updating configuration notation

conf/gnss-sdr_GPS_L1_SPIR.conf

@@ -167,76 +167,65 @@ Resampler.sample_freq_out=4000000
 
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available GPS satellite channels.
-Channels_GPS.count=10
+Channels_1C.count=10
 ;#count: Number of available Galileo satellite channels.
-Channels_Galileo.count=0
+Channels_1B.count=0
 ;#in_acquisition: Number of channels simultaneously acquiring
 Channels.in_acquisition=1
-;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
-;#if the option is disabled by default is assigned GPS
-Channel.system=GPS
 
 ;#signal: 
 ;# "1C" GPS L1 C/A
-;#if the option is disabled by default is assigned "1C" GPS L1 C/A
+;# "1B" Galileo E1B
 Channel.signal=1C
 
 
-
 ;Galileo FM3 -> PRN 19
 ;Galileo FM4 -> PRN 20
 ;######### CHANNEL 0 CONFIG ############
 
-;Channel0.system=Galileo
 ;Channel0.signal=1B
 ;#satellite: Satellite PRN ID for this channel. Disable this option to random search
 ;Channel0.satellite=20
 
 ;######### CHANNEL 1 CONFIG ############
-
-;Channel1.system=Galileo
 ;Channel1.signal=1B
 ;Channel1.satellite=12
 
 ;######### CHANNEL 2 CONFIG ############
-
-;Channel2.system=Galileo
 ;Channel2.signal=1B
 ;#satellite: Satellite PRN ID for this channel. Disable this option to random search
 ;Channel2.satellite=11
 
 ;######### CHANNEL 3 CONFIG ############
-
-;Channel3.system=Galileo
 ;Channel3.signal=1B
 ;Channel3.satellite=19
 
 ;######### ACQUISITION GLOBAL CONFIG ############
-
+_1C
 ;#dump: Enable or disable the acquisition internal data file logging [true] or [false] 
-Acquisition_GPS.dump=false
+Acquisition_1C.dump=false
 ;#filename: Log path and filename
-Acquisition_GPS.dump_filename=./acq_dump.dat
+Acquisition_1C.dump_filename=./acq_dump.dat
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_GPS.item_type=gr_complex
+Acquisition_1C.item_type=gr_complex
 ;#if: Signal intermediate frequency in [Hz] 
-Acquisition_GPS.if=0
+Acquisition_1C.if=0
 ;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_GPS.sampled_ms=1
+Acquisition_1C.sampled_ms=1
 ;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
 ;#threshold: Acquisition threshold
-Acquisition_GPS.threshold=0.005
+Acquisition_1C.threshold=0.005
 ;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] 
-;Acquisition_GPS.pfa=0.0001
+;Acquisition_1C.pfa=0.0001
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_max=10000
+Acquisition_1C.doppler_max=10000
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_min=-10000
+Acquisition_1C.doppler_min=-10000
 ;#doppler_step Doppler step in the grid search [Hz]
-Acquisition_GPS.doppler_step=500
+Acquisition_1C.doppler_step=500
 ;#maximum dwells
-Acquisition_GPS.max_dwells=5
+Acquisition_1C.max_dwells=5
 
 ;######### ACQUISITION CHANNELS CONFIG ######
 
@@ -259,37 +248,37 @@ Acquisition1.cboc=false
 ;######### TRACKING GLOBAL CONFIG ############
 
 ;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking] or [GPS_L1_CA_TCP_CONNECTOR_Tracking] or [Galileo_E1_DLL_PLL_VEML_Tracking]
-Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
 ;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
-Tracking_GPS.item_type=gr_complex
+Tracking_1C.item_type=gr_complex
 
 ;#sampling_frequency: Signal Intermediate Frequency in [Hz] 
-Tracking_GPS.if=0
+Tracking_1C.if=0
 
 ;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] 
-Tracking_GPS.dump=false
+Tracking_1C.dump=false
 
 ;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_GPS.dump_filename=../data/epl_tracking_ch_
+Tracking_1C.dump_filename=../data/epl_tracking_ch_
 
 ;#pll_bw_hz: PLL loop filter bandwidth [Hz]
-Tracking_GPS.pll_bw_hz=20.0;
+Tracking_1C.pll_bw_hz=20.0;
 
 ;#dll_bw_hz: DLL loop filter bandwidth [Hz]
-Tracking_GPS.dll_bw_hz=2.0;
+Tracking_1C.dll_bw_hz=2.0;
 
 ;#fll_bw_hz: FLL loop filter bandwidth [Hz]
-Tracking_GPS.fll_bw_hz=10.0;
+Tracking_1C.fll_bw_hz=10.0;
 
 ;#order: PLL/DLL loop filter order [2] or [3]
-Tracking_GPS.order=3;
+Tracking_1C.order=3;
 
 ;######### TELEMETRY DECODER GPS CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
-TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_GPS.dump=false
+TelemetryDecoder_1C.dump=false
 ;#decimation factor
-TelemetryDecoder_GPS.decimation_factor=1;
+TelemetryDecoder_1C.decimation_factor=1;
 
 ;######### OBSERVABLES CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.

conf/gnss-sdr_GPS_L1_acq_QuickSync.conf

@@ -177,173 +177,98 @@ Resampler.sample_freq_out=4000000
 
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available satellite channels.
-Channels_GPS.count=5
+Channels_1C.count=5
-Channels_Galileo.count=0
 ;#in_acquisition: Number of channels simultaneously acquiring
 Channels.in_acquisition=1
 
-;######### CHANNEL 0 CONFIG ############
-;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
-;#if the option is disabled by default is assigned GPS
-Channel0.system=GPS
-
-;#signal: 
-;# "1C" GPS L1 C/A
-;# "1P" GPS L1 P
-;# "1W" GPS L1 Z-tracking and similar (AS on)
-;# "1Y" GPS L1 Y
-;# "1M" GPS L1 M
-;# "1N" GPS L1 codeless
-;# "2C" GPS L2 C/A
-;# "2D" GPS L2 L1(C/A)+(P2-P1) semi-codeless
-;# "2S" GPS L2 L2C (M)
-;# "2L" GPS L2 L2C (L)
-;# "2X" GPS L2 L2C (M+L)
-;# "2P" GPS L2 P
-;# "2W" GPS L2 Z-tracking and similar (AS on)
-;# "2Y" GPS L2 Y
-;# "2M" GPS GPS L2 M
-;# "2N" GPS L2 codeless
-;# "5I" GPS L5 I
-;# "5Q" GPS L5 Q
-;# "5X" GPS L5 I+Q
-;# "1C" GLONASS G1 C/A
-;# "1P" GLONASS G1 P
-;# "2C" GLONASS G2 C/A  (Glonass M)
-;# "2P" GLONASS G2 P
-;# "1A" GALILEO E1 A (PRS)
-;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL)
-;# "1C" GALILEO E1 C (no data)
-;# "1X" GALILEO E1 B+C
-;# "1Z" GALILEO E1 A+B+C
-;# "5I" GALILEO E5a I (F/NAV OS)
-;# "5Q" GALILEO E5a Q  (no data)
-;# "5X" GALILEO E5a I+Q
-;# "7I" GALILEO E5b I
-;# "7Q" GALILEO E5b Q
-;# "7X" GALILEO E5b I+Q
-;# "8I" GALILEO E5 I
-;# "8Q" GALILEO E5 Q
-;# "8X" GALILEO E5 I+Q
-;# "6A" GALILEO E6 A
-;# "6B" GALILEO E6 B
-;# "6C" GALILEO E6 C
-;# "6X" GALILEO E6 B+C
-;# "6Z" GALILEO E6 A+B+C
-;# "1C" SBAS L1 C/A
-;# "5I" SBAS L5 I
-;# "5Q" SBAS L5 Q
-;# "5X" SBAS L5 I+Q
-;# "2I" COMPASS E2 I
-;# "2Q" COMPASS E2 Q
-;# "2X" COMPASS E2 IQ
-;# "7I" COMPASS E5b I
-;# "7Q" COMPASS E5b Q
-;# "7X" COMPASS E5b IQ
-;# "6I" COMPASS E6 I
-;# "6Q" COMPASS E6 Q
-;# "6X" COMPASS E6 IQ
-;#if the option is disabled by default is assigned "1C" GPS L1 C/A
-
-
-;#satellite: Satellite PRN ID for this channel. Disable this option to random search
 
 ;######### CHANNEL 0 CONFIG ############
-Channel0.system=GPS
 Channel0.signal=1C
 Channel0.satellite=1
 Channel0.repeat_satellite=false
 
 ;######### CHANNEL 1 CONFIG ############
-
-Channel1.system=GPS
 Channel1.signal=1C
 Channel1.satellite=11
 Channel1.repeat_satellite=false
 
 ;######### CHANNEL 2 CONFIG ############
-
-Channel2.system=GPS
 Channel2.signal=1C
 Channel2.satellite=17
 Channel2.repeat_satellite=false
 
 ;######### CHANNEL 3 CONFIG ############
-
-Channel3.system=GPS
 Channel3.signal=1C
 Channel3.satellite=20
 Channel3.repeat_satellite=false
 
 ;######### CHANNEL 4 CONFIG ############
-
-Channel4.system=GPS
 Channel4.signal=1C
 Channel4.satellite=32
 Channel4.repeat_satellite=false
 
-;######### ACQUISITION GLOBAL CONFIG ############
+;######### ACQUISITION GLOBAL CONFIG ############_1C
 
 ;#dump: Enable or disable the acquisition internal data file logging [true] or [false] 
-Acquisition_GPS.dump=true
+Acquisition_1C.dump=true
 ;#filename: Log path and filename
-;Acquisition_GPS.dump_filename=./acq_dump.dat
+;Acquisition_1C.dump_filename=./acq_dump.dat
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_GPS.item_type=gr_complex
+Acquisition_1C.item_type=gr_complex
 ;#if: Signal intermediate frequency in [Hz] 
-Acquisition_GPS.if=0
+Acquisition_1C.if=0
 ;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_GPS.coherent-integration_time_ms=4
+Acquisition_1C.coherent-integration_time_ms=4
 
-Acquisition_GPS.implementation=GPS_L1_CA_PCPS_QuickSync_Acquisition
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_QuickSync_Acquisition
 
 ;######### ACQUISITION CHANNELS CONFIG ######
 ;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition]
-Acquisition.implementation=GPS_L1_CA_PCPS_QuickSync_Acquisition
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_QuickSync_Acquisition
 ;#threshold: Acquisition threshold
-Acquisition_GPS.threshold=0.4
+Acquisition_1C.threshold=0.4
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_max=10000
+Acquisition_1C.doppler_max=10000
 ;#doppler_max: Doppler step in the grid search [Hz]
-Acquisition_GPS.doppler_step=250
+Acquisition_1C.doppler_step=250
 ;#repeat_satellite: Use only jointly with the satellte PRN ID option. 
 
 
 ;######### TRACKING GLOBAL CONFIG ############
 
 ;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
-Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
 ;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
-Tracking_GPS.item_type=gr_complex
+Tracking_1C.item_type=gr_complex
 
 ;#sampling_frequency: Signal Intermediate Frequency in [Hz] 
-Tracking_GPS.if=0
+Tracking_1C.if=0
 
 ;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] 
-Tracking_GPS.dump=false
+Tracking_1C.dump=false
 
 ;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_GPS.dump_filename=./tracking_ch_
+Tracking_1C.dump_filename=./tracking_ch_
 
 ;#pll_bw_hz: PLL loop filter bandwidth [Hz]
-Tracking_GPS.pll_bw_hz=50.0;
+Tracking_1C.pll_bw_hz=50.0;
 
 ;#dll_bw_hz: DLL loop filter bandwidth [Hz]
-Tracking_GPS.dll_bw_hz=4.0;
+Tracking_1C.dll_bw_hz=4.0;
 
 ;#fll_bw_hz: FLL loop filter bandwidth [Hz]
-Tracking_GPS.fll_bw_hz=10.0;
+Tracking_1C.fll_bw_hz=10.0;
 
 ;#order: PLL/DLL loop filter order [2] or [3]
-Tracking_GPS.order=3;
+Tracking_1C.order=3;
 
 ;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
-Tracking_GPS.early_late_space_chips=0.5;
+Tracking_1C.early_late_space_chips=0.5;
 
 ;######### TELEMETRY DECODER CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A.
-TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_GPS.dump=false
+TelemetryDecoder_1C.dump=false
 
 ;######### OBSERVABLES CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.

conf/gnss-sdr_GPS_L1_gr_complex_optim_trk.conf

@@ -162,126 +162,77 @@ Resampler.sample_freq_in=8000000
 ;#sample_freq_out: the desired sample frequency of the output signal
 Resampler.sample_freq_out=4000000
 
-
+_1C
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available GPS satellite channels.
-Channels_GPS.count=8
+Channels_1C.count=8
-;#count: Number of available Galileo satellite channels.
-Channels_Galileo.count=0
 ;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
 Channels.in_acquisition=1
-;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
-;#if the option is disabled by default is assigned GPS
-Channel.system=GPS
-
 ;#signal: 
 ;#if the option is disabled by default is assigned "1C" GPS L1 C/A
 Channel.signal=1C
-Channel0.signal=1C
-
-;#satellite: Satellite PRN ID for this channel. Disable this option to random search
-Channel0.satellite=15
-Channel0.repeat_satellite=false
-
-;######### CHANNEL 1 CONFIG ############
-
-Channel1.system=GPS
-Channel1.signal=1C
-Channel1.satellite=18
-Channel1.repeat_satellite=false
-
-;######### CHANNEL 2 CONFIG ############
-
-Channel2.system=GPS
-Channel2.signal=1C
-Channel2.satellite=16
-Channel2.repeat_satellite=false
-
-;######### CHANNEL 3 CONFIG ############
-
-Channel3.system=GPS
-Channel3.signal=1C
-Channel3.satellite=21
-Channel3.repeat_satellite=false
-
-;######### CHANNEL 4 CONFIG ############
-
-Channel4.system=GPS
-Channel4.signal=1C
-Channel4.satellite=3
-Channel4.repeat_satellite=false
-
-;######### CHANNEL 5 CONFIG ############
-
-Channel5.system=GPS
-Channel5.signal=1C
-;Channel5.satellite=21
-;Channel5.repeat_satellite=false
 
 
 ;######### ACQUISITION GLOBAL CONFIG ############
-
-
 ;#dump: Enable or disable the acquisition internal data file logging [true] or [false] 
-Acquisition_GPS.dump=false
+Acquisition_1C.dump=false
 ;#filename: Log path and filename
-Acquisition_GPS.dump_filename=./acq_dump.dat
+Acquisition_1C.dump_filename=./acq_dump.dat
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_GPS.item_type=gr_complex
+Acquisition_1C.item_type=gr_complex
 ;#if: Signal intermediate frequency in [Hz] 
-Acquisition_GPS.if=0
+Acquisition_1C.if=0
 ;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_GPS.sampled_ms=1
+Acquisition_1C.sampled_ms=1
 ;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
 ;#threshold: Acquisition threshold
-Acquisition_GPS.threshold=0.008
+Acquisition_1C.threshold=0.008
 ;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] 
-;Acquisition_GPS.pfa=0.01
+;Acquisition_1C.pfa=0.01
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_max=10000
+Acquisition_1C.doppler_max=10000
 ;#doppler_max: Doppler step in the grid search [Hz]
-Acquisition_GPS.doppler_step=500
+Acquisition_1C.doppler_step=500
 
 
 
 ;######### TRACKING GLOBAL CONFIG ############
-
 ;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking]
-Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Optim_Tracking
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Optim_Tracking
 ;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
-Tracking_GPS.item_type=gr_complex
+Tracking_1C.item_type=gr_complex
 
 ;#sampling_frequency: Signal Intermediate Frequency in [Hz] 
-Tracking_GPS.if=0
+Tracking_1C.if=0
 
 ;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] 
-Tracking_GPS.dump=false
+Tracking_1C.dump=false
 
 ;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_GPS.dump_filename=./tracking_ch_
+Tracking_1C.dump_filename=./tracking_ch_
 
 ;#pll_bw_hz: PLL loop filter bandwidth [Hz]
-Tracking_GPS.pll_bw_hz=50.0;
+Tracking_1C.pll_bw_hz=50.0;
 
 ;#dll_bw_hz: DLL loop filter bandwidth [Hz]
-Tracking_GPS.dll_bw_hz=2.0;
+Tracking_1C.dll_bw_hz=2.0;
 
 ;#fll_bw_hz: FLL loop filter bandwidth [Hz]
-Tracking_GPS.fll_bw_hz=10.0;
+Tracking_1C.fll_bw_hz=10.0;
 
 ;#order: PLL/DLL loop filter order [2] or [3]
-Tracking_GPS.order=3;
+Tracking_1C.order=3;
 
 ;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
-Tracking_GPS.early_late_space_chips=0.5;
+Tracking_1C.early_late_space_chips=0.5;
 
 ;######### TELEMETRY DECODER GPS CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
-TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_GPS.dump=false
+TelemetryDecoder_1C.dump=false
 ;#decimation factor
-TelemetryDecoder_GPS.decimation_factor=1;
+TelemetryDecoder_1C.decimation_factor=1;
 
 ;######### OBSERVABLES CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.

conf/gnss-sdr_GPS_L1_nsr.conf

@@ -27,281 +27,111 @@ GNSS-SDR.SUPL_LAC=0x59e2
 GNSS-SDR.SUPL_CI=0x31b0
 
 ;######### SIGNAL_SOURCE CONFIG ############
-;#implementation: Use [File_Signal_Source] [Nsr_File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
 SignalSource.implementation=Nsr_File_Signal_Source
-
+SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream
-;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=../data/E1L1_FE0_Band0.stream
-
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
 SignalSource.item_type=byte
-
-;#sampling_frequency: Original Signal sampling frequency in [Hz] 
 SignalSource.sampling_frequency=20480000
-
-;#freq: RF front-end center frequency in [Hz] 
 SignalSource.freq=1575420000
-
-;#subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0)
-SignalSource.subdevice=B:0
-
-;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
 SignalSource.samples=0
-
-;#repeat: Repeat the processing file. Disable this option in this version
 SignalSource.repeat=false
-
-;#dump: Dump the Signal source data to a file. Disable this option in this version
 SignalSource.dump=false
-
 SignalSource.dump_filename=../data/signal_source.dat
-
-
-;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
-; it helps to not overload the CPU, but the processing time will be longer. 
 SignalSource.enable_throttle_control=false
 
 
 ;######### SIGNAL_CONDITIONER CONFIG ############
-;## It holds blocks to change data type, filter and resample input data. 
-
-;#implementation: Use [Pass_Through] or [Signal_Conditioner]
-;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks
-;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks
 SignalConditioner.implementation=Signal_Conditioner
 
 ;######### DATA_TYPE_ADAPTER CONFIG ############
-;## Changes the type of input data.
-;#implementation: [Pass_Through] disables this block
 DataTypeAdapter.implementation=Pass_Through
 DataTypeAdapter.item_type=float
 
 ;######### INPUT_FILTER CONFIG ############
-;## Filter the input data. Can be combined with frequency translation for IF signals
-
-;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
-;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation 
-;# that shifts IF down to zero Hz.
-
 InputFilter.implementation=Freq_Xlating_Fir_Filter
-
-;#dump: Dump the filtered data to a file.
 InputFilter.dump=false
-
-;#dump_filename: Log path and filename.
 InputFilter.dump_filename=../data/input_filter.dat
-
-;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. 
-;#These options are based on parameters of gnuradio's function: gr_remez.
-;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse 
-;#reponse given a set of band edges, the desired reponse on those bands, 
-;#and the weight given to the error in those bands.
-
-;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
 InputFilter.input_item_type=float
-
-;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
 InputFilter.output_item_type=gr_complex
-
-;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
 InputFilter.taps_item_type=float
-
-;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
 InputFilter.number_of_taps=5
-
-;#number_of _bands: Number of frequency bands in the filter.
 InputFilter.number_of_bands=2
-
-;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
-;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
-;#The number of band_begin and band_end elements must match the number of bands
-
 InputFilter.band1_begin=0.0
 InputFilter.band1_end=0.45
 InputFilter.band2_begin=0.55
 InputFilter.band2_end=1.0
-
-;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
-;#The number of ampl_begin and ampl_end elements must match the number of bands
-
 InputFilter.ampl1_begin=1.0
 InputFilter.ampl1_end=1.0
 InputFilter.ampl2_begin=0.0
 InputFilter.ampl2_end=0.0
-
-;#band_error: weighting applied to each band (usually 1).
-;#The number of band_error elements must match the number of bands
 InputFilter.band1_error=1.0
 InputFilter.band2_error=1.0
-
-;#filter_type: one of "bandpass", "hilbert" or "differentiator" 
 InputFilter.filter_type=bandpass
-
-;#grid_density: determines how accurately the filter will be constructed.
-;The minimum value is 16; higher values are slower to compute the filter.
 InputFilter.grid_density=16
-
-;# Original sampling frequency stored in the signal file
 InputFilter.sampling_frequency=20480000
-
-;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
-;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz
-
 InputFilter.IF=5499998.47412109
-
-;# Decimation factor after the frequency tranaslating block
 InputFilter.decimation_factor=8
 
 
 ;######### RESAMPLER CONFIG ############
-;## Resamples the input data. 
-
-;#implementation: Use [Pass_Through] or [Direct_Resampler]
-;#[Pass_Through] disables this block
-;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation
-;Resampler.implementation=Direct_Resampler
 Resampler.implementation=Pass_Through
-
-;#dump: Dump the resamplered data to a file.
 Resampler.dump=false
-;#dump_filename: Log path and filename.
 Resampler.dump_filename=../data/resampler.dat
-
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
 Resampler.item_type=gr_complex
 
-;#sample_freq_in: the sample frequency of the input signal
-Resampler.sample_freq_in=8000000
-
-;#sample_freq_out: the desired sample frequency of the output signal
-Resampler.sample_freq_out=2048000
-
 
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available GPS satellite channels.
-Channels_GPS.count=8
+Channels_1C.count=8
-;#count: Number of available Galileo satellite channels.
-Channels_Galileo.count=0
-;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
 Channels.in_acquisition=1
-;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
-;#if the option is disabled by default is assigned GPS
-Channel.system=GPS
-
-;#signal: 
-;#if the option is disabled by default is assigned "1C" GPS L1 C/A
 Channel.signal=1C
 
 
 ;######### GPS ACQUISITION CONFIG ############
-
+Acquisition_1C.dump=false
-;#dump: Enable or disable the acquisition internal data file logging [true] or [false] 
+Acquisition_1C.dump_filename=./acq_dump.dat
-Acquisition_GPS.dump=false
+Acquisition_1C.item_type=gr_complex
-;#filename: Log path and filename
+Acquisition_1C.if=0
-Acquisition_GPS.dump_filename=./acq_dump.dat
+Acquisition_1C.sampled_ms=1
-;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
-Acquisition_GPS.item_type=gr_complex
+Acquisition_1C.threshold=0.0075
-;#if: Signal intermediate frequency in [Hz] 
+;Acquisition_1C.pfa=0.01
-Acquisition_GPS.if=0
+Acquisition_1C.doppler_max=10000
-;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
+Acquisition_1C.doppler_step=500
-Acquisition_GPS.sampled_ms=1
-;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition
-;#threshold: Acquisition threshold
-Acquisition_GPS.threshold=0.0075
-;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] 
-;Acquisition_GPS.pfa=0.01
-;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_max=10000
-;#doppler_max: Doppler step in the grid search [Hz]
-Acquisition_GPS.doppler_step=500
-
-;######### ACQUISITION CHANNELS CONFIG ######
-;#The following options are specific to each channel and overwrite the generic options 
 
 
 ;######### TRACKING GPS CONFIG ############
-
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
-;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking] or [GPS_L1_CA_TCP_CONNECTOR_Tracking] or [Galileo_E1_DLL_PLL_VEML_Tracking]
+Tracking_1C.item_type=gr_complex
-Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Tracking
+Tracking_1C.if=0
-;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
+Tracking_1C.dump=false
-Tracking_GPS.item_type=gr_complex
+Tracking_1C.dump_filename=../data/epl_tracking_ch_
-
+Tracking_1C.pll_bw_hz=45.0;
-;#sampling_frequency: Signal Intermediate Frequency in [Hz] 
+Tracking_1C.dll_bw_hz=2.0;
-Tracking_GPS.if=0
+Tracking_1C.order=3;
-
-;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] 
-Tracking_GPS.dump=false
-
-;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_GPS.dump_filename=../data/epl_tracking_ch_
-
-;#pll_bw_hz: PLL loop filter bandwidth [Hz]
-Tracking_GPS.pll_bw_hz=45.0;
-
-;#dll_bw_hz: DLL loop filter bandwidth [Hz]
-Tracking_GPS.dll_bw_hz=2.0;
-
-;#fll_bw_hz: FLL loop filter bandwidth [Hz]
-Tracking_GPS.fll_bw_hz=10.0;
-
-;#order: PLL/DLL loop filter order [2] or [3]
-Tracking_GPS.order=3;
 
 ;######### TELEMETRY DECODER GPS CONFIG ############
-;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.dump=false
-TelemetryDecoder_GPS.dump=false
+TelemetryDecoder_1C.decimation_factor=1;
-;#decimation factor
-TelemetryDecoder_GPS.decimation_factor=1;
 
 ;######### OBSERVABLES CONFIG ############
-;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
 Observables.implementation=GPS_L1_CA_Observables
-
-;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] 
 Observables.dump=false
-
-;#dump_filename: Log path and filename.
 Observables.dump_filename=./observables.dat
 
 
 ;######### PVT CONFIG ############
-;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
 PVT.implementation=GPS_L1_CA_PVT
-
-;#averaging_depth: Number of PVT observations in the moving average algorithm
 PVT.averaging_depth=100
-
-;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false] 
 PVT.flag_averaging=false
-
-;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
 PVT.output_rate_ms=10
-
-;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
 PVT.display_rate_ms=500
-
-;# RINEX, KML, and NMEA output configuration
-
-;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
 PVT.dump_filename=./PVT
-
-;#nmea_dump_filename: NMEA log path and filename
 PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
-
-;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
 PVT.flag_nmea_tty_port=false;
-
-;#nmea_dump_devname: serial device descriptor for NMEA logging
 PVT.nmea_dump_devname=/dev/pts/4
-
-
-;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] 
 PVT.dump=true
 
 ;######### OUTPUT_FILTER CONFIG ############
-;# Receiver output filter: Leave this block disabled in this version
 OutputFilter.implementation=Null_Sink_Output_Filter
-OutputFilter.filename=data/gnss-sdr.dat
 OutputFilter.item_type=gr_complex

conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf

@@ -22,7 +22,7 @@ GNSS-SDR.SUPL_gps_ephemeris_port=7275
 GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
 GNSS-SDR.SUPL_gps_acquisition_port=7275
 GNSS-SDR.SUPL_MCC=244
-GNSS-SDR.SUPL_MNS=5
+GNSS-SDR.SUPL_MNS=5_1C
 GNSS-SDR.SUPL_LAC=0x59e2
 GNSS-SDR.SUPL_CI=0x31b0
 
@@ -30,9 +30,6 @@ GNSS-SDR.SUPL_CI=0x31b0
 ;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] [Osmosdr_Signal_Source]
 SignalSource.implementation=RtlTcp_Signal_Source
 
-;#filename: path to file with the captured GNSS signal samples to be processed
-SignalSource.filename=/media/DATALOGGER_/signals/RTL-SDR/geo/pmt4.dat
-
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
 SignalSource.item_type=gr_complex
 
@@ -175,91 +172,78 @@ Resampler.implementation=Pass_Through
 
 ;######### CHANNELS GLOBAL CONFIG ############
 ;#count: Number of available GPS satellite channels.
-Channels_GPS.count=4
+Channels_1C.count=4
-;#count: Number of available Galileo satellite channels.
-Channels_Galileo.count=0
 ;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
 Channels.in_acquisition=1
-;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS
-;#if the option is disabled by default is assigned GPS
-Channel.system=GPS
-
-;#signal:
-;#if the option is disabled by default is assigned "1C" GPS L1 C/A
 Channel.signal=1C
-Channel0.signal=1C
+
 
 
 ;######### ACQUISITION GLOBAL CONFIG ############
 
 ;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
-Acquisition_GPS.dump=false
+Acquisition_1C.dump=false
 ;#filename: Log path and filename
-Acquisition_GPS.dump_filename=./acq_dump.dat
+Acquisition_1C.dump_filename=./acq_dump.dat
 ;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
-Acquisition_GPS.item_type=gr_complex
+Acquisition_1C.item_type=gr_complex
 ;#if: Signal intermediate frequency in [Hz]
-Acquisition_GPS.if=0
+Acquisition_1C.if=0
 ;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
-Acquisition_GPS.sampled_ms=1
+Acquisition_1C.sampled_ms=1
 ;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-Acquisition_GPS.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
+Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
 ;#threshold: Acquisition threshold
-Acquisition_GPS.threshold=0.015
+Acquisition_1C.threshold=0.015
 ;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
-;Acquisition_GPS.pfa=0.0001
+;Acquisition_1C.pfa=0.0001
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_max=10000
+Acquisition_1C.doppler_max=10000
 ;#doppler_max: Maximum expected Doppler shift [Hz]
-Acquisition_GPS.doppler_min=-10000
+Acquisition_1C.doppler_min=-10000
 ;#doppler_step Doppler step in the grid search [Hz]
-Acquisition_GPS.doppler_step=500
+Acquisition_1C.doppler_step=500
 ;#maximum dwells
-Acquisition_GPS.max_dwells=15
+Acquisition_1C.max_dwells=15
 
-;######### ACQUISITION CHANNELS CONFIG ######
-;#The following options are specific to each channel and overwrite the generic options
-
-;#repeat_satellite: Use only jointly with the satellite PRN ID option. The default value is false
-;Acquisition0.repeat_satellite = false
 
 ;######### TRACKING GLOBAL CONFIG ############
 
 ;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking] [GPS_L1_CA_DLL_PLL_Optim_Tracking]
-Tracking_GPS.implementation=GPS_L1_CA_DLL_PLL_Optim_Tracking
+Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Optim_Tracking
 ;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
-Tracking_GPS.item_type=gr_complex
+Tracking_1C.item_type=gr_complex
 
 ;#sampling_frequency: Signal Intermediate Frequency in [Hz]
-Tracking_GPS.if=0
+Tracking_1C.if=0
 
 ;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
-Tracking_GPS.dump=false
+Tracking_1C.dump=false
 
 ;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
-Tracking_GPS.dump_filename=./tracking_ch_
+Tracking_1C.dump_filename=./tracking_ch_
 
 ;#pll_bw_hz: PLL loop filter bandwidth [Hz]
-Tracking_GPS.pll_bw_hz=40.0;
+Tracking_1C.pll_bw_hz=40.0;
 
 ;#dll_bw_hz: DLL loop filter bandwidth [Hz]
-Tracking_GPS.dll_bw_hz=2.0;
+Tracking_1C.dll_bw_hz=2.0;
 
 ;#fll_bw_hz: FLL loop filter bandwidth [Hz]
-Tracking_GPS.fll_bw_hz=10.0;
+Tracking_1C.fll_bw_hz=10.0;
 
 ;#order: PLL/DLL loop filter order [2] or [3]
-Tracking_GPS.order=3;
+Tracking_1C.order=3;
 
 ;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
-Tracking_GPS.early_late_space_chips=0.5;
+Tracking_1C.early_late_space_chips=0.5;
 
 ;######### TELEMETRY DECODER GPS CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
-TelemetryDecoder_GPS.implementation=GPS_L1_CA_Telemetry_Decoder
+TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
-TelemetryDecoder_GPS.dump=false
+TelemetryDecoder_1C.dump=false
 ;#decimation factor
-TelemetryDecoder_GPS.decimation_factor=1;
+TelemetryDecoder_1C.decimation_factor=1;
 
 ;######### OBSERVABLES CONFIG ############
 ;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.