Please see http://gnss-sdr.org for more information about this open source GNSS software defined receiver.
If you have questions about GNSS-SDR, please subscribe to the gnss-sdr-developers mailing list (requires free subscription at http://lists.sourceforge.net/lists/listinfo/gnss-sdr-developers) and post your questions there.
This section describes how to set up the compilation environment in GNU/Linux or Mac OS X, and to build GNSS-SDR. See also http://gnss-sdr.org/documentation/building-guide
Tested distributions: Ubuntu 12.04, 12.10, 13.04, 13.10 and 14.04 (32 and 64 bits), Debian 6.0.6 and 7.2, Fedora 18, 19 and 20 and openSUSE 13.1 (newer versions should work, too)
- Downloading, building and installing GNU Radio and all its dependencies is not a simple task. We recommend to use PyBOMBS (Python Build Overlay Managed Bundle System), the GNU Radio install management system that automatically does all the work for you. In a terminal, type:
You can safely accept the default options but for prefix. We recommend to put /usr/local there. After the configuration, you should get something similar to:
Then, you are ready to download and install UHD (the Universal Hardware Driver), GNU Radio and all their required dependencies by doing:
$ sudo ./pybombs install uhd gnuradio
This can take some time (up to two hours to complete, depending on your system), and installs the latest versions of the Universal Hardware Driver (UHD) and GNU Radio in your system, including all their dependencies.
In case you do not want to use PyBOMBS and prefer to build and install GNU Radio manually from source, follow instructions at the GNU Radio Building Guide at http://gnuradio.org/redmine/projects/gnuradio/wiki/BuildGuide
The full stop separated from "cmake" by a space is important. CMake will figure out what other libraries are currently installed and will modify Armadillo's configuration correspondingly. CMake will also generate a run-time armadillo library, which is a combined alias for all the relevant libraries present on your system (eg. BLAS, LAPACK and ATLAS).
Please DO NOT install gtest (do not do "sudo make install"). Every user needs to compile his tests using the same compiler flags used to compile the installed Google Test libraries; otherwise he may run into undefined behaviors (i.e. the tests can behave strangely and may even crash for no obvious reasons). The reason is that C++ has this thing called the One-Definition Rule: if two C++ source files contain different definitions of the same class/function/variable, and you link them together, you violate the rule. The linker may or may not catch the error (in many cases it is not required by the C++ standard to catch the violation). If it does not, you get strange run-time behaviors that are unexpected and hard to debug. If you compile Google Test and your test code using different compiler flags, they may see different definitions of the same class/function/variable (e.g. due to the use of #if in Google Test). Therefore, for your sanity, we recommend to avoid installing pre-compiled Google Test libraries. Instead, each project should compile Google Test itself such that it can be sure that the same flags are used for both Google Test and the tests. The building system of GNSS-SDR does the compilation and linking of gtest its own tests; it is only required that you tell the system where the gtest folder that you downloaded resides. Just add to your $HOME/.bashrc file the following line:
changing /home/username/gtest-1.7.0 by the actual directory where you downloaded gtest. Again, it is recommended to add this line to your $HOME/.bashrc file.
If everything goes well, two new executables will be created at gnss-sdr/install, namely gnss-sdr and run_tests.
You can create the documentation by doing:
$ make doc
from the gnss-sdr/build folder. This will generate HTML documentation that can be retrieved pointing your browser of preference to gnss-sdr/docs/html/index.html.
If a LaTeX installation is detected in your system,
$ make pdfmanual
will create a PDF manual at gnss-sdr/docs/GNSS-SDR_manual.pdf. Please note that the PDF generation requires some fonts to be installed on the host system. In Ubuntu 12.10, those fonts do not come by default. You can install them by doing:
$ sudo apt-get install texlive-fonts-recommended
and then run cmake ../ and make pdfmanual again. Finally,
$ make doc-clean
will remove the content of previously-generated documentation.
By default, CMake will build the Release version, meaning that the compiler will generate a faster, optimized executable. This is the recommended build type when using a RF front-end and you need to attain real time. Ifyou are working with a file (and thus without real-time constraints), you may want to obtain more information about the internals of the receiver, as well as more fine-grained logging. This can be done by building the Debug version, by doing:
If you checked out GNSS-SDR some days ago, it is possible that some developer has updated files at the Git repository. You can update your working copy by doing:
2.1. The signal file can be easily recorded using the GNU Radio file sink in gr_complex<float> mode.
2.2. You will need a GPS active antenna and a suitable USRP daughter board to receive GPS L1 C/A signals. GNSS-SDR require to have at least 2 MHz of bandwidth in 1.57542 GHz. (remember to enable the DC bias with the daughter board jumper).
We use the DBSRX to do the task, but you can try the newer ETTUS daughter boards as well.
2.3. The easiest way to capture a signal file is to use the GNU Radio Companion GUI. Only two blocks are needed: an USRP signal source connected to complex float file sink. You need to tune the USRP central frequency and decimation factor using USRP signal source properties box. We suggest using a decimation factor of 20 if you use the USRP2. This will give you 100/20= 5 MSPS which will be enough to receive GPS L1 C/A signals. The front-end gain should also be configured. In our test with the DBSRX we obtained good results with G=50
2.4. Capture at least 80 seconds of signal in open sky conditions. During the process, be aware of USRP driver buffer underuns messages. If your hard disk is not fast enough to write data at this speed you can capture to a virtual RAM drive. 80 seconds of signal at 5 MSPS occupies less than 3 Gbytes using gr_complex<float>.
4. Run the receiver from the install directory. The program reports the current status in text mode, directly to the terminal window. If all goes well, and GNSS-SDR is able to successfully track an decode at least 4 satellites, you will get a PVT fix. The program will write a .kml file and RINEX (yet experimental) files in the install directory. Among the console output, GNSS-SDR also writes log files in /tmp/.
