mirror of
https://github.com/gnss-sdr/gnss-sdr
synced 2025-04-02 16:57:03 +00:00
Improve changelog
This commit is contained in:
parent
8044564117
commit
4e741fe0b4
@ -69,18 +69,19 @@ All notable changes to GNSS-SDR will be documented in this file.
|
||||
- Fixed large GLONASS velocity errors and the extended correlator when using the
|
||||
`GLONASS_L1_CA_DLL_PLL_C_Aid_Tracking` and
|
||||
`GLONASS_L2_CA_DLL_PLL_C_Aid_Tracking` implementations.
|
||||
- Added a over-the-wire sample format (that is, the format used between the
|
||||
device and the UHD) configuration parameter for the `UHD_Signal_Source`, thus
|
||||
allowing to select the `sc8` format instead of the default `sc16`. This would
|
||||
reduce the dynamic range and increase quantization noise, but also reduce the
|
||||
load on the data link and thus allow more bandwidth.
|
||||
- The `UHD_Signal_Source` learned a new parameter `otw_format` for setting the
|
||||
[over-the-wire data format](https://files.ettus.com/manual/page_configuration.html#config_stream_args_otw_format)
|
||||
(that is, the format used between the device and the UHD) in some devices,
|
||||
thus allowing to select the `sc8` format instead of the default `sc16`. This
|
||||
would reduce the dynamic range and increase quantization noise, but also
|
||||
reduce the load on the data link and thus allow more bandwidth.
|
||||
- The `UHD_Signal_Source` learned another two optional parameters:
|
||||
`device_recv_frame_size` and `device_num_recv_frames` for overriding
|
||||
[transport layer defaults](https://files.ettus.com/manual/page_transport.html).
|
||||
- Added gain setting and reading for the XTRX board when using the
|
||||
`Osmosdr_Signal_Source` implementation of a `SignalSource`.
|
||||
- The `Osmosdr_Signal_Source` implementation learned a new parameter `if_bw` to
|
||||
manually set the bandwidth of the bandpass filter on the radio frontend.
|
||||
- The `UHD_Signal_Source` learned two new optional parameters
|
||||
`device_recv_frame_size` and `device_num_recv_frames` for overriding
|
||||
[transport layer defaults](https://files.ettus.com/manual/page_transport.html).
|
||||
- The new configuration parameter `Channels_XX.RF_channel_ID` allows to specify
|
||||
the signal source per channel group.
|
||||
- Allowed the CMake project to be a sub-project.
|
||||
|
Loading…
x
Reference in New Issue
Block a user