mirrors/gnss-sdr
1
0
Fork 0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-11-05 01:26:24 +00:00
Code Issues Releases Wiki Activity
2dcdb912f4
gnss-sdr/conf/gnss-sdr_GPS_L1_nsr_twobit_packed.conf

153 lines
5.1 KiB
Plaintext
Raw Normal View History

Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
; Sample configuration file for IFEN SX-NSR software receiver front-end
; http://www.ifen.com/products/sx-scientific-gnss-solutions/nsr-software-receiver.html
; This sample configuration is able to process directly .sream binary files
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
The global parameter name GNSS-SDR.internal_fs_hz has been replaced by GNSS-SDR.internal_fs_sps The old name was misleading, since the units are samples per second and not Hertz. Backward compatibility is kept, so this change does not break any existing configuration.
2017-09-02 09:24:44 +00:00
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=2560000
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
;######### SUPL RRLP GPS assistance configuration #####
Clean configuration files Added information on how to retrieve SUPL parameters, and indicators to userd on where to point to their own file or IP address. Removed unused parameter wait_for_flowgraph.
2016-05-15 12:27:51 +00:00
; Check http://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
Server supl.nokia.com is not working anymore Replaced by supl.google.com
2016-05-07 08:00:49 +00:00
GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=244
GNSS-SDR.SUPL_MNS=5
GNSS-SDR.SUPL_LAC=0x59e2
GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Two_Bit_Packed_File_Signal_Source
Clean configuration files Added information on how to retrieve SUPL parameters, and indicators to userd on where to point to their own file or IP address. Removed unused parameter wait_for_flowgraph.
2016-05-15 12:27:51 +00:00
SignalSource.filename=/datalogger/signals/ifen/E1L1_FE0_Band0.stream ; <- PUT YOUR FILE HERE
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
SignalSource.item_type=byte
; big_endian_items : not needed for byte inputs
; If the input were 'short' then this can either be big endian or little
; endian. If it is big endian then the second byte should be output
; first in each short.
; SignalSource.big_endian_items=false
; big_endian_bytes: true if the most signficiant two bits in the byte
; are the first two to be output.
SignalSource.big_endian_bytes=false
; sample_type: one of 'real' 'iq' or 'qi'
; Data is either real or complex.
; if the data is complex there are two conventions for sample ordering:
; 1) Real first : 'iq'
; 2) Imaginary first: 'qi'
; This setting specifies which of the three cases holds for this data file
SignalSource.sample_type=real
SignalSource.sampling_frequency=20480000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
SignalSource.enable_throttle_control=false
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER CONFIG ############
DataTypeAdapter.implementation=Pass_Through
DataTypeAdapter.item_type=float
;######### INPUT_FILTER CONFIG ############
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.dump=false
InputFilter.dump_filename=../data/input_filter.dat
InputFilter.input_item_type=float
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.45
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=20480000
InputFilter.IF=5499998.47412109
InputFilter.decimation_factor=8
;######### RESAMPLER CONFIG ############
Resampler.implementation=Pass_Through
Resampler.dump=false
Resampler.dump_filename=../data/resampler.dat
Resampler.item_type=gr_complex
;######### CHANNELS GLOBAL CONFIG ############
;#count: Number of available GPS satellite channels.
Channels_1C.count=8
Channels.in_acquisition=1
Channel.signal=1C
;######### GPS ACQUISITION CONFIG ############
Clean configuration files
2018-01-29 22:30:50 +00:00
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
Acquisition_1C.item_type=gr_complex
Acquisition_1C.if=0
Acquisition_1C.sampled_ms=1
Acquisition_1C.threshold=0.0075
;Acquisition_1C.pfa=0.01
Acquisition_1C.doppler_max=10000
Acquisition_1C.doppler_step=500
Clean configuration files
2018-01-29 22:30:50 +00:00
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=./acq_dump.dat
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
;######### TRACKING GPS CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.if=0
Tracking_1C.pll_bw_hz=45.0;
Tracking_1C.dll_bw_hz=2.0;
Tracking_1C.order=3;
Clean configuration files
2018-01-29 22:30:50 +00:00
Tracking_1C.dump=false
Tracking_1C.dump_filename=../data/epl_tracking_ch_
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
Clean configuration files
2018-01-29 22:30:50 +00:00
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
;######### OBSERVABLES CONFIG ############
Consolidation of all the observables and PVT algorithms in hybrid observables and hybrid PVT supporting multi-signals and multi-system operations
2017-03-24 14:25:17 +00:00
Observables.implementation=Hybrid_Observables
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
Observables.dump=false
Observables.dump_filename=./observables.dat
Clean configuration files
2018-01-29 22:30:50 +00:00
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
;######### PVT CONFIG ############
Update conf files to new implementation for PVT
2017-05-08 19:12:32 +00:00
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=PPP_Static ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=Broadcast ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=Saastamoinen ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
PVT.output_rate_ms=10
PVT.display_rate_ms=500
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
PVT.flag_nmea_tty_port=false;
PVT.nmea_dump_devname=/dev/pts/4
Integrating the RTCM printer Now the Galileo E1 receiver generates RTCM messages 1045 (ephemeris) and MSM7 / 1097 (observables). Parameters related to RTCM included in conf files. The TCP/IP server can be activated by setting flag_rtcm_server to true.
2015-12-25 09:25:22 +00:00
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
Added NSR conf file as e.g. use of two bit packed file sample source. NOTE: This has not been tested with a real NSR front end. The assumption is, based on reading the NSRFileSignalSource, that the data is: o byte item type o real o bytes are little endian (least significant bits output first)
2015-10-14 08:53:47 +00:00
PVT.dump=true
Reference in New Issue Copy Permalink