Code cleaning and config simplifications

conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1a.conf

@@ -1,437 +0,0 @@
-; Default configuration file
-; You can define your own receiver and invoke it by doing
-; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
-;
-
-[GNSS-SDR]
-
-;######### GLOBAL OPTIONS ##################
-;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
-GNSS-SDR.internal_fs_hz=5000000
-
-;######### CONTROL_THREAD CONFIG ############
-ControlThread.wait_for_flowgraph=false
-
-;######### SUPL RRLP GPS assistance configuration #####
-GNSS-SDR.SUPL_gps_enabled=false
-GNSS-SDR.SUPL_read_gps_assistance_xml=true
-GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
-GNSS-SDR.SUPL_gps_ephemeris_port=7275
-GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
-GNSS-SDR.SUPL_gps_acquisition_port=7275
-GNSS-SDR.SUPL_MCC=244
-GNSS-SDR.SUPL_MNS=5
-GNSS-SDR.SUPL_LAC=0x59e2
-GNSS-SDR.SUPL_CI=0x31b0
-
-;######### SIGNAL_SOURCE CONFIG ############
-;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
-SignalSource.implementation=Flexiband_Signal_Source
-
-SignalSource.flag_read_file=true
-;SignalSource.signal_file=/datalogger/captures/eclipse/eclipse_IIIa_2.bin
-SignalSource.signal_file=/media/javier/SISTEMA/signals/front-end fraunhoffer/L125_III1b_210s.usb
-
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-SignalSource.item_type=gr_complex
-
-;# FPGA firmware file
-SignalSource.firmware_file=flexiband_III-1b.bit
-
-;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file
-SignalSource.RF_channels=2
-
-;#frontend channels gain. Not usable yet!
-SignalSource.gain1=0
-SignalSource.gain2=0
-SignalSource.gain3=0
-
-;#frontend channels AGC
-SignalSource.AGC=true
-
-;# USB 3.0 packet buffer size (number of SuperSpeed packets)
-SignalSource.usb_packet_buffer=128
-
-;######################################################
-;######### RF CHANNEL 0 SIGNAL CONDITIONER ############
-;######################################################
-
-;######### SIGNAL_CONDITIONER 0 CONFIG ############
-;## It holds blocks to change data type, filter and resample input data.
-SignalConditioner0.implementation=Signal_Conditioner
-
-;######### DATA_TYPE_ADAPTER 0 CONFIG ############
-DataTypeAdapter0.implementation=Pass_Through
-DataTypeAdapter0.item_type=gr_complex
-
-;######### INPUT_FILTER 0 CONFIG ############
-;## Filter the input data. Can be combined with frequency translation for IF signals
-
-;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
-;#[Pass_Through] disables this block
-;#[Fir_Filter] enables a FIR Filter
-;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
-
-InputFilter0.implementation=Freq_Xlating_Fir_Filter
-
-;#dump: Dump the filtered data to a file.
-InputFilter0.dump=true
-
-;#dump_filename: Log path and filename.
-InputFilter0.dump_filename=../data/input_filter_ch0.dat
-
-;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
-;#These options are based on parameters of gnuradio's function: gr_remez.
-;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
-;#the desired reponse on those bands, and the weight given to the error in those bands.
-
-;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
-InputFilter0.input_item_type=gr_complex
-
-;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
-InputFilter0.output_item_type=gr_complex
-
-;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
-InputFilter0.taps_item_type=float
-
-;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
-InputFilter0.number_of_taps=5
-
-;#number_of _bands: Number of frequency bands in the filter.
-InputFilter0.number_of_bands=2
-
-;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
-;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
-;#The number of band_begin and band_end elements must match the number of bands
-
-InputFilter0.band1_begin=0.0
-InputFilter0.band1_end=0.45
-InputFilter0.band2_begin=0.55
-InputFilter0.band2_end=1.0
-
-;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
-;#The number of ampl_begin and ampl_end elements must match the number of bands
-
-InputFilter0.ampl1_begin=1.0
-InputFilter0.ampl1_end=1.0
-InputFilter0.ampl2_begin=0.0
-InputFilter0.ampl2_end=0.0
-
-;#band_error: weighting applied to each band (usually 1).
-;#The number of band_error elements must match the number of bands
-InputFilter0.band1_error=1.0
-InputFilter0.band2_error=1.0
-
-;#filter_type: one of "bandpass", "hilbert" or "differentiator"
-InputFilter0.filter_type=bandpass
-
-;#grid_density: determines how accurately the filter will be constructed.
-;The minimum value is 16; higher values are slower to compute the filter.
-InputFilter0.grid_density=16
-
-;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
-;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
-;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
-; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
-InputFilter0.sampling_frequency=20000000
-;# IF deviation due to front-end LO inaccuracies [HZ]
-;#InputFilter0.IF=-205000
-InputFilter0.IF=0
-
-;# Decimation factor after the frequency tranaslating block
-InputFilter0.decimation_factor=4
-
-;######### RESAMPLER CONFIG 0 ############
-;## Resamples the input data.
-Resampler0.implementation=Pass_Through
-
-;######################################################
-;######### RF CHANNEL 1 SIGNAL CONDITIONER ############
-;######################################################
-
-;######### SIGNAL_CONDITIONER 1 CONFIG ############
-;## It holds blocks to change data type, filter and resample input data.
-SignalConditioner1.implementation=Signal_Conditioner
-
-;######### DATA_TYPE_ADAPTER 1 CONFIG ############
-DataTypeAdapter1.implementation=Pass_Through
-DataTypeAdapter1.item_type=gr_complex
-
-;######### INPUT_FILTER 0 CONFIG ############
-;## Filter the input data. Can be combined with frequency translation for IF signals
-
-;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
-;#[Pass_Through] disables this block
-;#[Fir_Filter] enables a FIR Filter
-;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
-
-InputFilter1.implementation=Freq_Xlating_Fir_Filter
-
-;#dump: Dump the filtered data to a file.
-InputFilter1.dump=true
-
-;#dump_filename: Log path and filename.
-InputFilter1.dump_filename=../data/input_filter_ch1.dat
-
-;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
-;#These options are based on parameters of gnuradio's function: gr_remez.
-;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges,
-;#the desired reponse on those bands, and the weight given to the error in those bands.
-
-;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
-InputFilter1.input_item_type=gr_complex
-
-;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
-InputFilter1.output_item_type=gr_complex
-
-;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
-InputFilter1.taps_item_type=float
-
-;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
-InputFilter1.number_of_taps=5
-
-;#number_of _bands: Number of frequency bands in the filter.
-InputFilter1.number_of_bands=2
-
-;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
-;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
-;#The number of band_begin and band_end elements must match the number of bands
-
-InputFilter1.band1_begin=0.0
-InputFilter1.band1_end=0.45
-InputFilter1.band2_begin=0.55
-InputFilter1.band2_end=1.0
-
-;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
-;#The number of ampl_begin and ampl_end elements must match the number of bands
-
-InputFilter1.ampl1_begin=1.0
-InputFilter1.ampl1_end=1.0
-InputFilter1.ampl2_begin=0.0
-InputFilter1.ampl2_end=0.0
-
-;#band_error: weighting applied to each band (usually 1).
-;#The number of band_error elements must match the number of bands
-InputFilter1.band1_error=1.0
-InputFilter1.band2_error=1.0
-
-;#filter_type: one of "bandpass", "hilbert" or "differentiator"
-InputFilter1.filter_type=bandpass
-
-;#grid_density: determines how accurately the filter will be constructed.
-;The minimum value is 16; higher values are slower to compute the filter.
-InputFilter1.grid_density=16
-
-;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
-;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz
-;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
-; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
-InputFilter1.sampling_frequency=20000000
-;# IF deviation due to front-end LO inaccuracies [HZ]
-InputFilter1.IF=-100000
-
-;# Decimation factor after the frequency tranaslating block
-InputFilter1.decimation_factor=4
-
-
-;######### RESAMPLER CONFIG 1 ############
-;## Resamples the input data.
-Resampler1.implementation=Pass_Through
-
-;######### SIGNAL_CONDITIONER 2 CONFIG ############
-;## It holds blocks to change data type, filter and resample input data.
-SignalConditioner2.implementation=Pass_Through
-
-;######### DATA_TYPE_ADAPTER 2 CONFIG ############
-DataTypeAdapter2.implementation=Pass_Through
-DataTypeAdapter2.item_type=gr_complex
-
-;######### INPUT_FILTER 2 CONFIG ############
-InputFilter2.implementation=Pass_Through
-
-;#dump: Dump the filtered data to a file.
-InputFilter2.dump=false
-
-;#dump_filename: Log path and filename.
-InputFilter2.dump_filename=../data/input_filter.dat
-
-;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
-InputFilter2.input_item_type=gr_complex
-
-;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
-InputFilter2.output_item_type=gr_complex
-
-;######### RESAMPLER CONFIG 2 ############
-;## Resamples the input data.
-Resampler2.implementation=Pass_Through
-
-
-;######### CHANNELS GLOBAL CONFIG ############
-;#count: Number of available GPS satellite channels.
-Channels_1C.count=1
-Channels_2S.count=7
-
-;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
-Channels.in_acquisition=1
-
-;# signal:
-;# "1C" GPS L1 C/A
-;# "2S" GPS L2 L2C (M)
-;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL)
-;# "5X" GALILEO E5a I+Q
-
-;# CHANNEL CONNECTION
-Channel0.RF_channel_ID=0
-
-Channel1.RF_channel_ID=1
-Channel2.RF_channel_ID=0
-Channel3.RF_channel_ID=0
-Channel4.RF_channel_ID=0
-Channel5.RF_channel_ID=0
-Channel6.RF_channel_ID=0
-Channel7.RF_channel_ID=0
-
-
-;######### SPECIFIC CHANNELS CONFIG ######
-;#The following options are specific to each channel and overwrite the generic options
-
-;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
-Acquisition_1C0.dump=false
-;#filename: Log path and filename
-Acquisition_1C0.dump_filename=./acq_dump.dat
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_1C0.item_type=gr_complex
-;#if: Signal intermediate frequency in [Hz]
-Acquisition_1C0.if=0
-;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_1C0.coherent_integration_time_ms=1
-;#implementation: Acquisition algorithm selection for this channel:
-Acquisition_1C0.implementation=GPS_L1_CA_PCPS_Acquisition
-;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
-Acquisition_1C0.threshold=0.002
-;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-;Acquisition_1C0.pfa=0.0001
-;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_1C0.doppler_max=5000
-;#doppler_max: Doppler step in the grid search [Hz]
-Acquisition_1C0.doppler_step=250
-;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
-;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
-;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
-Acquisition_1C0.bit_transition_flag=false
-;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
-Acquisition_1C0.max_dwells=1
-
-;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
-Acquisition_2S1.dump=false
-;#filename: Log path and filename
-Acquisition_2S1.dump_filename=./acq_dump.dat
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_2S1.item_type=gr_complex
-;#if: Signal intermediate frequency in [Hz]
-Acquisition_2S1.if=0
-;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_2S1.coherent_integration_time_ms=1
-;#implementation: Acquisition algorithm selection for this channel:
-Acquisition_2S1.implementation=GPS_L2_M_PCPS_Acquisition
-;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
-Acquisition_2S1.threshold=0.0005
-;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-;Acquisition_2S1.pfa=0.0001
-;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_2S1.doppler_max=5000
-;#doppler_max: Doppler step in the grid search [Hz]
-Acquisition_2S1.doppler_step=100
-;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
-;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
-;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
-Acquisition_2S1.bit_transition_flag=false
-;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
-Acquisition_2S1.max_dwells=1
-
-
-
-
-;######### TRACKING CONFIG ############
-
-;######### TRACKING CHANNEL 0 CONFIG ############
-Tracking_1C0.implementation=GPS_L1_CA_DLL_PLL_Tracking
-Tracking_1C0.item_type=gr_complex
-Tracking_1C0.if=0
-Tracking_1C0.dump=false
-Tracking_1C0.dump_filename=./tracking_ch_
-Tracking_1C0.pll_bw_hz=40.0;
-Tracking_1C0.dll_bw_hz=3.0;
-Tracking_1C0.order=3;
-Tracking_1C0.early_late_space_chips=0.5;
-
-
-;######### TRACKING CHANNEL 11 CONFIG ############
-Tracking_2S1.implementation=GPS_L2_M_DLL_PLL_Tracking
-Tracking_2S1.item_type=gr_complex
-Tracking_2S1.if=0
-Tracking_2S1.dump=false
-Tracking_2S1.dump_filename=./tracking_ch_
-Tracking_2S1.pll_bw_hz=2.0;
-Tracking_2S1.dll_bw_hz=0.5;
-Tracking_2S1.order=2;
-Tracking_2S1.early_late_space_chips=0.5;
-
-
-;######### TELEMETRY DECODER CONFIG ############
-TelemetryDecoder_1C0.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_1C0.dump=false
-TelemetryDecoder_1C0.decimation_factor=20;
-
-TelemetryDecoder_2S1.implementation=GPS_L2_M_Telemetry_Decoder
-TelemetryDecoder_2S1.dump=false
-TelemetryDecoder_2S1.decimation_factor=1;
-
-
-;######### OBSERVABLES CONFIG ############
-;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
-Observables.implementation=GPS_L1_CA_Observables
-
-;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
-Observables.dump=false
-
-;#dump_filename: Log path and filename.
-Observables.dump_filename=./observables.dat
-
-
-;######### PVT CONFIG ############
-;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
-PVT.implementation=GPS_L1_CA_PVT
-
-;#averaging_depth: Number of PVT observations in the moving average algorithm
-PVT.averaging_depth=10
-
-;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
-PVT.flag_averaging=true
-
-;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
-PVT.output_rate_ms=100
-
-;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
-PVT.display_rate_ms=500
-
-;# KML, GeoJSON, NMEA and RTCM output configuration
-
-;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
-PVT.dump_filename=./PVT
-
-;#nmea_dump_filename: NMEA log path and filename
-PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
-
-;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
-PVT.flag_nmea_tty_port=false;
-
-;#nmea_dump_devname: serial device descriptor for NMEA logging
-PVT.nmea_dump_devname=/dev/pts/4
-
-PVT.flag_rtcm_server=false
-PVT.flag_rtcm_tty_port=false
-PVT.rtcm_dump_devname=/dev/pts/1
-
-;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
-PVT.dump=false

conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf

@@ -7,7 +7,7 @@
 
 ;######### GLOBAL OPTIONS ##################
 ;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
-GNSS-SDR.internal_fs_hz=2500000
+GNSS-SDR.internal_fs_hz=5000000
 
 ;######### CONTROL_THREAD CONFIG ############
 ControlThread.wait_for_flowgraph=false
@@ -77,7 +77,7 @@ InputFilter0.implementation=Freq_Xlating_Fir_Filter
 InputFilter0.dump=false
 
 ;#dump_filename: Log path and filename.
-InputFilter0.dump_filename=../data/input_filter.dat
+InputFilter0.dump_filename=../data/input_filter_ch0.dat
 
 ;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
 ;#These options are based on parameters of gnuradio's function: gr_remez.
@@ -134,12 +134,11 @@ InputFilter0.grid_density=16
 ; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
 InputFilter0.sampling_frequency=20000000
 ;# IF deviation due to front-end LO inaccuracies [HZ]
-;# WARNING: Fraunhofer front-end hardwareconfigurations can difer. Signals available on http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html are centered on 0 Hz, ALL BANDS.
+;#InputFilter0.IF=-205000
-InputFilter0.IF=-205000
+InputFilter0.IF=0
-;#InputFilter0.IF=0
 
 ;# Decimation factor after the frequency tranaslating block
-InputFilter0.decimation_factor=8
+InputFilter0.decimation_factor=4
 
 ;######### RESAMPLER CONFIG 0 ############
 ;## Resamples the input data.
@@ -231,7 +230,7 @@ InputFilter1.sampling_frequency=20000000
 InputFilter1.IF=0
 
 ;# Decimation factor after the frequency tranaslating block
-InputFilter1.decimation_factor=8
+InputFilter1.decimation_factor=4
 
 
 ;######### RESAMPLER CONFIG 1 ############
@@ -265,20 +264,21 @@ InputFilter2.output_item_type=gr_complex
 ;## Resamples the input data.
 Resampler2.implementation=Pass_Through
 
+
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available GPS satellite channels.
 Channels_1C.count=1
-Channels_2S.count=5
+Channels_2S.count=7
-;#count: Number of available Galileo satellite channels.
+
 ;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
 Channels.in_acquisition=1
 
-;#signal:
+;# signal:
 ;# "1C" GPS L1 C/A
 ;# "2S" GPS L2 L2C (M)
 ;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL)
 ;# "5X" GALILEO E5a I+Q
-
+;# CHANNEL NUMBERING ORDER: GPS L1 C/A, GPS L2 L2C (M), GALILEO E1 B, GALILEO E5a
 
 ;# CHANNEL CONNECTION
 Channel0.RF_channel_ID=0
@@ -289,168 +289,99 @@ Channel4.RF_channel_ID=1
 Channel5.RF_channel_ID=1
 Channel6.RF_channel_ID=1
 Channel7.RF_channel_ID=1
-Channel8.RF_channel_ID=1
-Channel9.RF_channel_ID=1
-Channel10.RF_channel_ID=1
-Channel11.RF_channel_ID=1
-Channel12.RF_channel_ID=1
-Channel13.RF_channel_ID=1
-Channel14.RF_channel_ID=1
-Channel15.RF_channel_ID=1
 
 
-;######### SPECIFIC CHANNELS CONFIG ######
+;######### ACQUISITION GENERIC CONFIG ######
 ;#The following options are specific to each channel and overwrite the generic options
 
-;######### ACQUISITION GLOBAL CONFIG ############
-
-;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
 Acquisition_1C.dump=false
-;#filename: Log path and filename
 Acquisition_1C.dump_filename=./acq_dump.dat
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
 Acquisition_1C.item_type=gr_complex
-;#if: Signal intermediate frequency in [Hz]
 Acquisition_1C.if=0
-;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
 Acquisition_1C.coherent_integration_time_ms=1
-;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
 Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
-;#threshold: Acquisition threshold. It will be ignored if pfa is defined.
+Acquisition_1C.threshold=0.005
-Acquisition_1C.threshold=0.012
+Acquisition_1C.doppler_max=5000
-;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-;Acquisition_1C.pfa=0.0001
-;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_1C.doppler_max=10000
-;#doppler_max: Doppler step in the grid search [Hz]
 Acquisition_1C.doppler_step=250
-;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take
-;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition]
-;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition])
 Acquisition_1C.bit_transition_flag=false
-;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true
 Acquisition_1C.max_dwells=1
 
-
-;######### ACQUISITION CHANNELS CONFIG ######
-;#The following options are specific to each channel and overwrite the generic options
-
-;# GPS L2C M
-
 Acquisition_2S.dump=false
 Acquisition_2S.dump_filename=./acq_dump.dat
 Acquisition_2S.item_type=gr_complex
 Acquisition_2S.if=0
+Acquisition_2S.coherent_integration_time_ms=1
 Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition
-Acquisition_2S.threshold=0.0001
+Acquisition_2S.threshold=0.0005
 Acquisition_2S.doppler_max=5000
-Acquisition_2S.doppler_min=-5000
+Acquisition_2S.doppler_step=100
-Acquisition_2S.doppler_step=30
+Acquisition_2S.bit_transition_flag=false
 Acquisition_2S.max_dwells=1
 
-Acquisition_2S0.dump=false
+;# channel specific config
-Acquisition_2S0.dump_filename=./acq_dump.dat
-Acquisition_2S0.item_type=gr_complex
-Acquisition_2S0.if=0
-Acquisition_2S0.implementation=GPS_L2_M_PCPS_Acquisition
-Acquisition_2S0.threshold=0.0001
-Acquisition_2S0.doppler_max=5000
-Acquisition_2S0.doppler_min=-5000
-Acquisition_2S0.doppler_step=30
-Acquisition_2S0.max_dwells=1
 
 Acquisition_2S1.dump=false
 Acquisition_2S1.dump_filename=./acq_dump.dat
 Acquisition_2S1.item_type=gr_complex
 Acquisition_2S1.if=0
+Acquisition_2S1.coherent_integration_time_ms=1
 Acquisition_2S1.implementation=GPS_L2_M_PCPS_Acquisition
-Acquisition_2S1.threshold=0.0001
+Acquisition_2S1.threshold=0.0005
 Acquisition_2S1.doppler_max=5000
-Acquisition_2S1.doppler_min=-5000
+Acquisition_2S1.doppler_step=100
-Acquisition_2S1.doppler_step=30
+Acquisition_2S1.bit_transition_flag=false
 Acquisition_2S1.max_dwells=1
 
 
-;######### TRACKING GLOBAL CONFIG ############
+;######### TRACKING CONFIG ############
 
-;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_PLL_C_Aid_Tracking]
+;######### GPS L1 C/A GENERIC TRACKING CONFIG ############
 Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
-;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
 Tracking_1C.item_type=gr_complex
-
-;#sampling_frequency: Signal Intermediate Frequency in [Hz]
 Tracking_1C.if=0
-
+Tracking_1C.dump=true
-;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
+Tracking_1C.dump_filename=../data/epl_tracking_ch_
-Tracking_1C.dump=false
-
-;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_1C.dump_filename=./tracking_ch_
-
-;#pll_bw_hz: PLL loop filter bandwidth [Hz]
 Tracking_1C.pll_bw_hz=40.0;
-
-;#dll_bw_hz: DLL loop filter bandwidth [Hz]
 Tracking_1C.dll_bw_hz=3.0;
-
-;#order: PLL/DLL loop filter order [2] or [3]
 Tracking_1C.order=3;
-
-;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
 Tracking_1C.early_late_space_chips=0.5;
 
 
-;######### TRACKING GENERAL CHANNEL CONFIG ############
+;######### GPS L2C GENERIC TRACKING CONFIG ############
 Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking
 Tracking_2S.item_type=gr_complex
 Tracking_2S.if=0
 Tracking_2S.dump=true
-Tracking_2S.dump_filename=./tracking_ch_
+Tracking_2S.dump_filename=../data/epl_tracking_ch_
 Tracking_2S.pll_bw_hz=2.0;
 Tracking_2S.dll_bw_hz=0.5;
-Tracking_2S.order=3;
+Tracking_2S.order=2;
 Tracking_2S.early_late_space_chips=0.5;
 
-;######### TRACKING CHANNEL SPECIFIC CONFIG ############
+;######### GPS L2C SPECIFIC CHANNEL TRACKING CONFIG ############
-Tracking_2S0.implementation=GPS_L2_M_DLL_PLL_Tracking
-Tracking_2S0.item_type=gr_complex
-Tracking_2S0.if=0
-Tracking_2S0.dump=true
-Tracking_2S0.dump_filename=./tracking_ch_
-Tracking_2S0.pll_bw_hz=2.0;
-Tracking_2S0.dll_bw_hz=0.5;
-Tracking_2S0.order=3;
-Tracking_2S0.early_late_space_chips=0.5;
-
 Tracking_2S1.implementation=GPS_L2_M_DLL_PLL_Tracking
 Tracking_2S1.item_type=gr_complex
 Tracking_2S1.if=0
 Tracking_2S1.dump=true
-Tracking_2S1.dump_filename=./tracking_ch_
+Tracking_2S1.dump_filename=../data/epl_tracking_ch_
 Tracking_2S1.pll_bw_hz=2.0;
 Tracking_2S1.dll_bw_hz=0.5;
-Tracking_2S1.order=3;
+Tracking_2S1.order=2;
 Tracking_2S1.early_late_space_chips=0.5;
 
 
-;######### TELEMETRY DECODER GPS L1 CONFIG ############
+;######### TELEMETRY DECODER CONFIG ############
-;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
 TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
 TelemetryDecoder_1C.dump=false
-;#decimation factor
 TelemetryDecoder_1C.decimation_factor=20;
 
-
-;######### TELEMETRY DECODER GPS L2 CONFIG ############
-;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L2 M
 TelemetryDecoder_2S.implementation=GPS_L2_M_Telemetry_Decoder
 TelemetryDecoder_2S.dump=false
-;#decimation factor
 TelemetryDecoder_2S.decimation_factor=1;
 
 
 ;######### OBSERVABLES CONFIG ############
-;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.Mixed_Observables
+;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
 Observables.implementation=GPS_L1_CA_Observables
 
 ;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]

src/core/receiver/gnss_block_factory.cc

@@ -300,7 +300,7 @@ std::unique_ptr<GNSSBlockInterface> GNSSBlockFactory::GetChannel_1C(
             acq_.release(),
             trk_.release(),
             tlm_.release(),
-            "Channel", "1C" + appendix1, queue));
+            "Channel", "1C", queue));
 
     return channel_;
 }
@@ -355,7 +355,7 @@ std::unique_ptr<GNSSBlockInterface> GNSSBlockFactory::GetChannel_2S(
             acq_.release(),
             trk_.release(),
             tlm_.release(),
-            "Channel", "2S" + appendix1, queue));
+            "Channel", "2S", queue));
 
     return channel_;
 }
@@ -411,7 +411,7 @@ std::unique_ptr<GNSSBlockInterface> GNSSBlockFactory::GetChannel_1B(
             acq_.release(),
             trk_.release(),
             tlm_.release(),
-            "Channel", "1B" + appendix1, queue));
+            "Channel", "1B", queue));
 
     return channel_;
 }
@@ -467,7 +467,7 @@ std::unique_ptr<GNSSBlockInterface> GNSSBlockFactory::GetChannel_5X(
             acq_.release(),
             trk_.release(),
             tlm_.release(),
-            "Channel", "5X" + appendix1, queue));
+            "Channel", "5X", queue));
 
     return channel_;
 }
@@ -505,14 +505,14 @@ std::unique_ptr<std::vector<std::unique_ptr<GNSSBlockInterface>>> GNSSBlockFacto
         {
             //(i.e. Acquisition_1C0.implementation=xxxx)
             std::string acquisition_implementation_specific = configuration->property(
-                            "Acquisition_1C" + boost::lexical_cast<std::string>(i) + ".implementation",
+                            "Acquisition_1C" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                             acquisition_implementation);
             //(i.e. Tracking_1C0.implementation=xxxx)
             std::string tracking_implementation_specific  = configuration->property(
-                            "Tracking_1C" + boost::lexical_cast<std::string>(i) + ".implementation",
+                            "Tracking_1C" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                             tracking_implementation);
             std::string  telemetry_decoder_implementation_specific = configuration->property(
-                            "TelemetryDecoder_1C" + boost::lexical_cast<std::string>(i) + ".implementation",
+                            "TelemetryDecoder_1C" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                             telemetry_decoder_implementation);
 
             // Push back the channel to the vector of channels
@@ -534,14 +534,14 @@ std::unique_ptr<std::vector<std::unique_ptr<GNSSBlockInterface>>> GNSSBlockFacto
         {
             //(i.e. Acquisition_1C0.implementation=xxxx)
             std::string acquisition_implementation_specific = configuration->property(
-                            "Acquisition_2S" + boost::lexical_cast<std::string>(i) + ".implementation",
+                            "Acquisition_2S" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                             acquisition_implementation);
             //(i.e. Tracking_1C0.implementation=xxxx)
             std::string tracking_implementation_specific  = configuration->property(
-                            "Tracking_2S" + boost::lexical_cast<std::string>(i) + ".implementation",
+                            "Tracking_2S" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                             tracking_implementation);
             std::string  telemetry_decoder_implementation_specific = configuration->property(
-                            "TelemetryDecoder_2S" + boost::lexical_cast<std::string>(i) + ".implementation",
+                            "TelemetryDecoder_2S" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                             telemetry_decoder_implementation);
 
             // Push back the channel to the vector of channels
@@ -564,14 +564,14 @@ std::unique_ptr<std::vector<std::unique_ptr<GNSSBlockInterface>>> GNSSBlockFacto
            {
                //(i.e. Acquisition_1C0.implementation=xxxx)
                std::string acquisition_implementation_specific = configuration->property(
-                               "Acquisition_1B" + boost::lexical_cast<std::string>(i) + ".implementation",
+                               "Acquisition_1B" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                                acquisition_implementation);
                //(i.e. Tracking_1C0.implementation=xxxx)
                std::string tracking_implementation_specific  = configuration->property(
-                               "Tracking_1B" + boost::lexical_cast<std::string>(i) + ".implementation",
+                               "Tracking_1B" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                                tracking_implementation);
                std::string  telemetry_decoder_implementation_specific = configuration->property(
-                               "TelemetryDecoder_1B" + boost::lexical_cast<std::string>(i) + ".implementation",
+                               "TelemetryDecoder_1B" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                                telemetry_decoder_implementation);
 
                // Push back the channel to the vector of channels
@@ -594,14 +594,14 @@ std::unique_ptr<std::vector<std::unique_ptr<GNSSBlockInterface>>> GNSSBlockFacto
            {
                //(i.e. Acquisition_1C0.implementation=xxxx)
                std::string acquisition_implementation_specific = configuration->property(
-                               "Acquisition_5X" + boost::lexical_cast<std::string>(i) + ".implementation",
+                               "Acquisition_5X" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                                acquisition_implementation);
                //(i.e. Tracking_1C0.implementation=xxxx)
                std::string tracking_implementation_specific  = configuration->property(
-                               "Tracking_5X" + boost::lexical_cast<std::string>(i) + ".implementation",
+                               "Tracking_5X" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                                tracking_implementation);
                std::string  telemetry_decoder_implementation_specific = configuration->property(
-                               "TelemetryDecoder_5X" + boost::lexical_cast<std::string>(i) + ".implementation",
+                               "TelemetryDecoder_5X" + boost::lexical_cast<std::string>(channel_absolute_id) + ".implementation",
                                telemetry_decoder_implementation);
 
                // Push back the channel to the vector of channels

src/core/receiver/gnss_flowgraph.cc

@@ -293,7 +293,6 @@ void GNSSFlowgraph::connect()
             }
 
             std::string gnss_signal = channels_.at(i)->get_signal().get_signal_str(); // use channel's implicit signal!
-            std::cout<<"gnss_signal "<<gnss_signal<<std::endl;
             while (gnss_signal.compare(available_GNSS_signals_.front().get_signal_str()) != 0 )
                 {
                     available_GNSS_signals_.push_back(available_GNSS_signals_.front());
@@ -718,13 +717,12 @@ void GNSSFlowgraph::set_signals_list()
         }
 
         //    **** FOR DEBUGGING THE LIST OF GNSS SIGNALS ****
-
+//        std::list<Gnss_Signal>::iterator available_gnss_list_iter;
-        std::list<Gnss_Signal>::iterator available_gnss_list_iter;
+//            for (available_gnss_list_iter = available_GNSS_signals_.begin(); available_gnss_list_iter
-            for (available_gnss_list_iter = available_GNSS_signals_.begin(); available_gnss_list_iter
+//            != available_GNSS_signals_.end(); available_gnss_list_iter++)
-            != available_GNSS_signals_.end(); available_gnss_list_iter++)
+//            {
-            {
+//              std::cout << *available_gnss_list_iter << std::endl;
-              std::cout << *available_gnss_list_iter << std::endl;
+//            }
-            }
 }