In 1.20.1, Forge and Fabric have different "common" tag conventions (for
instance, Forge uses forge:dusts/redstone, while Fabric uses
c:redstone_dusts). This means the generated recipes (and advancements)
will be different for the two loader projects. As such, we run data
generators for each loader, and store the results separately.
However, aside from some recipes and advancements, most resources /are/
the same between the two. This means we end up with a lot of duplicate
files, which make the diff even harder to read. This gets worse in
1.20.5, when NeoForge and Fabric have (largely) unified their tag names.
This commit now merges the generated resources of the two loaders,
moving shared files to the common project.
- Add a new MergeTrees command, to handle the de-duplication of files.
- Change the existing runData tasks to write to
build/generatedResources.
- Add a new :common:runData task, that reads from the
build/generatedResources folder and writes to the per-project
src/generated/resources.
Rather than mixing-in to CachedOutput, we just wrap our DataProviders to
use a custom CachedOutput which reformats the JSON before writing. This
allows us to drop mixins for common+non-client code.
Previously we prevented our published full jar depending on any of the
other projects by excluding the whole cc.tweaked jar. However, as Cobalt
also now lives in that group, this meant we were missing the Cobalt
dependency.
Rather than specifying a wildcard, we now exclude the dependencies when
adding them to the project.
Previously we had the invariant that if we had a server monitor, we also
had a terminal. When a monitor shrank into a place, we deleted the
monitor, and then recreated it when a peripheral was requested.
As of ab785a0906 this has changed
slightly, and we now just delete the terminal (keeping the ServerMonitor
around). However, we didn't adjust the peripheral code accordingly,
meaning we didn't recreate the /terminal/ when a peripheral was
requested.
The fix for this is very simple - most of the rest of this commit is
some additional code for ensuring monitor invariants hold, so we can
write tests with a little more confidence.
I'm not 100% sold on this approach. It's tricky having a double layer of
nullable state (ServerMonitor, and then the terminal). However, I think
this is reasonable - the ServerMonitor is a reference to the multiblock,
and the Terminal is part of the multiblock's state.
Even after all the refactors, monitor code is still nastier than I'd
like :/.
Fixes#1608
We can't use FriendlyByte.readCollection to read to a
pre-allocated/array-backed NonNullList, as that doesn't implement
List.add. Instead, we just need to do a normal loop.
We add a couple of tests to round-trip our recipe specs. Unfortunately
we can't test the recipes themselves as our own registries aren't set
up, so this'll have to do for now.
I removed this in aa0d544bba, way back in
late 2021. Looks like it's been updating in the meantime and I hadn't
noticed, so add it back.
I've simplified the code a little bit, to make use of our new capability
helpers, but otherwise it's almost exactly the same :D.
- Update to Loom 1.2 and FG 6.0. ForgeGradle has changed how it
generates the runXyz tasks, which makes running our tests much
harder. I've raised an issue upstream, but for now we do some nasty
poking of internals.
- Fix Sodium/Iris tests. Loom 1.1 changed how remapped configurations
are generated - we create a dummy source set and associate the
remapped configuration with that. All nasty stuff.
- Publish the common library. I'm not a fan of this, but given how much
internals I'm poking elsewhere, should probably get off my high
horse.
- Add renderdoc support to the client gametests, enabled with
-Prenderdoc.
- Split the front face of the computer model into two layers - one for
the main texture, and one for the cursor. This is actually a
simplification of what we had before, which is nice.
- Make the cursor layer render as an emissive quad, meaning it glows in
the dark. This is very easy on Forge (just some model JSON) and very
hard on Fabric (requires a custom model loader).
This adds two slots to the right of the turtle interface which contain
the left and right upgrades of a turtle.
- Add turtle_upgrade_{left,right} indicators, which used as the
background texture for the two upgrade slots. In order to use
Slot.getNoItemIcon, we need to bake these into the block texture
atlas.
This is done with the new atlas JSON and a data generator - it's
mostly pretty simple, but we do now need a client-side data
generator, which is a little ugly to do.
- Add a new UpgradeContainer/UpgradeSlot, which exposes a turtle's
upgrades in an inventory-like way.
- Update the turtle menu and screen to handle these new slots.
- Use GuiGraphics for rendering UI elements. Almost definitely some
z-fighting issues slipped in here.
- Use Forge's loot modifier system for handling treasure disks. I have
mixed feelings about this - it's a nice system, but also is far less
efficient than the previous approach.
- Regenerate data. This is the brunt of the commit, but nothing
especially interesting here.
This adds SPDX license headers to all source code files, following the
REUSE[1] specification. This does not include any asset files (such as
generated JSON files, or textures). While REUSE does support doing so
with ".license" files, for now we define these licences using the
.reuse/dep5 file.
[1]: https://reuse.software/
While it is a really nice library, it ends up being a bit overkill for
our needs - we don't need config syncing or anything. By NIHing our own,
we can drop one dependency and ease the updating burden a little.
Closes#1296
Mostly in prep for 1.19.4.
- Update to Loom 1.1.
- Simplifies our handling of remapped configurations a little.
- Removes the need for a fake fabric.mod.json in the API jar.
For reasons I don't quite understand, this required us to bump the
Fabric API version. Otherwise interfaces are not injected.
- Update to Rollup 3.0.
- Do NOT update NullAway: It now correctly checks @Nullable fields in
inherited classes. This is good, but also a pain as Minecraft is a
little over-eager in where it puts @Nullable.
- Fix client classes not being included in Forge.
- Only remap Nettty's HTTP classes, not all of them. This feels a
little more error prone - maybe we should jar-in-jar this in the
future.
- Use the correct refmaps on Forge.
- Prevent the Fabric jar pulling in some other mods.
Closes#1247
Lots of minor changes, but nothing too nasty - just tedious.
Known bugs/issues:
- REI and JEI haven't been updated at the time of writing, so our usage
of their APIs may be incompatible.
- Crash when opening the config UI in Fabric, as forgeconfigapi-port
hasn't been updated yet.
Will hold off on doing a release until those mods have updated.
- Update ForgeConfigAPI to the latest version, to fix the race
condition.
- Move WirelessNetwork lifecycle management to ServerContext.
- Some doc fixes.
- Remove deprecated API members in prep for 1.19.3. This allows us to
remove the mc-stubs and forge-stubs projects.
- Make several methods take a MinecraftServer instead of a Level (or
nothing at all).
- Remove I prefixes from a whole bunch of interfaces, making things a
little more consistent with Java conventions.
This avoids touching the "main" interfaces people consume for now. I
want to do that another Minecraft version, to avoid making the update
too painful.
- Remove IFileSystem and associated getters. This has never worked very
well and I don't think has got much (any?) usage.
- Add a new ClientJavaExec Gradle task, which is used for client-side
tests. This:
- Copies the exec spec from another JavaExec task.
- Sets some additional system properties to configure on gametest framework.
- Runs Java inside an X framebuffer (when available), meaning we
don't need to spin up a new window.
We also configure this task so that only one instance can run at
once, meaning we don't spawn multiple MC windows at once!
- Port our 1.16 client test framework to 1.19. This is mostly the same
as before, but screenshots no longer do a golden test: they /just/
write to a folder. Screenshots are compared manually afterwards.
This is still pretty brittle, and there's a lot of sleeps scattered
around in the code. It's not clear how well this will play on CI.
- Roll our own game test loader, rather than relying on the mod loader
to do it for us. This ensures that loading is consistent between
platforms (we already had to do some hacks for Forge) and makes it
easier to provide custom logic for loading client-only tests.
- Run several client tests (namely those involving monitor rendering)
against Sodium and Iris too. There's some nastiness here to set up
new Loom run configurations and automatically configure Iris to use
Complementary Shaders, but it's not too bad. These tests /don't/ run
on CI, so it doesn't need to be as reliable.
This fixes several issues I had with consuming multi-loader CC:T in
various upstream mods.
- Include /all/ sources in the Forge/Fabric jar. Before it was just the
common classes, and not the core or API.
- Use some Gradle magic to remove superfluous dependencies from the POM
file. Also make sure Cobalt and Netty are present as dependencies.
- Start using minimize() in our shadow jar config again.
- Add support for Fabric. This is mostly pretty simple, though does
require a lot more mixins than Forge.
Half this diff is due to data generators: we run them separately as
some aspects (recipes mostly) are different between the loaders.
- Add integration with Iris (same as our Oculus support) and REI
(mostly the same as our JEI support).
- Generic peripherals only support inventories (or rather
InventoryStorage) right now. Supporting more of the Fabric storage
API is going to be tricky due to the slotted nature of the API: maybe
something to revisit after Transfer API V3 (V4?, I've lost track).
Note, this does /not/ mean I will be publishing a Fabric version of
CC:T. My plan is to rebase CC:R on top of this, hopefully simplifying
the maintenance work on their end and making the two mods a little more
consistent.
