Finish the rest of the event documentation (#683)

doc/events/alarm.md

@@ -0,0 +1,21 @@
+---
+module: [kind=event] alarm
+see: os.setAlarm To start an alarm.
+---
+
+The @{timer} event is fired when an alarm started with @{os.setAlarm} completes.
+
+## Return Values
+1. @{string}: The event name.
+2. @{number}: The ID of the alarm that finished.
+
+## Example
+Starts a timer and then prints its ID:
+```lua
+local alarmID = os.setAlarm(os.time() + 0.05)
+local event, id
+repeat
+    event, id = os.pullEvent("alarm")
+until id == alarmID
+print("Alarm with ID " .. id .. " was fired")
+```

doc/events/computer_command.md

@@ -0,0 +1,18 @@
+---
+module: [kind=event] computer_command
+---
+
+The @{computer_command} event is fired when the `/computercraft queue` command is run for the current computer.
+
+## Return Values
+1. @{string}: The event name.
+... @{string}: The arguments passed to the command.
+
+## Example
+Prints the contents of messages sent:
+```lua
+while true do
+  local event = {os.pullEvent("computer_command")}
+  print("Received message:", table.unpack(event, 2))
+end
+```

doc/events/disk.md

@@ -0,0 +1,19 @@
+---
+module: [kind=event] disk
+see: disk_eject For the event sent when a disk is removed.
+---
+
+The @{disk} event is fired when a disk is inserted into an adjacent or networked disk drive.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side of the disk drive that had a disk inserted.
+
+## Example
+Prints a message when a disk is inserted:
+```lua
+while true do
+  local event, side = os.pullEvent("disk")
+  print("Inserted a disk on side " .. side)
+end
+```

doc/events/disk_eject.md

@@ -0,0 +1,19 @@
+---
+module: [kind=event] disk_eject
+see: disk For the event sent when a disk is inserted.
+---
+
+The @{disk_eject} event is fired when a disk is removed from an adjacent or networked disk drive.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side of the disk drive that had a disk removed.
+
+## Example
+Prints a message when a disk is removed:
+```lua
+while true do
+  local event, side = os.pullEvent("disk_eject")
+  print("Removed a disk on side " .. side)
+end
+```

doc/events/http_check.md

@@ -0,0 +1,14 @@
+---
+module: [kind=event] http_check
+see: http.checkURLAsync To check a URL asynchronously.
+---
+
+The @{http_check} event is fired when a URL check finishes.
+
+This event is normally handled inside @{http.checkURL}, but it can still be seen when using @{http.checkURLAsync}.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL requested to be checked.
+3. @{boolean}: Whether the check succeeded.
+4. @{string|nil}: If the check failed, a reason explaining why the check failed.

doc/events/http_failure.md

@@ -0,0 +1,39 @@
+---
+module: [kind=event] http_failure
+see: http.request To send an HTTP request.
+---
+
+The @{http_failure} event is fired when an HTTP request fails.
+
+This event is normally handled inside @{http.get} and @{http.post}, but it can still be seen when using @{http.request}.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL of the site requested.
+3. @{string}: An error describing the failure.
+4. @{http.Response|nil}: A response handle if the connection succeeded, but the server's response indicated failure.
+
+## Example
+Prints an error why the website cannot be contacted:
+```lua
+local myURL = "http://this.website.does.not.exist"
+http.request(myURL)
+local event, url, err
+repeat
+    event, url, err = os.pullEvent("http_failure")
+until url == myURL
+print("The URL " .. url .. " could not be reached: " .. err)
+```
+
+Prints the contents of a webpage that does not exist:
+```lua
+local myURL = "https://tweaked.cc/this/does/not/exist"
+http.request(myURL)
+local event, url, err, handle
+repeat
+    event, url, err, handle = os.pullEvent("http_failure")
+until url == myURL
+print("The URL " .. url .. " could not be reached: " .. err)
+print(handle.getResponseCode())
+handle.close()
+```

doc/events/http_success.md

@@ -0,0 +1,27 @@
+---
+module: [kind=event] http_success
+see: http.request To make an HTTP request.
+---
+
+The @{http_success} event is fired when an HTTP request returns successfully.
+
+This event is normally handled inside @{http.get} and @{http.post}, but it can still be seen when using @{http.request}.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL of the site requested.
+3. @{http.Response}: The handle for the response text.
+
+## Example
+Prints the content of a website (this may fail if the request fails):
+```lua
+local myURL = "https://tweaked.cc/"
+http.request(myURL)
+local event, url, handle
+repeat
+    event, url, handle = os.pullEvent("http_success")
+until url == myURL
+print("Contents of " .. url .. ":")
+print(handle.readAll())
+handle.close()
+```

doc/events/key.md

@@ -11,9 +11,9 @@
 event. If you are consuming text input, use a @{char} event instead!
 
 ## Return values
-1. [`string`]: The event name.
-2. [`number`]: The numerical key value of the key pressed.
-3. [`boolean`]: Whether the key event was generated while holding the key (@{true}), rather than pressing it the first time (@{false}).
+1. @{string}: The event name.
+2. @{number}: The numerical key value of the key pressed.
+3. @{boolean}: Whether the key event was generated while holding the key (@{true}), rather than pressing it the first time (@{false}).
 
 ## Example
 Prints each key when the user presses it, and if the key is being held.

doc/events/modem_message.md

@@ -0,0 +1,22 @@
+---
+module: [kind=event] modem_message
+---
+
+The @{modem_message} event is fired when a message is received on an open channel on any modem.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side of the modem that received the message.
+3. @{number}: The channel that the message was sent on.
+4. @{number}: The reply channel set by the sender.
+5. @{any}: The message as sent by the sender.
+6. @{number}: The distance between the sender and the receiver, in blocks (decimal).
+
+## Example
+Prints a message when one is sent:
+```lua
+while true do
+  local event, side, channel, replyChannel, message, distance = os.pullEvent("modem_message")
+  print(("Message received on side %s on channel %d (reply to %d) from %f blocks away with message %s"):format(side, channel, replyChannel, distance, tostring(message)))
+end
+```

doc/events/monitor_resize.md

@@ -0,0 +1,18 @@
+---
+module: [kind=event] monitor_resize
+---
+
+The @{monitor_resize} event is fired when an adjacent or networked monitor's size is changed.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side or network ID of the monitor that resized.
+
+## Example
+Prints a message when a monitor is resized:
+```lua
+while true do
+  local event, side = os.pullEvent("monitor_resize")
+  print("The monitor on side " .. side .. " was resized.")
+end
+```

doc/events/monitor_touch.md

@@ -0,0 +1,20 @@
+---
+module: [kind=event] monitor_touch
+---
+
+The @{monitor_touch} event is fired when an adjacent or networked Advanced Monitor is right-clicked.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side or network ID of the monitor that was touched.
+3. @{number}: The X coordinate of the touch, in characters.
+4. @{number}: The Y coordinate of the touch, in characters.
+
+## Example
+Prints a message when a monitor is touched:
+```lua
+while true do
+  local event, side, x, y = os.pullEvent("monitor_touch")
+  print("The monitor on side " .. side .. " was touched at (" .. x .. ", " .. y .. ")")
+end
+```

doc/events/mouse_drag.md

@@ -20,5 +20,3 @@ ## Example
   print(("The mouse button %s was dragged at %d, %d"):format(button, x, y))
 end
 ```
-
-

doc/events/mouse_up.md

@@ -19,6 +19,3 @@ ## Example
   print(("The mouse button %s was released at %d, %d"):format(button, x, y))
 end
 ```
-
-[`string`]: string
-[`number`]: number

doc/events/paste.md

@@ -0,0 +1,18 @@
+---
+module: [kind=event] paste
+---
+
+The @{paste} event is fired when text is pasted into the computer through Ctrl-V (or ⌘V on Mac).
+
+## Return values
+1. @{string}: The event name.
+2. @{string} The text that was pasted.
+
+## Example
+Prints pasted text:
+```lua
+while true do
+  local event, text = os.pullEvent("paste")
+  print('"' .. text .. '" was pasted')
+end
+```

doc/events/peripheral.md

@@ -0,0 +1,19 @@
+---
+module: [kind=event] peripheral
+see: peripheral_detach For the event fired when a peripheral is detached.
+---
+
+The @{peripheral} event is fired when a peripheral is attached on a side or to a modem.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side the peripheral was attached to.
+
+## Example
+Prints a message when a peripheral is attached:
+```lua
+while true do
+  local event, side = os.pullEvent("peripheral")
+  print("A peripheral was attached on side " .. side)
+end
+```

doc/events/peripheral_detach.md

@@ -0,0 +1,19 @@
+---
+module: [kind=event] peripheral_detach
+see: peripheral For the event fired when a peripheral is attached.
+---
+
+The @{peripheral_detach} event is fired when a peripheral is detached from a side or from a modem.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The side the peripheral was detached from.
+
+## Example
+Prints a message when a peripheral is detached:
+```lua
+while true do
+  local event, side = os.pullEvent("peripheral_detach")
+  print("A peripheral was detached on side " .. side)
+end
+```

doc/events/rednet_message.md

@@ -0,0 +1,30 @@
+---
+module: [kind=event] rednet_message
+see: modem_message For raw modem messages sent outside of Rednet.
+see: rednet.receive To wait for a Rednet message with an optional timeout and protocol filter.
+---
+
+The @{rednet_message} event is fired when a message is sent over Rednet.
+
+This event is usually handled by @{rednet.receive}, but it can also be pulled manually.
+
+@{rednet_message} events are sent by @{rednet.run} in the top-level coroutine in response to @{modem_message} events. A @{rednet_message} event is always preceded by a @{modem_message} event. They are generated inside CraftOS rather than being sent by the ComputerCraft machine.
+
+## Return Values
+1. @{string}: The event name.
+2. @{number}: The ID of the sending computer.
+3. @{any}: The message sent.
+4. @{string|nil}: The protocol of the message, if provided.
+
+## Example
+Prints a message when one is sent:
+```lua
+while true do
+  local event, sender, message, protocol = os.pullEvent("rednet_message")
+  if protocol ~= nil then
+    print("Received message from " .. sender .. " with protocol " .. protocol .. " and message " .. tostring(message))
+  else
+    print("Received message from " .. sender .. " with message " .. tostring(message))
+  end
+end
+```

doc/events/redstone.md

@@ -0,0 +1,14 @@
+---
+module: [kind=event] redstone
+---
+
+The @{redstone} event is fired whenever any redstone inputs on the computer change.
+
+## Example
+Prints a message when a redstone input changes:
+```lua
+while true do
+  os.pullEvent("redstone")
+  print("A redstone input has changed!")
+end
+```

doc/events/task_complete.md

@@ -0,0 +1,28 @@
+---
+module: [kind=event] task_complete
+see: commands.execAsync To run a command which fires a task_complete event.
+---
+
+The @{task_complete} event is fired when an asynchronous task completes. This is usually handled inside the function call that queued the task; however, functions such as @{commands.execAsync} return immediately so the user can wait for completion.
+
+## Return Values
+1. @{string}: The event name.
+2. @{number}: The ID of the task that completed.
+3. @{boolean}: Whether the command succeeded.
+4. @{string}: If the command failed, an error message explaining the failure. (This is not present if the command succeeded.)
+...: Any parameters returned from the command.
+
+## Example
+Prints the results of an asynchronous command:
+```lua
+local taskID = commands.execAsync("say Hello")
+local event
+repeat
+    event = {os.pullEvent("task_complete")}
+until event[2] == taskID
+if event[3] == true then
+  print("Task " .. event[2] .. " succeeded:", table.unpack(event, 4))
+else
+  print("Task " .. event[2] .. " failed: " .. event[4])
+end
+```

doc/events/term_resize.md

@@ -0,0 +1,15 @@
+---
+module: [kind=event] term_resize
+---
+
+The @{term_resize} event is fired when the main terminal is resized, mainly when a new tab is opened or closed in @{multishell}.
+
+## Example
+Prints :
+```lua
+while true do
+  os.pullEvent("term_resize")
+  local w, h = term.getSize()
+  print("The term was resized to (" .. w .. ", " .. h .. ")")
+end
+```

doc/events/terminate.md

@@ -0,0 +1,25 @@
+---
+module: [kind=event] terminate
+---
+
+The @{terminate} event is fired when <kbd>Ctrl-T</kbd> is held down.
+
+This event is normally handled by @{os.pullEvent}, and will not be returned. However, @{os.pullEventRaw} will return this event when fired.
+
+@{terminate} will be sent even when a filter is provided to @{os.pullEventRaw}. When using @{os.pullEventRaw} with a filter, make sure to check that the event is not @{terminate}.
+
+## Example
+Prints a message when Ctrl-T is held:
+```lua
+while true do
+  local event = os.pullEventRaw("terminate")
+  if event == "terminate" then print("Terminate requested!") end
+end
+```
+
+Exits when Ctrl-T is held:
+```lua
+while true do
+  os.pullEvent()
+end
+```

doc/events/timer.md

@@ -0,0 +1,21 @@
+---
+module: [kind=event] timer
+see: os.startTimer To start a timer.
+---
+
+The @{timer} event is fired when a timer started with @{os.startTimer} completes.
+
+## Return Values
+1. @{string}: The event name.
+2. @{number}: The ID of the timer that finished.
+
+## Example
+Starts a timer and then prints its ID:
+```lua
+local timerID = os.startTimer(2)
+local event, id
+repeat
+    event, id = os.pullEvent("timer")
+until id == timerID
+print("Timer with ID " .. id .. " was fired")
+```

doc/events/turtle_inventory.md

@@ -0,0 +1,14 @@
+---
+module: [kind=event] turtle_inventory
+---
+
+The @{turtle_inventory} event is fired when a turtle's inventory is changed.
+
+## Example
+Prints a message when the inventory is changed:
+```lua
+while true do
+  os.pullEvent("turtle_inventory")
+  print("The inventory was changed.")
+end
+```

doc/events/websocket_closed.md

@@ -0,0 +1,21 @@
+---
+module: [kind=event] websocket_closed
+---
+
+The @{websocket_closed} event is fired when an open WebSocket connection is closed.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL of the WebSocket that was closed.
+
+## Example
+Prints a message when a WebSocket is closed (this may take a minute):
+```lua
+local myURL = "ws://echo.websocket.org"
+local ws = http.websocket(myURL)
+local event, url
+repeat
+    event, url = os.pullEvent("websocket_closed")
+until url == myURL
+print("The WebSocket at " .. url .. " was closed.")
+```

doc/events/websocket_failure.md

@@ -0,0 +1,25 @@
+---
+module: [kind=event] websocket_failure
+see: http.websocketAsync To send an HTTP request.
+---
+
+The @{websocket_failure} event is fired when a WebSocket connection request fails.
+
+This event is normally handled inside @{http.websocket}, but it can still be seen when using @{http.websocketAsync}.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL of the site requested.
+3. @{string}: An error describing the failure.
+
+## Example
+Prints an error why the website cannot be contacted:
+```lua
+local myURL = "ws://this.website.does.not.exist"
+http.websocketAsync(myURL)
+local event, url, err
+repeat
+    event, url, err = os.pullEvent("websocket_failure")
+until url == myURL
+print("The URL " .. url .. " could not be reached: " .. err)
+```

doc/events/websocket_message.md

@@ -0,0 +1,26 @@
+---
+module: [kind=event] websocket_message
+---
+
+The @{websocket_message} event is fired when a message is received on an open WebSocket connection.
+
+This event is normally handled by @{http.Websocket.receive}, but it can also be pulled manually.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL of the WebSocket.
+3. @{string}: The contents of the message.
+
+## Example
+Prints a message sent by a WebSocket:
+```lua
+local myURL = "ws://echo.websocket.org"
+local ws = http.websocket(myURL)
+ws.send("Hello!")
+local event, url, message
+repeat
+    event, url, message = os.pullEvent("websocket_message")
+until url == myURL
+print("Received message from " .. url .. " with contents " .. message)
+ws.close()
+```

doc/events/websocket_success.md

@@ -0,0 +1,28 @@
+---
+module: [kind=event] websocket_success
+see: http.websocketAsync To open a WebSocket asynchronously.
+---
+
+The @{websocket_success} event is fired when a WebSocket connection request returns successfully.
+
+This event is normally handled inside @{http.websocket}, but it can still be seen when using @{http.websocketAsync}.
+
+## Return Values
+1. @{string}: The event name.
+2. @{string}: The URL of the site.
+3. @{http.Websocket}: The handle for the WebSocket.
+
+## Example
+Prints the content of a website (this may fail if the request fails):
+```lua
+local myURL = "ws://echo.websocket.org"
+http.websocketAsync(myURL)
+local event, url, handle
+repeat
+    event, url, handle = os.pullEvent("websocket_success")
+until url == myURL
+print("Connected to " .. url)
+handle.send("Hello!")
+print(handle.receive())
+handle.close()
+```