2023-03-15 21:52:13 +00:00
|
|
|
// SPDX-FileCopyrightText: 2022 The CC: Tweaked Developers
|
|
|
|
//
|
|
|
|
// SPDX-License-Identifier: MPL-2.0
|
|
|
|
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
package dan200.computercraft.client.pocket;
|
|
|
|
|
2024-04-25 19:17:43 +00:00
|
|
|
import dan200.computercraft.shared.ModRegistry;
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
import dan200.computercraft.shared.computer.core.ComputerState;
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
import dan200.computercraft.shared.computer.core.ServerComputer;
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
import dan200.computercraft.shared.computer.terminal.TerminalState;
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
import dan200.computercraft.shared.network.client.PocketComputerDataMessage;
|
2022-10-25 21:36:21 +00:00
|
|
|
import net.minecraft.world.item.ItemStack;
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
import javax.annotation.Nullable;
|
|
|
|
import java.util.HashMap;
|
|
|
|
import java.util.Map;
|
|
|
|
import java.util.UUID;
|
|
|
|
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
/**
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
* Maps {@link ServerComputer#getInstanceUUID()} to locals {@link PocketComputerData}.
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
* <p>
|
|
|
|
* This is populated by {@link PocketComputerDataMessage} and accessed when rendering pocket computers
|
|
|
|
*/
|
|
|
|
public final class ClientPocketComputers {
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
private static final Map<UUID, PocketComputerData> instances = new HashMap<>();
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
|
|
|
|
private ClientPocketComputers() {
|
|
|
|
}
|
|
|
|
|
|
|
|
public static void reset() {
|
|
|
|
instances.clear();
|
|
|
|
}
|
|
|
|
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
public static void remove(UUID id) {
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
instances.remove(id);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
* Set the state of a pocket computer.
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
*
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
* @param instanceId The instance ID of the pocket computer.
|
|
|
|
* @param state The computer state of the pocket computer.
|
|
|
|
* @param lightColour The current colour of the modem light.
|
|
|
|
* @param terminalData The current terminal contents.
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
*/
|
2024-04-25 17:19:34 +00:00
|
|
|
public static void setState(UUID instanceId, ComputerState state, int lightColour, @Nullable TerminalState terminalData) {
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
var computer = instances.get(instanceId);
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
if (computer == null) {
|
2024-03-26 21:54:48 +00:00
|
|
|
instances.put(instanceId, new PocketComputerData(state, lightColour, terminalData));
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
} else {
|
2024-03-26 21:54:48 +00:00
|
|
|
computer.setState(state, lightColour, terminalData);
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
}
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
}
|
|
|
|
|
Replace integer instance IDs with UUIDs
Here's a fun bug you can try at home:
- Create a new world
- Spawn in a pocket computer, turn it on, and place it in a chest.
- Reload the world - the pocket computer in the chest should now be
off.
- Spawn in a new pocket computer, and turn it on. The computer in chest
will also appear to be on!
This bug has been present since pocket computers were added (27th March,
2024).
When a pocket computer is added to a player's inventory, it is assigned
a unique *per-session* "instance id" , which is used to find the
associated computer. Note the "per-session" there - these ids will be
reused if you reload the world (or restart the server).
In the above bug, we see the following:
- The first pocket computer is assigned an instance id of 0.
- After reloading, the second pocket computer is assigned an instance
id of 0.
- If the first pocket computer was in our inventory, it'd be ticked and
assigned a new instance id. However, because it's in an inventory, it
keeps its old one.
- Both computers look up their client-side computer state and get the
same value, meaning the first pocket computer mirrors the second!
To fix this, we now ensure instance ids are entirely unique (not just
per-session). Rather than sequentially assigning an int, we now use a
random UUID (we probably could get away with a random long, but this
feels more idiomatic).
This has a couple of user-visible changes:
- /computercraft no longer lists instance ids outside of dumping an
individual computer.
- The @c[instance=...] selector uses UUIDs. We still use int instance
ids for the legacy selector, but that'll be removed in a later MC
version.
- Pocket computers now store a UUID rather than an int.
Related to this change (I made this change first, but then they got
kinda mixed up together), we now only create PocketComputerData when
receiving server data. This makes the code a little uglier in some
places (the data may now be null), but means we don't populate the
client-side pocket computer map with computers the server doesn't know
about.
2024-03-17 12:21:21 +00:00
|
|
|
public static @Nullable PocketComputerData get(ItemStack stack) {
|
2024-04-25 19:17:43 +00:00
|
|
|
var id = stack.get(ModRegistry.DataComponents.COMPUTER.get());
|
|
|
|
return id == null ? null : instances.get(id.instance());
|
Remove ClientComputer
Historically CC has maintained two computer registries; one on the
server (which runs the actual computer) and one on the client (which
stores the terminal and some small bits of additional data).
This means when a user opens the computer UI, we send the terminal
contents and store it in the client computer registry. We then send the
instance id alongside the "open container" packet, which is used to look
up the client computer (and thus terminal) in our client-side registry.
This patch makes the computer menu syncing behaviour more consistent
with vanilla. The initial terminal contents is sent alongside the "open
container" packet, and subsequent terminal changes apply /just/ to the
open container. Computer on/off state is synced via a vanilla
ContainerData/IIntArray.
Likewise, sending user input to the server now targets the open
container, rather than an arbitrary instance id.
The one remaining usage of ClientComputer is for pocket computers. For
these, we still need to sync the current on/off/blinking state and the
pocket computer light.
We don't need the full ClientComputer interface for this case (after
all, you can't send input to a pocket computer someone else is
holding!). This means we can tear out ClientComputer and
ClientComputerRegistry, replacing it with a much simpler
ClientPocketComputers store.
This in turn allows the following changes:
- Remove IComputer, as we no longer need to abstract over client and
server computers.
- Likewise, we can merge ComputerRegistry into the server
registry. This commit also cleans up the handling of instance IDs a
little bit: ServerComputers are now responsible for generating their
ID and adding/removing themselves from the registry.
- As the client-side terminal will never be null, we can remove a whole
bunch of null checks throughout the codebase.
- As the terminal is available immediately, we don't need to explicitly
pass in terminal sizes to the computer GUIs. This means we're no
longer reliant on those config values on the client side!
- Remove the "request computer state" packet. Pocket computers now
store which players need to know the computer state, automatically
sending data when a new player starts tracking the computer.
2022-10-21 17:17:42 +00:00
|
|
|
}
|
|
|
|
}
|