gnss-sdr/conf/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf

; Configuration file for using USRP X300 as a RF front-end for Galileo E1 signals.
; Set SignalSource.device_address to the IP address of your device
; and run:
; gnss-sdr --config_file=/path/to/gnss-sdr_Galileo_E1_USRP_X300_realtime.conf
;

[GNSS-SDR]

;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=4000000


;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=UHD_Signal_Source
SignalSource.item_type=gr_complex
SignalSource.device_address=192.168.40.2  ; <- PUT THE IP ADDRESS OF YOUR USRP HERE
SignalSource.sampling_frequency=4000000
SignalSource.freq=1575420000
SignalSource.gain=50
SignalSource.subdevice=A:0
SignalSource.samples=0
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
SignalSource.enable_throttle_control=false


;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Pass_Through


;######### CHANNELS GLOBAL CONFIG ######
Channels_1B.count=4
Channels.in_acquisition=1
Channel.signal=1B


;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1B.implementation=Galileo_E1_PCPS_Ambiguous_Acquisition
Acquisition_1B.item_type=gr_complex
Acquisition_1B.if=0
Acquisition_1B.sampled_ms=4
;Acquisition_1B.threshold=1
Acquisition_1B.pfa=0.000008
Acquisition_1B.doppler_max=6000
Acquisition_1B.doppler_step=250
Acquisition_1B.cboc=false
Acquisition_1B.dump=false
Acquisition_1B.dump_filename=./acq_dump.dat


;######### TRACKING GLOBAL CONFIG ############
Tracking_1B.implementation=Galileo_E1_DLL_PLL_VEML_Tracking
Tracking_1B.item_type=gr_complex
Tracking_1B.if=0
Tracking_1B.pll_bw_hz=20.0;
Tracking_1B.dll_bw_hz=2.0;
Tracking_1B.order=3;
Tracking_1B.early_late_space_chips=0.15;
Tracking_1B.very_early_late_space_chips=0.6;
Tracking_1B.dump=false
Tracking_1B.dump_filename=../data/veml_tracking_ch_


;######### TELEMETRY DECODER CONFIG ############
TelemetryDecoder_1B.implementation=Galileo_E1B_Telemetry_Decoder
TelemetryDecoder_1B.dump=false


;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat


;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=PPP_Static  ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100;
PVT.display_rate_ms=500;
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea
PVT.flag_nmea_tty_port=true
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=true
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
PVT.dump=false
PVT.dump_filename=./PVT