diff --git a/conf/gnss-sdr_GPS_L1_bladeRF.conf b/conf/gnss-sdr_GPS_L1_bladeRF.conf
new file mode 100644
index 000000000..84fe13d8b
--- /dev/null
+++ b/conf/gnss-sdr_GPS_L1_bladeRF.conf
@@ -0,0 +1,110 @@
+[GNSS-SDR]
+
+;######### GLOBAL OPTIONS ##################
+GNSS-SDR.internal_fs_sps=2000000
+
+;######### SIGNAL_SOURCE CONFIG ############
+SignalSource.implementation=Osmosdr_Signal_Source
+SignalSource.item_type=gr_complex
+SignalSource.sampling_frequency=2000000
+SignalSource.freq=1575420000
+;# RF Gain: LNA Gain {0, 3, 6}
+SignalSource.gain=6
+;# IF Gain: N/A
+SignalSource.rf_gain=40
+;# BB Gain: RX VGA1 + VGA2 [5, 60]
+SignalSource.if_gain=48
+SignalSource.AGC_enabled=false
+SignalSource.samples=0
+SignalSource.repeat=false
+;# Next line enables the bladeRF
+SignalSource.osmosdr_args=bladerf=0
+SignalSource.enable_throttle_control=false
+SignalSource.dump=false
+SignalSource.dump_filename=./signal_source.dat
+
+;######### SIGNAL_CONDITIONER CONFIG ############
+SignalConditioner.implementation=Signal_Conditioner
+
+;######### DATA_TYPE_ADAPTER CONFIG ############
+DataTypeAdapter.implementation=Pass_Through
+
+;######### INPUT_FILTER CONFIG ############
+InputFilter.implementation=Freq_Xlating_Fir_Filter
+InputFilter.decimation_factor=1
+InputFilter.input_item_type=gr_complex
+InputFilter.output_item_type=gr_complex
+InputFilter.taps_item_type=float
+InputFilter.number_of_taps=5
+InputFilter.number_of_bands=2
+InputFilter.band1_begin=0.0
+InputFilter.band1_end=0.85
+InputFilter.band2_begin=0.9
+InputFilter.band2_end=1.0
+InputFilter.ampl1_begin=1.0
+InputFilter.ampl1_end=1.0
+InputFilter.ampl2_begin=0.0
+InputFilter.ampl2_end=0.0
+InputFilter.band1_error=1.0
+InputFilter.band2_error=1.0
+InputFilter.filter_type=bandpass
+InputFilter.grid_density=16
+InputFilter.dump=false
+InputFilter.dump_filename=../data/input_filter.dat
+
+;######### RESAMPLER CONFIG ############
+Resampler.implementation=Pass_Through
+
+;######### CHANNELS GLOBAL CONFIG ############
+Channels_1C.count=8
+Channels.in_acquisition=1
+Channel.signal=1C
+
+;######### ACQUISITION GLOBAL CONFIG ############
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
+Acquisition_1C.item_type=gr_complex
+Acquisition_1C.if=0
+Acquisition_1C.sampled_ms=1
+Acquisition_1C.threshold=0.015
+Acquisition_1C.doppler_max=10000
+Acquisition_1C.doppler_min=-10000
+Acquisition_1C.doppler_step=500
+Acquisition_1C.max_dwells=15
+Acquisition_1C.dump=false
+Acquisition_1C.dump_filename=./acq_dump.dat
+
+;######### TRACKING GLOBAL CONFIG ############
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
+Tracking_1C.item_type=gr_complex
+Tracking_1C.if=0
+Tracking_1C.pll_bw_hz=40.0;
+Tracking_1C.dll_bw_hz=2.0;
+Tracking_1C.order=3;
+Tracking_1C.early_late_space_chips=0.5;
+Tracking_1C.dump=false
+Tracking_1C.dump_filename=./tracking_ch_
+
+;######### TELEMETRY DECODER GPS CONFIG ############
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.dump=false
+
+;######### OBSERVABLES CONFIG ############
+#Observables.implementation=GPS_L1_CA_Observables
+Observables.implementation=Hybrid_Observables
+Observables.dump=false
+Observables.dump_filename=./observables.dat
+
+;######### PVT CONFIG ############
+;PVT.implementation=RTKLIB_PVT
+PVT.positioning_mode=Single
+PVT.output_rate_ms=100
+PVT.display_rate_ms=500
+PVT.iono_model=Broadcast
+PVT.trop_model=Saastamoinen
+PVT.flag_rtcm_server=false
+PVT.flag_rtcm_tty_port=false
+PVT.rtcm_dump_devname=/dev/pts/1
+PVT.rtcm_tcp_port=2101
+PVT.rtcm_MT1019_rate_ms=5000
+PVT.rtcm_MT1077_rate_ms=1000
+PVT.rinex_version=2
diff --git a/src/algorithms/signal_source/adapters/osmosdr_signal_source.cc b/src/algorithms/signal_source/adapters/osmosdr_signal_source.cc
index c3c1da374..d4e314911 100644
--- a/src/algorithms/signal_source/adapters/osmosdr_signal_source.cc
+++ b/src/algorithms/signal_source/adapters/osmosdr_signal_source.cc
@@ -78,13 +78,13 @@ OsmosdrSignalSource::OsmosdrSignalSource(ConfigurationInterface* configuration,
             // 1. Make the driver instance
             OsmosdrSignalSource::driver_instance();
 
-			// For LimeSDR: Set RX antenna
-			if (!antenna_.empty())
-				{
-					osmosdr_source_->set_antenna(antenna_, 0);
-					std::cout << boost::format("Set RX Antenna : %s") % (osmosdr_source_->get_antenna(0)) << std::endl ;
-					LOG(INFO) << boost::format("Set RX Antenna : %s") % (osmosdr_source_->get_antenna(0));
-				}
+            // For LimeSDR: Set RX antenna
+            if (!antenna_.empty())
+                {
+                    osmosdr_source_->set_antenna(antenna_, 0);
+                    std::cout << boost::format("Set RX Antenna : %s") % (osmosdr_source_->get_antenna(0)) << std::endl ;
+                    LOG(INFO) << boost::format("Set RX Antenna : %s") % (osmosdr_source_->get_antenna(0));
+                }
 
             // 2 set sampling rate
             osmosdr_source_->set_sample_rate(sample_rate_);
@@ -97,7 +97,7 @@ OsmosdrSignalSource::OsmosdrSignalSource(ConfigurationInterface* configuration,
             LOG(INFO) << boost::format("Actual RX Freq: %f [Hz]...") % (osmosdr_source_->get_center_freq());
 
             // TODO: Assign the remnant IF from the PLL tune error
-            std::cout << boost::format("PLL Frequency tune error %f [Hz]...") % (osmosdr_source_->get_center_freq() - freq_) ;
+            std::cout << boost::format("PLL Frequency tune error %f [Hz]...") % (osmosdr_source_->get_center_freq() - freq_) << std::endl;
             LOG(INFO) <<  boost::format("PLL Frequency tune error %f [Hz]...") % (osmosdr_source_->get_center_freq() - freq_) ;
 
             // 4. set rx gain
@@ -113,9 +113,22 @@ OsmosdrSignalSource::OsmosdrSignalSource(ConfigurationInterface* configuration,
                     osmosdr_source_->set_gain(gain_, 0);
                     osmosdr_source_->set_if_gain(rf_gain_, 0);
                     osmosdr_source_->set_bb_gain(if_gain_, 0);
-                    std::cout << boost::format("Actual RX Gain: %f dB...") % osmosdr_source_->get_gain() << std::endl;
-                    LOG(INFO) << boost::format("Actual RX Gain: %f dB...") % osmosdr_source_->get_gain();
+                    if (!osmosdr_args_.empty() && (osmosdr_args_.find("bladerf") != std::string::npos))
+                        {
+                            std::cout << boost::format("Actual LNA Gain: %f dB...") % osmosdr_source_->get_gain("LNA",0) << std::endl;
+                            std::cout << boost::format("Actual VGA1 Gain: %f dB...") % osmosdr_source_->get_gain("VGA1",0) << std::endl;
+                            std::cout << boost::format("Actual VGA2 Gain: %f dB...") % osmosdr_source_->get_gain("VGA2",0) << std::endl;
+    
+                        }
+                    else
+                        {
+                            std::cout << boost::format("Actual RX Gain: %f dB...") % osmosdr_source_->get_gain() << std::endl;
+                            LOG(INFO) << boost::format("Actual RX Gain: %f dB...") % osmosdr_source_->get_gain();
+                        }
                 }
+            
+            // Get actual bandwidth
+            std::cout << boost::format("Actual Bandwidth: %f [Hz]...") % osmosdr_source_->get_bandwidth(0) << std::endl;
         }
     else
         {