.samples=0
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
SignalSource.enable_throttle_control=false

;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Pass_Through

;######### CHANNELS GLOBAL CONFIG ######
Channels_1B.count=4
Channels.in_acquisition=1
Channel.signal=1B

;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1B.dump=false
Acquisition_1B.dump_filename=./acq_dump.dat
Acquisition_1B.item_type=gr_complex
Acquisition_1B.if=0
Acquisition_1B.sampled_ms=4
Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition
;Acquisition_1B.threshold=1
Acquisition_1B.pfa=0.000008
Acquisition_1B.doppler_max=6000
Acquisition_1B.doppler_step=250
Acquisition_1B.cboc=false

;######### TRACKING GLOBAL CONFIG ############
Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking
Tracking_1B.item_type=gr_complex
Tracking_1B.if=0
Tracking_1B.dump=false
Tracking_1B.dump_filename=../data/veml_tracking_ch_
Tracking_1B.pll_bw_hz=20.0;
Tracking_1B.dll_bw_hz=2.0;
Tracking_1B.fll_bw_hz=10.0;
Tracking_1B.order=3;
Tracking_1B.early_late_space_chips=0.15;
Tracking_1B.very_early_late_space_chips=0.6;

;######### TELEMETRY DECODER CONFIG ############
TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder
TelemetryDecoder_1B.dump=false

;######### OBSERVABLES CONFIG ############
Observables.implementation=Galileo_E1B_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat

;######### PVT CONFIG ############
PVT.implementation=GALILEO_E1_PVT
PVT.averaging_depth=100
PVT.flag_averaging=false
PVT.output_rate_ms=100;
PVT.display_rate_ms=500;
PVT.dump=false
PVT.dump_filename=./PVT

;######### OUTPUT_FILTER CONFIG ############
OutputFilter.implementation=Null_Sink_Output_Filter
OutputFilter.item_type=gr_complex