From 1ff445937bb240af85557f22a501f10e0e202803 Mon Sep 17 00:00:00 2001 From: Carles Fernandez Date: Fri, 4 May 2018 23:44:00 +0200 Subject: [PATCH] Clean configuration files Add header and pointer to the block documentation page Remove most of the comments so files are easier to read Remove old/unused parameters --- conf/front-end-cal.conf | 3 + conf/gnss-sdr.conf | 131 +-------- ...nss-sdr_GLONASS_L1_CA_GPS_L1_CA_ibyte.conf | 7 +- .../gnss-sdr_GLONASS_L1_CA_GPS_L2C_ibyte.conf | 7 +- conf/gnss-sdr_GLONASS_L1_CA_ibyte.conf | 5 +- .../gnss-sdr_GLONASS_L1_CA_ibyte_coh_trk.conf | 5 +- ...nss-sdr_GLONASS_L2_CA_GPS_L1_CA_ibyte.conf | 8 +- .../gnss-sdr_GLONASS_L2_CA_GPS_L2C_ibyte.conf | 8 +- conf/gnss-sdr_GLONASS_L2_CA_ibyte.conf | 5 +- .../gnss-sdr_GLONASS_L2_CA_ibyte_coh_trk.conf | 5 +- ...gnss-sdr_GPS_L1_2ch_fmcomms2_realtime.conf | 3 + conf/gnss-sdr_GPS_L1_CA_ibyte.conf | 3 + conf/gnss-sdr_GPS_L1_FPGA.conf | 10 +- conf/gnss-sdr_GPS_L1_GN3S_realtime.conf | 7 +- conf/gnss-sdr_GPS_L1_LimeSDR.conf | 3 + conf/gnss-sdr_GPS_L1_SPIR.conf | 127 +------- conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf | 143 +-------- conf/gnss-sdr_GPS_L1_USRP_realtime.conf | 173 +---------- conf/gnss-sdr_GPS_L1_acq_QuickSync.conf | 152 +--------- conf/gnss-sdr_GPS_L1_bladeRF.conf | 12 +- conf/gnss-sdr_GPS_L1_fmcomms2_realtime.conf | 16 +- conf/gnss-sdr_GPS_L1_gr_complex.conf | 32 +- conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf | 7 +- conf/gnss-sdr_GPS_L1_ishort.conf | 27 +- conf/gnss-sdr_GPS_L1_nsr.conf | 14 +- conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf | 4 +- conf/gnss-sdr_GPS_L1_plutosdr_realtime.conf | 3 + ...-sdr_GPS_L1_pulse_blanking_gr_complex.conf | 47 +-- conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf | 116 +------- conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf | 12 +- conf/gnss-sdr_GPS_L1_two_bits_cpx.conf | 7 +- conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf | 64 +--- conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf | 7 +- ...nss-sdr_Galileo_E1_USRP_X300_realtime.conf | 4 +- conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf | 178 +---------- conf/gnss-sdr_Galileo_E1_ishort.conf | 158 +--------- conf/gnss-sdr_Galileo_E1_nsr.conf | 12 +- conf/gnss-sdr_Galileo_E5a.conf | 172 +---------- conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf | 8 +- conf/gnss-sdr_Hybrid_byte.conf | 145 +-------- conf/gnss-sdr_Hybrid_byte_sim.conf | 149 +--------- conf/gnss-sdr_Hybrid_gr_complex.conf | 173 +---------- conf/gnss-sdr_Hybrid_ishort.conf | 154 +--------- conf/gnss-sdr_Hybrid_nsr.conf | 136 +-------- ...r_galileo_E1_extended_correlator_byte.conf | 91 +----- ...galileo_E1_extended_correlator_labsat.conf | 127 +------- ...nnel_GPS_L1_Flexiband_bin_file_III_1a.conf | 126 +------- ...nnel_GPS_L1_Flexiband_realtime_III_1a.conf | 136 +-------- ...nnel_GPS_L1_Flexiband_realtime_III_1b.conf | 126 +------- ...annel_GPS_L1_Flexiband_realtime_II_3b.conf | 121 +------- ...hannel_GPS_L1_Flexiband_realtime_I_1b.conf | 127 +------- ...l_GPS_L1_L2_Flexiband_realtime_III_1b.conf | 168 +---------- ...Galileo_E1B_Flexiband_bin_file_III_1b.conf | 193 +----------- ...ultichannel_GPS_L1_USRP_X300_realtime.conf | 222 +------------- ...el_GPS_L2_M_Flexiband_bin_file_III_1b.conf | 195 +----------- ...S_L2_M_Flexiband_bin_file_III_1b_real.conf | 146 +-------- ..._all_in_one_Flexiband_bin_file_III_1b.conf | 277 ++++-------------- conf/gnss-sdr_multisource_Hybrid_ishort.conf | 246 +--------------- conf/gnss-sdr_multisource_Hybrid_nsr.conf | 210 +------------ 59 files changed, 310 insertions(+), 4663 deletions(-) diff --git a/conf/front-end-cal.conf b/conf/front-end-cal.conf index 72c9be845..6ef6ec846 100644 --- a/conf/front-end-cal.conf +++ b/conf/front-end-cal.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Default configuration file ; You can define your own front-end calibration tool configuration and invoke it by doing ; ./front-end-cal --config_file=my_GNSS_SDR_configuration.conf diff --git a/conf/gnss-sdr.conf b/conf/gnss-sdr.conf index 0c456f075..e9a05e798 100644 --- a/conf/gnss-sdr.conf +++ b/conf/gnss-sdr.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Default configuration file ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf @@ -25,149 +28,63 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=ishort -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner -;SignalConditioner.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Ishort_To_Complex -;DataTypeAdapter.implementation=Pass_Through ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. +InputFilter.implementation=Pass_Through ; or Fir_Filter -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter -InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of GNU Radio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.44 InputFilter.band2_begin=0.55 InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter.sampling_frequency=4000000 InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neighborhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. -Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal -Resampler.sample_freq_in=4000000 -;#sample_freq_out: the desired sample frequency of the output signal -Resampler.sample_freq_out=2000000 -;#dump: Dump the resampled data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS L1 C/A satellite channels. Channels_1C.count=6 -;#count: Number of available Galileo E1B satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#if the option is disabled by default is assigned "1C" GPS L1 C/A -Channel.signal=1C - - ;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options ;######### CHANNEL 0 CONFIG ############ ;Channel0.signal=1C -;#satellite: Satellite PRN ID for this channel. Disable this option for random search ;Channel0.satellite=11 ;######### CHANNEL 1 CONFIG ############ @@ -176,90 +93,52 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.005 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Maximum expected Doppler shift [Hz] -Acquisition_1C.doppler_min=-10000 -;#doppler_step Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#maximum dwells Acquisition_1C.max_dwells=5 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=45.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=3.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad PVT.AR_GPS=PPP-AR ; options: OFF, Continuous, Instantaneous, Fix-and-Hold, PPP-AR -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=10 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms <= display_rate_ms. PVT.display_rate_ms=500 -PVT.positioning_mode=PPP_Static -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea -;#flag_nmea_tty_port: Enables or disables the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=true -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 -;#flag_rtcm_server: Enables or disables a TCP/IP server transmitting RTCM 3.2 messages (accepts multiple clients, port 2101 by default) PVT.flag_rtcm_server=true -;#flag_rtcm_tty_port: Enables or disables the RTCM log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_rtcm_tty_port=false -;#rtcm_dump_devname: serial device descriptor for RTCM logging PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump, ".kml" and ".geojson" to GIS-friendly formats. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_GLONASS_L1_CA_GPS_L1_CA_ibyte.conf b/conf/gnss-sdr_GLONASS_L1_CA_GPS_L1_CA_ibyte.conf index 53d903ba3..f042def9c 100644 --- a/conf/gnss-sdr_GLONASS_L1_CA_GPS_L1_CA_ibyte.conf +++ b/conf/gnss-sdr_GLONASS_L1_CA_GPS_L1_CA_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -79,7 +82,6 @@ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex Acquisition_1C.threshold=0.0 Acquisition_1C.pfa=0.00001 -Acquisition_1C.if=0 Acquisition_1C.doppler_max=10000 Acquisition_1C.doppler_step=250 Acquisition_1C.dump=false; @@ -90,7 +92,6 @@ Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition Acquisition_1G.item_type=gr_complex Acquisition_1G.threshold=0.0 Acquisition_1G.pfa=0.00001 -Acquisition_1G.if=0 Acquisition_1G.doppler_max=10000 Acquisition_1G.doppler_step=250 Acquisition_1G.dump=false; @@ -100,7 +101,6 @@ Acquisition_1G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.early_late_space_chips=0.5 Tracking_1C.pll_bw_hz=20.0; Tracking_1C.dll_bw_hz=2.0; @@ -109,7 +109,6 @@ Tracking_1C.dump_filename=/archive/gps_tracking_ch_ Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_Tracking Tracking_1G.item_type=gr_complex -Tracking_1G.if=0 Tracking_1G.early_late_space_chips=0.5 Tracking_1G.pll_bw_hz=25.0; Tracking_1G.dll_bw_hz=3.0; diff --git a/conf/gnss-sdr_GLONASS_L1_CA_GPS_L2C_ibyte.conf b/conf/gnss-sdr_GLONASS_L1_CA_GPS_L2C_ibyte.conf index cc9ba010f..09bddfb46 100644 --- a/conf/gnss-sdr_GLONASS_L1_CA_GPS_L2C_ibyte.conf +++ b/conf/gnss-sdr_GLONASS_L1_CA_GPS_L2C_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -82,7 +85,6 @@ Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex Acquisition_2S.threshold=0.0 Acquisition_2S.pfa=0.00001 -Acquisition_2S.if=0 Acquisition_2S.doppler_max=10000 Acquisition_2S.doppler_step=60 Acquisition_2S.max_dwells=1 @@ -91,7 +93,6 @@ Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition Acquisition_1G.item_type=gr_complex Acquisition_1G.threshold=0.0 Acquisition_1G.pfa=0.00001 -Acquisition_1G.if=0 Acquisition_1G.doppler_max=10000 Acquisition_1G.doppler_step=250 Acquisition_1G.dump=false; @@ -100,7 +101,6 @@ Acquisition_1G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.early_late_space_chips=0.5 Tracking_2S.pll_bw_hz=2.0; Tracking_2S.dll_bw_hz=0.250; @@ -110,7 +110,6 @@ Tracking_2S.dump_filename=/archive/gps_tracking_ch_ Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_Tracking Tracking_1G.item_type=gr_complex -Tracking_1G.if=0 Tracking_1G.early_late_space_chips=0.5 Tracking_1G.pll_bw_hz=25.0; Tracking_1G.dll_bw_hz=3.0; diff --git a/conf/gnss-sdr_GLONASS_L1_CA_ibyte.conf b/conf/gnss-sdr_GLONASS_L1_CA_ibyte.conf index b95b93551..077d3dd1e 100644 --- a/conf/gnss-sdr_GLONASS_L1_CA_ibyte.conf +++ b/conf/gnss-sdr_GLONASS_L1_CA_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -36,7 +39,6 @@ Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition Acquisition_1G.item_type=gr_complex Acquisition_1G.threshold=0.0 Acquisition_1G.pfa=0.0001 -Acquisition_1G.if=0 Acquisition_1G.doppler_max=10000 Acquisition_1G.doppler_step=250 Acquisition_1G.dump=true; @@ -47,7 +49,6 @@ Acquisition_1G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_Tracking Tracking_1G.item_type=gr_complex -Tracking_1G.if=0 Tracking_1G.early_late_space_chips=0.5 Tracking_1G.pll_bw_hz=25.0; Tracking_1G.dll_bw_hz=3.0; diff --git a/conf/gnss-sdr_GLONASS_L1_CA_ibyte_coh_trk.conf b/conf/gnss-sdr_GLONASS_L1_CA_ibyte_coh_trk.conf index 0bdbe7739..ca1197a6d 100644 --- a/conf/gnss-sdr_GLONASS_L1_CA_ibyte_coh_trk.conf +++ b/conf/gnss-sdr_GLONASS_L1_CA_ibyte_coh_trk.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -36,7 +39,6 @@ Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition Acquisition_1G.item_type=gr_complex Acquisition_1G.threshold=0.0 Acquisition_1G.pfa=0.0001 -Acquisition_1G.if=0 Acquisition_1G.doppler_max=10000 Acquisition_1G.doppler_step=250 Acquisition_1G.dump=false; @@ -47,7 +49,6 @@ Acquisition_1G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_C_Aid_Tracking Tracking_1G.item_type=gr_complex -Tracking_1G.if=0 Tracking_1G.early_late_space_chips=0.5 Tracking_1G.pll_bw_hz=40.0; Tracking_1G.dll_bw_hz=3.0; diff --git a/conf/gnss-sdr_GLONASS_L2_CA_GPS_L1_CA_ibyte.conf b/conf/gnss-sdr_GLONASS_L2_CA_GPS_L1_CA_ibyte.conf index 04b8dd746..7e4e9e03f 100644 --- a/conf/gnss-sdr_GLONASS_L2_CA_GPS_L1_CA_ibyte.conf +++ b/conf/gnss-sdr_GLONASS_L2_CA_GPS_L1_CA_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -79,7 +82,6 @@ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex Acquisition_1C.threshold=0.0 Acquisition_1C.pfa=0.00001 -Acquisition_1C.if=0 Acquisition_1C.doppler_max=10000 Acquisition_1C.doppler_step=250 Acquisition_1C.dump=false; @@ -90,7 +92,6 @@ Acquisition_2G.implementation=GLONASS_L2_CA_PCPS_Acquisition Acquisition_2G.item_type=gr_complex Acquisition_2G.threshold=0.0 Acquisition_2G.pfa=0.00001 -Acquisition_2G.if=0 Acquisition_2G.doppler_max=10000 Acquisition_2G.doppler_step=250 Acquisition_2G.dump=false; @@ -100,7 +101,6 @@ Acquisition_2G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.early_late_space_chips=0.5 Tracking_1C.pll_bw_hz=20.0; Tracking_1C.dll_bw_hz=2.0; @@ -109,7 +109,6 @@ Tracking_1C.dump_filename=/archive/gps_tracking_ch_ Tracking_2G.implementation=GLONASS_L2_CA_DLL_PLL_Tracking Tracking_2G.item_type=gr_complex -Tracking_2G.if=0 Tracking_2G.early_late_space_chips=0.5 Tracking_2G.pll_bw_hz=25.0; Tracking_2G.dll_bw_hz=2.0; @@ -127,6 +126,7 @@ Observables.dump_filename=/archive/gnss_observables.dat ;######### PVT CONFIG ############ PVT.implementation=RTKLIB_PVT +PVT.positioning_mode=Single PVT.output_rate_ms=100 PVT.display_rate_ms=500 PVT.trop_model=Saastamoinen diff --git a/conf/gnss-sdr_GLONASS_L2_CA_GPS_L2C_ibyte.conf b/conf/gnss-sdr_GLONASS_L2_CA_GPS_L2C_ibyte.conf index 32faba32a..c3ab7cb9c 100644 --- a/conf/gnss-sdr_GLONASS_L2_CA_GPS_L2C_ibyte.conf +++ b/conf/gnss-sdr_GLONASS_L2_CA_GPS_L2C_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -82,7 +85,6 @@ Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex Acquisition_2S.threshold=0.0 Acquisition_2S.pfa=0.00001 -Acquisition_2S.if=0 Acquisition_2S.doppler_max=10000 Acquisition_2S.doppler_step=60 Acquisition_2S.max_dwells=1 @@ -91,7 +93,6 @@ Acquisition_2G.implementation=GLONASS_L2_CA_PCPS_Acquisition Acquisition_2G.item_type=gr_complex Acquisition_2G.threshold=0.0 Acquisition_2G.pfa=0.00001 -Acquisition_2G.if=0 Acquisition_2G.doppler_max=10000 Acquisition_2G.doppler_step=250 Acquisition_2G.dump=false; @@ -100,7 +101,6 @@ Acquisition_2G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.early_late_space_chips=0.5 Tracking_2S.pll_bw_hz=2.0; Tracking_2S.dll_bw_hz=0.250; @@ -110,7 +110,6 @@ Tracking_2S.dump_filename=/archive/gps_tracking_ch_ Tracking_2G.implementation=GLONASS_L2_CA_DLL_PLL_Tracking Tracking_2G.item_type=gr_complex -Tracking_2G.if=0 Tracking_2G.early_late_space_chips=0.5 Tracking_2G.pll_bw_hz=25.0; Tracking_2G.dll_bw_hz=3.0; @@ -128,6 +127,7 @@ Observables.dump_filename=/archive/gnss_observables.dat ;######### PVT CONFIG ############ PVT.implementation=RTKLIB_PVT +PVT.positioning_mode=Single PVT.output_rate_ms=100 PVT.display_rate_ms=500 PVT.trop_model=Saastamoinen diff --git a/conf/gnss-sdr_GLONASS_L2_CA_ibyte.conf b/conf/gnss-sdr_GLONASS_L2_CA_ibyte.conf index e8d1342a8..7cc44a0a4 100644 --- a/conf/gnss-sdr_GLONASS_L2_CA_ibyte.conf +++ b/conf/gnss-sdr_GLONASS_L2_CA_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -30,7 +33,6 @@ Acquisition_2G.implementation=GLONASS_L2_CA_PCPS_Acquisition Acquisition_2G.item_type=gr_complex Acquisition_2G.threshold=0.0 Acquisition_2G.pfa=0.0001 -Acquisition_2G.if=0 Acquisition_2G.doppler_max=10000 Acquisition_2G.doppler_step=250 Acquisition_2G.dump=true; @@ -41,7 +43,6 @@ Acquisition_2G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_2G.implementation=GLONASS_L2_CA_DLL_PLL_Tracking Tracking_2G.item_type=gr_complex -Tracking_2G.if=0 Tracking_2G.early_late_space_chips=0.5 Tracking_2G.pll_bw_hz=20.0; Tracking_2G.dll_bw_hz=2.0; diff --git a/conf/gnss-sdr_GLONASS_L2_CA_ibyte_coh_trk.conf b/conf/gnss-sdr_GLONASS_L2_CA_ibyte_coh_trk.conf index 0bdbe7739..ca1197a6d 100644 --- a/conf/gnss-sdr_GLONASS_L2_CA_ibyte_coh_trk.conf +++ b/conf/gnss-sdr_GLONASS_L2_CA_ibyte_coh_trk.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -36,7 +39,6 @@ Acquisition_1G.implementation=GLONASS_L1_CA_PCPS_Acquisition Acquisition_1G.item_type=gr_complex Acquisition_1G.threshold=0.0 Acquisition_1G.pfa=0.0001 -Acquisition_1G.if=0 Acquisition_1G.doppler_max=10000 Acquisition_1G.doppler_step=250 Acquisition_1G.dump=false; @@ -47,7 +49,6 @@ Acquisition_1G.dump_filename=/archive/glo_acquisition.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1G.implementation=GLONASS_L1_CA_DLL_PLL_C_Aid_Tracking Tracking_1G.item_type=gr_complex -Tracking_1G.if=0 Tracking_1G.early_late_space_chips=0.5 Tracking_1G.pll_bw_hz=40.0; Tracking_1G.dll_bw_hz=3.0; diff --git a/conf/gnss-sdr_GPS_L1_2ch_fmcomms2_realtime.conf b/conf/gnss-sdr_GPS_L1_2ch_fmcomms2_realtime.conf index 79a57f712..f53fe2ea6 100644 --- a/conf/gnss-sdr_GPS_L1_2ch_fmcomms2_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_2ch_fmcomms2_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; diff --git a/conf/gnss-sdr_GPS_L1_CA_ibyte.conf b/conf/gnss-sdr_GPS_L1_CA_ibyte.conf index 8bef7d1c0..959181078 100644 --- a/conf/gnss-sdr_GPS_L1_CA_ibyte.conf +++ b/conf/gnss-sdr_GPS_L1_CA_ibyte.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## diff --git a/conf/gnss-sdr_GPS_L1_FPGA.conf b/conf/gnss-sdr_GPS_L1_FPGA.conf index 5def11d31..c6bb2edfc 100644 --- a/conf/gnss-sdr_GPS_L1_FPGA.conf +++ b/conf/gnss-sdr_GPS_L1_FPGA.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -35,12 +38,11 @@ Channel.enable_FPGA=true ;######### ACQUISITION GLOBAL CONFIG ############ +Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fpga Acquisition_1C.dump=false Acquisition_1C.dump_filename=./acq_dump.dat Acquisition_1C.item_type=cshort -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 -Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fpga +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.select_queue_Fpga=0; Acquisition_1C.threshold=0.005 ;Acquisition_1C.pfa=0.01 @@ -50,7 +52,6 @@ Acquisition_1C.doppler_step=500 ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking_Fpga Tracking_1C.item_type=cshort -Tracking_1C.if=0 Tracking_1C.dump=false Tracking_1C.dump_filename=../data/epl_tracking_ch_ Tracking_1C.pll_bw_hz=45.0; @@ -60,7 +61,6 @@ Tracking_1C.order=3; ;######### TELEMETRY DECODER GPS CONFIG ############ TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false -TelemetryDecoder_1C.decimation_factor=1; ;######### OBSERVABLES CONFIG ############ Observables.implementation=GPS_L1_CA_Observables diff --git a/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf b/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf index 082a1b3f4..bc99d4a28 100644 --- a/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_GN3S_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -68,8 +71,7 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.008 Acquisition_1C.doppler_max=10000 Acquisition_1C.doppler_step=500 @@ -79,7 +81,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=45.0; Tracking_1C.dll_bw_hz=2.0; Tracking_1C.order=3; diff --git a/conf/gnss-sdr_GPS_L1_LimeSDR.conf b/conf/gnss-sdr_GPS_L1_LimeSDR.conf index 6ad918af0..ab1242bc7 100644 --- a/conf/gnss-sdr_GPS_L1_LimeSDR.conf +++ b/conf/gnss-sdr_GPS_L1_LimeSDR.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## diff --git a/conf/gnss-sdr_GPS_L1_SPIR.conf b/conf/gnss-sdr_GPS_L1_SPIR.conf index 4df77678f..6f3affed4 100644 --- a/conf/gnss-sdr_GPS_L1_SPIR.conf +++ b/conf/gnss-sdr_GPS_L1_SPIR.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -11,107 +13,43 @@ GNSS-SDR.internal_fs_sps=4000000 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Spir_File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/dtalogger/signals/spir/data/20Secs/20Secs_L1.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=int -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=80000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Pass_Through DataTypeAdapter.item_type=float ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter InputFilter.implementation=Freq_Xlating_Fir_Filter -;InputFilter.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=float - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.45 InputFilter.band2_begin=0.55 InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter.sampling_frequency=80000000 InputFilter.IF=10164 InputFilter.decimation_factor=20 @@ -119,105 +57,58 @@ InputFilter.decimation_factor=20 ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal Resampler.sample_freq_in=80000000 -;#sample_freq_out: the desired sample frequency of the output signal Resampler.sample_freq_out=4000000 -;#dump: Dump the resamplered data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=10 -;#count: Number of available Galileo satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring Channels.in_acquisition=1 -;#signal: -;# "1C" GPS L1 C/A -;# "1B" Galileo E1B Channel.signal=1C -;Galileo FM3 -> PRN 19 -;Galileo FM4 -> PRN 20 ;######### CHANNEL 0 CONFIG ############ - -;Channel0.signal=1B -;#satellite: Satellite PRN ID for this channel. Disable this option to random search ;Channel0.satellite=20 ;######### CHANNEL 1 CONFIG ############ -;Channel1.signal=1B ;Channel1.satellite=12 ;######### CHANNEL 2 CONFIG ############ -;Channel2.signal=1B -;#satellite: Satellite PRN ID for this channel. Disable this option to random search ;Channel2.satellite=11 ;######### CHANNEL 3 CONFIG ############ -;Channel3.signal=1B ;Channel3.satellite=19 ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.005 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_min=-10000 -;#doppler_step Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#maximum dwells Acquisition_1C.max_dwells=5 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=20.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] -Tracking_1 -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false @@ -225,9 +116,7 @@ TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ ;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -237,20 +126,12 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1 ms) [ms] PVT.output_rate_ms=500 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# RINEX, KML, and NMEA output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=true; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf b/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf index aaef910d3..89f84fd77 100644 --- a/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Configuration file for using USRP X300 as a RF front-end for GPS L1 signals. ; Set SignalSource.device_address to the IP address of your device ; and run: @@ -26,154 +29,66 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -; # implementation: SignalSource.implementation=UHD_Signal_Source -; # When left empty, the device discovery routines will search all vailable transports on the system (ethernet, usb...) SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE -; # item_type: Type and resolution for each of the signal samples. -;SignalSource.item_type=gr_complex SignalSource.item_type=cshort -; # sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 -; # freq: RF front-end center frequency in [Hz] SignalSource.freq=1575420000 -; # gain: Front-end Gain in [dB] SignalSource.gain=40 -; # subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0) SignalSource.subdevice=A:0 -; # samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -; # repeat: Repeat the processing file. SignalSource.repeat=false -; # dump: Dump the Signal source data to a file. SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner -;SignalConditioner.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Pass_Through DataTypeAdapter.item_type=cshort -;DataTypeAdapter.item_type=cbyte ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter -;InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=cshort - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=11 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.48 InputFilter.band2_begin=0.52 InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter.sampling_frequency=4000000 InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal Resampler.sample_freq_in=4000000 -;#sample_freq_out: the desired sample frequency of the output signal Resampler.sample_freq_out=4000000 -;#dump: Dump the resampled data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#count: Number of available Galileo satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#system: GPS, GLONASS, GALILEO, SBAS or COMPASS -;#if the option is disabled by default is assigned GPS -;Channel.system=GPS Channel.signal=1C -;#if the option is disabled by default is assigned "1C" GPS L1 C/A ;Channel0.signal=1C ;Channel1.signal=1C @@ -188,68 +103,28 @@ Channel.signal=1C ;Channel10.signal=1C ;Channel11.signal=1C -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options - -;######### CHANNEL 0 CONFIG ############ - -;Channel0.system=GPS -;Channel0.signal=1C - -;#satellite: Satellite PRN ID for this channel. Disable this option to random search -;Channel0.satellite=11 - -;######### CHANNEL 1 CONFIG ############ - -;Channel1.system=GPS -;Channel1.signal=1C -;Channel1.satellite=18 - - ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.01 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.00001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=8000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] (should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=30.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=4.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ @@ -259,35 +134,23 @@ TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_GPS_L1_USRP_realtime.conf b/conf/gnss-sdr_GPS_L1_USRP_realtime.conf index 72fa42adf..1cb41801f 100644 --- a/conf/gnss-sdr_GPS_L1_USRP_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_USRP_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Configuration file for using USRP 1 as a RF front-end for GPS L1 signals. ; Run: ; gnss-sdr --config_file=/path/to/gnss-sdr_GPS_L1_USRP_realtime.conf @@ -25,145 +28,27 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=UHD_Signal_Source -;#When left empty, the device discovery routines will search all available transports on the system (ethernet, usb...) ;SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=gr_complex -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=2000000 -;#freq: RF front-end center frequency in [Hz] SignalSource.freq=1575420000 -;#gain: Front-end Gain in [dB] SignalSource.gain=60 -;#subdevice: UHD subdevice specification (for USRP1 use A:0 or B:0) SignalSource.subdevice=A:0 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#dump: Dump the Signal source data to a file. SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;SignalConditioner.implementation=Signal_Conditioner SignalConditioner.implementation=Pass_Through -;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. Please disable it in this version. -;#implementation: [Pass_Through] disables this block -DataTypeAdapter.implementation=Pass_Through - -;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter -InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. -InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. -InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=2000000 -InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. -InputFilter.dump=false - -;#dump_filename: Log path and filename. -InputFilter.dump_filename=../data/input_filter.dat - - -;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler -Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. -Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal -Resampler.sample_freq_in=8000000 -;#sample_freq_out: the desired sample frequency of the output signal -Resampler.sample_freq_out=2000000 -;#dump: Dump the resamplered data to a file. -Resampler.dump=false -;#dump_filename: Log path and filename. -Resampler.dump_filename=../data/resampler.dat - ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=6 -;#count: Number of available Galileo satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 @@ -175,86 +60,42 @@ Channels.in_acquisition=1 ;# "5X" GALILEO E5a I+Q ;# "L5" GPS L5 -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel.signal=1C -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options - -;######### CHANNEL 0 CONFIG ############ - -;Channel0.system=GPS -;Channel0.signal=1C - -;#satellite: Satellite PRN ID for this channel. Disable this option to random search -;Channel0.satellite=11 - -;######### CHANNEL 1 CONFIG ############ - -;Channel1.system=GPS -;Channel1.signal=1C -;Channel1.satellite=18 - ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.01 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] (should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=30.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=4.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -264,21 +105,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf b/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf index 1cd08b216..1f74645fb 100644 --- a/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf +++ b/conf/gnss-sdr_GPS_L1_acq_QuickSync.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -12,233 +14,87 @@ GNSS-SDR.internal_fs_sps=4000000 ;######### SIGNAL_SOURCE CONFIG ############ SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE SignalSource.item_type=ishort -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: Use [Ishort_To_Complex] or [Pass_Through] DataTypeAdapter.implementation=Ishort_To_Complex -;#dump: Dump the filtered data to a file. DataTypeAdapter.dump=false -;#dump_filename: Log path and filename. DataTypeAdapter.dump_filename=../data/data_type_adapter.dat ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -;InputFilter.band1_end=0.8 -InputFilter.band1_end=0.85 -InputFilter.band2_begin=0.90 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=4000000 -InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal Resampler.sample_freq_in=4000000 -;#sample_freq_out: the desired sample frequency of the output signal Resampler.sample_freq_out=4000000 -;#dump: Dump the resamplered data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available satellite channels. Channels_1C.count=5 -;#in_acquisition: Number of channels simultaneously acquiring Channels.in_acquisition=1 -;######### CHANNEL 0 CONFIG ############ -Channel0.signal=1C -Channel0.satellite=1 -Channel0.repeat_satellite=false - -;######### CHANNEL 1 CONFIG ############ -Channel1.signal=1C -Channel1.satellite=11 -Channel1.repeat_satellite=false - -;######### CHANNEL 2 CONFIG ############ -Channel2.signal=1C -Channel2.satellite=17 -Channel2.repeat_satellite=false - -;######### CHANNEL 3 CONFIG ############ -Channel3.signal=1C -Channel3.satellite=20 -Channel3.repeat_satellite=false - -;######### CHANNEL 4 CONFIG ############ -Channel4.signal=1C -Channel4.satellite=32 -Channel4.repeat_satellite=false - ;######### ACQUISITION GLOBAL CONFIG ############_1C Acquisition_1C.implementation=GPS_L1_CA_PCPS_QuickSync_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent-integration_time_ms=4 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=true -;#filename: Log path and filename ;Acquisition_1C.dump_filename=./acq_dump.dat ;######### ACQUISITION CHANNELS CONFIG ###### Acquisition_1C.implementation=GPS_L1_CA_PCPS_QuickSync_Acquisition -;#threshold: Acquisition threshold Acquisition_1C.threshold=0.4 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#repeat_satellite: Use only jointly with the satellte PRN ID option. ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=50.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=4.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5 -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A. TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1 ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea PVT.flag_nmea_tty_port=true @@ -246,7 +102,5 @@ PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_GPS_L1_bladeRF.conf b/conf/gnss-sdr_GPS_L1_bladeRF.conf index 84fe13d8b..48017a8ec 100644 --- a/conf/gnss-sdr_GPS_L1_bladeRF.conf +++ b/conf/gnss-sdr_GPS_L1_bladeRF.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -17,8 +20,7 @@ SignalSource.if_gain=48 SignalSource.AGC_enabled=false SignalSource.samples=0 SignalSource.repeat=false -;# Next line enables the bladeRF -SignalSource.osmosdr_args=bladerf=0 +SignalSource.osmosdr_args=bladerf=0 ; This line enables the bladeRF SignalSource.enable_throttle_control=false SignalSource.dump=false SignalSource.dump_filename=./signal_source.dat @@ -63,11 +65,9 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.015 Acquisition_1C.doppler_max=10000 -Acquisition_1C.doppler_min=-10000 Acquisition_1C.doppler_step=500 Acquisition_1C.max_dwells=15 Acquisition_1C.dump=false @@ -76,7 +76,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=40.0; Tracking_1C.dll_bw_hz=2.0; Tracking_1C.order=3; @@ -89,7 +88,6 @@ TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -#Observables.implementation=GPS_L1_CA_Observables Observables.implementation=Hybrid_Observables Observables.dump=false Observables.dump_filename=./observables.dat diff --git a/conf/gnss-sdr_GPS_L1_fmcomms2_realtime.conf b/conf/gnss-sdr_GPS_L1_fmcomms2_realtime.conf index 67fe037f8..17880d8a2 100644 --- a/conf/gnss-sdr_GPS_L1_fmcomms2_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_fmcomms2_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -5,9 +8,6 @@ [GNSS-SDR] ;######### GLOBAL OPTIONS ################## -;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [Sps]. -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ GNSS-SDR.internal_fs_sps=2000000 @@ -73,10 +73,6 @@ InputFilter.sampling_frequency=2000000 InputFilter.IF=0; IF deviation due to front-end LO inaccuracies [Hz] ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;# DISABLED IN THE RTL-SDR REALTIME -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block Resampler.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ @@ -88,12 +84,10 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.015 ;Acquisition_1C.pfa=0.0001 Acquisition_1C.doppler_max=10000 -Acquisition_1C.doppler_min=-10000 Acquisition_1C.doppler_step=500 Acquisition_1C.max_dwells=15 Acquisition_1C.dump=false @@ -103,7 +97,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.dump=false Tracking_1C.dump_filename=./tracking_ch_ Tracking_1C.pll_bw_hz=40.0; @@ -115,7 +108,6 @@ Tracking_1C.early_late_space_chips=0.5; ;######### TELEMETRY DECODER GPS CONFIG ############ TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false -TelemetryDecoder_1C.decimation_factor=1; ;######### OBSERVABLES CONFIG ############ diff --git a/conf/gnss-sdr_GPS_L1_gr_complex.conf b/conf/gnss-sdr_GPS_L1_gr_complex.conf index 99118a0c4..0cf4d146c 100644 --- a/conf/gnss-sdr_GPS_L1_gr_complex.conf +++ b/conf/gnss-sdr_GPS_L1_gr_complex.conf @@ -1,19 +1,23 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf -; + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## ;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second]. -GNSS-SDR.internal_fs_sps=2600000 +GNSS-SDR.internal_fs_sps=4000000 ;######### SIGNAL_SOURCE CONFIG ############ SignalSource.implementation=File_Signal_Source -SignalSource.filename=/home/javier/gnss/gnss-simulator/build/signal_out.bin ; <- PUT YOUR FILE HERE -SignalSource.item_type=byte -SignalSource.sampling_frequency=2600000 +SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE +SignalSource.item_type=ishort +SignalSource.sampling_frequency=4000000 +SignalSource.freq=1575420000 SignalSource.samples=0 SignalSource.repeat=false SignalSource.enable_throttle_control=false @@ -22,12 +26,8 @@ SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ SignalConditioner.implementation=Signal_Conditioner -;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block -DataTypeAdapter.implementation=Ibyte_To_Complex +DataTypeAdapter.implementation=Ishort_To_Complex DataTypeAdapter.dump=false -;#dump_filename: Log path and filename. DataTypeAdapter.dump_filename=../data/DataTypeAdapter.dat InputFilter.implementation=Pass_Through @@ -47,9 +47,8 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 -Acquisition_1C.threshold=0.05 +Acquisition_1C.coherent_integration_time_ms=1 +Acquisition_1C.threshold=0.008 ;Acquisition_1C.pfa=0.01 Acquisition_1C.doppler_max=10000 Acquisition_1C.doppler_step=250 @@ -60,9 +59,10 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 -Tracking_1C.pll_bw_hz=25.0; -Tracking_1C.dll_bw_hz=1.0; +Tracking_1C.dump=true +Tracking_1C.dump_filename=epl_tracking_ch_ +Tracking_1C.pll_bw_hz=40.0; +Tracking_1C.dll_bw_hz=4.0; Tracking_1C.order=3; Tracking_1C.dump=false Tracking_1C.dump_filename=../data/epl_tracking_c diff --git a/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf b/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf index 0111fc5e9..7ecb75715 100644 --- a/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf +++ b/conf/gnss-sdr_GPS_L1_gr_complex_gpu.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -33,8 +36,7 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.005 ;Acquisition_1C.pfa=0.01 Acquisition_1C.doppler_max=10000 @@ -46,7 +48,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking_GPU Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.dump=false Tracking_1C.dump_filename=../data/epl_tracking_ch_ Tracking_1C.pll_bw_hz=45.0; diff --git a/conf/gnss-sdr_GPS_L1_ishort.conf b/conf/gnss-sdr_GPS_L1_ishort.conf index e3395c982..a9528d183 100644 --- a/conf/gnss-sdr_GPS_L1_ishort.conf +++ b/conf/gnss-sdr_GPS_L1_ishort.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -13,7 +16,7 @@ ControlThread.wait_for_flowgraph=false ;######### SIGNAL_SOURCE CONFIG ############ SignalSource.implementation=File_Signal_Source -SignalSource.filename=/archive/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ;/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE +SignalSource.filename=/archive/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE SignalSource.item_type=ishort SignalSource.sampling_frequency=4000000 SignalSource.samples=0 @@ -26,18 +29,12 @@ SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ SignalConditioner.implementation=Signal_Conditioner -;DataTypeAdapter.implementation=Ishort_To_Complex DataTypeAdapter.implementation=Ishort_To_Cshort InputFilter.implementation=Pass_Through -;InputFilter.input_item_type=gr_complex -;InputFilter.output_item_type=gr_complex InputFilter.item_type=cshort -;Resampler.implementation=Pass_Through -;Resampler.item_type=gr_complex Resampler.implementation=Direct_Resampler Resampler.sample_freq_in=4000000 Resampler.sample_freq_out=2000000 -;Resampler.item_type=gr_complex Resampler.item_type=cshort ;######### CHANNELS GLOBAL CONFIG ############ @@ -49,39 +46,33 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=cshort -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.008 ;Acquisition_1C.pfa=0.000001 Acquisition_1C.doppler_max=10000 Acquisition_1C.doppler_step=250 -Acquisition_1C.tong_init_val=2 -Acquisition_1C.tong_max_val=10 -Acquisition_1C.tong_max_dwells=20 Acquisition_1C.dump=false Acquisition_1C.dump_filename=./acq_dump.dat - +Acquisition_1C.blocking=false; ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking Tracking_1C.item_type=cshort -Tracking_1C.if=0 -Tracking_1C.dump=false -Tracking_1C.dump_filename=../data/epl_tracking_ch_ Tracking_1C.pll_bw_hz=40.0; Tracking_1C.dll_bw_hz=4.0; Tracking_1C.order=3; +Tracking_1C.dump=false; +Tracking_1C.dump_filename=./epl_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false -TelemetryDecoder_1C.decimation_factor=1; ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -Observables.dump=false +Observables.dump=true Observables.dump_filename=./observables.dat diff --git a/conf/gnss-sdr_GPS_L1_nsr.conf b/conf/gnss-sdr_GPS_L1_nsr.conf index ec085add3..5e2bee6ba 100644 --- a/conf/gnss-sdr_GPS_L1_nsr.conf +++ b/conf/gnss-sdr_GPS_L1_nsr.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Sample configuration file for IFEN SX-NSR software receiver front-end ; http://www.ifen.com/products/sx-scientific-gnss-solutions/nsr-software-receiver.html ; This sample configuration is able to process directly .sream binary files @@ -80,18 +83,15 @@ Resampler.item_type=gr_complex ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=0 Channels_2S.count=8 Channels.in_acquisition=1 -#Channel.signal=1C ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.scoherent_integration_time_ms=1 Acquisition_1C.threshold=0.0075 ;Acquisition_1C.pfa=0.01 Acquisition_1C.doppler_max=10000 @@ -101,7 +101,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.coherent_integration_time_ms=20 Acquisition_2S.threshold=0.00045 Acquisition_2S.doppler_max=5000 @@ -115,7 +114,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=45.0; Tracking_1C.dll_bw_hz=2.0; Tracking_1C.order=3; @@ -125,7 +123,6 @@ Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### GPS L2C GENERIC TRACKING CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=1.5; Tracking_2S.dll_bw_hz=0.4; Tracking_2S.order=2; @@ -143,11 +140,8 @@ TelemetryDecoder_2S.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat diff --git a/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf b/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf index db5e6d23a..dffa01314 100644 --- a/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf +++ b/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Sample configuration file for IFEN SX-NSR software receiver front-end ; http://www.ifen.com/products/sx-scientific-gnss-solutions/nsr-software-receiver.html ; This sample configuration is able to process directly .sream binary files @@ -94,7 +97,6 @@ Resampler.item_type=gr_complex ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 Channels.in_acquisition=1 Channel.signal=1C diff --git a/conf/gnss-sdr_GPS_L1_plutosdr_realtime.conf b/conf/gnss-sdr_GPS_L1_plutosdr_realtime.conf index 83f808645..d3be2c6b6 100644 --- a/conf/gnss-sdr_GPS_L1_plutosdr_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_plutosdr_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; diff --git a/conf/gnss-sdr_GPS_L1_pulse_blanking_gr_complex.conf b/conf/gnss-sdr_GPS_L1_pulse_blanking_gr_complex.conf index 8cd02bd32..4f68bdb08 100644 --- a/conf/gnss-sdr_GPS_L1_pulse_blanking_gr_complex.conf +++ b/conf/gnss-sdr_GPS_L1_pulse_blanking_gr_complex.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,51 +27,26 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/home/javier/signals/signal_source_int.dat -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=2000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. Disable this option in this version SignalSource.repeat=false -;#dump: Dump the Signal source data to a file. Disable this option in this version SignalSource.dump=false SignalSource.dump_filename=dump.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#[Pass_Through] disables this block InputFilter.implementation=Pulse_Blanking_Filter - InputFilter.Pfa=0.001 -;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version. InputFilter.output_item_type=gr_complex - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat ;######### CHANNELS GLOBAL CONFIG ############ @@ -81,12 +58,8 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 -;#use_CFAR_algorithm: If enabled, acquisition estimates the input signal power to implement CFAR detection algorithms -;#notice that this affects the Acquisition threshold range! +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.use_CFAR_algorithm=false; -;#threshold: Acquisition threshold Acquisition_1C.threshold=20 ;Acquisition_1C.pfa=0.01 Acquisition_1C.doppler_max=5000 @@ -97,27 +70,15 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;# Extended correlation after telemetry bit synchronization -;# Valid values are: [1,2,4,5,10,20] (integer divisors of the GPS L1 CA bit period (20 ms) ) -;# Longer integration period require more stable front-end LO Tracking_1C.extend_correlation_ms=10 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=35; Tracking_1C.pll_bw_narrow_hz=30; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; Tracking_1C.dll_bw_narrow_hz=1.5; -;#fll_bw_hz: FLL loop filter bandwidth [Hz] Tracking_1C.fll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ diff --git a/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf b/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf index 944a1ba36..01b30c02a 100644 --- a/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -29,119 +31,48 @@ GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ ;#implementation SignalSource.implementation=RtlTcp_Signal_Source -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. -SignalSource.item_type=gr_complex -;#sampling_frequency: Original Signal sampling frequency in samples per second -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ SignalSource.sampling_frequency=1200000 -;#freq: RF front-end center frequency in [Hz] SignalSource.freq=1575420000 -;#gain: Front-end overall gain Gain in [dB] SignalSource.gain=40 -;#rf_gain: Front-end RF stage gain in [dB] SignalSource.rf_gain=40 -;#rf_gain: Front-end IF stage gain in [dB] SignalSource.if_gain=30 -;#AGC_enabled: Front-end AGC enabled or disabled SignalSource.AGC_enabled = false -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. Disable this option in this version SignalSource.repeat=false -;#dump: Dump the Signal source data to a file. Disable this option in this version SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false - -;#Address of the rtl_tcp server (IPv6 allowed) SignalSource.address=127.0.0.1 - -;#Port of the rtl_tcp server SignalSource.port=1234 - -;# Set to true if I/Q samples come swapped SignalSource.swap_iq=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Pass_Through ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.45 InputFilter.band2_begin=0.55 InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 ;#The following options are used only in Freq_Xlating_Fir_Filter implementation. @@ -149,22 +80,15 @@ InputFilter.grid_density=16 ;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE ; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter.sampling_frequency=1200000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter.IF=80558 ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;# DISABLED IN THE RTL-SDR REALTIME -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block Resampler.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=4 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 Channel.signal=1C @@ -172,52 +96,30 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms =1 Acquisition_1C.threshold=0.015 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_min=-10000 -;#doppler_step Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#maximum dwells Acquisition_1C.max_dwells=15 Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false @@ -225,9 +127,7 @@ TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ ;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -237,21 +137,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=true -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf b/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf index b4e025f6f..18d783741 100644 --- a/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf +++ b/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -88,10 +91,6 @@ InputFilter.sampling_frequency=1999898 InputFilter.IF=80558 ; IF deviation due to front-end LO inaccuracies [Hz] ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;# DISABLED IN THE RTL-SDR REALTIME -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block Resampler.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ @@ -103,8 +102,7 @@ Channel.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.015 ;Acquisition_1C.pfa=0.0001 Acquisition_1C.doppler_max=10000 @@ -118,7 +116,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.dump=false Tracking_1C.dump_filename=./tracking_ch_ Tracking_1C.pll_bw_hz=40.0; @@ -139,7 +136,6 @@ Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX diff --git a/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf b/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf index f6e2ec730..1cf1ac378 100644 --- a/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf +++ b/conf/gnss-sdr_GPS_L1_two_bits_cpx.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -84,8 +87,7 @@ Channel.signal=1C ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.007 ;Acquisition_1C.pfa=0.0001 Acquisition_1C.doppler_max=10000 @@ -99,7 +101,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0_ Tracking_1C.pll_bw_hz=40.0; Tracking_1C.dll_bw_hz=1.5; Tracking_1C.order=3; diff --git a/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf b/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf index 97710c4f0..362e747a3 100644 --- a/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf +++ b/conf/gnss-sdr_GPS_L2C_USRP1_realtime.conf @@ -1,7 +1,11 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Configuration file for using USRP1 as a RF front-end for GPS L2C signals ; Run: ; gnss-sdr --config_file=/path/to/gnss-sdr_GPS_L2C_USRP1_realtime.conf ; + [GNSS-SDR] ;######### GLOBAL OPTIONS ################## @@ -46,81 +50,29 @@ DataTypeAdapter.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter.implementation=Freq_Xlating_Fir_Filter - -InputFilter.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.45 InputFilter.band2_begin=0.55 InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter.sampling_frequency=20000000 - InputFilter.IF=-1600000 - -;# Decimation factor after the frequency tranaslating block InputFilter.decimation_factor=1 - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. +InputFilter.dump_filename=../data/input_filter.dat ;######### RESAMPLER CONFIG ############ @@ -133,9 +85,7 @@ Resampler.sample_freq_out=2000000 ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_2S.count=1 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 Channel.signal=2S @@ -155,14 +105,11 @@ Channel7.signal=2S ;######### ACQUISITION GLOBAL CONFIG ############ -;# GPS L2C M Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.threshold=0.0013 ;Acquisition_2S.pfa=0.001 Acquisition_2S.doppler_max=10000 -Acquisition_2S.doppler_min=-10000 Acquisition_2S.doppler_step=100 Acquisition_2S.max_dwells=1 Acquisition_2S.dump=false @@ -172,7 +119,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=1.5; Tracking_2S.dll_bw_hz=0.3; Tracking_2S.order=3; diff --git a/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf b/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf index caaf4536c..1572b45cd 100644 --- a/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf +++ b/conf/gnss-sdr_GPS_L2C_USRP_X300_realtime.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; Configuration file for using USRP X300 as a RF front-end for GPS L2C signals ; Set SignalSource.device_address to the IP address of your device ; and run: @@ -87,9 +90,7 @@ Resampler.sample_freq_out=4000000 ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_2S.count=1 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 Channel.signal=2S @@ -112,7 +113,6 @@ Channel7.signal=2S ;# GPS L2C M Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.threshold=0.0015 ;Acquisition_2S.pfa=0.001 Acquisition_2S.doppler_max=5000 @@ -125,7 +125,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=2.0; Tracking_2S.dll_bw_hz=0.25; Tracking_2S.order=2; diff --git a/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf b/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf index 54e092708..aad3dd417 100644 --- a/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf +++ b/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf @@ -38,8 +38,7 @@ Channel.signal=1B ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition Acquisition_1B.item_type=gr_complex -Acquisition_1B.if=0 -Acquisition_1B.sampled_ms=4 +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=1 Acquisition_1B.pfa=0.000008 Acquisition_1B.doppler_max=6000 @@ -52,7 +51,6 @@ Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking Tracking_1B.item_type=gr_complex -Tracking_1B.if=0 Tracking_1B.pll_bw_hz=20.0; Tracking_1B.dll_bw_hz=2.0; Tracking_1B.order=3; diff --git a/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf b/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf index ab6802559..2653a1402 100644 --- a/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf +++ b/conf/gnss-sdr_Galileo_E1_acq_QuickSync.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -10,259 +13,86 @@ GNSS-SDR.internal_fs_sps=4000000 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation: SignalSource.implementation=File_Signal_Source - -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE - -;#item_type: Type and resolution for each of the signal samples. -;#Use gr_complex for 32 bits float I/Q or ishort for I/Q interleaved short integer. -;#If ishort is selected you should have to instantiate the Ishort_To_Complex data_type_adapter. SignalSource.item_type=ishort - -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 - -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 - -;#repeat: Repeat the processing file. SignalSource.repeat=false - -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: Use [Ishort_To_Complex] or [Pass_Through] DataTypeAdapter.implementation=Ishort_To_Complex -;#dump: Dump the filtered data to a file. DataTypeAdapter.dump=false -;#dump_filename: Log path and filename. DataTypeAdapter.dump_filename=../data/data_type_adapter.dat ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter InputFilter.implementation=Pass_Through -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. -InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. -InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -#used for gps -InputFilter.band1_begin=0.0 -;InputFilter.band1_end=0.8 -InputFilter.band1_end=0.85 -InputFilter.band2_begin=0.90 -InputFilter.band2_end=1.0 - -#used for galileo -InputFilter.band1_begin=0.0 -;InputFilter.band1_end=0.8 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz -InputFilter.sampling_frequency=4000000 -InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. -InputFilter.dump=false - -;#dump_filename: Log path and filename. -InputFilter.dump_filename=../data/input_filter.dat - ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through - -;#dump: Dump the resamplered data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat - -;#item_type: Type and resolution for each of the signal samples. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal -Resampler.sample_freq_in=4000000 - -;#sample_freq_out: the desired sample frequency of the output signal -Resampler.sample_freq_out=4000000 - ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available satellite channels. Channels_1B.count=4 -;#in_acquisition: Number of channels simultaneously acquiring Channels.in_acquisition=1 Channel.signal=1B ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_QuickSync_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1B.coherent_integration_time_ms=4 -;#threshold: Acquisition threshold Acquisition_1B.threshold=0.05 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms]; Acquisition_1B.coherent_integration_time_ms=8 Acquisition_1B.cboc=false -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ -;#implementation: Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=20.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] -Tracking_1B.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. +Tracking_1B.dump=false Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A or [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables - -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false - -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation algorithm: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad - -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; - -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; - -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false - -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT - -;# KML, GeoJSON, NMEA and RTCM output configuration - -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump, ".kml" and ".geojson" to GIS-friendly formats. PVT.dump_filename=./PVT - -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; - -;#flag_nmea_tty_port: Enables or disables the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=true; - -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 - -;#flag_rtcm_server: Enables or disables a TCP/IP server transmitting RTCM 3.2 messages (accepts multiple clients, port 2101 by default) PVT.flag_rtcm_server=false; - -;#flag_rtcm_tty_port: Enables or disables the RTCM log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_rtcm_tty_port=false; - -;#rtcm_dump_devname: serial device descriptor for RTCM logging PVT.rtcm_dump_devname=/dev/pts/1 diff --git a/conf/gnss-sdr_Galileo_E1_ishort.conf b/conf/gnss-sdr_Galileo_E1_ishort.conf index 2f051700a..22a64245d 100644 --- a/conf/gnss-sdr_Galileo_E1_ishort.conf +++ b/conf/gnss-sdr_Galileo_E1_ishort.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -11,190 +14,65 @@ GNSS-SDR.internal_fs_sps=4000000 ;######### SIGNAL_SOURCE CONFIG ############ SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=ishort -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. -SignalSource.enable_throttle_control=false +SignalSource.enable_throttle_control=true ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Ishort_To_Complex ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of GNU Radio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=4000000 -InputFilter.IF=0 -;#dump: Dump the filtered data to a file. -InputFilter.dump=false -;#dump_filename: Log path and filename. -InputFilter.dump_filename=../data/input_filter.dat - - ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neighborhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal Resampler.sample_freq_in=4000000 -;#sample_freq_out: the desired sample frequency of the output signal Resampler.sample_freq_out=4000000 -;#dump: Dump the resampled data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available Galileo satellite channels. Channels_1B.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 Channel.signal=1B ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] -Acquisition_1B.pfa=0.000002 -;#doppler_max: Maximum expected Doppler shift [Hz] +Acquisition_1B.pfa=0.00001 Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#cboc: Only for [Galileo_E1_PCPS_Ambiguous_Acquisition]. This option allows you to choose between acquiring with CBOC signal [true] or sinboc(1,1) signal [false]. -;#Use only if GNSS-SDR.internal_fs_sps is greater than or equal to 6138000 Acquisition_1B.cboc=false -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat - - -;######### ACQUISITION CHANNELS CONFIG ###### - -;######### ACQUISITION CH 0 CONFIG ############ -;#repeat_satellite: Use only jointly with the satellite PRN ID option. The default value is false -;Acquisition_1B0.repeat_satellite = true -;Acquisition_1B1.repeat_satellite = true -;Acquisition_1B2.repeat_satellite = true -;Acquisition_1B3.repeat_satellite = true +Acquisition_1B.blocking=false ;######### TRACKING GLOBAL CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] -Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] -Tracking_1B.dll_bw_hz=2.0; -;#fll_bw_hz: FLL loop filter bandwidth [Hz] -Tracking_1B.fll_bw_hz=10.0; -;#order: PLL/DLL loop filter order [2] or [3] -Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo +Tracking_1B.dump=true +Tracking_1B.dump_filename=./veml_tracking_ch_ +Tracking_1B.pll_bw_hz=20.0; +Tracking_1B.dll_bw_hz=3.0; Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; Tracking_1B.track_pilot=true -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ @@ -205,39 +83,25 @@ TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enables or disables the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=true -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 -;#flag_rtcm_server: Enables or disables a TCP/IP server transmitting RTCM 3.2 messages (accepts multiple clients, port 2101 by default) PVT.flag_rtcm_server=true; PVT.rtcm_tcp_port=2101 PVT.rtcm_MT1045_rate_ms=5000 PVT.rtcm_MSM_rate_ms=1000 -;#flag_rtcm_tty_port: Enables or disables the RTCM log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_rtcm_tty_port=false; -;#rtcm_dump_devname: serial device descriptor for RTCM logging PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump, ".kml" and ".geojson" to GIS-friendly formats. PVT.dump_filename=./PVT \ No newline at end of file diff --git a/conf/gnss-sdr_Galileo_E1_nsr.conf b/conf/gnss-sdr_Galileo_E1_nsr.conf index f7ca01480..7350f5314 100644 --- a/conf/gnss-sdr_Galileo_E1_nsr.conf +++ b/conf/gnss-sdr_Galileo_E1_nsr.conf @@ -1,3 +1,6 @@ +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -21,15 +24,10 @@ SignalSource.samples=0 ; 0 means the entire file SignalSource.repeat=false SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat - - -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ @@ -78,8 +76,7 @@ Channel.signal=1B ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition Acquisition_1B.item_type=gr_complex -Acquisition_1B.if=0 -Acquisition_1B.sampled_ms=4 +Acquisition_1B.coherent_integration_time_ms=4 Acquisition_1B.pfa=0.0000008 Acquisition_1B.doppler_max=15000 Acquisition_1B.doppler_step=125 @@ -91,7 +88,6 @@ Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking Tracking_1B.item_type=gr_complex -Tracking_1B.if=0 Tracking_1B.pll_bw_hz=20.0; Tracking_1B.dll_bw_hz=2.0; Tracking_1B.order=3; diff --git a/conf/gnss-sdr_Galileo_E5a.conf b/conf/gnss-sdr_Galileo_E5a.conf index 702942f55..5ab3096c3 100644 --- a/conf/gnss-sdr_Galileo_E5a.conf +++ b/conf/gnss-sdr_Galileo_E5a.conf @@ -1,4 +1,3 @@ -; Default configuration file ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,159 +24,33 @@ GNSS-SDR.internal_fs_sps=32000000 ;GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/ifen/32MS_complex.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=gr_complex -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=32000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;SignalConditioner.implementation=Signal_Conditioner SignalConditioner.implementation=Pass_Through -;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block -DataTypeAdapter.implementation=Pass_Through - -;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter -InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. -InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. -InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=32000000 -InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. -InputFilter.dump=false - -;#dump_filename: Log path and filename. -InputFilter.dump_filename=../data/input_filter.dat - - -;######### RESAMPLER CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler -Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. -Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal -Resampler.sample_freq_in=8000000 -;#sample_freq_out: the desired sample frequency of the output signal -Resampler.sample_freq_out=4000000 -;#dump: Dump the resamplered data to a file. -Resampler.dump=false -;#dump_filename: Log path and filename. -Resampler.dump_filename=../data/resampler.dat - ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available satellite channels. Channels_5X.count=1 -;#in_acquisition: Number of channels simultaneously acquiring Channels.in_acquisition=1 -;#system: GPS, GLONASS, Galileo, SBAS or Compass -;#if the option is disabled by default is assigned GPS -Channel.signal=5X ;######### SPECIFIC CHANNELS CONFIG ###### ;#The following options are specific to each channel and overwrite the generic options ;######### CHANNEL 0 CONFIG ############ -;Channel0.signal=5X -;#satellite: Satellite PRN ID for this channel. Disable this option to random search ;Channel0.satellite=19 -;Channel0.repeat_satellite=true ;######### CHANNEL 1 CONFIG ############ - -;Channel1.system=Galileo -;Channel1.signal=5Q ;Channel1.satellite=12 ;######### CHANNEL 2 CONFIG ############ - -;Channel2.system=Galileo -;Channel2.signal=5Q ;Channel2.satellite=11 ;######### CHANNEL 3 CONFIG ############ @@ -188,97 +61,56 @@ Channel.signal=5X ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_5X.implementation=Galileo_E5a_Noncoherent_IQ_Acquisition_CAF -;#item_type: Type and resolution for each of the signal samples. Acquisition_5X.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_5X.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_5X.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_5X.threshold=0.001 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_5X.pfa=0.0003 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_5X.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_5X.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] (should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_5X.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_5X.max_dwells=1 -;#CAF filter: **Only for E5a** Resolves doppler ambiguity averaging the specified BW in the winner code delay. If set to 0 CAF filter is desactivated. Recommended value 3000 Hz Acquisition_5X.CAF_window_hz=0 -;#Zero_padding: **Only for E5a** Avoids power loss and doppler ambiguity in bit transitions by correlating one code with twice the input data length, ensuring that at least one full code is present without transitions. -;#If set to 1 it is ON, if set to 0 it is OFF. Acquisition_5X.Zero_padding=0 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] -Acquisition_5X.dump=true -;#filename: Log path and filename +Acquisition_5X.dump=false Acquisition_5X.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_5X.implementation=Galileo_E5a_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_5X.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_5X.if=0 -;#dll_ti_ms: **Only for E5a** loop filter integration time after initialization (secondary code delay search)[ms] -;Tracking_5X.ti_ms=3; -Tracking_5X.ti_ms=1; -;#pll_bw_hz: PLL loop filter bandwidth during initialization [Hz] Tracking_5X.pll_bw_hz=20.0; -;#dll_bw_hz: DLL loop filter bandwidth during initialization [Hz] Tracking_5X.dll_bw_hz=20.0; Tracking_5X.pll_bw_narrow_hz=2.0; Tracking_5X.dll_bw_narrow_hz=5.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_5X.order=2; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_5X.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] -Tracking_5X.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. +Tracking_5X.dump=false Tracking_5X.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER CONFIG ############ -;#implementation: TelemetryDecoder_5X.implementation=Galileo_E5a_Telemetry_Decoder TelemetryDecoder_5X.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation algorithm: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=true; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf b/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf index 661920ca0..e884778d2 100644 --- a/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf +++ b/conf/gnss-sdr_Galileo_E5a_IFEN_CTTC.conf @@ -1,4 +1,3 @@ -; Default configuration file ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -74,7 +73,7 @@ Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -Channels_5X.count=1 +Channels_5X.count=8 Channels.in_acquisition=1 Channel.signal=5X @@ -83,7 +82,7 @@ Channel.signal=5X ;######### CHANNEL 0 CONFIG ############ Channel0.signal=5X -Channel0.satellite=19 +;Channel0.satellite=19 ;Channel0.repeat_satellite=true ;######### CHANNEL 1 CONFIG ############ @@ -101,7 +100,6 @@ Channel3.signal=5X ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_5X.implementation=Galileo_E5a_Noncoherent_IQ_Acquisition_CAF Acquisition_5X.item_type=gr_complex -Acquisition_5X.if=0 Acquisition_5X.coherent_integration_time_ms=1 Acquisition_5X.threshold=0.002 Acquisition_5X.doppler_max=10000 @@ -117,10 +115,8 @@ Acquisition_5X.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_5X.implementation=Galileo_E5a_DLL_PLL_Tracking Tracking_5X.item_type=gr_complex -Tracking_5X.if=0 Tracking_5X.pll_bw_hz=20.0; Tracking_5X.dll_bw_hz=20.0; -Tracking_5X.ti_ms=1; **Only for E5a** loop filter integration time after initialization (secondary code delay search)[ms] Tracking_5X.pll_bw_narrow_hz=20.0; Tracking_5X.dll_bw_narrow_hz=20.0; Tracking_5X.order=2; diff --git a/conf/gnss-sdr_Hybrid_byte.conf b/conf/gnss-sdr_Hybrid_byte.conf index aa7caae99..bf50bcb30 100644 --- a/conf/gnss-sdr_Hybrid_byte.conf +++ b/conf/gnss-sdr_Hybrid_byte.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -12,129 +14,40 @@ GNSS-SDR.internal_fs_sps=20000000 ;######### SIGNAL_SOURCE CONFIG ############ SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/Fraunhofer/L125_III1b_210s_L1.bin ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples.. SignalSource.item_type=byte -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=20000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Ibyte_To_Complex ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples.. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=20000000 -InputFilter.IF=0 -;#dump: Dump the filtered data to a file. InputFilter.dump=false -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signal Resampler.sample_freq_in=20000000 -;#sample_freq_out: the desired sample frequency of the output signal Resampler.sample_freq_out=20000000 -;#dump: Dump the resamplered data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#count: Number of available Galileo satellite channels. Channels_1B.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -158,123 +71,75 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.0060 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000008 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=45.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=4.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_Hybrid_byte_sim.conf b/conf/gnss-sdr_Hybrid_byte_sim.conf index 7df406547..60cca8e00 100644 --- a/conf/gnss-sdr_Hybrid_byte_sim.conf +++ b/conf/gnss-sdr_Hybrid_byte_sim.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -7,139 +9,48 @@ ;######### GLOBAL OPTIONS ################## ;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second]. -;GNSS-SDR.internal_fs_sps=2048000 GNSS-SDR.internal_fs_sps=2600000 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed -;#SignalSource.filename=/home/javier/Descargas/rtlsdr_tcxo_l1/rtlsdr_tcxo_l1.bin ; <- PUT YOUR FILE HERE SignalSource.filename=/Users/carlesfernandez/git/cttc/build/signal_out.bin ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=byte -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#dump: Dump the Signal source data to a file. SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. Please disable it in this version. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Ibyte_To_Complex DataTypeAdapter.dump=false -;#dump_filename: Log path and filename. DataTypeAdapter.dump_filename=../data/DataTypeAdapter.dat ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter InputFilter.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=2600000 -InputFilter.IF=0 - - ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. Resampler.implementation=Pass_Through Resampler.item_type = gr_complex; ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=11 -;#count: Number of available Galileo satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel1.signal=1C Channel2.signal=1C Channel3.signal=1C @@ -159,109 +70,63 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] -;#use_CFAR_algorithm: If enabled, acquisition estimates the input signal power to implement CFAR detection algorithms -;#notice that this affects the Acquisition threshold range! +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.use_CFAR_algorithm=false; -;#threshold: Acquisition threshold Acquisition_1C.threshold=15 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=6000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=100 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000008 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=20.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=1.5; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ - ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -270,14 +135,10 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_Hybrid_gr_complex.conf b/conf/gnss-sdr_Hybrid_gr_complex.conf index 63f92330e..dbd9d8286 100644 --- a/conf/gnss-sdr_Hybrid_gr_complex.conf +++ b/conf/gnss-sdr_Hybrid_gr_complex.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -10,135 +12,24 @@ GNSS-SDR.internal_fs_sps=4092000 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/sim/GPS_sim1.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=gr_complex -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4092000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Pass_Through -;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block -DataTypeAdapter.implementation=Pass_Through -DataTypeAdapter.item_type=gr_complex - -;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. - -InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. -InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. -InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;# Original sampling frequency stored in the signal file -InputFilter.sampling_frequency=4092000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.IF=5499998.47412109 - -;# Decimation factor after the frequency tranaslating block -InputFilter.decimation_factor=8 - -;#dump: Dump the filtered data to a file. -InputFilter.dump=false - -;#dump_filename: Log path and filename. -InputFilter.dump_filename=../data/input_filter.dat - - -;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -Resampler.implementation=Pass_Through - ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=1 -;#count: Number of available Galileo satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#signal: -;# "1C" GPS L1 C/A -;# "2S" GPS L2 L2C (M) -;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL) -;# "5X" GALILEO E5a I+Q - ;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel0.signal=1C Channel1.signal=1B @@ -160,134 +51,80 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.use_CFAR_algorithm=false; -;#threshold: Acquisition threshold Acquisition_1C.threshold=30 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=100 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000002 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;# Extended correlation after telemetry bit synchronization -;# Valid values are: [1,2,4,5,10,20] (integer divisors of the GPS L1 CA bit period (20 ms) ) -;# Longer integration period require more stable front-end LO Tracking_1C.extend_correlation_ms=10 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40; Tracking_1C.pll_bw_narrow_hz=25; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; Tracking_1C.dll_bw_narrow_hz=2.0; -;#fll_bw_hz: FLL loop filter bandwidth [Hz] -Tracking_1C.fll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#fll_bw_hz: FLL loop filter bandwidth [Hz] Tracking_1B.fll_bw_hz=10.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=10; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_Hybrid_ishort.conf b/conf/gnss-sdr_Hybrid_ishort.conf index 6bfa9e8fa..6fc17c35c 100644 --- a/conf/gnss-sdr_Hybrid_ishort.conf +++ b/conf/gnss-sdr_Hybrid_ishort.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -28,133 +30,36 @@ GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ ;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=ishort -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=4000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Ishort_To_Complex ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - -;InputFilter.implementation=Fir_Filter -;InputFilter.implementation=Freq_Xlating_Fir_Filter InputFilter.implementation=Pass_Through - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter.band1_begin=0.0 -InputFilter.band1_end=0.45 -InputFilter.band2_begin=0.55 -InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter.ampl1_begin=1.0 -InputFilter.ampl1_end=1.0 -InputFilter.ampl2_begin=0.0 -InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter.band1_error=1.0 -InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter.sampling_frequency=4000000 -InputFilter.IF=0 - -;#dump: Dump the filtered data to a file. -InputFilter.dump=false - -;#dump_filename: Log path and filename. -InputFilter.dump_filename=../data/input_filter.dat - ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through -;#item_type: Type and resolution for each of the signal samples. Resampler.item_type=gr_complex -;#sample_freq_in: the sample frequency of the input signalq -Resampler.sample_freq_in=4000000 -;#sample_freq_out: the desired sample frequency of the output signal -Resampler.sample_freq_out=4000000 -;#dump: Dump the resamplered data to a file. Resampler.dump=false -;#dump_filename: Log path and filename. Resampler.dump_filename=../data/resampler.dat ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=0 -;#count: Number of available Galileo satellite channels. Channels_1B.count=5 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -174,120 +79,73 @@ Channel7.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.0075 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#implementation: Acquisition algorithm selection for this channel: -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000008; 0.0000008 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 Acquisition_1B.cboc=false; -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=50.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=5.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=20.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false @@ -297,7 +155,5 @@ PVT.rtcm_MT1045_rate_ms=5000 ; Period (in ms) of Galileo ephemeris messages. 0 m PVT.rtcm_MT1045_rate_ms=5000 ; Period (in ms) of GPS ephemeris messages. 0 mutes this message PVT.rtcm_MT1097_rate_ms=1000 ; Period (in ms) of Galileo observables. 0 mutes this message PVT.rtcm_MT1077_rate_ms=1000 ; Period (in ms) of GPS observables. 0 mutes this message -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_Hybrid_nsr.conf b/conf/gnss-sdr_Hybrid_nsr.conf index 2427aa101..682482991 100644 --- a/conf/gnss-sdr_Hybrid_nsr.conf +++ b/conf/gnss-sdr_Hybrid_nsr.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -7,136 +9,60 @@ ;######### GLOBAL OPTIONS ################## ;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second]. -;GNSS-SDR.internal_fs_sps=6826700 GNSS-SDR.internal_fs_sps=2560000 -;GNSS-SDR.internal_fs_sps=4096000 -;GNSS-SDR.internal_fs_sps=5120000 + ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Nsr_File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/media/javier/SISTEMA/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=byte -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=20480000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#dump: Dump the Signal source data to a file. SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Pass_Through DataTypeAdapter.item_type=float ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. - InputFilter.implementation=Freq_Xlating_Fir_Filter - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=float - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.45 InputFilter.band2_begin=0.55 InputFilter.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 - -;# Original sampling frequency stored in the signal file InputFilter.sampling_frequency=20480000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter.IF=5499998.47412109 - -;# Decimation factor after the frequency tranaslating block InputFilter.decimation_factor=8 - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation Resampler.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#count: Number of available Galileo satellite channels. Channels_1B.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -168,103 +94,59 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.0075 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000002 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;# Extended correlation after telemetry bit synchronization -;# Valid values are: [1,2,4,5,10,20] (integer divisors of the GPS L1 CA bit period (20 ms) ) -;# Longer integration period require more stable front-end LO Tracking_1C.extend_correlation_ms=1 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40; Tracking_1C.pll_bw_narrow_hz=20; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; Tracking_1C.dll_bw_narrow_hz=1.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false @@ -272,9 +154,7 @@ TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ ;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -283,14 +163,10 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=10; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_galileo_E1_extended_correlator_byte.conf b/conf/gnss-sdr_galileo_E1_extended_correlator_byte.conf index e9e5eb0f8..18d9f5307 100644 --- a/conf/gnss-sdr_galileo_E1_extended_correlator_byte.conf +++ b/conf/gnss-sdr_galileo_E1_extended_correlator_byte.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -11,62 +13,34 @@ GNSS-SDR.internal_fs_sps=20000000 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource.filename=/media/javier/SISTEMA/signals/fraunhofer/L125_III1b_210s_L1.bin ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=byte -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=20000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Ibyte_To_Complex ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - InputFilter.implementation=Pass_Through - ;######### RESAMPLER CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neighborhood interpolation -;Resampler.implementation=Direct_Resampler Resampler.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=0 -;#count: Number of available Galileo satellite channels. -Channels_1B.count=1 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver +Channels_1B.count=8 + Channels.in_acquisition=1 -;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel1.signal=1B Channel2.signal=1B Channel3.signal=1B @@ -86,132 +60,83 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 +Acquisition_1C.scoherent_integration_time_ms=1 Acquisition_1C.use_CFAR_algorithm=false; -;#threshold: Acquisition threshold Acquisition_1C.threshold=18 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 +Acquisition_1B.coherent_integration_time_ms=4 Acquisition_1B.acquire_pilot=true Acquisition_1B.use_CFAR_algorithm=false -;#threshold: Acquisition threshold Acquisition_1B.threshold=21 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 Acquisition_1B.bit_transition_flag=true -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=../data/acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=30.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] Tracking_1B.if=0 Tracking_1B.track_pilot=true -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=4.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=0.5; -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_narrow_hz=2.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_narrow_hz=0.25; Tracking_1B.extend_correlation_symbols=4; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_narrow_chips=0.06; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_narrow_chips=0.25; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] -Tracking_1B.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. +Tracking_1B.dump=false Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_galileo_E1_extended_correlator_labsat.conf b/conf/gnss-sdr_galileo_E1_extended_correlator_labsat.conf index 8b2f05195..cfbd1f73c 100644 --- a/conf/gnss-sdr_galileo_E1_extended_correlator_labsat.conf +++ b/conf/gnss-sdr_galileo_E1_extended_correlator_labsat.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -6,11 +8,9 @@ [GNSS-SDR] ;######### GLOBAL OPTIONS ################## -;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz]. GNSS-SDR.internal_fs_sps=5456000 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Labsat_Signal_Source SignalSource.selected_channel=1 ;#filename: path to file with the captured GNSS signal samples to be processed @@ -18,121 +18,58 @@ SignalSource.selected_channel=1 ;# the adapter adds "_0000.LS3" to this base path and filename. Next file will be "_0001.LS3" and so on ;# in this example, the first file complete path will be ../signals/GPS_025_0000.LS3 SignalSource.filename=../signals/GPS_025 ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource.sampling_frequency=16368000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource.samples=0 -;#repeat: Repeat the processing file. SignalSource.repeat=false -;#dump: Dump the Signal source data to a file. SignalSource.dump=false SignalSource.dump_filename=../data/signal_source.dat -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false ;######### SIGNAL_CONDITIONER CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter.implementation=Pass_Through DataTypeAdapter.item_type=gr_complex ;######### INPUT_FILTER CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. InputFilter.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter.dump=false - -;#dump_filename: Log path and filename. InputFilter.dump_filename=../data/input_filter.dat -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter.number_of_bands=2 -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter.band1_begin=0.0 InputFilter.band1_end=0.45 InputFilter.band2_begin=0.55 InputFilter.band2_end=1.0 -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter.ampl1_begin=1.0 InputFilter.ampl1_end=1.0 InputFilter.ampl2_begin=0.0 InputFilter.ampl2_end=0.0 -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter.band1_error=1.0 InputFilter.band2_error=1.0 -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter.grid_density=16 - -;# Original sampling frequency stored in the signal file InputFilter.sampling_frequency=16368000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter.decimation_factor=3 ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=0 -;#count: Number of available Galileo satellite channels. Channels_1B.count=6 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel0.signal=1B Channel1.signal=1B Channel2.signal=1B @@ -153,130 +90,80 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.use_CFAR_algorithm=false; -;#threshold: Acquisition threshold Acquisition_1C.threshold=22 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 +Acquisition_1B.coherent_integration_time_ms=4 Acquisition_1B.acquire_pilot=true Acquisition_1B.use_CFAR_algorithm=false -;#threshold: Acquisition threshold Acquisition_1B.threshold=22 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 Acquisition_1B.bit_transition_flag=true -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=../data/acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] -Tracking_1C.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. +Tracking_1C.dump=false Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 Tracking_1B.track_pilot=true -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=7.5; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=0.5; -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_narrow_hz=2.5; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_narrow_hz=0.25; Tracking_1B.extend_correlation_symbols=4; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_narrow_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_narrow_chips=0.30; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] -Tracking_1B.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. +Tracking_1B.dump=false Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf index 746dbdea9..2180d8ccb 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_bin_file_III_1a.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -24,27 +26,20 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source SignalSource.flag_read_file=true SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=1 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -52,88 +47,34 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter0.IF=0; -;#-205000 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -142,25 +83,15 @@ DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 1 CONFIG ############ InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -169,28 +100,17 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;# CHANNEL CONNECTION @@ -204,77 +124,46 @@ Channel6.RF_channel_ID=0 Channel7.RF_channel_ID=0 ;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel.signal=1C -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options - ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.use_CFAR_algorithm=false; -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=15 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_C_Aid_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 Tracking_1C.extend_correlation_ms=10 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; Tracking_1C.pll_bw_narrow_hz=35; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; Tracking_1C.dll_bw_narrow_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=true -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -283,22 +172,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT - diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf index dc80ecfd0..e53db62e7 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1a.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,31 +27,18 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source - -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex - -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1a.bit - -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=1 - ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 - -;#frontend channels AGC SignalSource.AGC=true - -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -57,87 +46,34 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter0.IF=-205000 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -146,25 +82,15 @@ DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 1 CONFIG ############ InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -173,37 +99,19 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#signal: -;# "1C" GPS L1 C/A -;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL) -;# "1G" GLONASS L1 C/A -;# "2S" GPS L2 L2C (M) -;# "5X" GALILEO E5a I+Q -;# "L5" GPS L5 ;# CHANNEL CONNECTION Channel0.RF_channel_ID=0 @@ -227,69 +135,39 @@ Channel6.signal=1C Channel7.signal=1C -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options - - ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.012 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=3.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -298,21 +176,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT \ No newline at end of file diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf index 9a184f66d..aa0e26be4 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_III_1b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,13 +27,9 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=1 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 @@ -39,11 +37,9 @@ SignalSource.gain2=0 SignalSource.gain3=0 ;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -51,87 +47,33 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ -InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter0.IF=-205000 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -140,25 +82,15 @@ DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 1 CONFIG ############ InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -167,36 +99,18 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#signal: -;# "1C" GPS L1 C/A -;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL) -;# "1G" GLONASS L1 C/A -;# "2S" GPS L2 L2C (M) -;# "5X" GALILEO E5a I+Q -;# "L5" GPS L5 ;# CHANNEL CONNECTION Channel0.RF_channel_ID=0 @@ -222,63 +136,37 @@ Channel7.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.012 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=3.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -287,21 +175,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT \ No newline at end of file diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf index 34c4e3142..7a7627cef 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_II_3b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,25 +27,18 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_II-3b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=1 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -51,85 +46,34 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz InputFilter0.sampling_frequency=40000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter0.IF=-205000 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=16 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -138,25 +82,15 @@ DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 1 CONFIG ############ InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -165,28 +99,17 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -208,7 +131,6 @@ Channel6.RF_channel_ID=0 Channel7.RF_channel_ID=0 ;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel0.signal=1C Channel1.signal=1C Channel2.signal=1C @@ -219,91 +141,54 @@ Channel6.signal=1C Channel7.signal=1C - ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.012 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=3.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT \ No newline at end of file diff --git a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf index 2bba3f755..3dd9d76cd 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_Flexiband_realtime_I_1b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,25 +27,18 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_I-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=1 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -51,87 +46,34 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter0.sampling_frequency=40000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter0.IF=-205000 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -140,25 +82,15 @@ DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 1 CONFIG ############ InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -167,38 +99,19 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=4 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#signal: -;# "1C" GPS L1 C/A -;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL) -;# "1G" GLONASS L1 C/A -;# "2S" GPS L2 L2C (M) -;# "5X" GALILEO E5a I+Q -;# "L5" GPS L5 - ;# CHANNEL CONNECTION Channel0.RF_channel_ID=0 Channel1.RF_channel_ID=0 @@ -210,7 +123,6 @@ Channel3.RF_channel_ID=0 ;Channel7.RF_channel_ID=0 ;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel0.signal=1C Channel1.signal=1C Channel2.signal=1C @@ -219,63 +131,37 @@ Channel3.signal=1C ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.011 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=3.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -284,20 +170,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf index 48c73a036..1513e6c8b 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_L2_Flexiband_realtime_III_1b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,21 +27,15 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=2 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;###################################################### @@ -47,7 +43,6 @@ SignalSource.usb_packet_buffer=128 ;###################################################### ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -55,85 +50,31 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] -;# WARNING: Fraunhofer front-end hardwareconfigurations can difer. Signals available on http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html are centered on 0 Hz, ALL BANDS. InputFilter0.IF=-205000 -;#InputFilter0.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;###################################################### @@ -141,7 +82,6 @@ Resampler0.implementation=Pass_Through ;###################################################### ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -149,90 +89,35 @@ DataTypeAdapter1.implementation=Pass_Through DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter1.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter_ch1.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter1.band1_begin=0.0 InputFilter1.band1_end=0.45 InputFilter1.band2_begin=0.55 InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter1.ampl1_begin=1.0 InputFilter1.ampl1_end=1.0 InputFilter1.ampl2_begin=0.0 InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter1.band1_error=1.0 InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter1.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter1.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] -;# WARNING: Fraunhofer front-end hardwareconfigurations can difer. Signals available on http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html are centered on 0 Hz, ALL BANDS. InputFilter1.IF=100000 -;#InputFilter1.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter1.decimation_factor=8 ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -241,30 +126,17 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 Channels_2S.count=8 -;#count: Number of available Galileo satellite channels. -;Channels_Galileo.count=0 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -351,40 +223,23 @@ Channel15.RF_channel_ID=1 Channel15.signal=2S -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.008 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=40.0; Tracking_1C.dll_bw_hz=3.0; Tracking_1C.order=3; @@ -396,7 +251,6 @@ Tracking_1C.dump_filename=./tracking_ch_ ;# GPS L2C M Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.threshold=0.0005 ;Acquisition_2S.pfa=0.001 Acquisition_2S.doppler_max=5000 @@ -408,7 +262,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=1.5; Tracking_2S.dll_bw_hz=0.3; Tracking_2S.order=3; @@ -418,22 +271,18 @@ Tracking_2S.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS L1 CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GPS L2 CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L2 M TelemetryDecoder_2S.implementation=GPS_L2C_Telemetry_Decoder TelemetryDecoder_2S.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -442,25 +291,14 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#averaging_depth: Number of PVT observations in the moving average algorithm -PVT.averaging_depth=10 -;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false] PVT.flag_averaging=true -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf index 44be57a15..349b2f2b3 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_L2_Galileo_E1B_Flexiband_bin_file_III_1b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,30 +27,17 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source - SignalSource.flag_read_file=true SignalSource.signal_file=/datalogger/signals/Fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE - -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex - -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit - -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=2 - ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 - -;#frontend channels AGC SignalSource.AGC=true - -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;###################################################### @@ -56,7 +45,6 @@ SignalSource.usb_packet_buffer=128 ;###################################################### ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -64,85 +52,31 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] -;# WARNING: Fraunhofer front-end hardwareconfigurations can difer. Signals available on http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html are centered on 0 Hz, ALL BANDS. -;#InputFilter0.IF=-205000 InputFilter0.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;###################################################### @@ -150,7 +84,6 @@ Resampler0.implementation=Pass_Through ;###################################################### ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -158,90 +91,35 @@ DataTypeAdapter1.implementation=Pass_Through DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter1.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter_ch1.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter1.band1_begin=0.0 InputFilter1.band1_end=0.45 InputFilter1.band2_begin=0.55 InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter1.ampl1_begin=1.0 InputFilter1.ampl1_end=1.0 InputFilter1.ampl2_begin=0.0 InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter1.band1_error=1.0 InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter1.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter1.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] -;# WARNING: Fraunhofer front-end hardware configurations can differ. Signals available at http://www.iis.fraunhofer.de/de/ff/lok/leist/test/flexiband.html are centered on 0 Hz, ALL BANDS. -;#InputFilter1.IF=100000 InputFilter1.IF=0 - -;# Decimation factor after the frequency translating block InputFilter1.decimation_factor=8 ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -250,30 +128,19 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through -;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. +;######### CHANNELS GLOBAL CONFIG ############. Channels_1C.count=2 Channels_1B.count=4 Channels_2S.count=4 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -304,33 +171,17 @@ Channel14.RF_channel_ID=1 Channel15.RF_channel_ID=1 -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples.. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.008 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.0001 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=250 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat @@ -371,70 +222,44 @@ Tracking_2S.dump_filename=../data/epl_tracking_ch_ ;# GALILEO E1B Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000005 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=./veml_tracking_ch_ ;######### TELEMETRY DECODER GPS L1 CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GPS L2 CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L2 M TelemetryDecoder_2S.implementation=GPS_L2C_Telemetry_Decoder TelemetryDecoder_2S.dump=false ;######### TELEMETRY DECODER GALILEO E1B CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -443,22 +268,14 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=100 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf b/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf index c5f32b456..c2216e648 100644 --- a/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf +++ b/conf/gnss-sdr_multichannel_GPS_L1_USRP_X300_realtime.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -27,235 +29,59 @@ GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ ;#implementation SignalSource.implementation=UHD_Signal_Source -;#When left empty, the device discovery routines will search all vailable transports on the system (ethernet, usb...) SignalSource.device_address=192.168.40.2 ; <- PUT THE IP ADDRESS OF YOUR USRP HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource.item_type=gr_complex -;#RF_channels: Number of RF channels present in the frontend device (i.e. USRP with two frontends) SignalSource.RF_channels=2 -;#sampling_frequency: Original Signal sampling frequency in [Hz] SignalSource.sampling_frequency=4000000 -;#subdevice: UHD subdevice specification (for USRP dual frontend use A:0 or B:0 or A:0 B:0) SignalSource.subdevice=A:0 B:0 ;######### RF Channels specific settings ###### - ;## RF CHANNEL 0 ## -;#freq: RF front-end center frequency in [Hz] SignalSource.freq0=1575420000 - -;#gain: Front-end Gain in [dB] SignalSource.gain0=50 - -;#samples: Number of samples to be processed. Notice that 0 indicates no limit SignalSource.samples0=0 - ;## RF CHANNEL 1 ## -;#freq: RF front-end center frequency in [Hz] SignalSource.freq1=1575420000 - -;#gain: Front-end Gain in [dB] SignalSource.gain1=50 - -;#samples: Number of samples to be processed. Notice that 0 indicates no limit SignalSource.samples1=0 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner0.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. - InputFilter0.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter0.band1_begin=0.0 -InputFilter0.band1_end=0.45 -InputFilter0.band2_begin=0.55 -InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter0.ampl1_begin=1.0 -InputFilter0.ampl1_end=1.0 -InputFilter0.ampl2_begin=0.0 -InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter0.band1_error=1.0 -InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter0.grid_density=16 - -;# Original sampling frequency stored in the signal file -InputFilter0.sampling_frequency=20480000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter0.IF=5499998.47412109 - -;# Decimation factor after the frequency tranaslating block -InputFilter0.decimation_factor=8 - ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation Resampler0.implementation=Pass_Through -;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks +;######### SIGNAL_CONDITIONER 1 CONFIG ############ SignalConditioner1.implementation=Pass_Through + ;######### INPUT_FILTER 1 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. - InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter1.band1_begin=0.0 -InputFilter1.band1_end=0.45 -InputFilter1.band2_begin=0.55 -InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter1.ampl1_begin=1.0 -InputFilter1.ampl1_end=1.0 -InputFilter1.ampl2_begin=0.0 -InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter1.band1_error=1.0 -InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter1.grid_density=16 - -;# Original sampling frequency stored in the signal file -InputFilter1.sampling_frequency=20480000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter1.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter1.IF=5499998.47412109 - -;# Decimation factor after the frequency tranaslating block -InputFilter1.decimation_factor=8 - - ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation Resampler1.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=4 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -274,75 +100,45 @@ Channel3.RF_channel_ID=1 ;#signal: -;#if the option is disabled by default is assigned "1C" GPS L1 C/A Channel0.signal=1C Channel1.signal=1C Channel2.signal=1C Channel3.signal=1C -;######### SPECIFIC CHANNELS CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options - ;######### ACQUISITION GLOBAL CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] Acquisition_1C.coherent_integration_time_ms=1 -;#threshold: Acquisition threshold. It will be ignored if pfa is defined. Acquisition_1C.threshold=0.01 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=8000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#bit_transition_flag: Enable or disable a strategy to deal with bit transitions in GPS signals: process two dwells and take -;#maximum test statistics. Only use with implementation: [GPS_L1_CA_PCPS_Acquisition] -;#(should not be used for Galileo_E1_PCPS_Ambiguous_Acquisition]) Acquisition_1C.bit_transition_flag=false -;#max_dwells: Maximum number of consecutive dwells to be processed. It will be ignored if bit_transition_flag=true Acquisition_1C.max_dwells=1 Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### TRACKING GLOBAL CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=40.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=4.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] Tracking_1C.early_late_space_chips=0.5; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=./tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -351,21 +147,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=true PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf b/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf index 2f601ba41..9c899e6ca 100644 --- a/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf +++ b/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,23 +27,17 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source SignalSource.flag_read_file=true SignalSource.signal_file=/media/javier/SISTEMA/signals/fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=1 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;###################################################### @@ -49,7 +45,6 @@ SignalSource.usb_packet_buffer=128 ;###################################################### ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -57,80 +52,31 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter_ch0.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz InputFilter0.sampling_frequency=20000000 InputFilter0.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=4 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;###################################################### @@ -138,7 +84,6 @@ Resampler0.implementation=Pass_Through ;###################################################### ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -146,81 +91,32 @@ DataTypeAdapter1.implementation=Pass_Through DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter1.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter_ch1.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter1.band1_begin=0.0 InputFilter1.band1_end=0.45 InputFilter1.band2_begin=0.55 InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter1.ampl1_begin=1.0 InputFilter1.ampl1_end=1.0 InputFilter1.ampl2_begin=0.0 InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter1.band1_error=1.0 InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter1.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. InputFilter1.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter1.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter1.decimation_factor=4 ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through @@ -229,7 +125,6 @@ Resampler1.implementation=Pass_Through ;###################################################### ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -237,84 +132,41 @@ DataTypeAdapter2.implementation=Pass_Through DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - InputFilter2.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter_ch2.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples.. InputFilter2.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter2.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter2.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter2.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter2.band1_begin=0.0 InputFilter2.band1_end=0.45 InputFilter2.band2_begin=0.55 InputFilter2.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter2.ampl1_begin=1.0 InputFilter2.ampl1_end=1.0 InputFilter2.ampl2_begin=0.0 InputFilter2.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter2.band1_error=1.0 InputFilter2.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter2.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter2.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. InputFilter2.sampling_frequency=40000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter2.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter2.decimation_factor=8 ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=0 Channels_1B.count=10 Channels_2S.count=0 Channels_5X.count=0 -;#GPS.prns=7,8 - -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -369,13 +221,11 @@ Channel37.RF_channel_ID=2 Channel38.RF_channel_ID=2 Channel39.RF_channel_ID=2 -;######### ACQUISITION GENERIC CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options +;######### ACQUISITION CONFIG ###### ;# GPS L1 CA Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.005 Acquisition_1C.doppler_max=5000 @@ -387,30 +237,19 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;# Galileo E1 Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000002 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;# GPS L2C M Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.threshold=0.00074 ;Acquisition_2S.pfa=0.001 Acquisition_2S.doppler_max=5000 @@ -424,7 +263,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat ;# GALILEO E5a Acquisition_5X.implementation=Galileo_E5a_Noncoherent_IQ_Acquisition_CAF Acquisition_5X.item_type=gr_complex -Acquisition_5X.if=0 Acquisition_5X.coherent_integration_time_ms=1 Acquisition_5X.threshold=0.009 Acquisition_5X.doppler_max=5000 @@ -441,7 +279,6 @@ Acquisition_5X.dump_filename=./acq_dump.dat ;######### GPS L1 C/A GENERIC TRACKING CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=40.0; Tracking_1C.dll_bw_hz=3.0; Tracking_1C.order=3; @@ -452,30 +289,19 @@ Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### GALILEO E1 TRK CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### GPS L2C GENERIC TRACKING CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=2.0; Tracking_2S.dll_bw_hz=0.25; Tracking_2S.order=2; @@ -487,7 +313,6 @@ Tracking_2S.dump_filename=./tracking_ch_ ;######### GALILEO E5 TRK CONFIG ############ Tracking_5X.implementation=Galileo_E5a_DLL_PLL_Tracking Tracking_5X.item_type=gr_complex -Tracking_5X.if=0 Tracking_5X.pll_bw_hz_init=20.0; **Only for E5a** PLL loop filter bandwidth during initialization [Hz] Tracking_5X.dll_bw_hz_init=20.0; **Only for E5a** DLL loop filter bandwidth during initialization [Hz] Tracking_5X.ti_ms=1; **Only for E5a** loop filter integration time after initialization (secondary code delay search)[ms] @@ -515,9 +340,7 @@ TelemetryDecoder_5X.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat @@ -526,21 +349,13 @@ PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=100 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b_real.conf b/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b_real.conf index 669f734c3..ab8bbaed6 100644 --- a/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b_real.conf +++ b/conf/gnss-sdr_multichannel_GPS_L2_M_Flexiband_bin_file_III_1b_real.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,23 +27,17 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source SignalSource.flag_read_file=true SignalSource.signal_file=/home/javier/signals/20140923_20-24-17_L125_roof_210s.usb ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=2 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;###################################################### @@ -49,7 +45,6 @@ SignalSource.usb_packet_buffer=128 ;###################################################### ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -57,83 +52,30 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter_ch0.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ -InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter0.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=4 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through ;###################################################### @@ -141,7 +83,6 @@ Resampler0.implementation=Pass_Through ;###################################################### ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ @@ -149,88 +90,35 @@ DataTypeAdapter1.implementation=Pass_Through DataTypeAdapter1.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter1.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter_ch1.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter1.band1_begin=0.0 InputFilter1.band1_end=0.45 InputFilter1.band2_begin=0.55 InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter1.ampl1_begin=1.0 InputFilter1.ampl1_end=1.0 InputFilter1.ampl2_begin=0.0 InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter1.band1_error=1.0 InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter1.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ InputFilter1.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter1.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter1.decimation_factor=4 ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Pass_Through ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -239,32 +127,21 @@ DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ InputFilter2.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex ;######### RESAMPLER CONFIG 2 ############ -;## Resamples the input data. Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=10 Channels_2S.count=4 ;#GPS.prns=7,8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 ;#signal: @@ -301,7 +178,6 @@ Channel19.RF_channel_ID=1 Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.005 Acquisition_1C.doppler_max=5000 @@ -315,7 +191,6 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;# GPS L2C M Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.threshold=0.00074 ;Acquisition_2S.pfa=0.001 Acquisition_2S.doppler_max=5000 @@ -330,7 +205,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat ;######### GPS L1 C/A GENERIC TRACKING CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=40.0; Tracking_1C.dll_bw_hz=3.0; Tracking_1C.order=3; @@ -342,7 +216,6 @@ Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### GPS L2C GENERIC TRACKING CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=2.0; Tracking_2S.dll_bw_hz=0.25; Tracking_2S.order=2; @@ -362,29 +235,22 @@ TelemetryDecoder_2S.dump=false ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=true -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ PVT.implementation=RTKLIB_PVT -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] +PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic +PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX +PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad PVT.output_rate_ms=100 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=100 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT \ No newline at end of file diff --git a/conf/gnss-sdr_multichannel_all_in_one_Flexiband_bin_file_III_1b.conf b/conf/gnss-sdr_multichannel_all_in_one_Flexiband_bin_file_III_1b.conf index dece9c9e4..26fa98a81 100644 --- a/conf/gnss-sdr_multichannel_all_in_one_Flexiband_bin_file_III_1b.conf +++ b/conf/gnss-sdr_multichannel_all_in_one_Flexiband_bin_file_III_1b.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -25,23 +27,17 @@ GNSS-SDR.SUPL_LAC=0x59e2 GNSS-SDR.SUPL_CI=0x31b0 ;######### SIGNAL_SOURCE CONFIG ############ -;#implementation SignalSource.implementation=Flexiband_Signal_Source SignalSource.flag_read_file=true -SignalSource.signal_file=/media/javier/SISTEMA/signals/fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. +SignalSource.signal_file=/media/javier/SISTEMA/signals/fraunhofer/L125_III1b_210s.usb ; <- PUT YOUR FILE HERE SignalSource.item_type=gr_complex -;# FPGA firmware file SignalSource.firmware_file=flexiband_III-1b.bit -;#RF_channels: Number of RF channels present in the frontend device, must agree the FPGA firmware file SignalSource.RF_channels=3 ;#frontend channels gain. Not usable yet! SignalSource.gain1=0 SignalSource.gain2=0 SignalSource.gain3=0 -;#frontend channels AGC SignalSource.AGC=true -;# USB 3.0 packet buffer size (number of SuperSpeed packets) SignalSource.usb_packet_buffer=128 ;###################################################### @@ -49,7 +45,6 @@ SignalSource.usb_packet_buffer=128 ;###################################################### ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ @@ -57,177 +52,69 @@ DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=gr_complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter_ch0.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse reaponse given a set of band edges, -;#the desired reaponse on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ -InputFilter0.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] -;#InputFilter0.IF=-205000 InputFilter0.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=4 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. Resampler0.implementation=Pass_Through + ;###################################################### ;######### RF CHANNEL 1 SIGNAL CONDITIONER ############ ;###################################################### ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ DataTypeAdapter1.implementation=Pass_Through DataTypeAdapter1.item_type=gr_complex -;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - +;######### INPUT_FILTER 1 CONFIG ############ InputFilter1.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter_ch1.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter1.band1_begin=0.0 InputFilter1.band1_end=0.45 InputFilter1.band2_begin=0.55 InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter1.ampl1_begin=1.0 InputFilter1.ampl1_end=1.0 InputFilter1.ampl2_begin=0.0 InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter1.band1_error=1.0 InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter1.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ -InputFilter1.sampling_frequency=20000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter1.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter1.decimation_factor=4 - ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. Resampler1.implementation=Pass_Through @@ -236,7 +123,6 @@ Resampler1.implementation=Pass_Through ;###################################################### ;######### SIGNAL_CONDITIONER 2 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. SignalConditioner2.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 2 CONFIG ############ @@ -244,96 +130,43 @@ DataTypeAdapter2.implementation=Pass_Through DataTypeAdapter2.item_type=gr_complex ;######### INPUT_FILTER 2 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - InputFilter2.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter2.dump=false - -;#dump_filename: Log path and filename. InputFilter2.dump_filename=../data/input_filter_ch2.dat - -;#input_item_type: Type and resolution for input signal samples. InputFilter2.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter2.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter2.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter2.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter2.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter2.band1_begin=0.0 InputFilter2.band1_end=0.45 InputFilter2.band2_begin=0.55 InputFilter2.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter2.ampl1_begin=1.0 InputFilter2.ampl1_end=1.0 InputFilter2.ampl2_begin=0.0 InputFilter2.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter2.band1_error=1.0 InputFilter2.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter2.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter2.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz -;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE -; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/ -InputFilter2.sampling_frequency=40000000 -;# IF deviation due to front-end LO inaccuracies [HZ] InputFilter2.IF=0 - -;# Decimation factor after the frequency tranaslating block InputFilter2.decimation_factor=8 -;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. +;######### RESAMPLER CONFIG 2 ############ Resampler2.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=10 Channels_1B.count=10 Channels_2S.count=10 -Channels_5X.count=10 +Channels_5X.count=2 +Channels_L5.count=2 ;#GPS.prns=7,8 - -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver -Channels.in_acquisition=1 - -;#signal: -;# "1C" GPS L1 C/A -;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL) -;# "1G" GLONASS L1 C/A -;# "2S" GPS L2 L2C (M) -;# "5X" GALILEO E5a I+Q -;# "L5" GPS L5 +;Channels.in_acquisition=2 ;# CHANNEL CONNECTION @@ -377,14 +210,16 @@ Channel36.RF_channel_ID=2 Channel37.RF_channel_ID=2 Channel38.RF_channel_ID=2 Channel39.RF_channel_ID=2 +Channel40.RF_channel_ID=2 +Channel41.RF_channel_ID=2 +Channel42.RF_channel_ID=2 + +;Channel20.satellite=7 -;######### ACQUISITION GENERIC CONFIG ###### -;#The following options are specific to each channel and overwrite the generic options ;# GPS L1 CA Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition Acquisition_1C.item_type=gr_complex -Acquisition_1C.if=0 Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.005 Acquisition_1C.doppler_max=5000 @@ -397,30 +232,18 @@ Acquisition_1C.dump_filename=./acq_dump.dat ;# Galileo E1 Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000002 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=5000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] -Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;# GPS L2C M Acquisition_2S.implementation=GPS_L2_M_PCPS_Acquisition Acquisition_2S.item_type=gr_complex -Acquisition_2S.if=0 Acquisition_2S.threshold=0.00074 ;Acquisition_2S.pfa=0.001 Acquisition_2S.doppler_max=5000 @@ -434,7 +257,6 @@ Acquisition_2S.dump_filename=./acq_dump.dat ;# GALILEO E5a Acquisition_5X.implementation=Galileo_E5a_Noncoherent_IQ_Acquisition_CAF Acquisition_5X.item_type=gr_complex -Acquisition_5X.if=0 Acquisition_5X.coherent_integration_time_ms=1 Acquisition_5X.threshold=0.009 Acquisition_5X.doppler_max=5000 @@ -447,11 +269,23 @@ Acquisition_5X.dump=false Acquisition_5X.dump_filename=./acq_dump.dat +;# GPS L5 +Acquisition_L5.implementation=GPS_L5i_PCPS_Acquisition +Acquisition_L5.item_type=gr_complex +Acquisition_L5.threshold=0.00074 +;Acquisition_L5.pfa=0.001 +Acquisition_L5.doppler_max=5000 +Acquisition_L5.doppler_min=-5000 +Acquisition_L5.doppler_step=125 +Acquisition_L5.max_dwells=1 +Acquisition_L5.dump=false +Acquisition_L5.dump_filename=./acq_dump.dat + + + ;######### TRACKING CONFIG ############ -;######### GPS L1 C/A GENERIC TRACKING CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking Tracking_1C.item_type=gr_complex -Tracking_1C.if=0 Tracking_1C.pll_bw_hz=35.0; Tracking_1C.dll_bw_hz=2.0; Tracking_1C.order=3; @@ -461,30 +295,19 @@ Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### GALILEO E1 TRK CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### GPS L2C GENERIC TRACKING CONFIG ############ Tracking_2S.implementation=GPS_L2_M_DLL_PLL_Tracking Tracking_2S.item_type=gr_complex -Tracking_2S.if=0 Tracking_2S.pll_bw_hz=2.0; Tracking_2S.dll_bw_hz=0.25; Tracking_2S.order=2; @@ -492,21 +315,32 @@ Tracking_2S.early_late_space_chips=0.5; Tracking_2S.dump=false Tracking_2S.dump_filename=./tracking_ch_ - ;######### GALILEO E5 TRK CONFIG ############ Tracking_5X.implementation=Galileo_E5a_DLL_PLL_Tracking Tracking_5X.item_type=gr_complex -Tracking_5X.if=0 -Tracking_5X.pll_bw_hz_init=20.0; **Only for E5a** PLL loop filter bandwidth during initialization [Hz] -Tracking_5X.dll_bw_hz_init=20.0; **Only for E5a** DLL loop filter bandwidth during initialization [Hz] -Tracking_5X.ti_ms=1; **Only for E5a** loop filter integration time after initialization (secondary code delay search)[ms] -Tracking_5X.pll_bw_hz=20.0; -Tracking_5X.dll_bw_hz=20.0; +Tracking_5X.track_pilot=true +Tracking_5X.pll_bw_hz=15.0; +Tracking_5X.dll_bw_hz=2.0; +Tracking_5X.pll_bw_narrow_hz=5.0; +Tracking_5X.dll_bw_narrow_hz=1.0; Tracking_5X.order=2; Tracking_5X.early_late_space_chips=0.5; Tracking_5X.dump=false Tracking_5X.dump_filename=./tracking_ch_ +;######### GALILEO E5 TRK CONFIG ############ +Tracking_L5.implementation=GPS_L5_DLL_PLL_Tracking +Tracking_L5.item_type=gr_complex +Tracking_L5.track_pilot=true +Tracking_L5.pll_bw_hz=15.0; +Tracking_L5.dll_bw_hz=2.0; +Tracking_L5.pll_bw_narrow_hz=4.0; +Tracking_L5.dll_bw_narrow_hz=1.0; +Tracking_L5.order=2; +Tracking_L5.early_late_space_chips=0.5; +Tracking_L5.dump=false +Tracking_L5.dump_filename=./tracking_ch_ + ;######### TELEMETRY DECODER CONFIG ############ TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder @@ -521,37 +355,28 @@ TelemetryDecoder_2S.dump=false TelemetryDecoder_5X.implementation=Galileo_E5a_Telemetry_Decoder TelemetryDecoder_5X.dump=false +TelemetryDecoder_L5.implementation=GPS_L5_Telemetry_Decoder +TelemetryDecoder_L5.dump=false + ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] PVT.output_rate_ms=10 -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=100 -;# KML, GeoJSON, NMEA and RTCM output configuration -;#nmea_dump_filename: NMEA log path and filename PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; -;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one) PVT.flag_nmea_tty_port=false; -;#nmea_dump_devname: serial device descriptor for NMEA logging PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT diff --git a/conf/gnss-sdr_multisource_Hybrid_ishort.conf b/conf/gnss-sdr_multisource_Hybrid_ishort.conf index 3aa7f840b..60f03431b 100644 --- a/conf/gnss-sdr_multisource_Hybrid_ishort.conf +++ b/conf/gnss-sdr_multisource_Hybrid_ishort.conf @@ -1,4 +1,6 @@ -; Default configuration file +; This is a GNSS-SDR configuration file +; The configuration API is described at http://gnss-sdr.org/docs/sp-blocks/ + ; You can define your own receiver and invoke it by doing ; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf ; @@ -11,260 +13,73 @@ GNSS-SDR.internal_fs_sps=4000000 Receiver.sources_count=2 -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false -;#repeat: Repeat the processing file. SignalSource.repeat=false ;######### SIGNAL_SOURCE 0 CONFIG ############ SignalSource0.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource0.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource0.item_type=ishort -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource0.sampling_frequency=4000000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource0.samples=0 ;######### SIGNAL_SOURCE 1 CONFIG ############ SignalSource1.implementation=File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource1.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. SignalSource1.item_type=ishort -;#sampling_frequency: Original Signal sampling frequency in [Hz] SignalSource1.sampling_frequency=4000000 -;#freq: RF front-end center frequency in [Hz] SignalSource1.freq=1575420000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource1.samples=0 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter0.implementation=Ishort_To_Complex ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter0.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of GNU Radio's function: gr_remez. -;;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter0.taps_item_type=float -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter0.band1_begin=0.0 -InputFilter0.band1_end=0.45 -InputFilter0.band2_begin=0.55 -InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter0.ampl1_begin=1.0 -InputFilter0.ampl1_end=1.0 -InputFilter0.ampl2_begin=0.0 -InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter0.band1_error=1.0 -InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter0.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter0.sampling_frequency=4000000 -InputFilter0.IF=0 ;######### RESAMPLER 1 CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neighborhood interpolation - Resampler1.implementation=Pass_Through - -;#dump: Dump the resampled data to a file. Resampler1.dump=false -;#dump_filename: Log path and filename. Resampler1.dump_filename=../data/resampler.dat - -;#item_type: Type and resolution for each of the signal samples. Resampler1.item_type=gr_complex - -;#sample_freq_in: the sample frequency of the input signal Resampler1.sample_freq_in=4000000 - -;#sample_freq_out: the desired sample frequency of the output signal Resampler1.sample_freq_out=4000000 ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter1.implementation=Ishort_To_Complex ;######### INPUT_FILTER 1 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Pass_Through] disables this block -;#[Fir_Filter] enables a FIR Filter -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz. - InputFilter1.implementation=Pass_Through - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false -;#dump_filename: Log path and filename. -InputFilter1.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of GNU Radio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. -InputFilter1.input_item_type=gr_complex - -;#outut_item_type: Type and resolution for output filtered signal samples. -InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. -InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time -InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. -InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - -InputFilter1.band1_begin=0.0 -InputFilter1.band1_end=0.45 -InputFilter1.band2_begin=0.55 -InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - -InputFilter1.ampl1_begin=1.0 -InputFilter1.ampl1_end=1.0 -InputFilter1.ampl2_begin=0.0 -InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands -InputFilter1.band1_error=1.0 -InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" -InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. -InputFilter1.grid_density=16 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter1.IF is the intermediate frequency (in Hz) shifted down to zero Hz - -InputFilter1.sampling_frequency=4000000 -InputFilter1.IF=0 ;######### RESAMPLER 1 CONFIG ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neighborhood interpolation - Resampler1.implementation=Pass_Through - -;#dump: Dump the resampled data to a file. Resampler1.dump=false -;#dump_filename: Log path and filename. -Resampler1.dump_filename=../data/resampler.dat - -;#item_type: Type and resolution for each of the signal samples. +Resampler1.dump_filename=../data/resampler.dat. Resampler1.item_type=gr_complex - -;#sample_freq_in: the sample frequency of the input signal Resampler1.sample_freq_in=4000000 - -;#sample_freq_out: the desired sample frequency of the output signal Resampler1.sample_freq_out=4000000 ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=2 -;#count: Number of available Galileo satellite channels. Channels_1B.count=2 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 @@ -280,120 +95,73 @@ Channel.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.coherent_integration_time_ms=1 Acquisition_1C.threshold=0.0075 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000008 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=45.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=4.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder TelemetryDecoder_1B.dump=false ;######### OBSERVABLES CONFIG ############ -;#implementation: Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ -;#implementation: Position Velocity and Time (PVT) implementation: PVT.implementation=RTKLIB_PVT -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] +PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic PVT.output_rate_ms=100; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. PVT.display_rate_ms=500; PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. PVT.dump_filename=./PVT -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false diff --git a/conf/gnss-sdr_multisource_Hybrid_nsr.conf b/conf/gnss-sdr_multisource_Hybrid_nsr.conf index 5a543018e..8c035713e 100644 --- a/conf/gnss-sdr_multisource_Hybrid_nsr.conf +++ b/conf/gnss-sdr_multisource_Hybrid_nsr.conf @@ -14,250 +14,102 @@ GNSS-SDR.internal_fs_sps=2560000 ;GNSS-SDR.internal_fs_sps=4096000 ;GNSS-SDR.internal_fs_sps=5120000 -;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing. -; it helps to not overload the CPU, but the processing time will be longer. SignalSource.enable_throttle_control=false -;#repeat: Repeat the processing file. SignalSource.repeat=false ;######### SIGNAL_SOURCE 0 CONFIG ############ -;#implementation SignalSource0.implementation=Nsr_File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource0.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource0.item_type=byte -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource0.sampling_frequency=20480000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource0.samples=0 ;######### SIGNAL_SOURCE 1 CONFIG ############ -;#implementation: Use [File_Signal_Source] [Nsr_File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental) SignalSource1.implementation=Nsr_File_Signal_Source -;#filename: path to file with the captured GNSS signal samples to be processed SignalSource1.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream -;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version. SignalSource1.item_type=byte -;#sampling_frequency: Original Signal sampling frequency in samples per second SignalSource1.sampling_frequency=20480000 -;#samples: Number of samples to be processed. Notice that 0 indicates the entire file. SignalSource1.samples=0 ;######### SIGNAL_CONDITIONER 0 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner0.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 0 CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter0.implementation=Pass_Through DataTypeAdapter0.item_type=float ;######### INPUT_FILTER 0 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. - InputFilter0.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter0.dump=false - -;#dump_filename: Log path and filename. InputFilter0.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter0.input_item_type=float - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter0.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter0.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter0.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter0.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter0.band1_begin=0.0 InputFilter0.band1_end=0.45 InputFilter0.band2_begin=0.55 InputFilter0.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter0.ampl1_begin=1.0 InputFilter0.ampl1_end=1.0 InputFilter0.ampl2_begin=0.0 InputFilter0.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter0.band1_error=1.0 InputFilter0.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter0.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter0.grid_density=16 - -;# Original sampling frequency stored in the signal file InputFilter0.sampling_frequency=20480000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter0.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter0.IF=5499998.47412109 - -;# Decimation factor after the frequency tranaslating block InputFilter0.decimation_factor=8 ;######### RESAMPLER CONFIG 0 ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation Resampler0.implementation=Pass_Through ;######### SIGNAL_CONDITIONER 1 CONFIG ############ -;## It holds blocks to change data type, filter and resample input data. - -;#implementation: Use [Pass_Through] or [Signal_Conditioner] -;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks -;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks SignalConditioner1.implementation=Signal_Conditioner ;######### DATA_TYPE_ADAPTER 1 CONFIG ############ -;## Changes the type of input data. -;#implementation: [Pass_Through] disables this block DataTypeAdapter1.implementation=Pass_Through DataTypeAdapter1.item_type=float ;######### INPUT_FILTER 1 CONFIG ############ -;## Filter the input data. Can be combined with frequency translation for IF signals - -;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter] -;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation -;# that shifts IF down to zero Hz. - InputFilter1.implementation=Freq_Xlating_Fir_Filter - -;#dump: Dump the filtered data to a file. InputFilter1.dump=false - -;#dump_filename: Log path and filename. InputFilter1.dump_filename=../data/input_filter.dat - -;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation. -;#These options are based on parameters of gnuradio's function: gr_remez. -;#This function calculates the optimal (in the Chebyshev/minimax sense) FIR filter impulse response given a set of band edges, -;#the desired response on those bands, and the weight given to the error in those bands. - -;#input_item_type: Type and resolution for input signal samples. InputFilter1.input_item_type=float - -;#outut_item_type: Type and resolution for output filtered signal samples. InputFilter1.output_item_type=gr_complex - -;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version. InputFilter1.taps_item_type=float - -;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time InputFilter1.number_of_taps=5 - -;#number_of _bands: Number of frequency bands in the filter. InputFilter1.number_of_bands=2 - -;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...]. -;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2) -;#The number of band_begin and band_end elements must match the number of bands - InputFilter1.band1_begin=0.0 InputFilter1.band1_end=0.45 InputFilter1.band2_begin=0.55 InputFilter1.band2_end=1.0 - -;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...]. -;#The number of ampl_begin and ampl_end elements must match the number of bands - InputFilter1.ampl1_begin=1.0 InputFilter1.ampl1_end=1.0 InputFilter1.ampl2_begin=0.0 InputFilter1.ampl2_end=0.0 - -;#band_error: weighting applied to each band (usually 1). -;#The number of band_error elements must match the number of bands InputFilter1.band1_error=1.0 InputFilter1.band2_error=1.0 - -;#filter_type: one of "bandpass", "hilbert" or "differentiator" InputFilter1.filter_type=bandpass - -;#grid_density: determines how accurately the filter will be constructed. -;The minimum value is 16; higher values are slower to compute the filter. InputFilter1.grid_density=16 - -;# Original sampling frequency stored in the signal file InputFilter1.sampling_frequency=20480000 - -;#The following options are used only in Freq_Xlating_Fir_Filter implementation. -;#InputFilter1.IF is the intermediate frequency (in Hz) shifted down to zero Hz - InputFilter1.IF=5499998.47412109 - -;# Decimation factor after the frequency tranaslating block InputFilter1.decimation_factor=8 ;######### RESAMPLER CONFIG 1 ############ -;## Resamples the input data. - -;#implementation: Use [Pass_Through] or [Direct_Resampler] -;#[Pass_Through] disables this block -;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation Resampler1.implementation=Pass_Through ;######### CHANNELS GLOBAL CONFIG ############ -;#count: Number of available GPS satellite channels. Channels_1C.count=8 -;#count: Number of available Galileo satellite channels. Channels_1B.count=8 -;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver Channels.in_acquisition=1 -;#signal: -;# "1C" GPS L1 C/A -;# "1B" GALILEO E1 B (I/NAV OS/CS/SoL) -;# "1G" GLONASS L1 C/A -;# "2S" GPS L2 L2C (M) -;# "5X" GALILEO E5a I+Q -;# "L5" GPS L5 - ;# SOURCE CONNECTION Channel0.RF_channel_ID=0 Channel1.RF_channel_ID=0 @@ -299,117 +151,77 @@ Channel15.signal=1B ;######### GPS ACQUISITION CONFIG ############ Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1C.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1C.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1C.sampled_ms=1 -;#threshold: Acquisition threshold +Acquisition_1C.scoherent_integration_time_ms=1 Acquisition_1C.threshold=0.0075 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] ;Acquisition_1C.pfa=0.01 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1C.doppler_max=10000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1C.doppler_step=500 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1C.dump=false -;#filename: Log path and filename Acquisition_1C.dump_filename=./acq_dump.dat ;######### GALILEO ACQUISITION CONFIG ############ Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition -;#item_type: Type and resolution for each of the signal samples. Acquisition_1B.item_type=gr_complex -;#if: Signal intermediate frequency in [Hz] -Acquisition_1B.if=0 -;#sampled_ms: Signal block duration for the acquisition signal detection [ms] -Acquisition_1B.sampled_ms=4 -;#threshold: Acquisition threshold +Acquisition_1B.coherent_integration_time_ms=4 ;Acquisition_1B.threshold=0 -;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition] Acquisition_1B.pfa=0.0000002 -;#doppler_max: Maximum expected Doppler shift [Hz] Acquisition_1B.doppler_max=15000 -;#doppler_max: Doppler step in the grid search [Hz] Acquisition_1B.doppler_step=125 -;#dump: Enable or disable the acquisition internal data file logging [true] or [false] Acquisition_1B.dump=false -;#filename: Log path and filename Acquisition_1B.dump_filename=./acq_dump.dat ;######### TRACKING GPS CONFIG ############ Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1C.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1C.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1C.pll_bw_hz=45.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1C.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1C.order=3; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1C.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1C.dump_filename=../data/epl_tracking_ch_ ;######### TRACKING GALILEO CONFIG ############ Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking -;#item_type: Type and resolution for each of the signal samples. Tracking_1B.item_type=gr_complex -;#sampling_frequency: Signal Intermediate Frequency in [Hz] -Tracking_1B.if=0 -;#pll_bw_hz: PLL loop filter bandwidth [Hz] Tracking_1B.pll_bw_hz=15.0; -;#dll_bw_hz: DLL loop filter bandwidth [Hz] Tracking_1B.dll_bw_hz=2.0; -;#order: PLL/DLL loop filter order [2] or [3] Tracking_1B.order=3; -;#early_late_space_chips: correlator early-late space [chips]. Use [0.5] for GPS and [0.15] for Galileo Tracking_1B.early_late_space_chips=0.15; -;#very_early_late_space_chips: only for [Galileo_E1_DLL_PLL_VEML_Tracking], correlator very early-late space [chips]. Use [0.6] Tracking_1B.very_early_late_space_chips=0.6; -;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false] Tracking_1B.dump=false -;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number. Tracking_1B.dump_filename=../data/veml_tracking_ch_ ;######### TELEMETRY DECODER GPS CONFIG ############ -;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder TelemetryDecoder_1C.dump=false ;######### TELEMETRY DECODER GALILEO CONFIG ############ -;#implementation: Use [Galileo_E1B_Telemetry_Decoder] for Galileo E1B TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder ;######### OBSERVABLES CONFIG ############ Observables.implementation=Hybrid_Observables -;#dump: Enable or disable the Observables internal binary data file logging [true] or [false] Observables.dump=false -;#dump_filename: Log path and filename. Observables.dump_filename=./observables.dat ;######### PVT CONFIG ############ PVT.implementation=RTKLIB_PVT -;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms] -PVT.output_rate_ms=10; -;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms. -PVT.display_rate_ms=500; +PVT.positioning_mode=Single ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic +PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX +PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad +PVT.output_rate_ms=100 +PVT.display_rate_ms=500 +PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea; +PVT.flag_nmea_tty_port=true; +PVT.nmea_dump_devname=/dev/pts/4 PVT.flag_rtcm_server=false PVT.flag_rtcm_tty_port=false PVT.rtcm_dump_devname=/dev/pts/1 -;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump. -PVT.dump_filename=./PVT -;#dump: Enable or disable the PVT internal binary data file logging [true] or [false] PVT.dump=false +PVT.dump_filename=./PVT