1
0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-12-13 11:40:33 +00:00
gnss-sdr/conf/gnss-sdr.conf

316 lines
12 KiB
Plaintext
Raw Normal View History

2014-04-26 18:44:58 +00:00
; Default configuration file
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
GNSS-SDR.internal_fs_hz=4000000
;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
2015-07-21 17:14:17 +00:00
; Check http://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
2014-04-26 18:44:58 +00:00
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=true
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=244
GNSS-SDR.SUPL_MNS=5
GNSS-SDR.SUPL_LAC=0x59e2
GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] (experimental)
SignalSource.implementation=File_Signal_Source
;#filename: path to file with the captured GNSS signal samples to be processed
2015-07-21 16:13:06 +00:00
SignalSource.filename=/datalogger/signals/CTTC/2013_04_04_GNSS_SIGNAL_at_CTTC_SPAIN.dat
2014-04-26 18:44:58 +00:00
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=short
2014-04-26 18:44:58 +00:00
;#sampling_frequency: Original Signal sampling frequency in [Hz]
SignalSource.sampling_frequency=4000000
;#freq: RF front-end center frequency in [Hz]
SignalSource.freq=1575420000
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
SignalSource.samples=0
;#repeat: Repeat the processing file. Disable this option in this version
SignalSource.repeat=false
;#dump: Dump the Signal source data to a file. Disable this option in this version
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
;#implementation: Use [Pass_Through] or [Signal_Conditioner]
;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks
;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks
SignalConditioner.implementation=Signal_Conditioner
;SignalConditioner.implementation=Pass_Through
2014-04-26 18:44:58 +00:00
;######### DATA_TYPE_ADAPTER CONFIG ############
;## Changes the type of input data. Please disable it in this version.
;#implementation: [Pass_Through] disables this block
DataTypeAdapter.implementation=Ishort_To_Complex
;DataTypeAdapter.implementation=Ibyte_To_Cbyte
;DataTypeAdapter.implementation=Pass_Through
;DataTypeAdapter.item_type=byte
2014-04-26 18:44:58 +00:00
;######### INPUT_FILTER CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
;InputFilter.implementation=Fir_Filter
;InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.implementation=Pass_Through
2014-04-26 18:44:58 +00:00
;#dump: Dump the filtered data to a file.
InputFilter.dump=false
;#dump_filename: Log path and filename.
InputFilter.dump_filename=../data/input_filter.dat
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
;#These options are based on parameters of gnuradio's function: gr_remez.
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges, the desired reponse on those bands, and the weight given to the error in those bands.
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
InputFilter.input_item_type=gr_complex
2014-04-26 18:44:58 +00:00
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
InputFilter.output_item_type=gr_complex
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
InputFilter.taps_item_type=float
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
InputFilter.number_of_taps=5
;#number_of _bands: Number of frequency bands in the filter.
InputFilter.number_of_bands=2
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
;#The number of band_begin and band_end elements must match the number of bands
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.44
2014-04-26 18:44:58 +00:00
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
;#The number of ampl_begin and ampl_end elements must match the number of bands
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
;#band_error: weighting applied to each band (usually 1).
;#The number of band_error elements must match the number of bands
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
InputFilter.filter_type=bandpass
;#grid_density: determines how accurately the filter will be constructed.
;The minimum value is 16; higher values are slower to compute the filter.
InputFilter.grid_density=16
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz
InputFilter.sampling_frequency=4000000
InputFilter.IF=0
;######### RESAMPLER CONFIG ############
;## Resamples the input data.
;#implementation: Use [Pass_Through] or [Direct_Resampler]
;#[Pass_Through] disables this block
;#[Direct_Resampler] enables a resampler that implements a nearest neigbourhood interpolation
;Resampler.implementation=Direct_Resampler
Resampler.implementation=Pass_Through
2014-04-26 18:44:58 +00:00
;#dump: Dump the resamplered data to a file.
Resampler.dump=false
;#dump_filename: Log path and filename.
Resampler.dump_filename=../data/resampler.dat
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
Resampler.item_type=gr_complex
;Resampler.item_type=cbyte
2014-04-26 18:44:58 +00:00
;#sample_freq_in: the sample frequency of the input signal
Resampler.sample_freq_in=4000000
2014-04-26 18:44:58 +00:00
;#sample_freq_out: the desired sample frequency of the output signal
Resampler.sample_freq_out=2000000
2014-04-26 18:44:58 +00:00
;######### CHANNELS GLOBAL CONFIG ############
2015-07-21 16:13:06 +00:00
;#count: Number of available GPS L1 C/A satellite channels.
Channels_1C.count=6
;#count: Number of available Galileo E1B satellite channels.
Channels_1B.count=0
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
2014-04-26 18:44:58 +00:00
Channels.in_acquisition=1
2015-07-21 16:13:06 +00:00
2014-04-26 18:44:58 +00:00
;#if the option is disabled by default is assigned "1C" GPS L1 C/A
Channel.signal=1C
2014-04-26 18:44:58 +00:00
;######### SPECIFIC CHANNELS CONFIG ######
;#The following options are specific to each channel and overwrite the generic options
;######### CHANNEL 0 CONFIG ############
;Channel0.signal=1C
2014-04-26 18:44:58 +00:00
;#satellite: Satellite PRN ID for this channel. Disable this option to random search
;Channel0.satellite=11
2014-04-26 18:44:58 +00:00
;######### CHANNEL 1 CONFIG ############
;Channel1.signal=1C
;Channel1.satellite=18
2014-04-26 18:44:58 +00:00
;######### ACQUISITION GLOBAL CONFIG ############
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
2015-07-21 16:13:06 +00:00
Acquisition_1C.dump=false
2014-04-26 18:44:58 +00:00
;#filename: Log path and filename
2015-07-21 16:13:06 +00:00
Acquisition_1C.dump_filename=./acq_dump.dat
2014-04-26 18:44:58 +00:00
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
2015-07-21 16:13:06 +00:00
Acquisition_1C.item_type=gr_complex
;#if: Signal intermediate frequency in [Hz]
2015-07-21 16:13:06 +00:00
Acquisition_1C.if=0
2014-04-26 18:44:58 +00:00
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
2015-07-21 16:13:06 +00:00
Acquisition_1C.sampled_ms=1
2014-04-26 18:44:58 +00:00
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
2015-07-21 16:13:06 +00:00
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
;#threshold: Acquisition threshold
2015-07-21 16:13:06 +00:00
Acquisition_1C.threshold=0.005
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
2015-07-21 16:13:06 +00:00
;Acquisition_1C.pfa=0.0001
2014-04-26 18:44:58 +00:00
;#doppler_max: Maximum expected Doppler shift [Hz]
2015-07-21 16:13:06 +00:00
Acquisition_1C.doppler_max=10000
;#doppler_max: Maximum expected Doppler shift [Hz]
2015-07-21 16:13:06 +00:00
Acquisition_1C.doppler_min=-10000
;#doppler_step Doppler step in the grid search [Hz]
2015-07-21 16:13:06 +00:00
Acquisition_1C.doppler_step=500
;#maximum dwells
2015-07-21 16:13:06 +00:00
Acquisition_1C.max_dwells=5
2014-04-26 18:44:58 +00:00
;######### TRACKING GLOBAL CONFIG ############
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_FLL_PLL_Tracking] or [GPS_L1_CA_TCP_CONNECTOR_Tracking] or [Galileo_E1_DLL_PLL_VEML_Tracking]
2015-07-21 16:13:06 +00:00
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
2014-04-26 18:44:58 +00:00
;#item_type: Type and resolution for each of the signal samples. Use only [gr_complex] in this version.
2015-07-21 16:13:06 +00:00
Tracking_1C.item_type=gr_complex
2014-04-26 18:44:58 +00:00
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
2015-07-21 16:13:06 +00:00
Tracking_1C.if=0
2014-04-26 18:44:58 +00:00
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
2015-07-21 16:13:06 +00:00
Tracking_1C.dump=false
2014-04-26 18:44:58 +00:00
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
2015-07-21 16:13:06 +00:00
Tracking_1C.dump_filename=../data/epl_tracking_ch_
2014-04-26 18:44:58 +00:00
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
2015-07-21 16:13:06 +00:00
Tracking_1C.pll_bw_hz=45.0;
2014-04-26 18:44:58 +00:00
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
2015-07-21 16:13:06 +00:00
Tracking_1C.dll_bw_hz=3.0;
2014-04-26 18:44:58 +00:00
;#fll_bw_hz: FLL loop filter bandwidth [Hz]
2015-07-21 16:13:06 +00:00
Tracking_1C.fll_bw_hz=10.0;
2014-04-26 18:44:58 +00:00
;#order: PLL/DLL loop filter order [2] or [3]
2015-07-21 16:13:06 +00:00
Tracking_1C.order=3;
2014-04-26 18:44:58 +00:00
;######### TELEMETRY DECODER GPS CONFIG ############
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
2015-07-21 16:13:06 +00:00
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
;#decimation factor
2015-07-21 16:13:06 +00:00
TelemetryDecoder_1C.decimation_factor=1;
2014-04-26 18:44:58 +00:00
;######### OBSERVABLES CONFIG ############
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
Observables.implementation=GPS_L1_CA_Observables
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
Observables.dump=false
;#dump_filename: Log path and filename.
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
PVT.implementation=GPS_L1_CA_PVT
;#averaging_depth: Number of PVT observations in the moving average algorithm
PVT.averaging_depth=100
2014-04-26 18:44:58 +00:00
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
PVT.flag_averaging=true
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
PVT.output_rate_ms=10
2014-04-26 18:44:58 +00:00
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
PVT.display_rate_ms=500
;# KML, GeoJSON and NMEA output configuration
2014-04-26 18:44:58 +00:00
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump, ".kml" and ".geojson" to GIS-friendly formats.
2014-04-26 18:44:58 +00:00
PVT.dump_filename=./PVT
;#nmea_dump_filename: NMEA log path and filename
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
PVT.flag_nmea_tty_port=true;
;#nmea_dump_devname: serial device descriptor for NMEA logging
PVT.nmea_dump_devname=/dev/pts/4
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
PVT.dump=false
;######### OUTPUT_FILTER CONFIG ############
;# Receiver output filter: Leave this block disabled in this version
OutputFilter.implementation=Null_Sink_Output_Filter
OutputFilter.filename=data/gnss-sdr.dat
OutputFilter.item_type=gr_complex