1
0
mirror of https://github.com/gnss-sdr/gnss-sdr synced 2024-12-15 12:40:35 +00:00
gnss-sdr/conf/gnss-sdr_GPS_L1_rtl_tcp_realtime.conf

293 lines
12 KiB
Plaintext
Raw Normal View History

2015-04-30 13:36:47 +00:00
; Default configuration file
; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;
[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
;internal_fs_hz: Internal signal sampling frequency after the signal conditioning stage [Hz].
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
2015-05-08 06:59:38 +00:00
GNSS-SDR.internal_fs_hz=1200000
2015-04-30 13:36:47 +00:00
;######### CONTROL_THREAD CONFIG ############
ControlThread.wait_for_flowgraph=false
;######### SUPL RRLP GPS assistance configuration #####
GNSS-SDR.SUPL_gps_enabled=false
GNSS-SDR.SUPL_read_gps_assistance_xml=false
GNSS-SDR.SUPL_gps_ephemeris_server=supl.nokia.com
GNSS-SDR.SUPL_gps_ephemeris_port=7275
GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
GNSS-SDR.SUPL_gps_acquisition_port=7275
GNSS-SDR.SUPL_MCC=244
2015-07-21 16:03:26 +00:00
GNSS-SDR.SUPL_MNS=5_1C
2015-04-30 13:36:47 +00:00
GNSS-SDR.SUPL_LAC=0x59e2
GNSS-SDR.SUPL_CI=0x31b0
;######### SIGNAL_SOURCE CONFIG ############
;#implementation: Use [File_Signal_Source] or [UHD_Signal_Source] or [GN3S_Signal_Source] [Osmosdr_Signal_Source]
2015-05-08 06:59:38 +00:00
SignalSource.implementation=RtlTcp_Signal_Source
2015-04-30 13:36:47 +00:00
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
SignalSource.item_type=gr_complex
;#sampling_frequency: Original Signal sampling frequency in [Hz]
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
2015-05-08 06:59:38 +00:00
SignalSource.sampling_frequency=1200000
2015-04-30 13:36:47 +00:00
;#freq: RF front-end center frequency in [Hz]
SignalSource.freq=1575420000
;#gain: Front-end overall gain Gain in [dB]
SignalSource.gain=40
;#rf_gain: Front-end RF stage gain in [dB]
SignalSource.rf_gain=40
;#rf_gain: Front-end IF stage gain in [dB]
SignalSource.if_gain=30
;#AGC_enabled: Front-end AGC enabled or disabled
SignalSource.AGC_enabled = false
;#samples: Number of samples to be processed. Notice that 0 indicates the entire file.
SignalSource.samples=0
;#repeat: Repeat the processing file. Disable this option in this version
SignalSource.repeat=false
;#dump: Dump the Signal source data to a file. Disable this option in this version
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
;#enable_throttle_control: Enabling this option tells the signal source to keep the delay between samples in post processing.
; it helps to not overload the CPU, but the processing time will be longer.
SignalSource.enable_throttle_control=false
2015-05-10 12:57:43 +00:00
;#Address of the rtl_tcp server (IPv6 allowed)
2015-05-08 06:59:38 +00:00
SignalSource.address=127.0.0.1
;#Port of the rtl_tcp server
SignalSource.port=1234
2015-04-30 13:36:47 +00:00
2015-05-10 12:57:43 +00:00
;# Set to true if I/Q samples come swapped
SignalSource.swap_iq=false
2015-04-30 13:36:47 +00:00
;######### SIGNAL_CONDITIONER CONFIG ############
;## It holds blocks to change data type, filter and resample input data.
;#implementation: Use [Pass_Through] or [Signal_Conditioner]
;#[Pass_Through] disables this block and the [DataTypeAdapter], [InputFilter] and [Resampler] blocks
;#[Signal_Conditioner] enables this block. Then you have to configure [DataTypeAdapter], [InputFilter] and [Resampler] blocks
SignalConditioner.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER CONFIG ############
;## Changes the type of input data. Please disable it in this version.
;#implementation: [Pass_Through] disables this block
DataTypeAdapter.implementation=Pass_Through
;######### INPUT_FILTER CONFIG ############
;## Filter the input data. Can be combined with frequency translation for IF signals
;#implementation: Use [Pass_Through] or [Fir_Filter] or [Freq_Xlating_Fir_Filter]
;#[Pass_Through] disables this block
;#[Fir_Filter] enables a FIR Filter
;#[Freq_Xlating_Fir_Filter] enables FIR filter and a composite frequency translation that shifts IF down to zero Hz.
InputFilter.implementation=Freq_Xlating_Fir_Filter
;#dump: Dump the filtered data to a file.
InputFilter.dump=false
;#dump_filename: Log path and filename.
InputFilter.dump_filename=../data/input_filter.dat
;#The following options are used in the filter design of Fir_Filter and Freq_Xlating_Fir_Filter implementation.
;#These options are based on parameters of gnuradio's function: gr_remez.
;#These function calculates the optimal (in the Chebyshev/minimax sense) FIR filter inpulse reponse given a set of band edges, the desired reponse on those bands, and the weight given to the error in those bands.
;#input_item_type: Type and resolution for input signal samples. Use only gr_complex in this version.
InputFilter.input_item_type=gr_complex
;#outut_item_type: Type and resolution for output filtered signal samples. Use only gr_complex in this version.
InputFilter.output_item_type=gr_complex
;#taps_item_type: Type and resolution for the taps of the filter. Use only float in this version.
InputFilter.taps_item_type=float
;#number_of_taps: Number of taps in the filter. Increasing this parameter increases the processing time
InputFilter.number_of_taps=5
;#number_of _bands: Number of frequency bands in the filter.
InputFilter.number_of_bands=2
;#bands: frequency at the band edges [ b1 e1 b2 e2 b3 e3 ...].
;#Frequency is in the range [0, 1], with 1 being the Nyquist frequency (Fs/2)
;#The number of band_begin and band_end elements must match the number of bands
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.45
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
;#ampl: desired amplitude at the band edges [ a(b1) a(e1) a(b2) a(e2) ...].
;#The number of ampl_begin and ampl_end elements must match the number of bands
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
;#band_error: weighting applied to each band (usually 1).
;#The number of band_error elements must match the number of bands
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
;#filter_type: one of "bandpass", "hilbert" or "differentiator"
InputFilter.filter_type=bandpass
;#grid_density: determines how accurately the filter will be constructed.
;The minimum value is 16; higher values are slower to compute the filter.
InputFilter.grid_density=16
;#The following options are used only in Freq_Xlating_Fir_Filter implementation.
;#InputFilter.IF is the intermediate frequency (in Hz) shifted down to zero Hz
;FOR USE GNSS-SDR WITH RTLSDR DONGLES USER MUST SET THE CALIBRATED SAMPLE RATE HERE
; i.e. using front-end-cal as reported here:http://www.cttc.es/publication/turning-a-television-into-a-gnss-receiver/
2015-05-08 06:59:38 +00:00
InputFilter.sampling_frequency=1200000
2015-04-30 13:36:47 +00:00
;# IF deviation due to front-end LO inaccuracies [HZ]
InputFilter.IF=80558
;######### RESAMPLER CONFIG ############
;## Resamples the input data.
;# DISABLED IN THE RTL-SDR REALTIME
;#implementation: Use [Pass_Through] or [Direct_Resampler]
;#[Pass_Through] disables this block
Resampler.implementation=Pass_Through
;######### CHANNELS GLOBAL CONFIG ############
;#count: Number of available GPS satellite channels.
2015-07-21 16:03:26 +00:00
Channels_1C.count=4
2015-04-30 13:36:47 +00:00
;#in_acquisition: Number of channels simultaneously acquiring for the whole receiver
Channels.in_acquisition=1
Channel.signal=1C
2015-07-21 16:03:26 +00:00
2015-04-30 13:36:47 +00:00
;######### ACQUISITION GLOBAL CONFIG ############
;#dump: Enable or disable the acquisition internal data file logging [true] or [false]
2015-07-21 16:03:26 +00:00
Acquisition_1C.dump=false
2015-04-30 13:36:47 +00:00
;#filename: Log path and filename
2015-07-21 16:03:26 +00:00
Acquisition_1C.dump_filename=./acq_dump.dat
2015-04-30 13:36:47 +00:00
;#item_type: Type and resolution for each of the signal samples. Use only gr_complex in this version.
2015-07-21 16:03:26 +00:00
Acquisition_1C.item_type=gr_complex
2015-04-30 13:36:47 +00:00
;#if: Signal intermediate frequency in [Hz]
2015-07-21 16:03:26 +00:00
Acquisition_1C.if=0
2015-04-30 13:36:47 +00:00
;#sampled_ms: Signal block duration for the acquisition signal detection [ms]
2015-07-21 16:03:26 +00:00
Acquisition_1C.sampled_ms=1
2015-04-30 13:36:47 +00:00
;#implementation: Acquisition algorithm selection for this channel: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
2015-07-21 16:03:26 +00:00
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition_Fine_Doppler
2015-04-30 13:36:47 +00:00
;#threshold: Acquisition threshold
2015-07-21 16:03:26 +00:00
Acquisition_1C.threshold=0.015
2015-04-30 13:36:47 +00:00
;#pfa: Acquisition false alarm probability. This option overrides the threshold option. Only use with implementations: [GPS_L1_CA_PCPS_Acquisition] or [Galileo_E1_PCPS_Ambiguous_Acquisition]
2015-07-21 16:03:26 +00:00
;Acquisition_1C.pfa=0.0001
2015-04-30 13:36:47 +00:00
;#doppler_max: Maximum expected Doppler shift [Hz]
2015-07-21 16:03:26 +00:00
Acquisition_1C.doppler_max=10000
2015-04-30 13:36:47 +00:00
;#doppler_max: Maximum expected Doppler shift [Hz]
2015-07-21 16:03:26 +00:00
Acquisition_1C.doppler_min=-10000
2015-04-30 13:36:47 +00:00
;#doppler_step Doppler step in the grid search [Hz]
2015-07-21 16:03:26 +00:00
Acquisition_1C.doppler_step=500
2015-04-30 13:36:47 +00:00
;#maximum dwells
2015-07-21 16:03:26 +00:00
Acquisition_1C.max_dwells=15
2015-04-30 13:36:47 +00:00
;######### TRACKING GLOBAL CONFIG ############
2016-04-08 16:19:42 +00:00
;#implementation: Selected tracking algorithm: [GPS_L1_CA_DLL_PLL_Tracking] or [GPS_L1_CA_DLL_PLL_C_Aid_Tracking] [GPS_L1_CA_DLL_PLL_Optim_Tracking]
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
2016-04-08 16:19:42 +00:00
;#item_type: Type and resolution for each of the signal samples.
2015-07-21 16:03:26 +00:00
Tracking_1C.item_type=gr_complex
2015-04-30 13:36:47 +00:00
;#sampling_frequency: Signal Intermediate Frequency in [Hz]
2015-07-21 16:03:26 +00:00
Tracking_1C.if=0
2015-04-30 13:36:47 +00:00
;#dump: Enable or disable the Tracking internal binary data file logging [true] or [false]
2015-07-21 16:03:26 +00:00
Tracking_1C.dump=false
2015-04-30 13:36:47 +00:00
;#dump_filename: Log path and filename. Notice that the tracking channel will add "x.dat" where x is the channel number.
2015-07-21 16:03:26 +00:00
Tracking_1C.dump_filename=./tracking_ch_
2015-04-30 13:36:47 +00:00
;#pll_bw_hz: PLL loop filter bandwidth [Hz]
2015-07-21 16:03:26 +00:00
Tracking_1C.pll_bw_hz=40.0;
2015-04-30 13:36:47 +00:00
;#dll_bw_hz: DLL loop filter bandwidth [Hz]
2015-07-21 16:03:26 +00:00
Tracking_1C.dll_bw_hz=2.0;
2015-04-30 13:36:47 +00:00
;#order: PLL/DLL loop filter order [2] or [3]
2015-07-21 16:03:26 +00:00
Tracking_1C.order=3;
2015-04-30 13:36:47 +00:00
;#early_late_space_chips: correlator early-late space [chips]. Use [0.5]
2015-07-21 16:03:26 +00:00
Tracking_1C.early_late_space_chips=0.5;
2015-04-30 13:36:47 +00:00
;######### TELEMETRY DECODER GPS CONFIG ############
;#implementation: Use [GPS_L1_CA_Telemetry_Decoder] for GPS L1 C/A
2015-07-21 16:03:26 +00:00
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
2015-04-30 13:36:47 +00:00
;#decimation factor
2015-07-21 16:03:26 +00:00
TelemetryDecoder_1C.decimation_factor=1;
2015-04-30 13:36:47 +00:00
;######### OBSERVABLES CONFIG ############
;#implementation: Use [GPS_L1_CA_Observables] for GPS L1 C/A.
Observables.implementation=GPS_L1_CA_Observables
;#dump: Enable or disable the Observables internal binary data file logging [true] or [false]
Observables.dump=false
;#dump_filename: Log path and filename.
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
;#implementation: Position Velocity and Time (PVT) implementation algorithm: Use [GPS_L1_CA_PVT] in this version.
PVT.implementation=GPS_L1_CA_PVT
;#averaging_depth: Number of PVT observations in the moving average algorithm
PVT.averaging_depth=10
;#flag_average: Enables the PVT averaging between output intervals (arithmetic mean) [true] or [false]
PVT.flag_averaging=true
;#output_rate_ms: Period between two PVT outputs. Notice that the minimum period is equal to the tracking integration time (for GPS CA L1 is 1ms) [ms]
PVT.output_rate_ms=100
;#display_rate_ms: Position console print (std::out) interval [ms]. Notice that output_rate_ms<=display_rate_ms.
PVT.display_rate_ms=500
;# KML, GeoJSON, NMEA and RTCM output configuration
2015-04-30 13:36:47 +00:00
;#dump_filename: Log path and filename without extension. Notice that PVT will add ".dat" to the binary dump and ".kml" to GoogleEarth dump.
PVT.dump_filename=./PVT
;#nmea_dump_filename: NMEA log path and filename
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea;
;#flag_nmea_tty_port: Enable or disable the NMEA log to a serial TTY port (Can be used with real hardware or virtual one)
PVT.flag_nmea_tty_port=false;
;#nmea_dump_devname: serial device descriptor for NMEA logging
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=false
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1
2015-04-30 13:36:47 +00:00
;#dump: Enable or disable the PVT internal binary data file logging [true] or [false]
PVT.dump=true